I use 8 Captivate. Here's my problem: I have a slide that has narration in the background.  I want to stay on the slide until the story is complete, no matter if the user steh bittun click Next and allow it to

Similar Questions

• Could someone tell me that I have a laptop that is compatible with the adapter wireless Athreos in it and it catches an unsecured, network shown as next (automatic) for the SSID (network name). Please tell me how to connect...

  Could someone tell me that I have a laptop that is compatible with the adapter wireless Athreos in it and it catches an unsecured, network shown as next (automatic) for the SSID (network name). I tried parameter as point of access, AD-hoc, Connect automatticaly etc but will not connect... Please tell me how to connect...

  Hi Sumit and thanks for posting.

  Your Athreos has never connected? If it has connected then it not only connects it to insecure networks? Also after can trying to connect you do the following?

  Start, run, CMD, OK to open a command prompt:

  Type the following command:

  IPCONFIG/ALL

  [Note that there is no space between the oblique and ALL bar].

  Right click in the command window and choose Select all, and then press ENTER.
  Paste the results in a message here.

  I hope this helps. After the back if you have any questions.

  Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Upgrade to 8.1 fails "you must use an account with administrator privileges to install Windows 8.1." "Try loggin with the user of an administrator on this PC account and try the update again.

  Hello

  I have some difficulties to try to upgrade to windows 8... The computer asked me to go to 8.1, I click OK and it sends me to the store. Then I click on "Download Windows 8.1 Pro" and I get the message:
  "You must use an account with administrator privileges to install Windows 8.1." Try loggin with the user of an administrator on this PC account and retry the update", as shown in the attached picture.

  The thing is that I am the only administrator account.
  I also checked enable the built-in Administrator, by logging in and trying to here, but from the account built-in administrator is not aloud me to use Store.

  What can I do? Thank you

  Original title: upgrade Windows 8 Pro x 64 to Windows 8.1

  Hello

  I've read reports that uninstalling Windows Update KB2871389, and then put it back solves the problem.

  I read recently that this Fix - It might help...

  http://support.Microsoft.com/kb/971058/en-us

• installed the game CD Gears of War on my computer (Windows VISTA) and make me "Please insert the correct DVD - ROM, click OK and restart the application" - but the disk is IN the drive.

  original title: Gears of War for PC (Vista)

  I installed Gears of War game CD on my computer (Windows VISTA) and make me "Please insert the correct DVD - ROM, click OK and restart the application" - but the disk is IN the drive.  I've been on the net and does not know what is the problem and why this game will not run.  I've installed, uninstalled, reinstalled tried to run as administrator, got the latest patch, all the things that have said all sites to do - anyone have any ideas?  Any help would be appreciated!  Thank you!

  Hi NoOneSpeciale,

  It is very possible that your CD may be damaged.  Is it possible to get another copy to try on your machine? Or try this copy on another machine to see if it works or not.
  Also check in control panel--> system--> for you Device Manager make sure that there is no yellow/red icon next to the CD player and it's function correctly.

  Let us know the result, Kevin
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• My iPhone my iPhone 5 guard by clicking on things at random, by clicking on the things im not clicking on and freeze momentarily. But the screen is not cracked

  My iPhone 5 guard by clicking on things at random, by clicking on the things im not clicking on and freeze momentarily. But the screen is not cracked

  You should go to the apple store and ask them to check it for you! You may have a faulty screen or faulty motherboard! in any case it is best to call or go to the apple store

• I transferred my Lightroom 5.7.1 my cell phone to my PC. I put in the serial number, you press "next" and another box came up saying that the updated code was for and upgraded version and I should put in the old version the serial number - this I can't f

  I transferred my Lightroom 5.7.1 my cell phone to my PC. I put in the serial number, you press "next" and another box came up saying that the updated code was for and upgraded version and I should put in the old version the serial number - this that I can't find

  you will need to this previous version number and serial number.

  If you purchased the previous version of adobe or registered with adobe, check your account: ID Adobe

  in otherwise, find the serial number of your product Adobe quickly

• I have a slide show full frame, which works great, but is there a way to keep "next" arrows "prev" aligned vertically when the browser size changes? Also is there is way to add a border to a slide show full frame as well?

  I have a slide show full frame, which works great, but is there a way to keep "next" arrows "prev" aligned vertically when the browser size changes?

  Or a way to pin things generally vertically centered?

  Also is there is way to add a border to a slide show full frame as well?

  Thank you

  Hello.  For the problem of alignment, of the research this window https://helpx.adobe.com/muse/using/objects.html#Pinning%20objects%20to%20the%20browser%20w

  For once, click once on the slide show, and then click New. In this way you access the first image. Determine the race it and view it in the browser. It should work.

• Currency of the line has changed since the user interface has been made on creating

  Hi all
  
  I'm ' currency of the line has changed since the user interface has been made. " The key to the planned line was oracle.jbo.Key' error on create action. Use case is simple. He saw table and create a button. When I click the Create button, I get this error. Back button of the browser is never used.
  
  The strange thing is that I don't get this error when I run my application on your premises. However, after I had it deployed in real development environment, he started up this error and I do not get this error on other pages.
  
  JDeveloper Version: 11.1.2.2.0 (JSF 2.0)
  Weblogic Version development environment: 11.1.1.6
  
  Kind regards
  Anil

  Same question: do you have the correct version of the runtime ADF your server?

  Timo

• Sense of "component of this VI connector is not a part of the connector that is specified by the user."

  That means the following message from VI Analyzer: "part of connector of this VI is not a part of the connector that is specified by the user."?

  The VI it references has 4 connections: 2 in. and 2 outputs. He was selected from a template.

  Everywhere where the VI that it references is used is relinked and properly connected.

  While it has been warned?

  As it says, this is just a warning.

  Many programmers standardize on a small selection of models of connector. VI Analyzer will tell you if a different connector pane is used. One of your screws apparently uses a connector part 2 x 2, which is not used very often. (Example (1) it must be changed if you need connectors later, (2) it does not match the gap-type-in and error-out lower terminals, (3) if it is mounted in series with subVIs most popular models, the son will have elbows and things not the line-up, etc..)

  Two choices:

  1. If you are really in love with the part of connector 2 x 2, add it to the configuration of the parser as a reason accepted.
  
  
  2. Stick to a more standardized connector component, even if not all the connectors are currently used.

• I received a call from a woman said that she was with the ICC with Windows service provider and that they were getting the error messages from my computer

  * Original title: scam or not

  I received a call from a woman saying that she was with the ICC with Windows service provider and they received my computer error messages and I wouldn't be able to help me solve it.  I asked for a number of 800-373-4609 because he came unknown on my phone.

  I wanted to open my computer.  I told her I would call her back.

  Is it a scam?

  (Moved from P & M)

  Yes, it's a scam. When someone calls and says they need to talk to you about 'mistakes' in your computer, simply hang up.  I just had one of these calls myself about 15 minutes ago.

• Had problems with Windows 8 Pro that I bought after the pre version, seems when I tried to reinstall it, kept getting no configure after installation.

  Had problems with Windows 8 Pro that I bought after the pre version, seems when I tried to reinstall it, kept getting no configure after installation.  So I tried a full install without success.  Can you please give some tips to overcome this problem?  I lost the back upward with the resettlement, don't know how, but I have a QuadCore intel 9650 memory of 8 GB, 560 GTX GPU, 120 GB SSD.  Can I install windows 7 ultimate, but I prefer Windows 8 Pro and don't want to pay for it again.

  I suggest you reinstall Windows 7 first, then use your existing Windows 8 Pro key and reinstall Windows 8 Pro from the following link:

  You can download it from there and use your product key to upgrade:

  http://Windows.Microsoft.com/en-GB/Windows-8/upgrade-product-key-only

  You will need to reactivate by phone:

  Activation of the phone:

  1. press the Windows key + X , and then click run, and then type: slui.exe 4

  2. then press the ENTER"" key.

  3. Select your "country" in the list.

  4. choose the option "activate phone".

  5. stay on the phone (do not select/press all options) and wait for a person to help you with the activation.

  6. explain your problem clearly to the support person.

• Current version of the data in the database has changed since the user initiated the update process.

  Hello

  I get this error message: when I update a table.

  • Current version of the data in the database has changed since the user initiated the update process. version of current line identifier = "4975F66067C6EE412FF51DF46B8C4916" line application version identifier = "31163419BE48C198DE88A34AD12FE4D2".

  I get this message when a process is used to run an update on the same table.

  BEGIN

  RUN IMMEDIATELY "UPDATE CONTRATS_MAINTENANCE SET EMAIL_SENDED = 0 WHERE ID =: 1' WITH THE HELP OF: P27_ID;"

  END;

  There is an automated line (DML) process process on the table on this page.

  
  

  I understand that I get this error message because I update the database EMAIL_SENDED in the same table column and tha the automated process line try to update the same table...

  On this page, I want to the column EMAIL_SENDED always has the value 0 (zero). It is a database column

  How to do?

  Thank you for your help.

  Christian

  If you try to make it through a normal form. So in this case email_sended is getting two values one of your FORM and one of your update statement.

  To resolve this problem, you can code in hard EMAIL_SENDED point the value '0' and keep only the database column.

  If the whenver update you will automatically take the value 0.

  Another solution would be to remove this column from your FORM and then update by creating a process after submit.

  BR,

  Patrick

• Can I hire the CC Adobe as a person and use it in a business without generating any legal problems for the company? I'm in the Brazil and the Adobe Web site, that I have not found that everything related to the legislation, they apply in this country on t

  Can I hire the CC Adobe as a person and use it in a business without generating any legal problems for the company? I'm in the Brazil and the Adobe Web site, that I have not found that everything related to the legislation, they apply in this country on this issue.

  single user licenses allow you to use the adobe corporate programs and allow to sell the products that you create using adobe programs.

• Current version of the data in the database has changed since the user has launched the process of update: tabular

  Hi people

  Version of the apex is 4.2

  Oracle database: 11.2.0.2

  I have created a simple form in a table on a table with the following structure

  {code}

  Name                                                  Null?    Type

  ----------------------------------------------------- -------- --------------

  TID NOT NULL NUMBER

  TEAM_NAME VARCHAR2 (30)

  EMP_NAME VARCHAR2 (30)

  DATE OF REPORT_DATE

  CATEGORY_NAME VARCHAR2 (30)

  NUMBER OF CATEGORY_HR

  CATEGORY_COMMENT VARCHAR2 (120)

  CREATED_DT                                                     DATE

  CREATED_BY VARCHAR2 (30)

  STATUS VARCHAR2 (1)

  {code}

  In the form of default table is

  {code}

  Select

  TID,

  TID TID_DISPLAY,

  TEAM_NAME,

  EMP_NAME,

  REPORT_DATE,

  CATEGORY_NAME,

  CATEGORY_HR,

  CATEGORY_COMMENT,

  CREATED_DT,

  CREATED_BY

  of ' #OWNER # '. " TIMESHEET.

  {code}

  I wanted to add an additional line inserted in the tabular presentation, that's why I included 'UNION ALL' in the query like this

  {code}

  Union of all the

  Select

  TID, null,

  tid_display null,

  team_name null,

  emp_name null,

  report_date null,

  category_name null,

  category_hr null,

  category_comment null,

  created_dt null,

  created_by null

  of the double

  {code}

  After having done that, I can see a blank line on the form of tables, but each time I fill data in the fields and press the "SUBMIT" button, I get the below error

  Current version of the data in the database has changed since the user has launched the process of update

  Thank you

  Navneet

  Why are you insert an extra line manually in tabular from?  There is a feature to add a line.

  If you want to insert a blank line when the page loads, then create dynamic action, this is a most appropriate feature.

  If you manually insert an extra line so that you have to write the update for this procedure.

  Leave.

• Fields on several Internet sites have been changed in another language. The browser is set to English, and this problem does not occur with Chrome.

  Fields on several Internet sites have been changed in another language. The browser is set to English, and this problem does not occur with Chrome. Specifically, a large part of Tumblr and Facebook menu has been changed in another language (Russian, I think). I tried reinstall Firefox, clear the cache and reset firefox to its default state. None of them helped. Any suggestions on how to fix this?

  Hey again,

  Sometimes a problem with Firefox can be a result of malware installed on your computer, you may not be aware of.

  You can try these free programs to search for malicious software that work with your existing anti-virus software:

  • Microsoft safety scanner
  • MalwareBytes' Anti-Malware
  • TDSSKiller - AntiRootkit utility
  • Hitman Pro
  • ESET Online Scanner

  Microsoft Security Essentials is a good permanent antivirus for Windows 7/Vista/XP, if you do not already have one.

  More information can be found in the article troubleshooting Firefox problems caused by malware .

  I hope this helps!

  Curtis