Upgrade to 8.1 fails "you must use an account with administrator privileges to install Windows 8.1." "Try loggin with the user of an administrator on this PC account and try the update again.

Similar Questions

• Error - you must use an account with administrator privileges to install Windows 8.1

  Original title: Windows 8 installs 8.1 Windows Update even though I am the administrator

  Hello, I recently brought an Alienware X 51 with Dell Windows 8, I installed all the updates, now that I see the Windows 8.1 update in the store, I clicked on it and I clicked on download it came with this message.

  Store

  You must use an account that has administrator privileges to install Windows 8.1. try to connect with the user of an administrator on this PC account and retry the update

  now, I understand that I am the administrator of my PC and the only administrator of my PC anyway I signed on my Microsoft Account that I use for my PC and signed again the problem is the message came again and continues to come and I cannot update my Alienware X 51 with Windows 8 and Windows 8.1 if someone could help me solve this problem , it would be very useful and that they would have my gratitude.

  Hello

  I've read reports that uninstalling Windows Update KB2871389, and then put it back solves the problem.

  I read recently that this Fix - It might help...

  http://support.Microsoft.com/kb/971058/en-us

  I noticed an update of windows has posted recently for my 8.1 Win correct problems with the store...

  You can check to see if she shows up to win 8 also... I can't remember the number of KB unfortunately.

• Error message "You must use an account with administrator privileges to install windows 8.1..." When you try to download Windows 8.1

  ORiginal title: cannot download Windows 8.1 due to problems of administrator

  Hello

  I just got a new laptop, Dell Inspiron 15R with pre-installed Windows 8. Aware of the Windows 8.1 update I logged on my account (which represent the highlights of settings I have administrative privileges) has sailed to the store windows and clicked on the download tab Update button. I received this error message that I couldn't fix:
  "You must use an account with administrator privileges to install windows 8.1." Try connecting with the user of an administrator on this PC account and retry the update"
  I am the only user of this computer and as such am probably the only person capable or able to be an administrator. Does anyone have a solution?
  Thanks in advance.

  Hi Paul,.

  Uninstall the update of KB2871389 and then manually download and install it can help get the problem solved.

  Perform the steps suggested by anon_no_name from the link below and see if it helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows8_1-windows_install/Windows-81-will-not-download-from-the-store/d3c57b8b-ACD2-4BD9-82e4-1b51b206e311

  Note: Click on the below link to download and install the update manually

  http://support.Microsoft.com/kb/2871389/en-us

  Answer please if you have any questions.

• You can use a control with the premier surface / audition?

  Is there an area of control or Tablet out there that works seamless with the Prime Minister and hearing? I clean up audio on the daily and must work super fast. My wrists are starting to kill me and I need to put in place. I would use my mouse and keyboard as little as possible!

  Everything I do in hearing can be quick access keys. I do not work with multitrack. A lot of cleaning of the dialog box.
  Everything I do to the Prime Minister, again, is simple and can be quick access keys

  Would love some dials to zoom / scroll / audio gain... all this is constant.

  All the control surfaces that can be used with hearing are intended for mixing. Thus they consist mainly of a Bank of faders, buttons and touches of channel selection as well as the transport controls. They are not really a program of prophylaxis of the governed. However, one that might be of interest is Contour Designs' http://ergo.contour-design.com/ergonomic-mouse/shuttlepro-v2. There is a certain button models already available for hearing and well first they are all customizable user with the provided editing software.

• I cannot acess my main profile and you must use the guest account

  I cannot acess my main profile and you must use the guest account

  Hello

  There may be several error messages and/or other conditions however these methods
  should help you regain access.

  If you suspect any malware, a system restore is an option:

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
  ---------------------------------------------------------------------------------------------------------------------------

  Other methods:

  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
  Mode has no default password (unless someone has changed the password so it should be available).

  Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
  has been known to cause this problem.

  Error message when you log on a Windows Vista-based or Windows 7 using computer a
  Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
  http://support.Microsoft.com/kb/947215

  How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "your user profile was not loaded correctly! You have been connected with a
  temporary profile. "in Vista
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  BE VERY CAREFUL IF YOU USE THIS ONE:

  DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.

  How to enable or disable the real built-in Administrator account in Vista
  http://www.Vistax64.com/tutorials/67567-administrator-account.html

  Use the Admin account hidden to lower your user account APPLY / OK then wear again to
  ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after the
  above message.

  You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
  password (or two with the same password) use a test or difficulty to another.

  You can run the Admin account hidden from the prompt by if necessary.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  If you cannot access your old account, you can still use an Admin to migrate to another (don't forget
  always leave to an Admin who is not used except for testing and difficulty account).

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  I hope this helps.

• Error 1430 to copy in Untitled 1. Possible reasons: LabVIEW: the path is empty or a parent. You must use an absolute path.

  I wrote a code to copy a file to a folder IE C:\Folder1:\Hello.txt to another folder C:\Folder2. But it shows an error in the copy. Is to show that 1430 error to copy in Untitled 1. Possible reasons: LabVIEW: the path is empty or a parent. You must use an absolute path.  Can someone help me please how to fix this problem. I've also attached the VI. Thanking you.

  Hello

  Change while loop to loop For!

  Kind regards

• Get the message: "You must use this file" when trying to compress the files saved on the desktop

  Original title: to compress my files that I have saved on my desktop.

  I get this error after I do a right-click and "send to" compress a file...

  "you must use this folder.

  So, what should I do?

  Hi thegardengrand,

  This happens usually if all files in the folder or the folder is used by all programs that are running in windows.

  You can check if it is used by another program, then that and close then try to zip.

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Whenever I try to update Acrobat XI 11.0.07 I get the error message: the update could not be applied because Adobe Application Manager is running. Please close Adobe Application Manager and look for updates again. This happened for months,

  Whenever I try to update Acrobat XI version 11.0.07 I get the error message: "the update could not be applied because Adobe Application Manager is running." Please close Adobe Application Manager and look for updates again. »

  
  

  This happened for months and still fails in the same way.

  You can download Acrobat pro XI of the same link:

  https://helpx.Adobe.com/Acrobat/KB/Acrobat-downloads.html

• You have attempted to connect with the password wrong too many times. Please try again later.

  I think I tried something like 4 - 5 times. Then I reset the pwd. After the reboot, the message appeared (the counter needs to be reset too once I reset the pwd). If only the system would have said e more soon as I have a few attempts I would have been more careful when you type in the pwd (I could remember, so I tried a bit of my common pwd).

  Now I can't use my account, and I would like to know what "try again later" means exactly. Next time? Tomorrow? Next month? I have a kind of urgent need of making an international phone call. Unfortunately with a motive to the Japan is bit tricky and I could still not managed to get a. I was hoping to use Skype, but it seems that the only option I have is to find somewhere near a public phone in the room.

  OK, I was able to post so the password worked now.

  Can delete the whole post.

• You must use view client for windows to access view server connection"

  When I go to my security on the outside, I get a message in 5.1, but 5.0 would simply run the installation of the client.  Is this new 5.1?  "You must use view client for windows to access the server view connection."

  Well Yes new feature. Is VMware view Client unbundling

  Take a look at

  http://www.VMware.com/files/PDF/view/VMware-view-evaluators-Guide.PDF

  from pg 87

  On page 88, he says

  Portal of the view on the login server see the landing Page

  The URL root view connection server is hosting a view portal or download customer portal, as the default value, the destination page. The page contains instructions to launch an existing customer of the view and a link to a download page to the VMware.com website that contains a client compatible with the detected operating system version.

  The portal of the view is more directly initiates a Client installation view, but instead allows the user to manually call the installation process.

• With the updated 31.4.0 version - demand for return confirmation and email send priority disappeared. How can I access them now? Thank you!

  With the updated 31.4.0 version - demand for return confirmation and email send priority disappeared.
  How can I access them now?

  Thank you!

  Did? I find in the title bar of the alternatives

• I just wanted to know at all, if you encounter a problem with the update of creative cloud as if I was (error 1001), I discovered that my Webroot AntiVirus has been the origin of the problem. I turned it off and it updated correctly. Hope that helps some

  I just wanted to know at all, if you encounter a problem with the update of creative cloud as if I was (error 1001), I discovered that my Webroot AntiVirus has been the origin of the problem. I turned it off and it updated correctly. Hope that helps some people I've seen so angry about it here by searching for the answer myself.

  Thanks for sharing this, yes turning Firewall works.

  Concerning

  Stéphane

• in most programs, F11 will take you full screen.  in adobe reader, you must use Ctrl-L.   F11 can be added to adobe reader as a shortcut for mode full screen?

  in most programs, F11 will take you full screen. in adobe reader, you must use Ctrl-L. F11 can be added to adobe reader as a shortcut for mode full screen?

  Hi hanekam123,

  I'm sorry, that is not possible, that is how Acrobat/Reader is built. For drive mode, you can use Ctrl + L to fullscreen or Ctrl + H.

  Kind regards
  Nicos

• Iterate through the DB using DBcursor-> get with the DB_DBT_USERMEM flag set for DBT

  BDB works in mode TDS. You want to iterate over a database using a DBcursor from beginning to the end. set the flag DB_DBT_USERMEM on the structure of the DBT with data pointing to a block of memory allocated fixed size to organize content in a single record reading. Currently the cursor get fails with DB_BUFFER_SMALL. I guess that's because the cursor-> get retrieves several records.
  
  It is possible to iterate over the DB using the cursor said while allocating memory for only a 1 user database? Each call to cursor-> get with DB_NEXT / DB_PREV / DB_FIRST DB_LAST etc. would be updated of the unique registration entry.

  Hi Kedar,

  No, DBcursor-> get() picked up several key/data elements if you are using the DB_MULTIPLE or DB_MULTIPLE_KEY flags. See "Bulk Retrieval:
  [http://www.oracle.com/technology/documentation/berkeley-db/db/programmer_reference/am_misc_bulk.html#am_misc_bulk_get]
  You want only to retrieve a single record per call, so do not use the above indicators. In this case, the DB_BUFFER_SMALL error indicates that the length of the item requested/retrieved is greater than that specified for the DBT via his "ulen" field
  [http://www.oracle.com/technology/documentation/berkeley-db/db/api_reference/C/dbt.html#dbt_DB_DBT_USERMEM]
  If you want to iterate through all the records in the database (including duplicates, if the database is configured to support), you must use the DB_NEXT flag.
  Note that when the DB_BUFFER_SMALL error returned the field 'Size' of the DBT is on the length needed for the item requested; You can check this value to determine how the size of your buffer provided (or you can know in advance the size of the items in the database).
  Here is an excerpt of the example code to "Retrieve records with a cursor" with the necessary adjustments for the TCD data:
  [http://www.oracle.com/technology/documentation/berkeley-db/db/programmer_reference/am_cursor.html#am_curget]

       DB *dbp;
       DBC *dbcp;
       DBT key, data;
       int close_db, close_dbc, ret;
  
       //...
  
       /* Acquire a cursor for the database. */
       if ((ret = dbp->cursor(dbp, NULL, &dbcp, 0)) != 0) {
            dbp->err(dbp, ret, "DB->cursor");
            goto err;
       }
       close_dbc = 1;
  
       /* Initialize the key/data return pair. */
       memset(&key, 0, sizeof(key));
       memset(&data, 0, sizeof(data));
  
       /* Retrieve data item in user suplied buffer. */
  #define BUFFER_LENGTH 1024
       if ((data.data = malloc(BUFFER_LENGTH)) == NULL)
            return (errno);
       data.ulen = BUFFER_LENGTH;
       data.flags = DB_DBT_USERMEM;
  
       /* You can supply your own buffer for the key as well. */
  
       /* Iterate through the database. */
       while ((ret = dbcp->c_get(dbcp, &key, &data, DB_NEXT)) == 0)
            /* Operate on the retrieved items. */
       if (ret != DB_NOTFOUND) {
            dbp->err(dbp, ret, "DBcursor->get");
            goto err;
       }
  
  err:
       // ...
  

  Kind regards
  Andrei

• >: everyone is having the same problem with all the days that I have now with the update on thursda after update, it could not be started "could not find xpcom" restored Dáil

  with the update of daily Thursday (Australia) after update owned couldn't boot received message "could not find xpcom.
  I then restored by day sauvegardΘ installed upgrading again every day would not restart with the same message
  I tried again on Saturday you have the same problem
  I'm now ignoring the update message that is very annoying because he wants me to update daily

  The bug in question should be solved with a daily update of today. However, I agree with the recommendation to go with 31.0 once it comes out next Tuesday, or at least to use the beta versions (once per cycle) as a compromise between stability and get the latest features and updates to the platform.