I want to print. 'selection' and ' Print frames are dimmed.

Similar Questions

• My laptop is blowing! Keyboard and the frame are deformed

  Hello world

  Since one-two, the framework of my laptop (under the keyboard) began to blow himself. So, it's as if a ball is under my keyboard, my frame is completely distorted.
  I have send as 10 messages on twitter to Toshiba France but no answer!
  I have 5 email to customer service, same thing! Just a response to say that my application has been forward to the technical service!

  It is quite unacceptable to Toshiba! I'm afraid that this is due to the battery and she comse point to explode...

  Could you please help me with this question. Toshiba should solve this problem because it's their fault if their battery is not consistent! I am amazed to have no response.

  Please see attached pictures. It's much more impressive in reality than in pictures. I'll make a video this week.
  https://drive.Google.com/file/d/0B1V9vKXb-4x3QmV1YVdzZ0xCNHc/view?USP=sharing https://Drive.google.com/Open?ID=0b1...XRtYnhYSzZVbUk
  

  Concerning
  Lionel

  I sent another reminder (the 5th) to Toshiba sevice support but still no response on their part...

  I don't have any tools to open my laptop off the battery.

  I don't know what to do! Toshiba offer battery and we should not say nothing...

• I want to print in black and white only on my hp photosmart 6520

  Photosmart 6520 windows 7 How do I put this so it prints only in black and white not color at all times.

  Hi macys.

  Welcome to the HP forums!

  Implemented a Photosmart 6520 for black ink only from your Windows 7 computer? That I can help with

  You will want to start devices and printers (via your control panel) with access to your folder and right-click on your Photosmart 6520 icon and select Printing Preferences. The window that opens will be similar to the display on the left of the screenshot below. On this screen you click the Advanced button, and then you will see a screen similar to the one on the right of the screenshot. There, you go the black ink only setting and press OK. Press and then apply on the previous screen before pressing OK again. The driver will now be on use black ink only.

  

  Let me know if that does the trick for you!

• HP ENVY 5644 e-all-in-one Prin: I want to print in black and white

  Hello

  I wanted to print in black and white but still my printer print in color when there is a picture in the paper, it's really annoying because when I go to the properties of the printer I press black and white or black press ink only then when I press on save, I'll be back in the printer properties to find her back to color No matter how many times I put it in black and white it goes back to color. I tried pressing black and white and not return to the printer properties, but it still prints in color. Also, I changed my default settings of the printer in black and white through the control panel and tap Save. When I go into Control Panel, its saved printer properties such as black and white by default, so that's good. But for some reason when theres color of text or an image on the page I want to print, I can not change to print in black and white, keeps coming back to color.

  Please help me!

  Hello @Matthew002, hope you are well!

  Thank you for joining the HP support forums, I would like to help

  I understand that you are having problems when printing in black and white and also the printer goes "offline".

  Going through your post, this could be a problem with the printer drivers. In this case, we might need to uninstall the drivers and re - install the same.

  • If present, disconnect the USB cable between the printer and the computer.
  • Go to control panel of configuration-programs and feature - select the HP Envy printer entries and uninstall them.
  • Restart your computer.
  • Now, click http://ftp.hp.com/pub/softlib/software13/printers/en5640/Basic_Webpack_x64-40.2.1073-EN5640_Basicx64_Webpack.exe and install the printer drivers.
  • If you are prompted, connect the USB cable.

  Now try to change the printing preferences:

  • Go to control panel - devices and printers - give Envy 5640 right-click and select Printing Preferences.
  • In the pop-up window, click on the 'Advanced' button - check for printing in grayscale option. Make sure it is turned on

  PS: Your printer support mode single cartridge. So if you want to completely stop color printing you can get out the color cartridge and use only black.

  Let me know if this helps. Good luck!

  See you soon

  Please click on 'acceptable' on the post that solves your problem to help others to find the solution. To show gratitude for my help, please click the 'Thumbs Up icon' below!

• using the color laserjet 3600n - I want to print in black and white, but it prints black and white negative. * beep *.

  using the color laserjet 3600n - I want to print in black and white, but it prints black and white negative.  * beep *.

  I was able to recreate what you see.   I managed to work around it by installing a different driver that is also supposed to be compatible with the CLJ3600.

  Please consider trying this as a possible solution:

  (1) uninstall the driver CLJ3600 by opening printers and fax machines, driver selection and right-click on it and select Delete.  Once it is removed, right-click on an empty space in the windows printers and faxes and select Server properties.  Click the driver tab, click the CLJ3600 and then click on remove.

  One when you're done, restart, and then install the CLJ3500 driver.  This is a previous version of the driver that has been implemented for the CLJ3600 and is compatible with the CLJ3600.

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=18972&prodSeriesId=315862&prodNameId=315867&swEnvOID=228&swLang=8&mode=2&TaskID=135&swItem=LJ-16838-3

  After installation, try printing again.

  The output I have indicates it will print is more negative.  Please let me know if you have success.

  One caveat about this solution.  The Color LaserJet 3500 doesn't support duplex.  Of workaround only works for two printing on the package of basic or the Color LaserJet 3600 N.

• Printer Dell 1100 printed in white when I am on the internet and I want to print any page. The printer works in the office.

  Printer Dell 1100 printed in white when I am on the internet and I want to print any page. The printer works in the office.

  I need help please

  If it is printed in white on white paper how you see it?

  Check your printers settings in his program in place.

• HP 4520: Eprint and all in a print module won't let me pick the paper size I want to print 5 x 7

  EPrint and all in a print module doesn't let me choose 5 x 7.

  Hello

  Are you referring to the eprint & all in one apps for android?

  Please make sure you have the right selected and that all other paper size and paper type settings are correct.

  Another option is to download the plugin from HP for android (you must also enable it in Settings download afte) and try to print that way. Once downloaded and activated, you should have the ability to print photos directly without going through the applications.

• I want to print black and white with empty color cartridge. My model is all-in-one HP Deskjet 4288.

  I want to print black and white with empty color cartridge. My model is all-in-one HP Deskjet 4288.

  The Deskjet F4288 joined the printheads on the ink supply.  These are replaced at each change of cartrdige so there is no concern about printing empty color or black cartridges.

  You should be able to print in ink entry mode "backup" by removing color (or black, but not both) cartridges.  There will probably be a warning message about ink backup mode but you should be able to print and the printer will work regardless of the cartridge is available.  In handwritten backup with the only color black cartrdige mode areas will print in shades of gray.  If print ink backup mode only the installed color cartridge then black will be printed by mixing colors.

  See page 75 of the manual here, that says:

  Use the entry ink-backup mode
  Use ink-backup mode to operate the HP all-in-one with only one cartridge. The
  ink-backup mode begins when an ink cartridge is removed from the print cartridge
  transport. During the ink-backup mode, the product can only printing from the computer.
  You cannot start a print job from the control (such as copying or scanning a Panel
  original).

  NOTE: When the HP all-in-one device works in ink-backup mode, a message is
  displayed on the screen. If the message appears and two print cartridges are installed
  in the product, check that the piece of tape plastic protection has been removed
  each print cartridge. When the plastic strip covering the contacts of the print cartridge, the product
  cannot detect the cartridge is installed.

• I must have accidentally downloaded Adobe DC.  I can no longer save or print my attachments without having to pay for a subscription, which I won't do.  I have a Mac.  I want to uninstall DC and reinstall XI, but the first step said to go to the creative

  I stupidly downloaded Acrobat DC and now I can no longer save or print my attachments without buying a subscription which I don't want.  I want to uninstall DC and reinstall XI. The first step said to go to the creative cloud, I did not. Thank you.

  Hi sharonj83072502,

  Are you referring to DC Acrobat or Acrobat Reader DC.

  Acrobat Reader DC is a free application & Acrobat DC is a purchased app.

  To uninstall the application, do so simply in the Applications folder in the trash folder.

  Restart your Mac & if you want to install Reader 11, you can download it using this link https://get.adobe.com/reader/enterprise/ , else if it were XI Acrobat, you can download using this link Download Adobe Acrobat products. Standard, Pro | DC, XI, X

  Kind regards

  Nicos

• I have a 2 page PDF, but I want to divide pages and save each in a single document. How to do that without having to print and scan?

  I have a 2 page PDF, but I want to split pages and save each in a single document. How to do that without having to print and scan?

  Cannot be done with the player; you will need Acrobat for that.

  If you do not have Acrobat, and it is a unique work, you can use the 30 day trial of Acrobat Pro DC: https://www.acrobat.com/en_us/free-trial-download.html

• I work with SAP HR and I want to print a HRFORM; When I try I get this message: ' Hi ha a problema amb the Adobe Acrobat/Reader. TR is esta performer, tanqueu-lo i torneu - ho a provar. (507:507)

  I work with SAP HR and I want to print a HRFORM; When I try I get this message: ' Hi ha a problema amb the Adobe Acrobat/Reader. TR is esta performer, tanqueu-lo i torneu - ho a provar. (507:507).

  Thanks in advance.

  Juan

  Thank you very much, Rahul, but the problem is in the patch level of the SAP Logon for Windows: with level patch 2 it doesn't work; with the patch of level 7, I can view and print the pdf HRForm without problems.

  Kind regards

  Juan

• Xerox printer Phaser 8560, whenever I try to print it want to save paper and it never printed.

  Whenever I try to print a document it wanst to save the document in a file and it never printed.

  Hello

   
   
  1. what version of operating system that you use in the computer?
  2. you receive an error message?
  3 did you do changes on the computer before the show?
  
  Method 1:
  You can solve this problem with the boot.
  Reference:
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.
  
  Method 2:
  You can also check if the printer drivers are updated on the site of the manufacturer provided:
  http://www.support.Xerox.com/support/Phaser-8560/downloads/enus.html?OperatingSystem=Win7
  You can check the link:
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly
  
  You can also check the link provided and check:
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

• Want 5660: Printing on both sides of a sheet

  I love the ability to print on both sides of a sheet of paper.

  I know that if I have a document that has multiple pages in can I print every 2 pages on a single sheet.

  What I have is several files, each a page definition, but I would like to select, say, 2 files and say: "Print on both sides" and it would print the first file on the file 1 and the 2nd side on side 2.

  > >... What I have is several files, each a page definition, but I would like to select, say, 2 files and say: "Print on both sides" and it would print the first file on the file 1 and the 2nd side on side 2...

  Each file you want to print, the printer driver generates a print job that is sent to the printer.

  The printer interprets the content of the print job and prints the requested page or images, then (at the end of the work), all incomplete pages are printed and emptied of memory.

  If the next job always starts on a new sheet of paper, regardless of the setting, simplex / duplex.

  The only ways you could accomplish what you want are:

  • Find someone to write you a customized printer driver who would take the content of the two source documents offered as input to produce a single output print job; even if you could find someone to do this, it would probably cost more than the printer (or several of these printers).
  • Merge documents two sources (Word, Excel) entry in a new source document, then print it.

• Photosmart 7510 want to print photos off smart phone on photo paper but ends by printing on a4

  Photosmart 7510, I want to print pictures on my smart phone, when I tried always printed on A4 plain paper even if there is no photo paper in the photo paper tray, im obviously something wrong or missed something.

  I understand you are trying to print photos on photo paper. If you use a device the Hp ePrint home and Biz app android and iPhone download Hp ePrint app download. With the application after you have selected the photo, you can go into the settings and select paper size.

  Let me know if it helps.

• How to print an email received without getting ads that cut the sides of the msg. Want to print full-page display e-mail?

  When printing email, only a narrow part of the msg prints. How I printed all msg?

  EstelleF

  What e-mail system?  If she's Outlook.com.

  1. go to your Inbox

  2. Select the desired message you want to print

  Please select the three dots (...) next to categories

  4. click on print

  5. a preview of the message is displayed and also printing options. (don't forget to click on "all pages" for multi page email.)

  Just click print.

  Dyami & Wanikiya
  The zig - zag team