Sysprep and SIDS
I create templates for Windows 2008 R2 the final step of each creation is a /oobe/shutdown sysprep.
Once the template is cloned and booted up, we do an other sysprep /oobe /reboot. The second sysprep is supposed to be in order to change the SID... Question: Is the only changed SID by using the / generalize? If I use the / option on the model to generalize and then clone, can I get a different SID every time?
The big question is: is sysprep / generalize the only way to reset the sid?
I also noticed that the option on the causes of non bootable for appear offline and IPV6 devices model gets active reset / generalize. Is there a way around this?
Hello
Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.
http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer
See you soon.
Tags: Windows
Similar Questions
-
I dropped my phone in a small bowl of water, but only the top wet! (Camera and side buttons) but I caught as fast as I could and I put it in rice! The camera picture and everything work fine, but these last two days the phone has acted a bit! As it is a bit slow (which im hoping is just my access provider) and this morning I plugged my headphones, but they were not involved. It's as if they are not yet connected. Until I restarted my phone! All this may be water damage! Once again; the camera works very well and the buttons are too! I can take it to the Apple Store to watching it!
Is one of the newest phones. He should not have these problems. Water works in many ways where electrics are concerned, and few of them are to our advantage. Bring it to your local Apple store and ask for an assessment.
Guarantees exclude the water damage.
-
I need some Windows 7 machines to the test. I have licensed ten machines. How to keep the machine base up-to-date on Windows Update?
I would like to create a basic machine that Windows 7 is installed. I like to keep up-to-date via Windows update. When I need to do some tests I clone the virtual machine base and create environments as much as necessary (up to ten machines license).
How to keep the base up to date machine?
Should I create a virtual machine with Windows 7 installed and update and when I need clones for test run sysprep and use syspreped image to create clones?
Is there an easier way to do this?
Unfortunately, it's the broken link is important:
Take a look at the 'Windows XP Mode IT Pro video deployment', they also explain how sysprep a VHD.
None of the other remedy.
I came to the conclusion that the best thing for me is to maintain a base for each OS machine I could need. When I need a new test machine, I'll just copy the basis, start, and change the license key and the machine name.
-
When it is run Sysprep and Capture task requires user name and password and won't restart
MDT 2012
I have a Windows 7 reference image. I should be able to start on this OS, map a drive to the scripts directory and run litetouch and select my task "sysprep and capture. When I run that he just ask a local username and pass and don't restart or ask where I want to put my image.
I also run sysprep manually and PXE-started and ran the task but same result. A few dialogs that require local administrators and passowrd but never a location to copy the image from.
When I created the sysprep and capture task, she prays for a picture that is strange. why he poses for a picture when the sysprep and capture task is intended to create an image.
Your question is the best answer in the IT Pro Forum: http://social.technet.microsoft.com/Forums/en-US/w7itproinstall/threads
J W Stuart: http://www.pagestart.com
-
Photoshop cs5.5 - loaded on windows 8 - way too small! top and sides
Hello
I just loaded CS5 (and 5.5 updates) on my computer of surface pro 3 of microsoft windows 8.
the top and sides are so small that you cannot read.
I mainly use photoshop; but I loaded the fixed whole web of dvd.
is there something I can do?
Thank you!
Yes. CS5 is released when the laptop screen of 1366 x 768 and below resolutions are more frequent.
Photoshop CC 2014 offers a setting of 200% of your screen high resolution if you want to pay $10 / month for the edition of cloud.
Gene
-
The difference between the service name and sid
Hi all
1. I am not able to understand the difference between Service_name and SID.
2 and I have 3 different databases (such as 9i, 10 g, 11 g) with 3 cases in each (6 total), I can configure a listener for all databases and all cases, as I have found in some documents that we need to define the list of SIDS in listener.ora file.
Please help me in this regard
Thanks in advanceMenas SID number so, for each instance there is a unique SID in the server. Service_name is nothing more that an alias name for the name of the database in a system not CARS. But in a RAC system, there are some other additional features.
Yes, you can create a single listener to a 9i, 10g and 11g database, but make sure that when you start the listener you should start it superior version, here, in your case, you should start the listener binaries of 11g.
-
Hello!!!
I am a student of WDP funa-1 9i DBA. I need help:
(If I'm not mistaken) v$ session is seen dynamic that store information about oracle.but my question is why no_serie and SID is needed to kill the session? Why not only SID to kill the session?
Another thing is that a user can use several session(as_oracle_does_not_restrict_to_do_so).we observed there is a unique - ment for Serial # so why do we need to mention the SID to kill the session?
And my last question is, how the SID and the serial no is generated?Hello
my example comes from a RAC system where there are two instances of 'collaborators' on the same database, so that you can easily see two sessions with the same sid in sid
' is reassigned permanently, and so if a session ends, next session connection could have the same sid assigned, while the serial no is a sort of counter ", which is
incremented each time that a sid reused by anotehr session id"(from Oracle9i Database Performance Tuning Guide and reference), it's like a 'measure' of how
Once a sid is reused. In addition v$ session.audsid, too, can be used to identify a session
SQL> select sid, serial# from v$session where program like '%Pl%'; SID SERIAL# ---------- ---------- 139 37758 142 41671 SQL> select sid, serial# from v$session where program like '%Pl%'; select sid, serial# from v$session where program like '%Pl%' Not logged on <---------- Here I Logged off SQL> select sid, serial# from v$session where program like '%Pl%'; SID SERIAL# ---------- ---------- 139 37768 142 41683 <----------- System regave me same sid, but SERIAL# incremented
I can only imagine that the couple sid, serial # gives you more 'precision' to get the good session, and of course it is not in absolute terms, the only method for
identify a session, but it is the implemented method oracle developers. They're just assuring us that we kill not bad sessions!
Good bye
-
These cascading windows things and also put side by side.
This has happened
Each time Firefox opened
Hello Dave.
Please show us a screenshot of the problem.
In any case, I'll venture a guess that you have a problem with some Add on Firefox which is an obstacle to the normal behavior of your Firefox. Have you tried to disable all add-ons (just to see) to see if Firefox goes back to normal?
Whenever you have a problem with Firefox, whatever it is, make sure that it's not one of your modules installed, be it an extension, a theme or a plugin. To do this easily and cleanly, start Firefox in safe mode , and then select disable all add-ons. If the problem goes away, you know that it's an add-on. Disable them all in normal mode and allow them one by one until you find the source of the problem. See this article for more information on troubleshooting extensions and theme. You can troubleshoot plugins in the same way.
If you want supported for one of your modules, you will need to contact the author.
-
Selection of power SUPPLY and sides AMPS?
Hello
I need a new power supply, measured the size of the unit, got all the details.
Power 300W max, + 5v and + 12v 268W, + 3.3V and + 5v 175W
I am agree with watt side. , But after reading a lot of the information contained in this post, I never see any mention of AMPERE ratings on different volt rails. Are the AMPS without importance in the choice of a PSU?
I guess that if the power is correct the AMPS will be correct?
My PC is: http://support.hp.com/us-en/document/c00590930
Original power supply: HP 5188-2626
Max 300W power
+ 5v and + 12v does not exceed 268W
+ 5v and + 3, 3V not exceed 175W
DC output:
+ 5v/25 has. + 12v/19 has
+ 3.3V / 18 a. - 12v / 0. 8A
+ 5vsb/2 has
Thanks for your help.
SID.
This new power supplyis greater than your minimum
-
shadow of hand and side of the plain of background color / wallpaper
Hello. I have a slate 7HD for when out and about, that I'm unable to write by hand. I'm really happy with it and use a background application to solid without any problem. However, my mother and I got ourselves a 10HD slate this week and get a boring shade on each side of the background / wallpaper. This does not happen if you use a photo background, which is not what I want to do.
If anyone can help, I would be really grateful. Thank you
Sarah
Cornwall, England
I found the cause - a framework to Apex Launcher...
-
After Effects 13.6.0.165 not possible to zoom and side views of camera?
Hello
just updated to 13.6.0.165.
It seems that it is not longer possible to zoom in on or the side of the camera by using the mouse wheel views. That was really very convenient and more fast as always click on the drop down menu to each view and choose 100%, 200% and so on.
Anyone else facing this problem and want to be fixed, or is it a hidden option, I missed?
13.7.0.124 Finally fixed.
-
Hello
I prepare templates to implement catalog for our customers. The tepmlate includes the command slmgr.vbs xx.xx.xx.xx /skms to point to our KMS server.
Given that most of them asking how to activate windows, and they generally want to activate Win as soon as possible, I decided to create a very simple package, say, activate_windows.bat, with inside a simple "slmgr.vbs /ato.
The problem I am encoutering now is that after the model deployment (sysprep), this file that I put on the desktop (the easiest place for customers to find) disappears.
I know, this is the normal behavior but... How could I tell to remove the bat file?
Thank you
BR
RAF
Thank you... As soon as the office on Monday, I will try. I'm sure this would work :-) And Iíll close the post.
Thanks again
-
Database SID and SID of target database catalog is be
Hello
my database of catalog SID is PROD @ rmandb
and target database is SID PROD @ test8
How do I configure the tnsnames and connect to the database to record the catalog
RMAN target sys/sys@PROD rcvcat rman/rman@PROD
Save the database;
Verification through tnsping on RMANDB
tnsping PROD
AMT Ping Utility for IBM/AIX RISC System/6000: Version 9.2.0.3.0 - Production on 24 February 2013 21:32:33
Copyright (c) 1997 Oracle Corporation. All rights reserved.
Use settings files:
TNSNAMES adapter used to resolve the alias
Try to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=rmandb) (PORT = 1524)) (CONNECT_DATA = (SID = PROD)))
OK (0 msec)
1. is it necessary to have different SIDs?
2. for the two database DBID is different.
Thank you.981553 wrote:
Hellomy database of catalog SID is PROD @ rmandb
and target database is SID PROD @ test8How do I configure the tnsnames and connect to the database to record the catalog
RMAN target sys/sys@PROD rcvcat rman/rman@PROD
Save the database;Verification through tnsping on RMANDB
tnsping PRODAMT Ping Utility for IBM/AIX RISC System/6000: Version 9.2.0.3.0 - Production on 24 February 2013 21:32:33
Copyright (c) 1997 Oracle Corporation. All rights reserved.
Use settings files:
TNSNAMES adapter used to resolve the alias
Try to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=rmandb) (PORT = 1524)) (CONNECT_DATA = (SID = PROD)))
OK (0 msec)1. is it necessary to have different SIDs?
2. for the two database DBID is different.
Thank you.
Name two different databases, the same is a very stupid thing to do. I correct that if I could. However, assuming that 'rmandb' and 'test8' are the names of two different servers, your tnsnames would look like this
prod_rmandb = (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)(HOST = rmandb)(PORT = 1521)) ) (CONNECT_DATA = (SERVICE_NAME = prod) ) ) prod_tes8 = (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)(HOST = test8)(PORT = 1521)) ) (CONNECT_DATA = (SERVICE_NAME = prod) ) )
And your connection string would be
rman target sys/sys@prod_test8 rcvcat rman/rman@prod_rmandb
-
deploy multiple virtual machines using vmdk and SID file
Hello
Need to know if I am correct or miss me something... I deploy many virtual machines using method.
1. remove the vmdk files a XP.
2. create new folders and copy the vmdk into this folder.
3. create virtual machines using existing vmdk files.
4 rename the computer and join it to the domain.
My question is, my VMDK files are an existing xp VM (no longer exist), what is the status of the deployed virtual machines? they still have the same SID or it is changed? I managed to join to the domain, but do not want surprises in the future.
Note:
I had another option, could have all these automated with new SID using PowerCLi, unfortunately, osCustomization has default, I can't event run the get-OsCustomization command, it keeps failing.
Thank you.
Yes, Windows writes the SID on disk (virtual disk for virtual machines) or physical disk for physical machines. The guest operating system has no idea on the vmx file.
Dave
VMware communities user moderator
Now available - vSphere Quick Start Guide
You have a system or a PCI with VMDirectPath? Submit your specifications to Officieux VMDirectPath HCL.
-
Sysprep and Windows Activation
Hello!
I noticed that on the models that require Sysprep, the virtual machine must have responsive Windows. It's a bit embarrassing because it can be easily overcome.
Article (http://support.microsoft.com/kb/302577) details that you can run sysprep with the active switch, and it will not be awarded to zero activation of Windows setting. That would solve my problem, but I don't know if there is somewhere I can modify the command sysprep.
When the LM command would change to make it work with the switch?
Thank you
-Jesse Reinhart
no other options exist (as far as I know), more on sysprep with the activation works.
Similar problems exist with Windows 2008 because you can only use sysprep to customize which.
Kind regards
EvilOne
VMware vExpert 2009
NOTE: If your question or problem has been resolved, please mark this thread as answered and awarded points accordingly.
Maybe you are looking for
-
Satellite L750 slow to load windows
Hi, I have a Toshiba Satellite L750/L755, and I had some problems starting windows after you use the tool/toshiba recovery disk So, this is what happened: I reached the maximum capacity on the C: drive, so I started data transfer to D: drive that was
-
Bluetooth missing Thinkpad Twist S230u
Today my bluetooth has disappeared... it can not find anywhere... Not eaven in Device ManagerProblem with drivers or what? Please information! I can't use my bluetooth mouse and my helmet!
-
How to check the version of the firmware of the HP Photosmart 7525 is up-to-date? And where can I go to download the latest firmware?
-
PSC 2175v: (REMOVE AND CHECK CARTRIDGES)
2175V (REMOVE AND CHECK the CARTRIDGES) even after I changed new ink cartridges. He said that with the old inkjet cartridges and the new, I cleaned the ink jet cartridges and the print head. Help?
-
How to download and install Red Faction
Ok. I downloaded games for Windows, but when I download RedFaction after downloading it do anything and I am new to PC games please help me.