cannot access the web page of WAP but can telnet

Similar Questions

• Update XP Sp2 to Sp3. cannot access the web page update

  The page cannot be displayed

  The page you are looking for is currently unavailable. The Web site may be experiencing technical difficulties, or you may need to adjust your browser settings.

  Please, try the following: Click the Refresh button, or try again later. If you typed the page address in the address bar, make sure that it is spelled correctly. To check your connection settings, click the Tools menu and then click Internet Options. On the connections tab, click settings. The settings should match those provided by your local area network (LAN) administrator or Internet (ISP) services provider. See if your Internet connection settings are detected. You can configure Microsoft Windows to examine your network and automatically detect network connection settings (if your network administrator has enabled this setting). Click on the Tools menu, and then clickInternet Options. In the connections tab, click LAN settings. Select automatically detect settings, and then clickOK. Some sites require 128-bit connection security. Click on the menuhelp and click About Internet Explorer to determine what you have installed the security force. If you are trying to reach a secure site, make sure that your security settings can support. Click on theTools menu, and then click Internet Options. On the Advanced tab, scroll to the Security section and check settings for SSL 2.0, SSL 3.0, TLS 1.0, PCT 1.0. Click the back button to try another link. Cannot find server or DNS error Internet Explorer I can access other web pages OK.

  Burty,

  See... http://support.microsoft.com/kb/265847 this article has been written about products for which microsoft no longer offers support. Accordingly, this article is offered "as what ' and longerbe not updated

• Cannot access the web page of the wrt54gx router

  I configured my wrt54gx as point of access by disabling the DHCP and assigning static IP address 192.168.0.6. My main router is a wrt310n. My access point works very well when it is connected with a wire to the wrt310n.

  I want to reonfigure the wrt54gx to use it as a main router again. To do this, I am unable to connect to the webpage wrt54gx.

  Any suggestions?

  Thank you

  You should be able to connect to the WRT54GX and configure it from there.  If it does not, simply unplug the WRT54GX of your other router and reset to the default values by using this procedure:

  To reset your router by default, follow these steps:

  (1) turn off all computers, the router and the modem and disconnect from the wall.
  (2) disconnect all the wires of the router.
  (3) turn on the router and let it start up completely (1-2 minutes).
  (4) press in and hold the reset for 30 seconds button, then release it, then let the router reset and restart (2-3 minutes).
  (5) turn the router.
  (6) connect a computer cable to port 1 of the router (NOT to the internet port).
  (7) turn on the router and let it start up completely (1-2 minutes).
  (8) the power of the computer (if the computer has a wireless card, make sure it's off).
  (9) try ping on the router. To do this, click the 'Start' button > all programs > Accessories > command prompt. A black DOS window will appear. Enter the following text: "ping 192.168.1.1" (without the quotes) and press the Enter key. You will see 3 or 4 lines that begin with ' response to... ". "or"Request timed out". If you see "reply from...". ", your computer has found your router.
  (10) open your browser and point it to 192.168.1.1. This will take you to the login page of your router. Leave the user name blank and in the password field, enter "admin" (without the quotes). This will take you to your router configuration page. Note the version number of your firmware (usually found near upper right corner of the screen). Exit your browser.

  If you get this day without problem, try the Setup disk (or configure the router manually, if you prefer) and see if you can get your work and router configuration.

  If you can not ' response to... ". "in step 9 above, your router is probably dead. A report with this problem

  If you get a response in step 9, but cannot complete step 10, is that your router is dead or the firmware is damaged. Related to this issue.

  If you need additional assistance, please indicate your ISP, the make and model of your modem, the firmware version of your router and the results of steps 9 and 10. In addition, if you receive error messages, copy them exactly, and report.

  Please let me know how things turn out for you.

• try to pay some bills and cannot access the Web page. I make each month and do not know how to correct it. does not that this program can not display the page's Web site

  happening only on a few sites of bill payment.

  Hello
  
  1. what internet browser do you use?
  2. If you are using Internet Explorer which version do you have installed?
   
  If you use Internet Explorer see the methods below.
   
  Method 1.
  I recommend you follow the steps listed in the article below and check.
  You cannot connect to or connect to Web sites in Internet Explorer secure
  http://support.Microsoft.com/kb/813444
  
  Method 2.
  If the problem persists, add sites to the trusted Web site and check. Refer to the article below for the procedure.
  Security zones: adding or removing websites
  http://Windows.Microsoft.com/en-us/Windows7/security-zones-adding-or-removing-websites
  
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• having a wireless connection can only connect at home, at work, he says internet explore cannot display the Web page

  I have a laptop when I use the wireless at home I have no problem, but when I use the internet at work I can not connect it says Internet Explore cannot display the Web page so I have no internet access

  Can you help me

  Try to run diagnose connection problem, if it is in the work, you will probably need to configure some additional things such as VPN or Proxy, try to contact your IT Department and ask them.

• Gets the user cannot display the Web page when she tries to connect to hotmail.

  I try on another pc in which the user of that pc had its hotmail upward.  She took him out and tried to connect to his account and got the cannot display the Web page. She said she crossed and tried all of the suggestions that he gives.  I tried to use Internet Explorer and Firefox.  When the user is at home that she can get hotmail.  There is no settings on our firewall prevents the user to access hotmail.

  Hello, Tiffany Walker,.

  The best place to ask your question of Windows Live is inside Windows Live help forums. Experts specialize in all things, Windows Live, and would be delighted to help you with your questions. Please choose a product below to be redirected to the appropriate community:

  Windows Live Mail

  Windows Live Hotmail

  Windows Live Messenger

  Looking for a different product to Windows Live? Visit the home page Windows Live Help for the complete list of Windows Live forums to www.windowslivehelp.com.

• When I get an email through incredimail cannot connect hypertext links. It is up to this cannot display the web page

  hyperlinks in emails in incredimail

  When I get an email through incredimail cannot connect hypertext links. It is up to this cannot display the web page

  When I get an email through incredimail cannot connect hypertext links. It is up to this cannot display the web page

  You must contact the Support of Incredimail for that matter.

• I downloaded the Adobe Premiere Pro CS6 product for free trail.  Now, there is one last month, when I try click on 'buy now' cannot display the web page.  What is the problem?  The trail is over?

  I downloaded the Adobe Premiere Pro CS6 product for free trail.  Now, there is one last month, when I try click on 'buy now' cannot display the web page.  What is the problem?  The trail is over?

  Hello

  Contact please contact customer service

  Kind regards

  Gag

• Cannot access the Web Configuration of RE1000 page once I have connected to my wireless network

  I can't access the Setup page of my wireless range Extenders RE1000 via IP 192.168.1.1 address once I have connected the Extender to my wireless network.  I was connected to the router via my mac and even took my mac out of wireless networks (just to be sure he wasn't trying to get to the IP 192.168.1.1 wireless.

  It happened a few times.  After it happened the first time I reset the access point and was able to get back to the web administration page.  I updated the firmware and exactly the same problem repeated once I plugged in my network home.

  This is a security feature? (Perhaps once it's on the wifi network you don't want just anybody access admin functions...?) A bug?  Or something else?

  Thank you

  If you don't set a static on the RE when IP address configure it on the connection of the SSID, it will grab an IP address from the router. You need to look in the router DHCP client table to find the RE of the new IP address. You can also use a reservation DHCP from the router to assign an IP address to the STIMULUS, but static IP is the best.

• From high-speed wireless broadband with a cable modem, and shows the connection, but cannot access the web w / IE8

  I have Windows Vista, IE 8 and labtop HP Pavilion. I had just recently Cricket Wireless Broadband, with a USB wireless modem. I now have the Charter/Comcast broadband through my cable. The modem is connected to my PC via the Ethernet port. On the connection icon on the toolbar on the right down, it shows that I am connected. The "Local Area Connection Status" in the network and sharing Center seems to be connected, since bytes are sent and received.

  However, when I'm on IE8, it acts as if there is no connection. Not being able to view the web page. Also, now when I go to a local WiFi hotspot, I can't connect to a network, just as I always, and it shows that there is a link, however, it won't let me access the internet. It used to work, before everything first, I connected the cable modem.

  Any ideas? Thank you!!

  JFerguson15,

  If the Cricket connection works correctly but your cable connection is not, which suggests the computer is set up correctly and the problem is with the cable connection. All other systems are able to connect through the connection of the Charter? If this isn't the case, please contact Charter and see if they are able to determine the issue on their end or help you reconfigure the modem.

  Cody C
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Help, please! Cannot access the web after connected to the VPN

  Hello

  I'm a newbie on Cisco products.  I configured a Cisco ASA 5505 with VPN firewall.  However, I can't access the web after I connected to the remote IPSec VPN.  I also cannot connect to the bands using the intellectual property.  But I can connect to the internal servers in the office with no problems.

  Here is my setup, can someone help please?  Thank you very much

  ASA Version 8.2 (5)

  !

  host name asa

  xxxxxxxxx.com domain name

  enable the encrypted password xxxxxxxxxxx

  xxxxxxxxxxx encrypted passwd

  names of

  !

  interface Ethernet0/0

  switchport access vlan 2

  !

  interface Ethernet0/1

  !

  interface Ethernet0/2

  !

  interface Ethernet0/3

  !

  interface Ethernet0/4

  !

  interface Ethernet0/5

  !

  interface Ethernet0/6

  !

  interface Ethernet0/7

  !

  interface Vlan1

  nameif inside

  security-level 100

  IP 192.168.1.1 255.255.255.0

  !

  interface Vlan2

  nameif outside

  security-level 0

  IP address dhcp setroute

  !

  passive FTP mode

  area of zone clock - 8 schedule

  clock summer-time recurring PDT 1 Sun Apr 02:00 last Sun Oct 02:00

  DNS lookup field inside

  DNS server-group DefaultDNS

  Server name 107.204.233.222

  name-server 192.168.1.3

  xxxxxxxxx.com domain name

  inside_nat0_outbound list of allowed ip extended access all 192.168.1.96 255.255.255.240

  pager lines 24

  Enable logging

  asdm of logging of information

  Within 1500 MTU

  Outside 1500 MTU

  IP local pool sc-192.168.1.100 - 192.168.1.110 mask 255.255.255.0

  ICMP unreachable rate-limit 1 burst-size 1

  don't allow no asdm history

  ARP timeout 14400

  Global 1 interface (outside)

  NAT (inside) 0-list of access inside_nat0_outbound

  NAT (inside) 1 192.168.1.0 255.255.255.0

  NAT (inside) 1 0.0.0.0 0.0.0.0

  Timeout xlate 03:00

  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00

  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00

  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute

  timeout tcp-proxy-reassembly 0:01:00

  Floating conn timeout 0:00:00

  dynamic-access-policy-registration DfltAccessPolicy

  the ssh LOCAL console AAA authentication

  Enable http server

  http 192.168.1.0 255.255.255.0 inside

  No snmp server location

  No snmp Server contact

  Server enable SNMP traps snmp authentication linkup, linkdown cold start

  Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac

  Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac

  Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac

  Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac

  Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac

  Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac

  Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac

  Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac

  Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac

  Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac

  life crypto ipsec security association seconds 28800

  Crypto ipsec kilobytes of life - safety 4608000 association

  crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set

  Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5

  outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP

  outside_map interface card crypto outside

  Crypto ca trustpoint _SmartCallHome_ServerCA

  Configure CRL

  crypto ISAKMP allow outside

  crypto ISAKMP policy 10

  preshared authentication

  3des encryption

  sha hash

  Group 2

  life 86400

  Telnet timeout 5

  SSH 192.168.1.0 255.255.255.0 inside

  SSH timeout 5

  Console timeout 0

  interface ID client DHCP-client to the outside

  dhcpd outside auto_config

  !

  dhcpd address 192.168.1.5 - 192.168.1.36 inside

  dhcpd dns 107.204.233.222 inside the 192.168.1.3 interface

  dhcpd allow inside

  !

  a basic threat threat detection

  Statistics-list of access threat detection

  no statistical threat detection tcp-interception

  WebVPN

  internal strategy group xxxxxxxx-sc

  attributes of xxxxxxxx-sc group policy

  value of 107.204.233.222 DNS server 192.168.1.3

  Protocol-tunnel-VPN IPSec

  XXXXXXXXXX.com value by default-field

  xxxxx xxxxxxxxxxx encrypted password username

  Strategy Group-VPN-xxxxxxxx-sc

  remote access to tunnel-group xxxxxxxx-sc type

  attributes global-tunnel-group xxxxxxxx-sc

  address sc-pool pool

  Group Policy - by default-xxxxxxxx-sc

  tunnel-group xxxxxxxx-sc ipsec-attributes

  pre-shared key *.

  !

  class-map inspection_default

  match default-inspection-traffic

  !

  !

  type of policy-card inspect dns preset_dns_map

  parameters

  maximum message length automatic of customer

  message-length maximum 512

  Policy-map global_policy

  class inspection_default

  inspect the preset_dns_map dns

  inspect the ftp

  inspect h323 h225

  inspect the h323 ras

  inspect the rsh

  inspect the rtsp

  inspect esmtp

  inspect sqlnet

  inspect the skinny

  inspect sunrpc

  inspect xdmcp

  inspect the sip

  inspect the netbios

  inspect the tftp

  Review the ip options

  !

  global service-policy global_policy

  context of prompt hostname

  call-home service

  anonymous reporting remote call

  call-home

  contact-email-addr [email protected] / * /

  Profile of CiscoTAC-1

  http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address

  email address of destination [email protected] / * /

  destination-mode http transport

  Subscribe to alert-group diagnosis

  Subscribe to alert-group environment

  Subscribe to alert-group monthly periodic inventory

  monthly periodicals to subscribe to alert-group configuration

  daily periodic subscribe to alert-group telemetry

  Cryptochecksum:5c1c99b09fb26fcc36a8bf7206af8e02

  : end

  Hello

  Try adding the following commands

  permit same-security-traffic intra-interface

  NAT (outside) 1 192.168.1.96 255.255.255.240

  Is there are always problems with VPN then I would maybe change VPN pool to anything other than something that comes into conflict with the LAN.

  In this case, these configurations should do the trick

  In order from top to bottom, they would do the following things

  • First remove the pool VPN and VPN configurations
  • Then remove the VPN pool
  • Remake of the VPN Pool with different network
  • Reattach the VPN pool for VPN configurations
  • Configure NAT0 to the new cluster of VPN
  • Remove the old line of the ACL of the configuration of NAT0

  attributes global-tunnel-group xxxxxxxx-sc

  no address-sc-swimming pool

  no ip local pool sc 192.168.1.100 - 192.168.1.110 mask 255.255.255.0

  IP local pool sc-192.168.2.10 - 192.168.2.254 mask 255.255.255.0

  attributes global-tunnel-group xxxxxxxx-sc

  address sc-pool pool

  inside_nat0_outbound to access ip 192.168.1.0 scope list allow 255.255.255.0 192.168.2.0 255.255.255.0

  no access list inside_nat0_outbound extended permits all ip 192.168.1.96 255.255.255.240

  Of course you also have the NAT configuration for VPN pools new Internet traffic

  NAT (outside) 1 192.168.2.0 255.255.255.0

  Please rate if the information has been useful if this resolved the issue as mark responded.

  -Jouni

• Cannot display the web page.

  I have a Dell latitude D600 with built-in wifi.  I am not able to connect to the internet with it more.  It shows that it is connected to the 100% signal.  I bought an external ralink wifi adapter and it worked for a while, as well as internal.  It shows that I am connected as well, but cannot set up all web pages.  They all say the same "cannot connect to the web page.  What could go wrong.  I tried restoring the system without result.  The ralink has worked well for a few weeks.  I took it to where I bought it and they said it was very good.  Can anyone help?

  Hello

  When it says connected but does not really provide Internet connection, this means that the wireless card works and can see the signal but cannot connect wireless router and get an IP address.

  If you can use a cable to connect the newspaper of router (read the manual of the router) to the menu of the router and check the wireless setting.

  Disable wireless security and see if you can connect without security.

  Once you activate the security.

  In general.

  My wireless is not working - http://www.ezlan.net/wireless.html

  Basic wireless configuration - http://www.ezlan.net/Wireless_Config.html

  Wireless Security - http://www.ezlan.net/Wireless_Security.html

  Jack, MVP-Networking. EZLAN.NET

• by clicking on download free firefox internet explore announcement that cannot display the Web page

  Firefox has stopped working on a single computer. When I click on the Firefox icon, it says "cannot find Mozilla runtime" has happened several times in the past and every time that I just did a free Firefox download it again and it fixed the problem, now when I try to make the free Firefox download internet explore says it cannot display this Web page. I tried to do a free download of Firefox on all three computers in my office and get the same message even on computers where Firefox works correctly.

  Download the installer of Firefox on another PC of https://www.mozilla.org/en-US/firefox/all/ and transfer it to the problematic PC via a USB key?

• I use to be able to enter a URL and press enter and Firefox would go to this site. Now I have to click on the arrow in the address bar to access the web page. How can I change cela return

  I can hit not only enter to access a web page. Now, I hit the arrow on the right side of the address bar.

  Pressing enter in the bar of address does not work

  Thank you

• Cannot access the login page - get ' APEX_AUTHENTICATION. GET_LOGIN_USERNAME_COOKIE' must be declared

  I googled this problem on Google/here until my eyes is red...

  • I have a local instance of 11 GR 2 Oracle running on Windows 7/Dell computer laptop
  • APEX 4.2.5.00.08 is installed
  • Oracle REST data services (formerly APEX Listener) is running in stand-alone mode
  • The database is up and accessible via SQL * MORE and TOAD
  • I can access the administration page of the APEX at http://localhost: 8080/ADR/f? p = 4550:10 and navigate between options with success
  • Yesterday, I was able to access the login pages of the Application Builder/End User without problem
  • Today-
    • When I try to access the Application Builder (http://localhost: 8080/ADR/f? p = 4500:1), after I put in my username/password work/name space, I get:

  

  
  

  • When I try to access the Login Page of the end-user (http://localhost: 8080/ADR/f? p = 110), I get:

  

  It seems that something was badly damaged in the file of the application, but I can't seem to find it. I put in the database market and Restful Services, I re - compile all the objects for APEX_040200, APEX_030200, APEX_PUBLIC_USER and APEX.

  And since I can't even at the request of the manufacturer, I am completely stuck. I don't have (consciously anyway) to install plug-ins, but something seems to have went wrong.

  Thought I'd make it here until I leave but a re-install.

  Thank you

  John

  Ended up having to blow the database, re-create the database and re-install APEX. In the end, it appears something was badly damaged, but I could not understand that.