I've improved 3.6.13 to 10.0 and lost my login information from web site for most (all?) of my favorite sites.

Similar Questions

• Just improved numbers in the version of las and lost all my data... Is - is this posible? Can I get it back?

  Been using the numbers for several years, and has never had a problem... Updated several times and still worked ok.

  Earlier I did upgrade to the latest version and it erased all my worksheets...

  can I recover this data?

  Help, please

  If you work on documents in iCloud, they are probably still there. On a Mac, open a session with your Apple here ID: https://www.icloud.com and click the numbers.

  If you work on documents locally stored numbers, then they would need to be restored from an iTunes backup created before the upgrade.

• I need to improve the performance of a Web site and I want to track the total number of requests per second...

  I need to improve the performance of a Web site and I want to track the total number of requests per second... we are currently hitting...

  Please I need to hit the current with 1200 queries/second application, please help in this regard.

  Hi Nivask,

  If you created the Web site, the question would be better suited in the MSDN Forums. I would recommend posting your query in the MSDN Forums for assistance:

  Internet Explorer Web development

• I have lightroom 2 and had improved to 3 but my computer crashed and I try to install lightroom 2 since I have a drive and I get an error message

  I have lightroom 2 and had improved to 3 but my computer crashed and I try to install lightroom 2 since I have a drive and I get an error message

  What is the error message?  You can install version 3 without having to install version 2.  You'll just need the serial number of the version 2, when you go to turn on version 3.

  Lightroom - all versions

  Windows

  http://www.Adobe.com/support/downloads/product.jsp?product=113&platform=Windows

  Mac

  http://www.Adobe.com/support/downloads/product.jsp?product=113&platform=Macintosh

• How can I improve my Web site SEO (Search Engine Optimization)?

  Hello

  I pushed my live Webcam site and I am currently watching my site customer base of "Woorank.  There are a lot of areas that I can inprove for SEO, and they seem quite simple to take care of. However they give a lot of suggestions need to intervene directly in the HTML... well, I chose Muse, so I didn't have to deal with the jazz.  So, here's a list of the items I'm looking to improve my site and I'm looking for 'how' in Adobe Muse. I find and playback through Adobe "Strategies of SEO" at http://www.adobekb.com/strategies_for_seo.html#addingtitles but I still have unanswered questions.

  robots.txt

  I know Muse creates an 'XML sitemap', which I don't understand... because I know only plan the site links that are place on the footer of a Web site and use a directory - but it would be nice to prevent robots to access specific directories and pages and specify the location of the sitemap file. What Muse exactly do with my site "site map"? This plan of the site accessible to the people looking at my website or just robots?

  Topics

  My site does not currently use the html headers (< H1 > to < H6 >) I would use keywords in headings.  In the "Page properties" dialog, under metadata, there a box of '< head > HTML. How to enter words in this? Use the HTML code such as: green roofs < H1 > < / H1 > < Landscape Architecture H2 > < / H2 >? separated by a comma? Simply type the words with a space between the two?

  Alternative text for images

  I found that only some of the images from my site have the option to add alternative text. I right click on a picture and I get an "Edit Image Properties... ' Option to add alt text.  But some of the images do not have this option. Why?  I hover over an image and keep the pointer arrow (mouse) again and it will display a 'ToolTip' as 'Hero', 'picture frame', 'thumbnail', 'target' or 'relax '. It seems that only on the 'picture frame', 'hero image', and 'trigger' will be a right-click and display the option 'change Image Properties... '. ».  Is happening here?

  Blog

  I have an active blog that I like a menu item, and when you go to this page on my site, I just link that goes on the hosted blog.  Is there a way to eliminate a click actually having the user directed to the external blog site when you click on the tab of the menu 'Blog '?  I understand that a particular level of Catalyst Business has a Blog engine option.

  Many of them are fairly nit-picky, but I'd be grateful any given idea. Thank you

  More info about sitemap.xml:

  http://www.adobekb.com/strategies_for_seo.html#understandingsitemap

  Note that you can also exclude a page from your sitemap.xml to prevent crawlers from crawling it. Generally, you don't want to do it, but if you have a good reason for that setting is in the page properties dialog.

  

  You can assign title tags using paragraph styles. More info here:

  http://www.adobekb.com/strategies_for_seo.html#usingparagraph

  I am able to set the alt on the thumbnail text. Are you sure have the chosen thumbnail?

  You can create a page of the space reserved for your plan view, then mark the options on the menu page like 'include the page without hyperlink '. Then your menu will contain an entry for this page, but no hyperlink. If you select the menu item, you can assign a hyperlink with the hyperlink control in the Control Strip.

  

• Tips for improving my Web site

  Hello

  I did the year last by the redesign of my website (Hosting of Rovinj).
  I would like advice and guidance to improve the quality of this Web site.

  Thank you!

  I agree with others:

  • white background for the content
  • This would mean black text and headings not more yellow (I vote for the Blues)
  • smaller left column

  and for the police, I think you're fine, its readable and a decent size.

  It will be useful.

• It you asked an upgrade to access Web sites; I have improved; now, what should I do?

  I upgraded my Mac to Snow Leopard 10.6.3 operating system; What do I need to reinstall Firefox to be able to use the browser? I think I have Firefox Version 16.0.2

  Hi Doris,.

  You seem to be running Firefox 16. If everything seems to be fine.

  I don't know if I understand your question completely well. You can specify what your problem is?

  Thank you
  Ibai

• from the beginning in order to improve safety, I would answer "never" when asked if I wanted to save password in Firefox. Is it possible to reverse this setting for a web site?

  How do I "reverse" one 'never save' password to a Web site?

  You must delete the record except for password for this Web site. Follow the instructions here: https://support.mozilla.com/en-US/kb/Username%20and%20password%20not%20remembered#w_password-manager-settings

• FF returns "Unable to connect" for all Web sites. IE and Chrome work fine. I uninstalled and reinstalled with no improvement.

  I restarted the computer, pedaled power the router and do this submital via Internet Explorer.

  Take a look at Firefox cannot load websites but other browsers may in the knowledge base. That should tell you how to solve this problem.

• Mini Mac 10.5.8 has been improved to 10.7, we have a lot of products older Apple if I buy the most recent delivered to nine Mini can I still use my iBook etc.

  My Mini Mac 10.5.8 has been upgraded to 10.7. We have a lot of Apple products. If I always buy a refurbished Mac Mini can I have limited access to my other computers laptops, iPhone, etc. I'll gather all the detailed information of the products Apple and posting here.

  Everything should be good. Just use the same identifier Apple you used on older devices.

  Note the following points:

  Upgrading to 10.7 and don't forget Rosetta!

  You can synchronize only with a computer. To move computers

  Synchronization to a 'New' computer or replacing a hard drive "crashed": Apple Support communities

  If all the media synchronized music and apps are already in the iTunes library of the new just backup on iTunes computer and restore from this backup.

  iOS: backup and restore your device iOS with iCloud or iTunes

• How can I improve the rate of acquisition with daqmx and usb-6008?

  Hello

  I am trying to acquire data of analog voltage with a USB-6008. I'm under Labview 8.5 student on an HP laptop with a 1.33 Ghz cpu and 736MB RAM, apparently. I tried using the Daq assistant and the low-level Daqmx functions. My best results come with a task set in MAX for my analog input, and using the function 'Daqmx read' the 'unique double 1 d sample' value in a while loop. I insert the values returned in a table which built in the while loop, and then when I'm done, I check the number of samples in the table. In the test VI attached, I also use the time to Get before and after all loop. The best sampling rate I made using this method, is around 40samples/second. I have attached a VI below that illustrates this concept. In my actual application, the data acquisition code runs at a time while loop with 1ms, parallel to other code that controls the device I'm collecting data of. The sampling rate is roughly the same for my test below VI and my application program.

  The 6008 datasheet gives the sampling frequency maximum 10 kHz. I'd be happy with 2 to 2.5 kHz, or as soon as possible; I'm sure that I can achieve a little more than 40 Hz. My first idea was tied to the hardware, but the 6008 cannot make acquisitions NI hardware.

  My question is: How can I implement a faster sampling of analog voltages to a USB-6008 in LAbview? If I can't do it, is there another way I can taste the data more quickly?

  Thank you

  -SK-

  

  To the best of my knowledge, the USB-6008 can do timed equipment acquisition. Don't forget that this is a multiplexed device, so if you add 8 channels so the maximum you can set is 10 k/8

  If you are new to LabVIEW, I suggest that you try this sample program first

  \examples\DAQmx\Analog In\Measure voltage. llb\Acq & Graph tension-Int Clk.vi

  Amit

• Improved LabVIEW 5.1 to 7.1 and got errors

  Hello

  I upgraded from LabView 5.1 to 7.1.

  With labview 7.1, I opened a VI that is written in labview 5.1, I got an error saying something like

  The labView won't pass the value and I use InRange and Coarce... (it was repeated several times) I've closed, but after I run the VI, the labview does not communicate with the freezing. where he worked very well with LabView 5.1.

  one has an idea of what's going on! How can I get this error massage once again to see what it was! and how can I resolve this issure!

  Thank you

  It wasn't an error message. It was a warning that said you that the original VI was the controls on the front panel configured to use a range under duress. What it means to you, it's that with 7.1 the mechanism only works when you use the Control Panel before you enter the value manually. If you use the VI as a Subvi and feed it a value that is out of reach, then the parameters of coercion will not apply and the Subvi get the range without coercion. So, if you brought together making sure that the slot - VI would have never received one out of bound value then you must add a stove and Coerce function in the Subvi to ensure that if the Subvi is powered a value programmatically, and then he will be forced to be in the range.

  I have doubgt that causes the problem to not communicate with your device unless the value created a kind of parameter associated with certain communication parameters.

• To improve the streets & trips 2008 to 2010 and use GPS Locator

  Original title: I streets and trips 2008 + GPS Locator. Can I upgrade to 2010 and continue to use the GPS Locator even connected to the USB port?
  I streets and trips 2008 + GPS Locator. Can I upgrade to 2010 and continue to use the GPS Locator even connected to the USB port?

  It is the instance of Vista installation.

  http://www.Microsoft.com/communities/newsgroups/en-us/default.aspx?DG=Microsoft.public.streets-trips

  Discussions in Streets and Trips

  Try the discussion above for your question.

  See you soon.

  Mick Murphy - Microsoft partner

• WAE WAAS-7341 improved 5.3.3 to 5.3.5 and lost half of corporate communications

  Remote sites running running, 274 s or 674 s.  All 674 s run WCCP, all 274 s inline, main office running "inline" 7341, CM is on a 274 in the main office, it's always about 5.3.5.

  So passage of 5.3.3 to 5.3.5 broke 60% of all corporate communications.  I have since downgraded to 5.3.3 however back, to 5.3.5 all SSL traffic has failed, Exchange e-mail failed, SAP Logon failed and a portion of the CIFS traffic failed.

  I turned off WCCP, in a site remote, everything has worked, on return, everything has failed.  Interfaces of the inline in the main office Shutdown worked.  Downgraded the main office of 5.3.5 to 5.3.3 and all worked, same places running 5.3.5 had no communication problems when the seat was demoted in 5.3.3.

  I like downgraded most of my places to 5.3.3 still 4 5.3.5 running.  Don't know if anyone else had problems in upgrading to 5.3.5 and just wanted to put out there.  I've been on a version more version 4.1.x - 5.3.x and have never had such a complete and total failure, as I had to 5.3.5.  There have been incidents during updates where I lost SSL or had problems with e-mail and there was always a quick work around to solve.  This time, I didn't know how to look for a solution to "the sky is falling!"  And decommissioning took less time than the composition of this post.

  Everyone has upgraded to 5.3.5?  Have you had problems after the upgrade?

  Hello

  Please see the next section of the 5.3.5 release notes.

  I guess your 7341 principal is "inline". There is a known issue with inline card:

  http://www.Cisco.com/c/en/us/TD/docs/app_ntwk_services/WAAS/WAAS/v535/WS...

  5.3.5a version just came out with the fix.

  If you are deploying the WAVE-274/474/574 or WAE-674/7371/7341 devices with a card online as a device of edge or core wide area acceleration engine (WAE), Cisco does not recommend that you upgrade to Wide Area Application Services software Cisco, Version 5.3.5. This can cause data corruption when data are sent to the client. For more information, see CSCun85976 . This does not affect your deployment if you use the WAVE-274/474/574 or WAE-674/7371/7341 devices Cisco WAAS AppNav or with the Communication for the Web (WCCP) Cache Protocol or if you use devices WAVE-294/594/694/7541/7571/8541.

  Hope that helps,

  Patrick Mubarak

  #42150 CCIE (security)

• Just improved 5.0 to 6.0u2 vcenter.  How do eliminate you the web client certificate error?

  We were a vSphere 5.0 shop for many years and enjoyed the client c# 4.0, 4.1 and 5.0 then days.  We just upgraded 6.0 Update 2 this week and although always, we are primarally used to the c# client and will use it for a while to come, I am getting used to the web client for the new features that are available only in it, such as SRM and VR.

  I was able to click through the numours of screens of reminder to get via Firefox after all these certificate warnings and even easier just click the one or two things in Chrome or IE to get in.  But how could eliminate total certificate errors?  Example, now I'm with Chrome, but the https:// in the address bar is red with a slash through it.

  In most all other device based on web or connection we have, as HP iLO, Dell iDrac etc... usually, we create a CSR on this device and it present our internal Windows certificate authority and recover a file to go back to the device.  Is it possible to do this with the web client?  We have a certificate of 'Server Web 2' model that generates the sha256 return certificate and inherently all field devices to trust him because the area is important our root certificate authority.

  Also, we are running services such as replication vSphere and SRM, I would not change certificate affects only or same vSphere Update Manager.  We have two sites HQ and DR.

  I ended up getting rid of the cert errors by following this page: 6 replacement vSphere SSL certificate / implementation by using the Certificate Manager-automation tool

  I followed the procedures for "Certificate of Machine (Reverse HTTP Proxy) replace with certificate custom" and just that.  I didin 't' t mess with root VMCA with custom signature certificate certificate because its seems to me like he wanted to do an endless number of the signature of the certificate request and keys.  But the first option considered for our internal Windows CA took care of her.

  For replication of vSphere 6.1.1 that I had to turn off the virtual devices from replication via customer web vSphere vSphere and then put them back on.  Then connect to their URL of web management (port 5490) and make the reconnection to the vsphere on the connection tab, where he was invited to accept the new certificate.

  For AUVS I had to run the VMwareUpdateManagerUtility.exe under C:\Program Files (x 86) \VMware\Infrastructure\Update Manager and to the third option of re - register to vCenter, and then restart the service.

  Surprisingly, SRM sites remained paired although I've read that some people have trouble with it.  I'm on 6.0 update 2 and I think one of the questions was fixed in 6.0 Update 1 b.