I used "fixit" Microsoft down load and now none of the Microsoft products will NOT work.
original title: used fixit now produced microsoft give me an error message
FixIt
They open and send error messages to the server. How to rid my machine of fixit?
Hi KDMohn,
2. who is the Microsoft Fixit you used?
3. What are the Microsoft products you're talking about?
4. What are the error messages you get?
You can perform a restore of the system to a previous point, when the issue was not present.
| The System Restore tool uses points of restore to return the system files and settings to an earlier point in time. You can use it to restore the operating system to a point in time where you have not experienced the problem.
How to restore Windows XP to a previous state
http://support.Microsoft.com/kb/306084
http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore
Tags: Windows
Similar Questions
-
Hey
Just got rid of SE 2010 from my pc and now none of the network on my pc devices work continues to come up with the error code 39 and .dll is not found I tried re-installing the drivers and still no change please help also I can't uninstall it from the device or the other.
XP forums:
http://social.answers.Microsoft.com/forums/en-us/category/WindowsXP
Link above is for XP Forums.
There is a list of the different Forums XP to the link above to help you.
You get the help you need there.
Here is the Vista Forums.
See you soon
Mick Murphy - Microsoft partner
-
I've upgraded to Windows 7 and now my laptop mouse scroll button will not work.
I have upgraded from Windows Vista to Windows 7 on my Fujitsu Lifebook laptop.
The mouse that is built into my computer is a tablet with a typical right button and left button - and between these 2 buttons are 2 small buttons that can scroll and down the documents and Web sites. Well, since I have upgraded from Vista to 7, this button did not work. Not on Web pages, not on Word documents, not on anything!
Does anyone know how to fix this?
Thank you!
Saturday, September 4, 2010 12:53:55 + 0000, forthewin wrote:>>> I have upgraded from Windows Vista to Windows 7 on my Fujitsu Lifebook laptop.>>>> The mouse that is built into my computer is a tablet with a typical right button and left button - and between these 2 buttons are 2 small buttons that can scroll and down the documents and Web sites. Well, since I have upgraded from Vista to 7, this button did not work. Not on Web pages, not on Word documents, not on anything!>>>> Is - anyone know how to solve this?Check on the Fujitsu website to see if they have a Windows 7 driverfor your touchpad. If they download and install it. If they are not,you're out of luck.--Ken BlakeKen Blake, Microsoft MVP
-
Just as the topic says I can't activate my windows after I reformatted my dell to get all the * off of it that I don't need.
Skip entering your product key Windows 7 and complete the installation.
When you reach the desktop, click Start, right-click on computer
Click on properties
Scroll down to the Windows Activation
Click the link x days before activation.
Click on the link that says: "show me other ways to activate.
Enter the product key
Click next
Select the Activation of the phone
Click Next when you enter your key page
Select your country
Click Next, call the number listed
Be sure to explain your situation to the Appeals Officer.
Provide the installation generated when ID requested by the call agent
They give a confirmation ID in return, enter it
Click next to complete the activation.
or
How to activate Windows 7 manually (activate by phone)
1) click Start and in the search for box type: slui.exe 4
(2) press the ENTER"" key.
(3) select your "country" in the list.
(4) choose the option "activate phone".
(5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
(6) explain your problem clearly to the support person.
http://support.Microsoft.com/kb/950929/en-us -
I used an effects after trial and now I bought, the need to install anything new?
I used an effects after trial and now I bought, the need to install anything new?
There is no need of a reinstall of the application. To activate the subscription, please sign out and sign back for the CC desktop application. For more information, see connect and disconnect activate Cloud Creative applications
Hope this will help you.
Kind regards
Hervé Khare
-
I installed windows 7 and now my canoscan lide 50 scanner does not work.
I installed windows 7 and now my canoscan lide 50 scanner does not work. Anyone know if it will be a windows 7 update driver to resolve this problem? If this is not the case, what scanner in the price of $80 will work on windows 7?
Here is the solution for the LiDE 50...
-
When I got the test I deleted some things out of my computer to make sure that I had enough space. I deleted something and now photoshop or any other applications do not work. How can I solve this problem? Since then, I have now bought creative cloud
Is there a message you get when you launch Photoshop? Please tell us which version OS are you using, try: https://helpx.adobe.com/photoshop/kb/photoshop-crash-with-faulty-module-photoshop-exe.html
-
I have the latest version of FF and the latest version of Roboform... everything has worked perfectly until an hour ago... now the Robofrom toolbar will not work... says not compatible... it is activated in Add ons... nothing has been put to day or changedf suddenly just no toolbar and it will not tie
RoboForm will probably have an update for Firefox 30 when Firefox 30 is actually out, if not sooner. No need to turn off the automatic updates now.
-
I updated Firefox on my Mac (10.6.8), and now the story is not known (that option is checked) and the back button will not work. Help?
One possible cause is a problem with the places.sqlite file that stores the bookmarks and history.
- http://KB.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
- https://support.Mozilla.org/KB/bookmarks+not+saved#w_fix-the-bookmarks-file
You can also try to repair the database of places with this extension:
-
None of my restore points will not work. He directed the restoration of the system and that it recharges, but says system has not been restored.
What is your system brand and model?
What is your Version of XP and the Service Pack?Describe your current antivirus and software anti malware situation: McAfee, Norton, Spybot, AVG, Avira!, Defender, ZoneAlarm, PC Tools, MSE, Comodo, etc..What is the issue that you are experiencing that you think that the system restore will be remedied (or you are just convenient)? System Restore is not a time machine, but of course, this should work if you think you need.Some tools Anti Virus 'protect' your system so that they will not allow a restore of the system work properly.For example, if you use Norton/Symantec products, you will see a message like this:Restoration incomplete. Your computer cannot be restored...It is also a popular Symantec problem (well, I'll be polite and call an "undocumented feature"...), they wrote an article about it:According to what you use for malware protection, you may need to disable the product temporarily, do the system restore and then turn the products light up again when the system restore is complete.Sometimes you need start your system in Mode safe and so that your protection programs are not running, and then do the system restore. Tips from Microsoft in some of their articles that if the system restore does not restore your computer, start in Safe Mode, and then run the system restore. It works for some configurations.System Restore is sometimes so afflicted or Restore Points are suspicious, the best solution is to reinstall your system restore. This will remove the old Restore Points, but sometimes it's the only way to fix a broken system restore. You don't have to reinstall XP, only the part of system restore.That can leave you with your problem of unspecified origin that you hope the system restore will fix (using a system restore is usually not equivalent to fixing the problem though).Give these ideas some consideration if they apply to you.Sometimes malicious will afflict your system restore to prevent you to find and remove malware. It would much rather you trick into thinking that you need to repair or reinstall your XP when it is not necessary.No matter what you use for protection against malware, I do so and then only begin to solve any problems:Download, install, update and do a full scan with these free malware detection programs can solve any problems:Malwarebytes (MMFA): http://malwarebytes.org/SUPERAntiSpyware: (SAS): http://www.superantispyware.com/It can be uninstalled later if you wish.The scans by operating clean, reboot, test and we can fix any other issues
-
Original title:. Nothing works.
All my .exe files have been removed. as well as system32\rundll32.exe... How can they be retrieved when no file opens and the system restore will not work. I can't install a fixit program or run anything at all.
Safe mode?
Looks like you have a virus/trojan/worm infection pretty good...
Actually, even if you get executables run again - you can be (read as "will be") better off the coast of a new facility. Wipe and install media with your product key and other serial numbers and installation for other products media you own and restore your last recognized reliable backup for your files.
-
Windows Vista restore
My phone fell, and I can not get Windows to start. The repair option will not work. I tried to use an upgrade disc, but the 'upgrade' function has been disabled. It says I have to do it from the office, to which I can not access. The repair disk feature did not work either. Is it possible to restore the system without losing my files?Have you had your laptop, checked by a technician?
If you use a 32 bit Vista copy then any upgrade must be run from the Vista desktop.
-
This device does not work properly because Windows cannot load the drivers required for this device. (Code 31)
Hello
Have you tried to update the drivers as suggested by Basith M?
Method 1:
You can run the fix provided in the link and check out them.
Hardware devices do not work or are not detected in Windows
http://support.Microsoft.com/GP/hardware_device_problems
Method 2:
You can also try the procedure described in the link to troubleshoot driver issues.
Tips for solving common driver problems
http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-driver-problems
See also the proposal contained in the link and check.
On a Windows Vista-based computer or on a Windows Server 2008-based computer, the Microsoft ISATAP map appears with a yellow exclamation mark next to it in Device Manager, and you also receive an error message
http://support.Microsoft.com/kb/932520/en-us -
System Restore will not work
Hi FriendFriend,
1. did you of recent changes on the computer?
2. do you have security software installed on the computer?
3. you receive an error message when running the system restore?
I suggest that you put the computer in a clean boot state, and then try to clean boot.
It is possible that some third-party programs installed on the computer is causing the problem.
To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
See the link below to learn more about how to clean boot.
How to configure Windows XP to start in a "clean boot" State
http://support.Microsoft.com/kb/310353
Reset the computer to start as usual
When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
(a) click Start, type msconfig in the search box and press ENTER.
(b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.
(c) under the general tab, click the Normal startup option, and then click OK.
(d) when you are prompted to restart the computer, click on restart.
If the previous step fails, then view the event logs to examine the system restore service errors.
(a) click Start, click run, type eventvwr.msc/s in the Open box, and then press ENTER.
(b) click on the category System .
(c) click the Source tab to sort by name, and then look for "sr" or "srservice." Double-click each of these services and then evaluate the event description for any indication of the cause of the problem.
Steps of troubleshooting for problems when you try to use the System Restore tool in Windows XP
http://support.Microsoft.com/kb/302796
Procedure to view and manage event logs in Event Viewer in Windows XP
-
He said that what ep is running on another computer or block by microsoft. How can I resovled this.thanks andrew
Hi ford30705,
1. What is the full error message that you receive?
2 are you able to access all other websites properly on the computer?
Windows Update will not work if the copy of Windows XP is not enabled on the computer.
Type the command at the command prompt to find out the status of activation on computers below.
oobe/msoobe /a
Maybe you are looking for
-
How can I remove the title of the Email and date/time printing even?
Hi people,First of all, thanks to everyone at Mozilla Thunderbird and Firefox!I want to do is eliminate the subject of the E-mail (top left corner) and the date and time (lower right corner) when you print an email.Thanks in advance... Mark
-
I have three accounts on a single computer. It is perhaps part of the problem. My username in Firefox is the same on all three and I don't want to lose my data because some of it seems (since Firefox 5) be synchronization. When I signed up firstly th
-
failure to activate windows Genuine xp home
I have windows xp home key but I lost my disc. I used another drive on xp home to install and put my key while activating. I selected activate via the internet and had option your windows message has been activated. Now when I restart my PC it asks o
-
I can't update Itunes to 10.6.3
Hi, I tried to update Itunes after you receive a message that a "new version of ITunes is available" but keep getting the following error message: "An error occurred during the installation of the updates. If the problem persists, choose Tools > dow
-
I need Adobe Encoder. They say that if you are installing the first pro cs6 it is included as if by magic. But Adobe does not, they keep redirect me to the creative cloud versions. I'm pulling my hair out. Help, please.[Edited by Mod title.]