I use 3.6.6. When you print from Firefox, the document is shrinked to print in the upper left 1/4 of the page. I tried to change the page layout to "reduced to fit page width" and "scale - 100". " No change. I can print normally from other applications.

Similar Questions

• Using script - library locked when you try to add the file to it

  Hello

  I'm just a simple script that I can run with my engines of the action, so if I add new enum values I can create new wrappers quickly. I am able to create a new VI on disk, but when I try to add the the VI to the library, I get "error 1562: library, or the specified project is locked." Just before adding the article, I tried to adjust the State of the library "Not locked", but has not been the tower.

  Directions to see the error:

  Open attached zip file

  Open 'Engine.lvlib Action '.

  Run "Script - Create Wrapper.vi.

  Please let me know how to get around this, I thank you,

  Gregory

  There are two reasons at least a library locks: 1) something he possesses is running, 2) is open in two or more instances of the application.  (This applies to classes too.)

  I started a project and took your scripts out of the library (to avoid the #1) and then open your Library Reference by path in your script, be sure to include the reference of the application (to avoid the #2).

  Works now.  (With the exception of the Init.vi but you mentioned earlier that you knew about it. But point 1 and 2 of article work fine.)

• When you create keyframes on the timeline, why it sometimes to add Bezier handles and sometimes not?

  OK, so one of the key steps in my workflow is to make a manual pass audio "normalizing." Yes, I get the feeling that it could be automated tools that could do a better job, but I'm also listening to the content.

  But what makes me a little crazy right now, is that sometimes, the ctrl-click adds a normal keyframe and other times, it adds a handful of order for a Bezier curve. It is especially common when you are speed bumps, but it is just so inconsistent it makes me crazy.

  I'm working on a script and in the middle of the sequence, there is a clip where he also adds Bezier curves. And when I try to drag the keyframe down, he grabs the Bezier handle instead, creating this weird S-curve.

  I don't know what I'm doing differently in this segment compared to other places. Hundreds, if not thousands of changes such as this and I have not encountered a problem like this.

  Undo and do that again causes the same thing.

  But one segment, creating keyframes does not create Bezier handles.

  ????????

  Production Premium CS6

  If you click ctrl you add a linear keyframe TI you ctrl click (accidental?) again in this key frame, it turns into an auto Bezier

• When you type in Firefox, the cursor moves to the left while everything is written backwards.

  Recently, whenever I try to type so that Firefox 9.01, the cursor moves to the left while everything is written backwards. I can normally type into a word document to have done with it and cut and pasted in this message. I use Windows XP. I closed Firefox and restarted my computer twice with no success to solve this problem.

  Maybe this recent thread on the issue even helps.

  • [910552/questions/910552] It started a few days ago firefox will type back

• Windows media player error "Windows Media Player has encountered a problem when you try to read the file" after burning CDs.

  Original title: "missing songs" in my windows media player then burn them on several cd :((

  I burned songs to several cd using my Windows media player to make different Cd, but after I returned to my library all the songs that I burned to the CD have disappeared, they are there, but they won't play it is as if they have been deleted, a window appears saying that windows media player has encountered a problem when you try to play the file. I did not notice this until after Cd burning a few I can't do more because if I keep going I'm not going to have more songs in my library! I don't know what to do im going crazy, it took me a long time to get all of these songs and now he disappeared! I have Windows 7 Ultimate is the version 12.0.7601.17514 hope that helps

  Hello
   
   
  They were playing before you burn CDs?
   
   
  Method 1:
  
  Open the troubleshooting Windows Media Player settings Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter
  Open the troubleshooter in the Windows Media Player library:
  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-library-Troubleshooter
  
  Method 2:
  
  This problem may be due to database corruption. You can delete the Windows Media Player database and check if the problem persists.

  Steps to clear the database of windows media player:

  a. exit Windows Media Player.
  b. Click Start, run, type %LOCALAPPDATA%\Microsoft\Media Player and then click OK.
  c. Select all files in the folder and then click on Delete on the file menu.

  Note you don't have to remove the folders that are in this folder.

  d. restart Windows Media Player.

  Note: Windows Media Player automatically rebuilds the database.

  If this does not resolve the problem, disable the Windows Media Player database cache files. To do this, follow these steps:

  a. exit Windows Media Player.

  b. Click Start, click Run, type % LOCALAPPDATA%\Microsoft and then click OK.

  c. Select the Media Player folder, and then click on Delete on the file menu.

  d. restart Windows Media Player.

  Note Windows Media Player automatically rebuilds the database.

• HP Officejet 4630: Printing on both sides, no option to turn off when you print a Word Doc; When printing Pages

  Recently, when printing, the printer appear uses both sides of the paper, even when we don't want him. There is no option to turn it off when you print a Word document.

  
  When printing Pages it shows a checked box that says BOTH SIDES, if I uncheck, then it works.

  

  But from Word, there is no other choice. I tried the file/Preferences, I tried through the printer settings and nothing we can find will solve this problem? This has recently (last week or two) become a problem...

  Thank you!

  Hello @LaylaWi,

  Welcome to the Forums of HP Support!

  I would like to help you to solve the problem of double-sided printing that you experience when you try to print single-sided computer Mac OS X 10.9 to your HP Officejet 4630 e-all-in-one printer today. Please follow the steps below to disable duplex printing.

  1. Open a Word document
  2. Select file , and then click print
  3. Click on the drop down menu to the Copies and Pages and modify this provision
  4. Uncheck duplex .
  5. To change the additional print settings click on view details.

  -Source

  Ultimately, judging by the useful screenshots that you included in your post, you are in the right place to disable two-sided. You just need to click on the Copies & Pages for the appropriate options.

  Please reply to this message with the result of your troubleshooting. Good luck!

• When you print from Windows Live Mail, there is truncation to the right of the page

  Original title: printing from Live Mail (Windows 7)
  -----

  I have a new laptop (x 64) with preload Windows 7.
  When printing of Live Mail, there is truncation to the right of the page.
  Y at - it a solution or a fix for this?
  A fix has been tried, but he said "is not suitable for your computer" (or similar).

  Please answer all the questions of diagnostic following by number in your very next answer (no need to quote this post):

  1. when (date about) don't you buy the computer?

  2A. how long has your new computer connected to the internet activate you the free trial-McAfee?

  2B. is the McAfee McAfee Security Centerapplication?

  3. Once you plugged your new computer to the internet, which you did everything first: (a) activate the free trial McAfee or (b) check for & install Windows updates?

  4A. do you see this truncation on the right when printing all messages in Windows Live Mail (WLMail) or only some?

  4B. If you change your printer settings from Portrait to landscape mode (or vice versa), is the truncation persist?

  4 c. are you see this truncation when you print a web page in IE, too?

  5. you use IE8 or IE9? [1]

  =====================================
  [1] according to this page, Canon has not yet released a compatible with IE9 for your printer driver.

• Printing too low with the exception of the first and the last page when you print multiple pages documents.

  Original title: Question of impression

  It is a new problem; I printed documents several pages in the past without problem. When you print multiple pages on my Office Jet 8000, first & last pages are not bad, but the Middle pages are too weak to read. I initially set for last page of print jobs.   Test pages are fine. I am using genuine HP 940 X cartridges.  I print only 'black '.

  M.

  You should contact HP since it is certainly a printer problem.  We support the MS software & hardware here.

• How to stop the print cover sheet when you print using eprint? I have a B211A 6510

  When you print using eprint address, I get an in addition to the document cover sheet.  I'm wasting paper and ink.  How can I stop this page from printing?

  There are a few options depending on where you are sending from. If it is a document that you join I guess its from a PC, but I'll give you the mobile option as well.

  The HP ePrint app on devices like iphones and ipads, or home HP ePrint and biz app on android, allows open files and send them via eprint not at home without actually sending an email. In other words, there is nothing in the body of an email to print. The link below you shows how to start with this app and use it.

  http://support.HP.com/us-en/document/c01616126

  The other option is the use of the pilot of mobile eprint from your computer. Add a printing device of your pc that actually sends jobs through eprint by clicking Print on the file menu. Using this method, you can print the elements of any application that supports printing, and you have the advantage of being able to specify duplex printing (if supported on your model) and the number of copies. It also means that you won't have to save the file, open an e-mail, attach them to an email and then send it. It is done simply by clicking file, print, and then choosing the printer after the initial installation. The link below you ask your operating system and will then download and manual on how to use the software.

  http://h20000.www2.HP.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=5098101&lang=en&cc=us&TaskID=135&prodSeriesId=5098100&prodTypeId=22744

  If you have any questions post method here is and I would be happy to help.

• When you print an image in Windows Photo Viewer, is there a way to do that is to ensure 'fit picture to the frame' * not * checked by default?

  Just as the title says:

  When you print an image in Windows Photo Viewer, is there a way to do that is to ensure 'fit picture to the frame' * not * checked by default?

  Hello

  It is normal in the Windows Photo Viewer Photo to adapt to the frame is checked.

  Print a photo

  http://Windows.Microsoft.com/en-us/Windows7/print-a-picture

• Shows HP LaserJet 3330 horizontal lines exactly each 1.5 "when you print a completely blank page

  HP LaserJet 3330 shows seven or eight approximately 3.5 "cloudy horizontal lines spaced exactly each 1.5" even when you print a completely white page. This also happens when copy and fax.

  There are also 2 very thin vertical lines running down the entire page about in the middle. They are exactly 1 "apart.

  However, a scan of a blank page on my computer (not printed) is perfectly clean.

  Windows 7. No change or upgrade.

  Propbably the toner cartridge, if they are 1.48 "apart that it could be the cylinder in the process of development or the charge roll who are both in the toner cartridge. So a good assumption if you replace the toner cartridge, the problem will disappear. Vertical lines could also be part of this issue.

• When you print pages in Internet explorer 9, the color is good, but black is extremely light

  When you print pages in Internet explorer 9, the color is good, but black is extremely light (Please note-not the toner) led 2135cn MFP color lazer

  Hello

  Thanks for asking! If I understand correctly, you are facing problem with printing from Internet Explorer, which prints very light black color.

  Before you continue troubleshooting, I would get the little information.

  1. have there been recent changes to the system before the show?

  2 is the issue limited to printing through Internet Explorer?

  3 are you facing this problem with any specific Web sites?

  4. do this problem occurs when you print through the files/applications?

  5. have you checked for ink levels?

  It seems to be that the ink in the cartridge must be completed. In the meantime I suggest you carry out these methods.

  Method:

  Follow the link and run the troubleshooting printertroubleshooter. Check if it helps.

  For additional information refers: link 1,link 2,link 3     

  Answer us with the results. I'd be happy to help you further.

• Acrobat to print DC question. When you print all the pages in my PDF printer, Acrobat creates a HUGE file. Looks like it is including all the signature features.  How to disable this option?

  When you print a simple PDF document on my printer (PDFXchange) PDF creates a huge file.

  For example, I have a PDF without features signature inside. It is 723KB.

  When I ask my CD player to print on my printer, it generates a file 19, 591 KB.

  How can I avoid that my CD player to make these large files?

  I think that it is related to the "Signature" whole feature that has been added to Reader 11.  Because before that, my impression works beautifully.

  Thank you

  Rich

  Sorry, would of noticed earlier that you said that you were using a third-party printer.

  I think it's probably just a matter of settings, but if you were able to solve it by downgrading to XI, then this is good...

• My page is printed too high. When you print the report of diagnosis of iMac, top of page letters are cut off the page

  I have a hp c310a all-in-one.  When you print cd labels, graphics look good on preview before printing, but when it comes to the printer off, the graphics are about 1/4 "too high, which leaves the low" 1/4 of my blank cd label.  I printed a report of quality Diagnostic print from my mac and it came out too high.  Cut the top of the report, it began printing until the paper is correctly positioned.  When you print the Diagnostic Report of quality printing directly from the touchsmart on my printer screen, the report will print very well.  I wonder if there is a setting miss me when I go on my printout.

  Hello

  This really sounds like a parameter of the wrong paper on the computer, type or wrong size setting can cause these issues, especiallly it seems to work perfectly when printing directly from the camera.

• When you print a file, change the font to 'Label'.

  Is it possible that I can change the "label" font when you print a file... Here's my number

  I can print a picture very well...

  However, when I check the box of the label to print the label with him... I get an error page of my printer... some overflow of stack or something... So it's obviously from the label... I think maybe it's the police or something...

  I'm using CS5 Design Premium for Mac... I also have snow leopard installed.

  Please let me know if anyone has any ideas! Thank you

  Mouhib

  You cannot change the font.

  There is also a bug in the code of the label that is displayed if the file name is longer then 15 characters. Sorry, but that's probably what you see.