I7 2630QM CPU speed problem

Similar Questions

• X 220 CPU speed problems

  I saw my CPU it's maximum speed of 3.4 GHz the first time I had used to hit. After download and update all drivers Lenovo & Windows, etc., the speed seems to be stuck at 797,3 MHz, no matter what I do. I did adjust the settings via the power manager. BIOS is 1.21. Any help on this would be appreciated.

  Edit: This seems to happen only when I'm on a/c without battery and when it's on battery power only. It is fine when I am on a/c with a battery.

  You must run the laptop with the battery, if you want the full speed, you may need to upgrade to the 90 Watt adapter.

• any ideas? ~ macbook pro (13-inch mid 2009) speed problem & sound a1278 ~ el capitan 10.11.5 (15F34)

  any ideas? ~ macbook pro (13-inch mid 2009) speed problem & sound a1278 ~ el capitan 10.11.5 (15F34)

  
  

  EtreCheck version: 2.9.12 (265)

  Report generated 2016-06-25 16:47:10

  Download EtreCheck from https://etrecheck.com

  Time 02:21

  Performance: Excellent

  Click the [Support] links to help with non-Apple products.

  Click [details] for more information on this line.

  Verify the signatures of Apple: enabled

  
  

  Problem: Computer is too slow

  Hardware Information: ⓘ

  MacBook Pro (13-inch, mid 2009)

  [Data sheet] - [User Guide] - [warranty & Service]

  MacBook Pro - model: MacBookPro5, 5

  1 CPU 2.53 GHz Intel Core 2 Duo: 2 strands

  8 GB of RAM expandable - [Instructions]

  BANK 0/DIMM0

  OK 4 GB DDR3 1067 MHz

  BANK 1/DIMM0

  OK 4 GB DDR3 1067 MHz

  Bluetooth: Old - transfer/Airdrop2 not supported

  Wireless: en1: 802.11 a/b/g/n

  Battery: Health = Normal - Cycle count = 7

  Video information: ⓘ

  NVIDIA GeForce 9400M - VRAM: 256 MB

  Color LCD 1280 x 800

  Software: ⓘ

  OS X El Capitan 10.11.5 (15F34) - since startup time: less than an hour

  Disc information: ⓘ

  SAMSUNG SSD 840 EVO 250 GB disk0: (250,06 GB) (Solid State - TRIM: No.)

  EFI (disk0s1) < not mounted >: 210 MB

  a /Volumes (disk0s2) / has: 50,00 (GB 49,84 free)

  b (disk0s3) /: 199,07 go-go (160,81 free)

  Recovery HD (disk0s4) < not mounted > [recovery]: 650 MB

  HL-DT-ST DVD - RW GS23N)

  USB information: ⓘ

  Built-in ISight from Apple Inc..

  Card reader Apple

  Apple Inc. Apple keyboard / Trackpad

  Computer, Inc. Apple IR receiver.

  Apple Inc. BRCM2046 hub.

  Apple Inc. Bluetooth USB host controller.

  Configuration files: ⓘ

  / etc/sudoers, 1242 but file size expected 2299

  Protection of the integrity of system status: disabled

  Guardian: ⓘ

  Any where

  Kernel extensions: ⓘ

  / System/Library/Extensions

  [no charge] com.native - instruments.driver.NIUSBDeviceHelper (1.0.8 (R32) - 2016-06-25) [Support]

  Launch system officers: ⓘ

  [loaded] 7 tasks Apple

  [loading] 165 tasks Apple

  [operation] 66 tasks Apple

  Launch system demons: ⓘ

  [loaded] 47 tasks Apple

  [loading] 164 tasks Apple

  [operation] 79 tasks Apple

  Launch demons: ⓘ

  [loading] com.adobe.fpsaud.plist (2016-06-14) [Support]

  [loading] com.malwarebytes.HelperTool.plist (2016-06-25) [Support]

  User launch officers: ⓘ

  com.apple.CSConfigDotMacCert [fail]-[...] @me.com - SharedServices.Agent.plist (2016-06-23) -/System/Library/Frameworks/CoreServices.framework/Frameworks/OSServices.framewo rk/Versions/A/support/CSConfigDotMacCert: Executable not found!

  [loading] com.google.keystone.agent.plist (2016-06-23) [Support]

  Items in user login: ⓘ

  gfxCardStatus Application (~ / Downloads/gfxCardStatus.app)

  Hidden Google Chrome application (/ Applications/Google Chrome.app)

  NIHardwareAgent Application hidden (/ Library/Application Support/Native Instruments/Hardware/NIHardwareAgent.app)

  Other applications: ⓘ

  [ongoing] com.Apple.XPC.launchd.oneshot.0x10000002.Google Chrome

  [ongoing] com.eidac.smcFanControl2.54432

  [ongoing] com.etresoft.EtreCheck.6112

  com.google.Chrome.47072 [loading]

  com.native-[ongoing] instruments.NIHardwareService.54752

  [loading] 411 tasks Apple

  [operation] 176 tasks Apple

  Plug-ins Internet: ⓘ

  FlashPlayer - 10.6: 22.0.0.192 - SDK 10.9 (2016-06-23) [Support]

  QuickTime Plugin: 7.7.3 (2016-06-25)

  Flash Player: 22.0.0.192 - SDK 10.9 (2016-06-23) [Support]

  JavaAppletPlugin: 15.0.1 - 10.11 (2016-06-23) check the version of the SDK

  Default browser: 601 - SDK 10.11 (2016-06-25)

  3rd party preference panes: ⓘ

  Flash Player (2016-06-14) [Support]

  Time Machine: ⓘ

  Time Machine not configured!

  Top of page process CPU: ⓘ

  28% by mail

  11% WindowServer

  6% kernel_task

  2% hidd

  1% fontd

  Top of page process of memory: ⓘ

  1.65 GB Google Chrome Helper (13)

  563 MB kernel_task

  Mdworker (19) 360 MB

  221 MB Google Chrome

  Com.apple.WebKit.WebContent (2) 131 MB

  Virtual memory information: ⓘ

  3.77 GB of free RAM

  used 4.48 GB RAM (2,40 GB being cached)

  Used Swap 0 B

  Diagnostic information: ⓘ

  25 June 2016, 16:18:23 self test - passed

  24 June 2016, 18:55:37 ~/Library/Logs/DiagnosticReports/WebProcess_2016-06-24-185537_[redacted].crash

  com.apple.WebProcess - /System/Library/PrivateFrameworks/WebKit2.framework/WebProcess.app/Contents/Mac OS/process Web

  MacBook Pro, average vintage thrash?

  Your hard drive may be faulty, run disk utility > first aid your recovery volume or another hard drive under OS X on it and let us know what he reports.

  https://support.Apple.com/en-us/HT201639

  Edit: you 2009 isn't a recovery, run it from your installation CD original or other dislk with OS X on it.

• T500 P8600 (2.40 Ghz) Core speed problems - works only in 1, 6 GHz (6 x multiplier)?

  Hello

  I'm new here and I hope you can help!

  System specs

  Lenovo T500 (2081-CTO)

  CPU: Intel Mobile Core 2 Duo P8600 2.40 GHz

  RAM: 6 GB DDR3 PC3-8500 (2 GB + 4 GB Hynix halogen)

  BIOS Lenovo: 3.13 - 1.06 (March 2010)

  Operating systems: Windows 7, 64 bit

  Battery: Yes

  Power: 90W installed

  Power setting: maximum performance; Max CPU speed: more top [ThinkVantage Power Manager 3.12]

  Setting BIOS: Intel SpeedStep disabled; Everest EU 5.50 confirms: C1E & EIST are both: "supported, disabled.

  All Lenovo drivers are up to date *.

  ---

  Problem: Base speed is blocked at 1.6Ghz (multiplier x 6.0) and only fluctuates several Mhz from time to time. I think it should be fixed at 2.40 Ghz, I have disabled all the settings save CPU speed.

  Basic speed (1.60 Ghz) conforms to:

  -Everest Ultimate Edition 5.50

  -CPU - Z 64 bit 1.54

  -Intel Processor Identification Utility 4.22.20100224

  All of these are the @2 P9800. 40 Ghz is clocked at 1.6 Ghz or 1.59 Ghz.

  I ran the load/stress test, Super-Pi etc... and obsevered the basic speed - it never changes or is greater than 1.6 Ghz.

  Super Pi takes 31 seconds, where landmarks on a normal P8600 2.40 Ghz see the this should be done in 20 years.

  I have read several threads in these forums and tried all the things suggested:

  Example of Lenovo Forum Thread 1

  Example of Lenovo Forum Thread 2

  I even tried affecting performance Max CPU speed to "Adaptive", and yet, it does not go beyond 1.6 Ghz.

  Can anyone suggest other things I can do to make sure that it is not a problem? I thought I bought a 2.40 GHz, not a 1.6 Ghz.

  I have several more months remaining warranty, contact Lenovo to return my CPU? or is it a fault in Lenovo BIOS?

  Intel speed step must be enabled.  If you read what it says in the bios, if it is off then they processor will not let the State of the minimum speed.  This is the case on my T510.

  Give it a try.

• Satellite A80 129 DVD-RAM write speed problem

  Hi all!

  I have a problem. the thing is that I want to write in NERO 6 (last version purchased) a CD or DVD, but we will only write to me at slow speeds. In this laptop I MAST * a DVD-RAM UJ-830 s with DVD-R 8 x and 24 x CD - R write speed said.

  When I try to write on a CD it gives me only 16 x write speed, then where is x 24? It goes same for DVD, as I want to burn DVDs and it gives me only 2 x write speed.

  Please, do not put this fault on a CD or DVD, cause in my country there are limited suppliers of this type of media, so I won't change my media. They worked with my previous PC CD - RW fine, no speed problem.

  I want to know also if this is lack of DVD - RAM, where then find firmware for this burner?

  Thanks for your replies.

  BR, Kekec

  You should try to update nero, it might solve the problem.

  Also an update of the firmware can help, go to http://www.toshiba-europe.com/storage/index.asp?nav=HOM&page=HOM&frame=home

• W540 First Impressions, CPU speed question

  I received my W540 yesterday, and I am still migrating throughout my W520.

  First impressions:

  (1) keyboard - works fine, no light on the hats of the key is not a problem, caps lock appears on the screen

  (2) track Pad - works great after a few adjustments to my taste

  (3) display LCD - pending

  (4) LED function indication - I miss indicators for the HDD, WiFi & Bluetooth Radios

  (5) weight - My W520 weighs 6.2 lbs, W540 weighs 5.6 lb

  Question of the speed of the CPU:

  I ordered the CPU i7-4930MC, which is supposed to work at 3.9 GHz. After changing the settings of the Power System Manager for "TURBO MAXIMUM", the speed of the CPU is always only show 3.20 GHz on system Properies. How to 3.9 GHz?

  Yes, it will not work at 3.9 GHZ at idle - it goes "turbo boost" as high as 3.9 GHZ on a single-threaded workload that requires a lot more speed, but most of the time, it is going to be lower to save on battery power, cooling, etc.

• T510 CPU Perfonmance problem

  Hello, my Thinkpad T510 has i5 2.4 ghz. But it is still running at 1.2 ghz. (I try the method of intervention and others.) How can I reach real speed 2.4 or 2.4 + turbo thrust 2.9.And my experince point CPU Windows is 3.8.is this normal? Thanks for the responses...

  ilovethinkpad wrote:

  I do not work with battery.i open antivirus scan, two cpu test program and a movie hd as my cpu increase 1.2 to 1.5.After, I close the hd movie, new 1.2 ghz processor.

  Where the problem you have, ThinkPad Butterfly down without the battery installed. If you put your battery, and do the same test then the problem of the limitation of the CPU should disappear.

  Also, what adapter are you using? 65 or 90 watt?

• XPS 15 9550 CPU speed is as low as 0.75 ghz after manually installed windows 10 with all the drivers installed and BIOS updated

  I just bought this XPS 15 9550 in January, and I really appreciate it at first.

  However, one day, as pushed microsoft update to 10586 version of windows 10 and the machine will always fail to install the update, so I decided to download the image file and install it myself.

  The installation went smooth, but after a few days use, I found the computer is very slow during playback of videos and games and I came to find the speed of the CPU shows the label of performance in the Task Manager always will be 0.75 ghz and 0.78 ghz. He cannot go above that. I also found that the use of the CPU cannot exceed 30%.

  I've already updated my BIOS to 1.1.19, reinstall the system, a few times, choose the battery mode high performance, etc and this does not help.

  I also downloaded the power of intel and found gadget for my processor power consumers are still weak and the speed of the CPU is always not 0.80 ghz.

  In addition, I encountered the problem that after plugin the AC power, the speed of the CPU will fall to 0.39 ghz...

  Someone at - it an idea of what is happening here and how can I solve the problem? I'll really appreciate it. Thank you.

  I had my problem is solved. Follow these steps:

  1. download gadget power intel, you can search online for it.

  2. check the power of your CPU (package pw...) rate and open the videos and applications that will constantly consume the CPU power. See if the power is still weak.

  3. If the power is still weak, try to update your BIOS (download dell drivers and the new version should currently be 1.1.20) and see if things are getting better.

  4. If the power is still low, you must contact dell technical service to replace your hardware (my computer has replaced the northbridge, southbridge, I forgot, but after replacing, the CPU works fine)

  Note: If you run games using your discreet graphics card, such as starcraft II and you found that it's extremely slow, it is possible that your cpu is capped.

• (Redirected) Aurora R4 CPU Fan problem (command center)?

  My R4 for over a year (so the warranty is released). Just before warranty missed, fans began to everything going haywire. I contacted support and they have updated my BIOS and uninstalled/re-installed my remote control center. Which fixed most of the fans. Then I updated to windows 10, and everything was still fine. A month later, I had a system crash (wouldn't start upward) and took the PC to a local technician who found little bad ram was the only problem. Unfortunately, he drove my drivers back to before the bios and the command center have been updated (I don't know why). So, fans again started going crazy. I've updated the BIOS myself and that fixed some of the fans, however, the CPU fan is always crazy. If I run a program more complex than playing a video file, the CPU/system fan goes up to maximum speed (> 5000 RPM). In the control of the temperature, all times are stable around 27 to 28, so I don't know why the fan is too reactive. Also, I don't know why it lists the 0 system fan and the cpu fan at high speed, I've mentioned. Looking inside the machine, I can see that each fan is on, so no fan should be set to 0.

  I've heard talk of uninstall command center and reinstalling it would help, but I was not able to repeat myself that I can't find the dell control center download more. In the page drivers Aurora R4, it isn't appearing any more for download and I don't want to delete it until I have a way to download again. My command center is listed as 3.6.5.0. I have no way of knowing if this is the last version, I can't find any control center files or current information on alienware.com or dell.com anywhere. I doubt replacing the command center will solve the problem, but it is frustrating that I can't even try. Heck, even the link to the support site for "Alienware drivers and applications" leads to a dead link now (a page that won't load). If this expensive platform becomes a brick after all just a year, I don't see myself ever buy (or sell) products dell again.

  My system is an Aurora R4 with Intel (r) Core i7 - 4820 K Pro. Running on windows 10.

  Better in this position in the Alienware owners Club Forum, here:

  http://en.community.Dell.com/Owners-Club/Alienware/default.aspx

  Bev.

• Dell Latitude E7440 CPU speed capped after sleep

  My laptop Dell Latitude E7440 provided with Windows 8.1 at the time wherever I bought it. I did not notice this problem until I upgraded to Windows 10.

  Sometimes, when I put the laptop to sleep and resume at a later date, the speed of the CPU is limited to all about 0.78 GHz and switching to High Performance mode won't help. The computer becomes very slow and the only way to solve this reboot.

  I have the latest version of the BIOS installed (A15) and the other drivers are also updated.

  I've seen other threads saying that the problem is to use Dell Power companion but I do not use it. I have 2 power adapters that I use with this laptop, one of them is a Dell 90W Adapter. I'm not sure about the other that I don't have it right now, but an original came with the laptop.

  Any temporary/permanent fix for this? Thank you.

  I solved this problem. Downgrade BIOS A01 and updated step by step each single release - A01 > A02 > A03... > A15. Now, I'm on A15 BIOS and there is no problem with CPU after suspension. I7-4600u, W8.1 x 64.

• VMs will be running not because of a poor estimate of CPU speed

  I recently installed the drive on a Windows 7 PC.  I can create virtual machines, but when I try to start them, I get the error:

  ASSERT d:/build/ob/bora-894247/bora/vmcore/vmx/main/timeTracker_user.c:232 bugNr = 148722

  followed by:

  Power error: cannot find a valid peers to connect to.

  During my research, I found 1227 KB which deals with this issue and recommend the insertion of three lines in the config.ini file.  In my config.ini file I've specified these values:

  host.cpukHz = "1900000".
  host.noTSC = 'TRUE '.
  ptsc.noTSC = 'TRUE '.

  I tried with just host.cpukHz setting at first, then added the other after that didn't work.  Also, I turned on sync time with host on all computers three virtual I created.  None of these things helped.

  I also found this post that refers to this problem being attributed to an incorrect estimate of the speed of the CPU.  I checked this on my system, and according to the host.maxKHzestimate.value registry value, my processor is estimated at 40,04 GHz.  (No, this isn't typo.)  Not coincidentally, I'm sure, the system in Windows screen shows the same incorrect reading.  I deleted these registry values several times and restarted the computer (and the player), but the estimate is always re-created to 40,04 GHz.

  The processor in this system is an Intel Core 2 Quad Q9400 @ 2 .66GHz, but I actually have underclocked to 1.9 GHz.  CPU - Z recognizes the speed correctly ~1.9GHz.  I have no idea whence the estimate of 40GHz.

  Just to be sure, this wasn't a problem with the virtual machines created on this system, I tried to copy a machine virtual work known from another system, but I get the same errors.

  It is a Windows 7 freshly installed PC - Player was one of the first pieces of software that I have loaded.

  Does anyone have any ideas on how I could get this thing working?

  It looks like a problem of security policy.  To apply the configuration options that you have added to the config.ini file, the user account must have the right to SeIncreaseWorkingSetPrivilege security.  Normally, this right is granted to all accounts default user.  If you are unable to grant this right to the user account for any reason, you should be able to set the configuration options in C:\Users\USERNAME\AppData\Roaming\VMware\config.ini instead.

• Satellite pro M10: CPU cooler problems

  Hello
  I am using a Satellite pro M10 1.5 G.
  The cooler cpu or fan, makes a strange noise. It seems that some module between the wheels of a bike. It's very annoying. The pc is not so quiet as it was before.

  What can I do?

  Hello

  It sounds like there is something caught in the cooling that is contagious fans the fan blades. Visually check the fans through the aspiration air grills to see if you can see what it is.

  Unfortunately access to all fans will involve some disassembly so I would try to suck debris on the grids of aspiration of fan with a vacuum cleaner.

  If the problem persists, it may be necessary to take the unit to a Service Agent authorized to check/replace cooling fans.

  HTH

• Portege M400 - CPU cooling problem

  Last year, when I had used my Portege M400 for 2 years, he started the deadlock occasionally. Sometimes [I couldn't even start it | http://www.youtube.com/watch?v=RjNa8-c2Aro]. With cut and try the method I found the problem. The Spring wire which clasps the CPU radiator, it was with not enough force:
  http://Zorko.ru/assets/files/531/531/170720102581.jpg
  http://Zorko.ru/assets/files/534/534/170720102589.jpg

  The problem was solvable by Berry to the claws spring begins to apply more force hugging the radiator of CPU:
  http://Zorko.ru/assets/files/535/535/170720102591.jpg

  Apply a new layer of thermal grease has been useful as well:
  http://Zorko.ru/assets/files/533/533/170720102585.jpg

  However, the solution works for only a few weeks. And then (especially if it's hot outside) the story begins again.

  Any suggestions how to solve the problem once and for all? Thank you.

  Hi Greendrake,

  It s really great that you are interested in your Portege M400 and you can remove it. It of really not easy and so this cannot be the people with a lot of experience.

  Anyway, as you know here our forum user s only. This means that you can speak with normal people like you and me. I would recommend therefore to contact a service provider authorized in your country. Maybe the guys know this problem or something else or you need a thermal grease special because not all compatible thermal greases all cooling.

  By the way: on the Toshiba site you can find a list of all service providers.

  I hope it helps. :)

• Low-speed satellite Pro U400-142 - Wireless-N speed problems-

  Hi guys...

  I ve just bought a laptop Toshiba Satellite Pro U400-142...
  I have a belkin N1 Wireless cable router...
  I was really happy that I could get the speed up to 300 Mbps... with this laptop and the router...

  I am very very disappointed that he is only showing 65Mbps... My laptop supports Wireless N such that it has a wifi Intel 5100 card inside...
  Why show a low speed?

  I m in the same room as the wireless router if the signal is excellent...
  I've tweaked on with the settings in the network adapter settings...
  I got it to 130Mbps... for about 10 seconds before it dropped back down to 65Mbps...

  Can someone tell me what is the problem?
  I need to change some settings on my N1 router or what?
  This was one of the main reasons why I bought this laptop.

  concerning

  You have reason seems the wireless network adapter supports the Draft N
  But are you sure that you are using Draft N?

  Is it enabled in the Device Manager-> properties-> Advanced tab card WLan?

  At 802.11 N selected in your router settings?
  Update you the BIOS and WLan card driver?

• Satellite L755-128 - CPU compatibility problem

  Hello dear colleagues,

  As the title says, I have a Toshiba Satellite L755-128 code PSK30E. He has a 2nd generation processor Intel i5 - 2410M.

  Laptop that works fine and everything, but I recently got a nice agreement on a more recent laptop with lower overall record, but a better processor. It's an and Latitude E5530, with a 3rd gen Intel i5 - 3230M.

  Go to the Intel website, I saw that basically two processors have the same TDP of 35W and the same size of package, both run on HT and have two hearts, the only difference is that architecture from 32nm to 22 nm and the frequency is higher.

  In addition, 2nd generation supports 1066/1333 MHz memory, and 3rd generation supports 1333/1600 MHz. My memory is 1333.

  Of course, as you may have guessed, I intend to swap the processors between the two laptops. Updated the BIOS on both of them, then replace the processors, re-assembled and starts, surprise: The recognized enjoy the old version of i5, ran fine and all, but Toshiba does not.

  He just opened when I pressed the button, but the screen remains black. Then I pressed the button again, it also normally stop. (I repeat, already updated BIOS update, as someone recommended). I disassembled again the Satellite, check if everything is in place, and second starting time still the same.

  Then, I am annoyed and exchanged in return on their original laptop processors. And both of them work fine.

  So if someone has encountered this problem could you please indicate if you managed to sort it out?
  What seems to be the problem, not the Satellite Map mother does'n not support 3rd generation Intel?

  If so, why? Or if that would work, what should I do?

  Thank you in advance!

  Hello

  I put t know any laptop manufacturer that officially would fund an upgrade of the CPU.
  For the most current updates on laptops are your own decision and no one could provide you with a confirmation that your laptop with new processor work or run correctly.

  Indeed many people try to update processors, and in many cases, it also works on Toshiba laptops.

  But there are a few important notes:

  (1) you must ensure that the chipset of the motherboard would support new CPU. In case it doesn't, you can not use

  (2) even if the new processor would be supported by the chipset, it is still pending regarding BIOS support. BIOS is changed for each series laptop and it is possible that some processors would not fully compatible or supported by the BIOS.

  As you can see, the upgrade of the CPU is not very easy and it s no matter that a laptop computer that was equipped with the same processor the L755 takes in charge the other CPU there are many more factors that could affect these updates.