I want other images to fade. Use the ToolTip?

Similar Questions

• I installed a trial of Illustrator from Adobe on my macbook pro. I want to draw a picture using the custom trace button but can not. Does anyone have any ideas how I could track custom?

  I installed a trial of Illustrator from Adobe on my macbook pro. This is the release of 2014 of the adobe Illustrator. I want to draw a picture using the custom trace button.

  I start a new document. Then I place my scanned pencil/color pencil, drawing, in the document. I tried to scan and then placing it as jpeg, bitmap and a tiff file. I tried scanning and place then, in color and in black and white. The scan mode that I use is flat. Adobe Illustrator allows me to select the default button and one of the eleven preset buttons (e.g. photo high fidelity), but cannot me click on the record button custom. The custom trace button is gray while all other buttons are white.

  Does anyone have any ideas how I could track custom?

  Just it trace, and then change the options later. The follow-up is 'live', you can press the buttons and see what happens.

  See also the manual.

• I can't see the pictures in my yahoo email, I did not have this problem with other browsers. I used the safe mode and still no success. Help, please.

  Question
  I can't see the pictures in my yahoo email, I did not have this problem with other browsers. I used the mode 5 firefox safe and always without success. Help, please

  To help other users find solutions, please come back to this Thread and connect you to the
  Forum with your user name and password:

  Click on 'resolved' beside the answer above that BETTER resolved your issue

  DO NOT CLICK on 'Solved It' next to this answer

• you want to be able to use the wifi to connect with my kindle ebook.

  If someone could help, I am wanting to turn the wifi on my pc (dell inspiron 6400). I want to be able to use the wifi to connect with my kindle ebook. the problem I have is, I bought an audio book through the kindle Bookstore using my kindle ereader. a message came up saying that I must be in a wifi, download area. I suppose that if I activate my wifi, I can be able to complete the download. ?

  Hi Dave88,

  I suggest looking at the support page to see if they have an article or a tutorial on how to do this with your Kindle, Amazon's Kindle:
  http://www.Amazon.com/GP/help/customer/display.html?nodeID=200127470

• I subscribe to creative cloud for more than a year. I heard that after this year, I still want to be able to use the software. However, I would not be able to update until I subscribed again? What is its operation or? Thank you very much

  I subscribe to creative cloud for more than a year. I heard that after this year, I still want to be able to use the software. However, I would not be able to update until I subscribed again? What is its operation or? Thanks a lot now have a load of files I can not settle before I send them to the clients until I have shut down my business. Can anyone throw any light on the matter please?

  If you do not renew your subscription, you will have 30 days to use the programs as tests... and then they stop working

  A subscription is like rent a car... stop paying, and you stop driving

• How do I place what the images are RGB using the separations preview?

  2 questions: 1. how to spot what the images are RGB using the separations preview? 2. is there an easy way to convert those to CMYK without opening each to the PS? I've done it before all the time but I'm rusty and don't remember how I did it. I'm on CS6.

  One of the many methods to discover, you can:

  (1) you can use the links Panel.  Open the links Panel. Go to the menu of the Control Panel, and then choose Panel Options. In the dialog box Options Panel, under Show column check 'color space '. Now, when you view your links Panel it will show the color space of all related images.

  (2) you can use the preflight and set a preflight profile. In the profile, go to the section color > color spaces and unauthorized Modes and check RGB. Then all RGB images have reported.

  (3) If you need to know before you place the images, use Adobe Bridge. Open the folder where the image. Use the metadata Panel and view the color space of images.

• Some images are centered, but others do not, even using the same tag div

  I have a background image that does evolve upward and down to match the size of the browser, but I can't keep centered content. I have an image of the logo, below which is a container of text and below that is another image. The text container remains focused, but not the images - they move to the left, but with different proportions.

  www.ShredSkins.com

  Fair warning: the code corresponding to the index page and style sheet is really mixed up. I tried a lot of different things with different names (so I can easily go back to a previous combination) and when I get home from work index I can remove everything and do it cleanly.

  Thank you!

  Add this to your CSS code.

  IMG {max-width: 100 %}}

  Then, remove all the attributes height and width HTML of your tags.

  This will result in images that resize available.

  Nancy O.

• How can I change the JPEG images and photos using the program "Paint"?

  I'm taking a good picture of me with my laptop built-in digital camera, so I can use it as my avatar on my blog page.  I tried to change it and other images using the 'Paint' program, but I am not so much with things, as brighten up my eyes and my teeth by a shade or two.   Is there someone who could give me any suggestions on the best way to do it?  When I do, I do the picture of me end up looking like Little Orphan Annie.  Of course, I appreciate all the tips and help and thanks to all who respond!

  If you need a program with more options... the
  Freeware PhotoScape can be worth a try:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  PhotoScape
  http://www.PhotoScape.org/PS/main/download.php
  (NT/2000/XP/Vista/7)
  (the download is: PhotoScape_V3.6.1.exe)

  PhotoScape? (tutorials)
  http://www.PhotoScape.org/PS/main/help.php

  For example...

  How to whiten teeth with PhotoScape:

  Open PhotoScape and select... Editor in Chief.

  Click on the Viewer and find the picture you want to
  Ed. Left click of the photo to highlight and click on the left...
  Editor tab.

  Left click the + button to zoom in and get a good
  view of the teeth of the subject.

  Reach... Tools tab / effect brush / brighten up...

  Choose a size of brush near the size of the teeth.

  Left click / drag the toothbrush to reach...
  the brightness desired... you may need several passes
  If the result is not acceptable to the left click Cancel all
  button and try again.

  Also... you can place the brush on a tooth and the left click
  one or more times to brighten this single tooth.

  It is best to save as and give your modified version, a new name...

  See you soon

• Imaging multi channels using the acquisition card OR

  We have a 1408 IMAQ being controlled by LabVIEW 8.0.

  We want to install multi-channel of imagery. All the channels work individually. However, when I was trying to show two channels simultaneously, single channel works and I got the following error message:

  Error 1074397150 has occurred to IMAQ enter Setup.vi

  Possible reasons:

  NOR-IMAQ: A timeout error occurred while you wait for the specified event. If you expect a picture, make sure all the video data is acquired during the period. If you wait for a signal, check that the assertion of signal occurs within the period.

  Sometimes I get a different error message asking me to assign different buffers to both channels. I understand that IMAQ 1408 has only analog digital (ADC) converter to digitize the incoming video. It may acquire up to four different cameras, but only of a camera at a time.

  I don't mind do frame rate in half. I think to show only one channel at a time and do the two channels alternantly. But I need to know how config routes to get there.

  I've attached an example that should work.  I could not test it because I don't have the equipment, so it might need some settings.  I would test it with one channel by setting the channel # 1.  Once it works, define channels # 2.  I set the display to use snapshot mode so the same image can be used for all screens.

  The only reason that I can think of that would make multi-channel acquisition fail when single channel works is the lack of synchronization between signals.  The start of frame signal must be the same for all channels.

  Bruce

• HP CM1415fnw under Windows 7. I want to scan to PC using the pad touch printer

  I installed the wireless printer, and it communicates perfectly. It will scan USB very well, but I can't find a function to scan the PC unless I work from the PC using the HP software or other TWAIN software. I set up the printer for a friend who is legally blind and not competent computer.  He needs as USER FRIENDLY as it can get! He would like to insert pages in the feeder 'Print to PC' press and do the scan appear on his screen. Is this possible using wireless? If this is not the case, using a wired connection would allow the functionality I'm looking for?

  Hello

  I checked the manual of the product, and it describes 3 General methods of scanning.

  Scan methods
  Conduct of analysis in the following way.
  ● ● ●
  Scanning to a USB key from the control panel of the product.

  Scan from the computer using the HP scanning software

  Scan compatible TWAIN or image Windows (WIA) - software compatible Application

  Does not matter if you use USB or network connection... None of them are 'push' the image of scan to PC:{{class=fontblue}}

  Perhaps we could reflect on a possible way: maybe scan from the front panel for a flash drive, then set up the PC to read and view from the USB to the insertion?

• How to draw and the positioning of images in FieldManager using the method object?

  How can I add and the positioning of my images in the position desired in FieldManagers?

  I need to add more than 2 fields (HorizontalFieldManager/VerticleFieldManager) in my application and I draw an image using the method of painting ovverided.

  NOTE: The image will be established if I do not use mainScreen.add (SeparatorField ()) or mainScreen.add (hori2), see below.

  If I use mainScreen.add (mainScreen.add (hori2) SeparatorField ())... n then the horizontalFieldManger won't be empty, drawn in the output screen.

  import net.rim.device.api.ui.*;
  import net.rim.device.api.ui.component.*;
  import net.rim.device.api.ui.container.*;
  import net.rim.device.api.system.*;
  
  public class BackgroundImage extends UiApplication
  {
      private Bitmap backgroundBitmap;
      private Bitmap fieldBitmap;
  
      int width, height;
  
      public static void main(String[] args)
      {
              BackgroundImage theApp = new BackgroundImage();
              theApp.enterEventDispatcher();
      }
  
      HorizontalFieldManager hori2;
  
      public BackgroundImage()
      {
          //The background image.
          backgroundBitmap = Bitmap.getBitmapResource("jalan_logo.png");
  
          MainScreen mainScreen = new MainScreen();
  
          hori2 = new HorizontalFieldManager();
  
          HorizontalFieldManager horizontalFieldManager = new HorizontalFieldManager(HorizontalFieldManager.USE_ALL_WIDTH | HorizontalFieldManager.USE_ALL_HEIGHT){
  
              //Override the paint method to draw the background image.
              public void paint(Graphics graphics)
              {
                  System.out.println("come to here..!!");
                  width = graphics.getScreenWidth();
                  height = graphics.getScreenHeight();
                  //Draw the background image and then call paint.
                  graphics.drawBitmap(width/2, height/2, 150, 40, backgroundBitmap, 0, 0);
                  super.paint(graphics);
              }            
  
          };
  
          //The LabelField will show up through the transparent image.
          LabelField labelField = new LabelField("This is a label");
  
          //Add the manager to the screen.
          mainScreen.add(horizontalFieldManager);
  
         mainScreen.add(new SeparatorField());
         mainScreen.add(hori2);
         hori2.add(labelField);
  
          //Push the screen.
          pushScreen(mainScreen);
      }
  }
  

  Help, please.

  I have already pointed out the problem with USE_ALL_HEIGHT in first Manager add you to the form. Drop this style bit, otherwise sublayout your screen will generate an exception, and nothing appears!

  If you want HorizontalFieldManager to be of a particular size, regardless of the height of managed fields, replace its sublayout:

  HorizontalFieldManager fieldManagerTopBanner = new
           HorizontalFieldManager()
  {
       protected void sublayout(int maxWidth, int maxHeight) {
          super.sublayout(maxWidth, maxHeight);
          int myDesiredHeight = ;
          setExtent(getWidth(), Math.min(myDesiredHeight, maxHeight));
       }
  
       protected void paint(Graphics g)
       {
            // g.setBackgroundColor(0x000000);//blue
               g.drawBitmap(100, 150, 100, 200, jlnLogoImg, 0, 0);
  
            //g.clear();
              super.paint(g);
       }
  };
  

• How can I keep my top bar with "delete" on it to go away when I click it. I want to remove successive emails using the button Delete on top of my Windows Live Mail

  I want to delete several emails in Windows Live Mail. When I click on the button Delete in the upper part, the entire bar disappears. I want to keep it there all the time to use it to remove some of the emails but it keeps going away after a single use.

  Right click on the home tab and click cut the Ribbon to deselect.

  You can also ensure that the delete button is always visible by showing it on the Quick Access toolbar at the top of the window. There is a drop-down menu at the right end of the QUICK access with the controls bar, and others can be added by right-clicking on any command on the Ribbon and select Add to quick access toolbar.

• I want to know how to use the fingerprint, that I had to my notes

  I want to know how I put the finger impression that I would be in settings on my notes please

  Not quite sure I understand what you are wanting to do.

  There is no way to use the fingerprints Notes ID secure. There is no real way to even set a password for the default Notes app.

  If you use a 3rd party notes App that claims to support this feature, then you should tell us that one.

  There is no way to integrate the stands of fingerprint ID Notes like her.

  This is a feature which will come with the next update iOS: iOS 9.3.

  Thanks to anypats for the clarification.

• Keep all information collection during the acquisition of images when you use the basic IMAQ package

  I did show a command of X from IMAQ image control that has the ability to overlay dots and lines on an image, but when I put my control of X in my loop of acquiring image collections information disappears with each new picture that I acquire.

  How can I keep the overlay in place and just update the control with the new image and does not overwrite data overlay? I tried the function of superimposition of fusion, but this doesn't seem to work.

  Thank you.

  Overlays are completely erased when you acquire a new image.  You can create collections on a separate image, and then copy to each new image overlays until you view it.  The other option is to re-create overlays for each new image.

  Bruce

• The video device is currently in use. Close any other program that is using the device and try again.

  After starting cold, without other programs started using Windows 7 Home Premiun for a place in the upgrade, I am unable to capture video DV camera DV over USB.  The same setup work properly on Vista Home Premium.  (MM6)

  By using the menu "Import device", the dialog box "Import pictures and videos" identifies the camera as "Digital vidéo caméras Video Edit".

  After the error message out of Movie Maker and reboot, then try again translated by "importing video has already begun."

  Microsoft Windows Media Encoder 9 Series do not seem to be available for Windows 7.