I want to order an ink cartridge

Similar Questions

• WANT 5640: Identification of ink cartridges Pronter

  What should I C2P numbers average on all HP XL cartridges, and how to know which is the best for me to buy

  Hey @beanyboy,

  I understand that you are looking for the good XL cartridges for your HP ENVY 5640 e-all-in-one printer. I would like to help you today with this cartridge information today.

  "C2P" numbers you see are the reference numbers for the command.

  For your printer, the following cartridges are supported:

  • Size regular cartridge HP Tri 62: part No.: C2P06AN

  Performance Page: Up to 165 pages

  • Regular size 62 HP black cartridge: part No.: C2P04AN

  Performance Page: Up to 200 pages

  • Extra-large HP 62XL Tri color cartridge: part No.: C2P07AN

  Performance Page: Up to 415 pages

  • Extra-large HP 62XL black cartridge: part No.: C2P05AN

  Performance Page: Up to 600 pages

  Please let me know if this information solves your request. I look forward to hear from you!

• Want 5646: Ink cartridge black _ _ _ failure.

  I have a 2 month old HP Envy 5464. I just changed the cartridge to be confronted with the following error _ failure black ink cartridge.

  I tried removing, reinstalling, cleaning, turning off and then on reset but no joy.

  Please advise?

  In the paper here troubleshooting steps can help solve the problem.  Looks like you have already experienced at least some of these steps.  Please go through all the steps.  If the steps it do not solve the problem, you will likley need to replace the cartridge.  If it's a HP cartridge see warranty here information.

• HP Photosmart c7180 - wrong cartridge error - wants introductory ink cartridges that I have more

  Hello

  I need help, error compensation "error message cartridge wrong - use introduction of the ink cartridges that came with the printer. I no longer have the introductory cartridges and have only refill cartridges.

  Help, please...

  Jaye ~.

  Oops, the link I gave before has been registered regarding the C7180.  You can try an partial reset as described in this document.  If the partial reset does not solve the problem try a semi full reset, which is similar, but with the # and 6 buttons.

• My ink carriage does not move to the way to replace the ink cartridges. I think I put the ink in the wrong office

  My ink carriage does not move to the way to replace the ink cartridges. I think I put ink in bad officejet 3830

  Hello! Welcome to the community @Tammy111 HP

  I read your post about the ink carriage being stuck in your Officejet 3830, and I wanted to respond to troubleshoot. Try these steps and if the transport is not yet move to order so that you can access the ink, then your best bet would be to call phone support to see if they can replace the unit for you. I'll leave their details below.

  HP OfficeJet 3830, DeskJet 3830, 5730 printers - an error 'Transport Jam'

  Click on the thumb to below testify my help!

  Click on the "accept as Solution" if I'm you guide to a solution!

  Contact HP:

  Step 1. Open the link: www.hp.com/contacthp/

  Step 2. Enter the product number or select Auto detection

  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.

  Step 4. Scroll down and click on: contact HP options - click Get phone number

  File number and phone number appear

• OfficeJet Pro 6830: Installed new ink cartridges on 6830, but they were not full

  I've been using this printer for about two years now, been through "Print head problem" for both, they exchanged once and replace only the part once.

  My ink colour C, M and there were emptied at the same time, so I ordered all three in an online store. I installed a few minutes ago and check the ink level via the touch screen of the printer. It turns out that they are not quite complete. They are almost full, C and are close to full, but M is less complete.

  I wonder why this happens? I never checked the ink level in the past, but it surprises me. The printer makes some kind of calibration and printhead cleaning to get ready installed ink? (So consumed little ink)

  I scanned the QR code on the side of boxes of ink and checked the hologram stickers and pretty sure that they are genuine. The printer also said that they are authentic.

  Here is the picture of my ink level. Shot after installation of the cartridge and nothing printed.

  

  Another strange thing is the date of installation. Now it is April 4 in my country but the web printer configuration page shows cartridge installation date is April 1! I checked the date and the printer and everything is OK.

  If the cartridges have been used before, the printer screen would show a message that cartridges have been used on another front printer. I saw only me because I kept the old ink before trading in the past as I said up there.

  Please see a screenshot below

  

  Everyone knows what happened? Or it's normal? (The packaging and seal in plastic cartridges seemed fine, nothing suspected weird)

  Thank you.

  Welcome to the HP Forums

  @BlackMiracle,

  I came across your post about the concerns that you have with the help of your new ink cartridges and I wanted to share my own suggestions. The date being out for a few days is a bit strange, but the rest seems normal. Yes, when you install the cartridges, they are calibrated and alignment and clean, that uses a bit of ink. The levels that you see are also "estimated" levels If there are print quality problems or error messages, let me know and I'll do my best to help.
  
  I hope this helps!

  Click the thumbs up below to say 'Thank you' & the "Accept as Solution" If the problem has been resolved it please and thank you!
  
  All the best,
  
  Contact HP:
  
  Step 1. Open the link: www.hp.com/contacthp/
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on: contact HP options - click Get phone number
  File number and phone number appear

• Photosmart HP 7510: Change what black ink cartridge is used.

  Our 7510 HP ink slots for small and XL cartridges, however it will not use the small cartridge ink. How to change the parameters to pass to the thin cartridge XL, small is running out of ink and I can't find the black ink cartridge (Photo) in stores now. I bought two 'small', one was a XL, not labelled as such and we ordered cartridges from HP on the web and they were too big too. I need to be able to use the XL Black ink cartridge that is installed.

  Thank you..

  Hello

  First, XL ink cartridges are physically the same size with normal cartridges (same number). The difference is more inks XL cartridges.

  Your printer has 2 black ink cartridges, one narrower called Photo ink cartridge and one large/more bigger called black ink cartridge. When printing in grayscale, the printer will mix all the colors to give B & W. If you want to print black ink only, you must indicate to your printer. Please try

  (a) double-click the desktop printer icon.
  (b) click on set preferences.
  (c) click on advanced.
  d select "Black ink" only for printing in grayscale
  (e) click Ok/apply.
  
  Note: printer must still all color inks and it will consume a very small amount of ink over the warmng of trial.
  
  Kind regards.

• HP Deskjet 3600 series. Initializing ink cartridges? More than 3 partners? s

  Hello:

  I was recently offered a printer HP deskjet 3620 or 3650. I have only the manual for it to 3600 series moment.

  There are 27, 28 & 58 ink cartridges.

  My questions are:

  1} require initialization of ink as many HP printers do or can I use regular cartridges. The original inks disappeared somewhere in transit.

  2} If initializing cartridges are required are they still available?

  3} it is my understanding that this printer has never been created or had it ink.

  y at - there a way to tell if this is true? There is now no cartridge inside and it appears unblemished, even if all the original packaging has been removed.

  4} am I correct to assume that if the ink cartridges installed previously to a point that this printer is useless that the print heads are probably blocked.?

  Please notify.

  I saw this place is around the same time that your other post.  If you just want to know about the initial optimization process of your printer for the best performance?  To install ink cartridges are available and are used to prepare the print head, but are not absolutely necessary.  You don't have to contact HP for Setup ink cartridges for him.  You can call technical support at 1-800-474-6836 (US) or follow this link to get the phone number for your country and ask them to order it.  Or call 1-888-999-4747 HP Home and Home Office, but I don't know if you can get them at the store. Just as a previous tech support agent I know I could order setup of ink cartridges.

  A lack of alignment can occur if you do not use the first time ink installation cartridges, but I doubt it.  There is no way of knowing if she has never had ink in it before without having already inked and install on the computer in order to access the Toolbox and then choosing to print a test page that may have this information on it.  On newer models,'s called it a Printer Status Report.  It will tell you all about his prior use.

  I don't think the printer hangs another ink in there if there is no ink installation cartridges installed the first time.  I don't know the refilled ink cartridges may damage the print head, but I think that you will be sure to use regular ink you'll be safer if you call, your printer is in or out of warranty.

  Here is a nice little document all about these issues and much more.  I hope this helps!

• OfficeJet Pro 8500 Wireless - ink cartridges

  I have had this unit for about two years. Use it mainly for scanning, not a lot of printing.

  After about four months, after printing next to nothing with him, I had to replace all four cartridges. Not one, but he had to have all four. All four ran empty cartridges at the same time.

  About eight months later, ditto.

  About eight months later, ditto.

  And now, about eight or nine months later, once again.

  I don't use it enough to empty one of the ink cartridges in this period of time, much less than each of them.

  What is happening on that he needs new ink cartridges so often?

  It is absolutely impossible that all four ink cartridges would go dry at the same time - four times. Is something wrong with the printer?

  Windows XP. The cartridges were all HP.

  Thank you.

  Hi stevewest26,

  If you leave the printer turned on 24/7 the printer will do a printer maintenance to avoid the cartridges get clogged. During the maintenance of the printer it use some of the ink in all 4 cartridges to properly initiate the print heads and keep the printer in good working order for you when you want to print. It is best to let the printer on so that he could complete the period maintence of this way you don't end up throwing the printheads due to jets of a bite. If you are not using this printer to print you may consider a scanjet do your scans. I hope that explains why you see the cartridges being exhausted.

• printer ink cartridge clip v305w

  Went to change an ink cartridge today on this printer and I broke a piece, not sure what its name, but this is the clip that you push down once you put the ink cartridge, it holds the color series 9 cartridge in.  I don't want to buy a new printer, love this one but do not know what we call this point in order for me to get a new one.

  Rabia,

  Unfortunately, I'm not sure that the piece can be replaced. You can contact Dell spare parts to the 1-877-717-3355 for more information of the party.

• Want to 120 aio: Missing cartridges SETUP for 120 want aio

  Hi, I wonder if anyone can help?

  I recently bought a printer aio want 120 renovated (by HP).

  But get the message "Please use the cartridges installation program", but the printer did not come with any.

  The retailer has no parts broken off and said that he had not returned with any.

  I can't find any way to order HP spare parts.

  Any info on the acquisition of a set of 300 HP would be greatly appreciated.

  Thank you

  Sam

  Hi Sam,

  Could you please let me know the exact printer model and the exact error appearing on his screen?

  The HP Envy 120 uses all cartirdges installation, these cartridges of configuration is required only for other type of printers with 4 ink individual... will appreciate your clarification if the error may be slightly different on the printer or the printer model is different, such is not intended for the specific model and any standard ink cartridge should be used at a time using the device for the first time.

  As you will ifnd by his regular sheet ink cartridges come with the printer, such as listed in the who is in the section of the box:

  http://h20195.www2.HP.com/v2/getpdf.aspx/4AA4-2274EEE.PDF?ver=0

  When a printer require cartirdges Setup, it is clearly stated in the data sheet you can see by the example below:

  

  Kind regards

  Shlomi

• Want 5661: Envy 5661 - "ink and toner for this printer is no longer supported by HP.

  I bought my desire 5661 at Costco, not so long ago and now find the ink cartridges are abandoned? It is still under warranty!  How can I source HP cartridges or what are my options?

  Hello

  You can order:

  https://h22203.www2.HP.com/SureSupply/printers/ink/HP-envy-5661-e-all-in-one-printer

  Kind regards.

• all-in-one HP Deskjet 1512: remove ink cartridges

  Hello

  I've just set up my new printer, but the light of attention and two ink cartridge lights continue to Flash.  I can't figure out how to remove the cartridges, so I try to reinstall them.  I did exactly what the instructions said to do, but obviously done something wrong.  Help, please... Please, I am a real novice in all of this, go to A, B, C for me.  Thank you

  @Emerald4043 , welcome to the forums

  I saw your post on ink cartridge problems you're having with your new 1512 Deskjet and wanted to answer with my ideas for you.

  Even if you can not see this specific error message, try the steps outlined in this guide. I have crossed their me and think that images and steps should be useful:

  An "Incompatible cartridge or"Missing cartridge"Error Message is displayed for HP Deskjet 1510, 2540 Deskjet, HP Deskjet Ink Advantage 1510 and Deskjet Ink Advantage 2540 all-in-One Series Printer"

  If you find that the guide did not help and the problem persists, try to give us a call to see what are your printer options:

  Please contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number. http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  Have a great Tuesday

• Ink cartridge missing or not detected

  I feel as usual.  I went to another sheet of printing, and it came on my printer.  "Ink cartridge missing or not detected".  Earlier today, I put in a new black ink cartridge.  I took out and the color one, again no change.  I connected the printer to the front and back, waited, plugged back without success.

  I don't know what is the cause and I'm not very irritable with computers.  I thought to change color ink, but he is looking fine on the papers that I printed.   Help, please.  The printer is older, but I take care of it and have never had a problem until now.  It is a HP Photosmart C4240 all-in-one.

  Thank you!

  Nevermind I found the answer.  I copy the information because it worked!

  I found this video very useful.

  The steps are also listed below

  1. press the button and the button cancel at the same time.

  2. you will be asked to enter a special code press the blue button, green button and the grey button (in that order, one after the other).

  3. press the grey button until the Menu "information".

  4. press the green button.

  5. press on the gray button until you reach checksum to lock new data entry.

  6. press the green button and wait a certain number to appear. It will be a random number and is not important beyond his generation.

  7. press the button cancel three times to exit.

  8. try the print message should be gone.

  I hope this helps. I know that it's my YAY!

• 6525 adapter black ink cartridge

  I have a printer HP 6525.  I bought a pack of new ink cartridges and fits very well except black.  The black cartridge for installation is about twice the width of one supplied with the pack.  Y at - it an adapter for the smaller cartridges?  If yes where can I get one?  ramroc

  Hey @ramroc ,

  Thank you for taking the time to post on the HP Forums today! Hope you enjoy the experience.

  You use the HP Photosmart 6525 and you are having problems with the new ink bought because you have a black man who is smaller, then the slot in the transport.

  What happened here most likely bought the HP 564 cartridges with the 5th black cartridge is a black picture for the Photosmart HP 7520. The black cartridge you want to use is the one with a Pentagon on the top, not a bow tie.

  Should resemble what your transport;

  

  Looks like that the transport of HP Photosmart 7520;

  

  You want to make sure that you use the cartridge with the Pentagon not the bow tie.

  Hope this makes things easier for you. Have a good!