I use Encore CS6. When I try to burn a BluRay disc I get the error: "" code: 3, create sequence stc cannot write file M2S "." This error is only when in the project are more then a (menu or chapter or timeline)

Similar Questions

• I have Production Premium with Encore CS6.  I created my first HD project, tested and received no error but when I went to 'Building' my project still on a BluRay disc, I got the error message "ERROR CORE 03".  How do I get this project on a B

  I have Production Premium with Encore CS6.  I created my first HD project, tested and received no error but when I went to 'Building' my project still on a BluRay disc, I got the error message "ERROR CORE 03".  What should I do to get this project on a BluRay disc?

  In response to both Richard & Stan.  I received the error message ""device error", Code '3' notes Create Sequence of STC: cannot write file M25.»  Or something very similar to this, but I think it was exactly that.  It was my first HD project but used several times to make projects sustainable development without problems that were not of my own creation.  So it was a shock and cost me money and the failure to meet a deadline.  What I did: on-screen 'Build '.

  Format: Blu - ray,

  Output: Blu - ray Image,

  Source: Currrent project,

  Destination: I Browse... d a location appropriate.  He managed a Blu - ray image.

  Using reminder once again, step 2 - on-screen 'Build '.

  Format: Blu - ray,

  Released: Blu - ray Disc,

  Source: Disk Image,

  Destination: my disc drive that holds a blank Blu - ray disc.  He managed a Blu - ray disc.

  Then I found a job step 2 autour for the problem.  My question is this: I pay $70.00 / month ca to the people Adobe cloud to keep their software up to date and work as advertised.  I do not think I should spend a few hours and lose money looking for a problem created Adobe not yet keeping cs6, updated and works as promised.  I submit my first bug report.  My suspicion is that adobe considers that Blu - ray is out of style, and they do not care to correct this bug in still cs6.

  I'd love to know the thoughts of others on this.

• When I try to print from photoshop cc I get the message "the instruction at 0xb660643f referenced memory at 0 x 00000006. the memory could not be read. I'm running on Windows using Intel (R) Graphics 4600 8.1

  When I try to print from photoshop cc I get the message "the instruction at 0xb660643f referenced memory at 0 x 00000006. the memory could not be read. I run on Windows using Intel (R) Graphics 4600 8.1. Can someone help me with this?

  Hi Tanuj,

  Thanks for your reply. The problem seems to be a damaged printer driver. I tried to print from my laptop computer rather than my PC and that worked OK. I downloaded the latest driver for the Epson 3880 but then find that the print spooler has become invalid. When I restarted the print spooler, everything worked again and I'm able to print as usual.

  Concerning

  Gordon

  Gordon Gentles

  [email protected]

• When I try to run Microsoft Safety Scanner, I get an error signatures are not signed error code: 0x8050A005.

  When I try to run Microsoft Safety Scanner, I get an error that the signatures are not signed (x8050A005)). Can someone help me with this?

  I suggest the Windows Defender update and run full system scan with it. Windows 8 build already with Windows Defender, which is anti-virus and Anti-Spyware.

• I bought items at Best Buy December 14, 24. I'm trying to use it on a MacBook Pro OSx 10.10.5 (Yosemite). While I try to put in place, I could get the serial number, but when I type in Adobe says that it cannot validate it. That is what it is?

  I bought items at Best Buy December 14, 24. I'm trying to use it on a MacBook Pro OSx 10.10.5 (Yosemite). While I try to put in place, I could get the serial number, but when I type in Adobe says that it cannot validate it. That is what it is?

  you have a number of redemption?  If so, https://redeem.licenses.adobe.com/getserial

  If your redemption number is reported as invalid, please contact adobe for hourly pst support by clicking here and, when it is available, click "still need help," https://helpx.adobe.com/contact.html

  If you have a serial number, install your software using this serial number.

• When I try to renew my IP address I get the error: the rpc server is unavailable.

  I'm not getting Ip Add. in my laptop. When I try to renew the ip with IPCONFIG/renew it gives error the rpc server is unavailable. If I try to start this service in services.msc, that she does not get any changes.

  Thank you & best regards

  Aniket

  I would like to check the status of the Services.

  Click on the Start button and select Control Panel, administrative tools, Services. Locate the RPC end point Mapper in the list and make sure that the startup type is automatic. If it is not set to automatic, right-click and select Properties, general tab. There is a box after the startup type. The options are available in a menu drop-down by clicking on the down arrow to the right of the box. Make the change and click apply and then click OK. Restart the computer and verify if it has started.

  Hope this helps, Gerry Cornell

• When I try to add a VPN connection, I get an error that the wizard is unable to connect. I am running Windows Vista.

  When I try to add a VPN connection, I get an error that the wizard is unable to connect.  I am running VISTA. I want to simply add a VPN and be able to connect to a non-profit organization where I volunteer.  My VPN working two weeks ago.  Then my shortcut did not work, and this problem started.

  Any help is appreciated.

  original title: VPN Vista issues

  Hello

  Thank you for visiting the Microsoft answers community site. Your question of Windows Vista is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Windows Vista Networking forum.

  http://social.technet.Microsoft.com/forums/en-us/category/windowsvistaitpro

• When I try to burn a music disc player is registered as a DATA reader and does not allow me to copy music files that I can play on an external source

  I have computer aGateway running Vista Home Edition and something happened with WIndows Media Player.   I have the DVD/RW internal drive and external DVD/RW as a player.  I use them mainly to copy music files and it has always worked fine until yesterday.

  When I try to burn a music disc, the player is registered as a DATA reader and does not allow me to copy music files that I can play on an external source (such as the CD or car drive).  Worked fine Saturday and had burned discs Saturday night recognizes the two drives as data drives.

  Is it something that needs to be reset or changed?

  In WMP, please click the button burn up and make sure that the Audio CD is selected. Then try burning the CD again, they now play on a standalone CD player too.

• uninstalled Java, try t re-in-stall, cannot because of "this action is only valid for products that are currently installed Windows 7.

  Having Windows 7 Service Pack 1.  Had to uninstall Java/Pogo games but when you try to reinstall Java a window pops up saying, "this action is only valid for products that are currently installed.

  I used Revo UN-install, but when I checked the Panel he showed Java with a folder instead of the Java icon.  I tried to find what file or folder, it is the case, find nothing.  Please help if you can.

  Thank you.

  This sounds like your problem? - http://forums.whatthetech.com/index.php?showtopic=104537&hl=This+action+only+valid+products+that+currently+installed+Windows

  It lists the reg keys his looking, then you might check to see if you put them before doing anything.

  Back up your registry and set a restore point before taking any action - assuming that is your problem.

  Also, if you download and run the file, AV check it before running it - just in case.

  NOTE: the above was found by google, I have not tried that I have not had the error. I can't say if it works or not.

  
  

  PS - Also, FYI, while the research I found this http://support.microsoft.com/kb/893048 , but it seems specific to XP - SP2. Don't know if there is an equivalent W7.
  

• When I try to set up "Remote support" I get the error message: "your current system settings prevent you from sending an invitation. How can I solve this problem?

  Using Windows XP Profwssional.

  (1) when I try to set up "Remote support" I get the error message: "your current system settings prevent you from sending an invitation. How can I solve this problem?

  (2) can I use this feature when both computers are on the same network?

  Hello

  (1) you must configure your computer to use the remote control - see here:

  http://www.winxptutor.com/raenable.htm

  and don't forget to make the firewall exceptions

  (2) this function works on the different network also (so a computer can be in the United States and one in Australia)

  Note - a computer can have Windows XP (family or professional edition) and another may have Windows 7, Vista.

  LC

• When I start thesystem I get 2 errors in netdolst.dll and qWaves32.dll are missing

  When I start thesystem I get 2 errors in netdolst.dll and qWaves32.dll are missing, how and where can I download free others these files, the computer works fine except that when I start the system is very slow, and then displays error messages I tried the system restore, but this does not seem worked either I don't think restore points do not appear to contain everything that I never really use the restore of the system but like I said system works well except that I am living in a retirement home and cannot afford these packages fantasies you can send me an email to * address email is removed from the privacy * I'd highly appreciate your help as soon as possible because I am one of those who dislikes computers I would prefer to give me error messages can you send me instructions instead of put in place on the forum you can do it too if you want to thank you for your help, I am not an expert in computers, so I need a step by step instructions

  qWAVE.dll (without the "s32") is a legitimate file for Vista and Windows 7 but not XP.

  Searches on Google for "qwaves32.dll" and "netdolst.dll" increase only highly questionable links.

  When a search in no hits or suspicious hits result, the answer is usually that the file in question is linked to the malicious software and your anti-malware application has deleted or quarantined file, but left to the Windows registry entry that tries to start the malicious software when you start your computer.  Given that you know on torrents (and downloaded them?) increases the likelihood that you had (or still have) malicious software on your computer.

  First of all, download, install, update and run both of these free analysis tools:
  MalwareBytes AntiMalware
  SUPERAntiSpyware

  Do not run the scans at the same time.  They can take some time, so start an and then go for a non computer chore for awhile.

  If the scans does not solve the problem (and they can't, because the actual malware dll file has already been processed), then download and run Autoruns.  Click on the "Connection" tab and look in the column 'Image path' for the dll named in your error message.  If it is not displayed in the connection tab, click the "all" tab and use the file > search tool.  A characteristic of the search of Autoruns tool is that you must move the selection under the element line "found" before you "Find Next."

  Once you find the line with the file in question, either "delete" or (if you want to be safer) uncheck the box.  The latter prevents the line running, but you can reactivate it later by removing the check mark.

• When I try to turn on "Windows Defender" I get an error message "ox800106ba".

  Original title: error 0x800106ba.

  When I try to turn on "Windows Defender" I get an error message "ox800106ba".
  How can I activate the Windows Defender?

  Hello

  If you use Norton, AVG, Avira, Microsoft Security Essentials, McAfee, etc. the default action is for Windows Defender must be disabled, that these AntiVirus programs have their own Antispyware Applications.

  There is nothing to worry.

  Using both programs at the same time can cause system conflicts, etc.

  If you are using one of the above AntiVirus programs, this Information from David O - Support Engineer shows you how to manually enable Windows Defender (disregard information from uninstalling; not possible in Vista):

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/how-do-i-manually-start-Windows-Defender-in-Vista/dab845b2-9ba5-47F3-9518-c4c6781e7d5b

  "Go to start, Control Panel, Administrative Tools, Services. Look for Windows Defender.

  Right click and select Properties , ensure that Startup Type is automatic.

  Once modified, click apply and OK.

  Quit and restart your computer. Check the back take the same path to confirm that Windows Defender has started"

  .

  If you want to have additional protection against malware using the version FREE of Malwarebytes AntiMalware:

  http://www.Malwarebytes.org/products/malwarebytes_free

  And for now, change startup Vista programs without using Defender, use one of these methods:

  "How to use MSCONFIG in Windows Vista"

  http://netsquirrel.com/Msconfig/msconfig_vista.html

  Or the program Autoruns for FREE:

  "V11.21 Autoruns for Windows"

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

  See you soon.

• Question: CP9: color of the web page outside of the project area.

  CP9, HTML5, output only.

  Hello

  Question: How can I change the color of the web page outside of the project area?

  I want that my projects in 100% white as in example 1.

  I tried changing all kinds of options on the slide master and made sure that both projects have the same settings, but I still get a gray color as in example 2.

  (If the solution is to edit the index.html file or any other file I'm happy about it).

  Any help will be much appreciated.

  Thank you

  Peter.

  Example 1

  This project page is 100% white.

  

  Example 2

  This is another project, but the page outside of the project area is a very pale gray.

  

  Hi Peter,.

  You can change the color of the HTML box around the Captivate project from:

  1. in the menu bar, click themes and select the skin editor.

  2. in the skin Editor window, open the borders page (second means of icon on the left, under the name of skin).

  3. in the theme section, specify the background color of the HTML.

  This solves your question?

• When you try to download photoshop elements 13 I get the following message - signature download adobe photoshop elements 13 (1) exe is damaged or invalid

  When you try to download photoshop elements 13 I get the following message - signature download adobe photoshop elements 13 (2) exe is corrupted or invalid what can I do

  redownload.

  If the problem persists, use a different browser or another wired connection or a download manager.

  or if you follow the 7 steps you can directly download a free trial here: Adobe Photoshop elements 13 Direct Download Links, first too. ProDesignTools

  and activate it with your serial number.

  If you have a problem from the download, you follow the 7 steps, or your browser does not accept cookies.

  the most common problem is caused by failing to meticulously follow the steps 1, 2, and/or 3 (which adds a cookie to your system, allowing you to download the correct version of the adobe.com site).

  failure to obtain this cookie translates into an error page displayed after clicking on a link on prodesigntools.com or initiates the download of an incorrect (e.g., current) version.

• When I try to log in my account, I get the message "a network error occurred while trying to connect.  How can I fix it?

  When I try to log in my account, I get the message "a network error occurred while trying to connect.  How can I fix it?

  Hi Mark,

  Are you trying to connect through Adobe Reader? If so, what happens when you connect via the web interface at https://cloud.acrobat.com?

  (We had reports of this error occurring in the latest version of the reader.)

  Best,

  Sara