I want to install a printer network hp 1505n on pc win 7 64

I can only find the complete solution is - it compatible with win 7?

I used a universal driver and it works fine. Thanks for the help

Tags: HP Printers

Similar Questions

  • Toshiba e-Studio 206 - I want to install local printing to Cent OS 6.4

    I have Toshiba e Studio 206 and 207 and Cent OS 6.4.

    and I see in the building after command lsusb

    [root@m4-novnik ~] # lsusb
    Bus 001 Device 002: ID 8087:0024 Intel Corp. integrated rate matching hub
    Bus 002 Device 002: ID 8087:0024 Intel Corp. integrated rate matching hub
    Bus device 003 002: ID 08 6:8012
    Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
    Bus 001 Device 003: ID 0749:1000 never Electronics Corp.
    Bus 004 Device 002: ID 093a: 2510 optical mouse Pixart Imaging, Inc.

    CUPS, version 1.4.2

    connected USB 2.0. -Bus 003 Device 002: ID 08 6:8012
    I want to install local printing.

    Help, please.

    I'm quite skeptical and I do not think that someone on this forum will be able to help with this.
    In my opinion, you have more chances of getting help on Linux forums.

  • I want to install the App "MyChart" on comp. 8 Win & Win support indicates it is available for FF, IE, etc., but modules FF say it can not be found?

    Why FF? is not available when there is apparently

    Looks like you are using the Web site directly in the browser instead of using a separate application. I think that separate applications are for mobile devices. However, I didn't really dig in there in detail.

  • I want to install a MB2320 of Maxify, but am not able to see the printer from my iPhone, airprint

    I want to install this printer and managed to communicate with her since my main PC via USB, LAN and Wireless LAN.  I noticed however was able to get the feature Airprint works.

    I also have intalled the Pixima/Maxify app on my iPhone and it says it can not see the printer.

    I read on line materials, but must be missing an important detail.

    OK, here is the "rest of the story.

    There is a setting where the Administraitor password can be completely removed.

    I removed it, and all my devices can connect to the printer via my wireless access Point.

    I say that Canon hotline has been the best exeriance I had with an assistance service.  3 calls, zero waiting, when I called back to work, the automated service knew it was me and saved all my information.  Support staff were helpful and courteous.  A reason more than I bought another Canon printer.

  • LOST MY HP PHOTOSMART INSTALLATION SOFTWARE, HOW CAN I INSTALL THE PRINTER IN ANOTHER MAC?

    Hello

    I ALREADY HAVE A PRINTER OF HP PHOTOSMART MORE, BUT I LOST MY CD FOR INSTALLING SOFTWARE. I JUST ACCUIRED A DIFFERENT MAC AND I WANT TO INSTALL THE PRINTER ON THIS COMPUTER.

    WHAT CAN I DO TO INSTALL IT?

    Kind regards

    JAIME

    Hi Jaime,

    What you can do is to go on the media and the area of drivers from the Hp site by following the link http://www8.hp.com/us/en/support-drivers.html

    -Just type in the Version of the Photosmart you have and who follow a Version of MAC OS that you use

    -you want to do from the computer that you are wanting to install the printer on.

    Just download the driver and install and that should help you to get this printer set up on this computer as if it was the drive itself

  • HP2540 all-in-one: how to install a printer without the use of the Internet

    I want to install this printer on another computer and is not able to connect to the internet. How can I finish the instalation.

    NH

    Hello

    If you can download the driver on a computer that has internet access, you can transfer the file to the other computer using a USB key.

  • Impossible to install a printer over a network; requires a driver must be installed.

    Recently I got problem with my printer, so I removed and have reinstalled the software. The printer is now works great on the host computer network.

    I have a home network and I want to share a computer, I already checked the box on the properties of the printer for printer sharing. I wanted to add my printer to another computer through the network from my computer, but it would not allow me. I tried to change the permission settings, but it doesn't are not all the parameters or tabs in printer properties that allow me to change anything either, so I went straight to the other computer and he DID I would add a computer on the network, but after I selected the printer to add and clicked on OK another message appeared and he said that my computer does not have the correct driver. INF installed and he asked me to look it up.

    I'm stuck because since this is a computer on the network and not the host computer that can have the file, I don't know how to access my computer through another computer on the network, and I do not know which file is in application or how to find it.

    * Thanks in advance for reading and using, any idea, advice and assistance are greatly appreciated! :)

    Host Info:

    Windows XP Media Center Edition 2005 SP2

    Computer info network (one that I am trying to install the printer on):

    Windows XP Home Edition SP2

    News of the printer:

    HP Photosmart C4180 all-in-one

    I go to the HP website and just download the right driver from there.  It will probably be the simplest solution.

    -B-
    http://www.officeforlawyers.com | http://www.OneNote-tips.com
    Author: Guide to counsel for Microsoft Outlook

  • I want to connect to a network printer hp cp1518ni with different versions of windows (win7 & winxp)

    I want to connect to a network printer hp cp1518ni with different versions of windows (win7 & winxp). My pc with win 7 work ok, but the pc with win xp not 'see' the printer on the network. What is the additional driver should I install?

    Thank you

    Hi @OHIMATAS,

    I see by your post that you are unable to network that is connected the printer to the Windows XP computer, but Windows 7 computer. I can help you with this.

    Make sure that the Windows XP computer is connected to the correct network name, not a guest or the other network.

    Print a configuration page to get the IP address of the printer.

    Print a Configuration Page.

    Try and access the printer on the Windows XP Embedded Web server.

    Type the IP address in the address bar of your web browser. (Internet Explorer)

    It loads the page Web has?

    If you are unable to access SAP of the printer, check the IP address on the computer to see if the first 3 sets of numbers match the printer IP. They must match to be on the same network.

    Go to start, type executer run in the start search box, type cmd, and then type ipconfig.
    Check the IPV4 address.
    Now, check the IPV4 address for the printer.
    Do the first 3 sets of numbers match?

    Try and ping the printer.

    In the same window, type ping printers (space between ping and IP address) IP address
    What are the results?

    Run the Wizard add printer in printers and faxes, if you were able to access EWS of the printer.

    Please provide detailed results if you're still having problems.

    Good day!
    Thank you.

  • Photoshop wants to install printer drivers

    Hello this question was me angry for a few days now and I can't seem to find help on this topic anywhere.

    The company that I work is an international design firm to send us files .psd behind all of our offices.

    Recently, I met a problem that seems to be in connection with saving a .psd file.

    When one of our other offices save the .psd file she apparently saves the information of the printer with it.

    Now, when our office here in the United States wants to print this file, it prompts you to install the printer located in our other offices.

    Is there a way to prevent this from happening? If we choose not to install the printer driver, it takes what seems an eternity for the print dialog box appears.

    If we do not install the printer driver and then when the computer starts it tries to connect to our other offices around the world, which takes forever.

    Any help would be greatly appreciated

    Yes, the print settings are saved with the document, and they are pointing to a worldwide network printer.

    You might ask the people who send you the documents if they could print on a local printer rather on a network printer before you save the document (they don't even to print, simply click on "Done" in the print dialog after selecting a printer that is not shared), and then the printing code will fail quickly because he will not have to search on the network printer , and you will get the default settings for the default printer.

    I make a note to myself to try to find a way to make it easier to nuke the print settings when opening dialog print in the future, but for today, your two choices are to install the printer driver and wait for the connection around the world, or not install the driver and put up with Windows asking if you want to install the driver.

    I'm sorry.

  • HP software detects the printer, but then "the printer could not be installed on the network.

    I tried looking for a similar problem, but have had no success yet.  I doubt I'm the first to this problem!

    The computer is XP SP3, is printer Deskjet 3050 has, and it's a WiFi WPA - PSK.

    The printer confirms that it is connected to WiFi.

    When I run the tool on the computer, to the point of network configuration check, the installation software detects the printer with the correct IP address.  It's the only thing he discovered.

    I click Next, and after a minute or two, I get the error "the printer could not be installed on the wireless network" click Retry to try reinstall the printer on the network, or click Cancel to return to connection options.

    This just cycles with no progress.  I have disabled the Windows Firewall and also disabled the AV.  No change.

    I can access the interface web printer - but still cannot install the printer.  It is listed in the printers and faxes as being offline.

    I'll try removing it again and add new-but-that someone has encountered this problem before, please?

    Well, my problem is almost solved. I uninstalled the software and then downloaded the software of the printer on the HP site where it is more recent than what was on the CD... and it's fixed!

    I can print wireless!

    Cannot scan, the printer gives an error, but that's OK for now.

  • Want 5530: Install 5530 want twice on same PC with different printer profiles

    Running Windows 7 Pro.  I want to install my 5530 printer like the first time with the name of the printer that includes 1 side printed and it default profile 1 side printed.   I would then like to install this same printer a second time, but with a name that indicates 2-sided with his descriptive default on 2 sides.  The first install the Panel very well.  However, the software will let me install a second time.  It stops in the process where I tell it to connect via USB.

    I can install it using the Win7 "Add a printer", but nothing will be printed on it.  It seems to use a port USB, for example USB006, where the printer software creates a "printer virtual port xxxx".

    1. How can I install the 5530 desire a second time on the same PC with this own printer profile?

    2. in the "Devices and printers" Win7, it sort of just "copy" the first instance/profile of the printer to a second instance if I can just change the profile?

    Hello

    Devices and printers, click Add printer and select a local printer.

    Select the LPT1 port, and then click Next.

    Select HP or Hewlett-Packard in the manufacturer list, then the HP Envy 5530 in the printer list, and then complete the wizard.

    Once you have finished, right-click the existing copy of the 5530 (the one created by the HP software) and select printer properties.

    The tab of Ports to take note of the selected channel and close the window.

    Right-click the newly added copy and select printer properties, select the same port as configured for the original printer and press OK.

    You can set each printer as required and name it accordingly.

    Kind regards

    Shlomi

  • uninstall the wireless printer. Try to install using connection USB installed on a network.

    Try to install HP Officejet 6500 wireless by using the USB connection. Installed on a network.  How do I uninstall and let Windows identify as new material on a USB connection?

    Turn off the broadcast of your wireless router signal. Shut down the PC. Menu using the printer configuration to remove or change the SSID. Then turn the printer off and connect it to a USB port (this implies that all the necessary software has been installed). Now turn on the computer and turn on the printer. Once the printer has been detected the turn on your router.

    JS
    http://www.PAGESTART.com

    Never be afraid to ask. This forum has some of the best people in the world to help.

  • I installed the printer coupon several times but every time I want to print, nothing happens.

    original title: Coupon printer

    I installed the printer coupon several times but every time I want to print, nothing happens.  I followed all the instructions, but when the coupons are supposed to be sent to my printer that they do not print.  What can I do?

    Hello

    If you have problems with the software or hardware contact their manufacturer for appropriate assistance

  • Photosmart Prem C310 install problem, printer is located on the wireless network but don't see iMac

    Try to install this printer. It works via USB, but when I get to the step of configuring wireless and you're

    said to unplug the USB cable, it gives me the following, not accessible DEVICE... The network configuration has been correctly transferred to the device. However, to continue to configure the network device, your Mac must have access to the device. So please make sure that your Mac has access to the network: "mynetwork" and try again.

    The printer is on the network end def (I can ping ok), but the MAC can not see wireless and wont print. I've seen a few threads with similar issues and they suggest wiring the IP address in the printer setup process, but that does not work for me either. Very frustrating, any help would be great

    It could be disregarded in charge of your router BT of Hello.

    Let's try present first, if:

    1 reboot the router to BT by pulling its plug momentarily.

    2. download and install this: http://support.apple.com/kb/DL907

    3. restart your Mac.

    4 reset the printing system:

    -Go to System Preferences > print & Scan
    -Right (or control) click in the rectangle listing your printers and select Reset Printing System.
    WARNING - This will remove ALL your printers!
    -Select the sign more to add a printer. Select the default tab on the top of the window. Search for the printer, select it, and then beside the dropdown 'Use', select the model of the printer (not AirPrint). Wait for the 'Add' button becomes available. Until it clicks.

  • I installed my printer, but it wants to install again and again and again

    My printer HP Deskjet F2180, my system is Windows XP.  I installed my printer successfully, but whenever I turn on the PC it wants to install again & again & again.  It puts the PC and just won't let me continue unless I have pass through his process, but all I want a simple printer that doesn't act like an attention seeking spoiled child who keeps jumping up and down shouting "notice me, me" and makes my default printer.

    I talked to technical assistance from HP who sent me an e-mail long complicated instructions meant to counter the problem, I realized the letter, and that did not work.  They never answered my other emails.  I searched sections of Q and a HP sites and these support forums at unsuccessfully. I uninstalled and reinstalled, I fixed, says do not update for 6 months or more and simply ignored. But nothing can stop the process.

    Why can't be just one simple printer like any other, I had.  I also have a laser printer Brother that I use for everything except color printing and that everything is there waiting for me to use it, I had the other HP printers and recommended HP people because I never had a problem before unlike Epsom and Canon and then comes along the HP Deskjet F2180. He drives me crazy. It such a waste of time.

    In another where I work there is another HP printer (I don't know which model) which re - installs itself, is the default printer and is updated automatically, so I know I can't be the only person having this problem and makes me think that its an integrated - marketing this kind of thing.

    I'm not very technically in the know, and I don't know how to make MS-DOS or something like that. many instructions on these forums do not make sense to me, I'm afraid I need step by step, press this button type instructions now for what that substantive gubbings, but if someone can help me I would be very grateful.

    Is it that simple?  I did as you instructed and I look forward to a hassle-free printing I'll be in touch only if this does not work.  Thank you so much x

Maybe you are looking for

  • 5530 envy all-in-one: does not print want 5530

    When you print test pages everything works well, but when I try to print an e-mail or any other page all I get is blank pages.  No bad images or steaks anything else than paper ablank

  • recorded in documents ___folders

    When you save files in 'Documents', you just open a file and documents are everywhere it place, how do you put them in alphabetical order?

  • Problems with DOWNLOAD world BB blackBerry Smartphones

    Dear Sir I had problems with Blackberry "BOLD". BB world. This app need to upgrade. When I accept, he send me directly to BB pages to download, but nothing happened. Time exhaustion is mentioned on the page. Could you help me please? Stepan

  • Compaq mini password need

    Please help me D: when I start my pc, I getEnter the current password: x ect. then error fatal system hatlederror: CNU0052T9Z. Need help

  • lbyproc - JDBC configuration

    HelloMy 12.3 Documaker environment is:1 linux server - database documaker2 linux server - application site3 windows machine where documaker studio is installed and configured.I used to promote the elements with Studio of Documaker on the windows mach