XP does not start after update BIOS on Satellite L

Similar Questions

• Photoshop does not start after update CC 2015 and I can't install new applications... What can I do?

  Photoshop does not start after update CC 2015 and I can't install new applications... What can I do?

  If you leave CC 2015 Installer remove older versions of Photoshop you can re - install older versions using the creative Cloud Desktop application or through direct downloads, you can install.

  Direct download links of Adobe CC 2014: 2014 creative cloud release | ProDesignTools

  Download new Adobe CC trials: direct links (no Assistant Manager) | ProDesignTools

  Download Creative Suite 6 applications

• HP DV7-7259nr does not start after the BIOS update

  Hello

  I have a problem with my HP DV7-7259nr laptop, WIN8 running: it does not start after tune recommended to update BIOS and drivers.

  It downloaded all the drivers and started installing at one time, he asked for a reboot, click OK and the BIOS update has begun to load. The process ended successfully and after the reboot that my laptop wouldn't start; everything is black and the cooler is runing.

  I tried:

  -battery disconnected and power - button Power - plugged power again-> NOTHING

  -Windows key + B + Power button--> nothing

  Please help as this is the laptop I use daily in my work.

  Thank you

  If you install the electro mechanical original hard drive in it starts?

  If it has been delivered with a SSD?

  The specifications indicate that an electromechanical drive was part of the specification.

  

  This is where lies the UEFI environment. It is actually on the hard drive.

• Tecra 8000 does not start after the BIOS update

  From one day to the other does not start my Tecra 8000 (400 MHz/256 MB BIOS 9.30 for years). After start-up, the disc starts to turn, but the screen including the backlight remains completely black, without red logo TOSHIBA BIOS is not accessible.

  I got a new mainboard on stock, so I replaced it, and it worked. Unfortunately now my WLAN card now did not work properly. I tried several settings of the BIOS with no results, so I decided to do an update of the BIOS from 7.50 to 9: 30. After the upgrade, I get the message "ROM WRITE successful, utility completed. LEADER BIOS: Tecra8000 v 9,30 ". Because what either kept silent, I pressed the power button to restart and heard a long and many short beeps (endless). I could interrupt what pressing the powerbutton for 5s.

  After turning on again I have the same problem as described in the first line :-( I can't get into the BIOS, but I can again update (with pressed F12). Once again these beeps.

  What to do with these beeps after average BIOS update? I replaced the MoBo connector LED with pension. Processor, memory, keyboard and HD has remained the same. So, before I start disassembling the machine, please notify, your help is very appreciated.

  Hello Joachim

  I'm not a technician and don t know what the beeps but I am afraid that the BIOS chip is damaged. Because of this, the unit is completely dead. Sorry, but I really don t believe you can do anything. Maybe the new motherboard again :(

• A series of satellite does not start after the BIOS update

  After update bios with the downloaded utility my laptop does not start.
  Do you have this case covered by the warranty?

  I'm not sure if this would be covered by the warranty. You must contact the ASP in your country for details, but I assume that it s not covered.

  PS: Did you try this work around:
  -remove the battery, disconnect the adapter
  -wait ~ 40 min
  -connect the two devices again and try to turn on the laptop

• HP compaq 6510 b does not start after the BIOS update

  Hello

  When I turn on my laptop HP compaq 6510 b it DISPLAYS this message: your bios has not finished updating 6510b.after flashing the bios of the laptop does not start .it displays the same message (your bios did not complete the 6510 b update) and turns off. I cannot access the bios by pressing F10.the bios version was F16 and flash by F20 .will help thank you very much.

  I'll have to return a verdict of laptop motherboard bricked due to a failure of the BIOS upgrade. Sorry, but it happens.

  This means that this would require the replacement of the BIOS chip to make it work again.

• every night does not start after update

  Win 7 x 64
  42.0A1 every night
  Does not start in normal or safe mode after update. Tried - safe-mode and shift method.

  Last crash Crash ID ID: bp-2bd17147-3a07-458b-9c89-4a37e2150718 doesn't mean anything to me.

  I can't put up with these accidents more. I worked on it for over 2 hours today.

  Please, someone help quickly.

  Hi rob86, every night is an early pre-release version where instabilities are expected. If you want to have a more stable environment, please use another channel: https://www.mozilla.org/firefox/channel/#firefox

• NB200 does not start after the bios - screen black screen with blinking cursor

  Hello

  I was using the laptop as usual when I think there may have been a virus activity - reason I say that is that my anti-virus closed unexpectedly. I couldn't restart programs files.

  I restarted the laptop.

  After the bios menu will I get a blank screen with a blinking cursor - windows does not start.

  I did the following:
  (1) create a USB bootable with Recovery Console window XP - boot with this i can see three drives C:, D: as SDA? I can see the content of these disks, so it seems that my HD works. I ran a fixmbr and fixboot, but this has not solved the problem.
  (2) create a Kaspersky bootable USB virus scan - ran it without problem - he found a few question (not on the disk boot sector) I've fixed.

  An option was to copy files from the laptop and then start it in recovery mode - so Itried to run the phone into recovery mode hold down the 0 key at startup - the bottom of the screen then displays * HDD Recovery mode * and nothing happens.

  Any help - other options would be greatly appreciated.

  My 1 year of that guarantee has expired a few months back so can't send in for repair.

  Thank you

  Hello

  I doubt that it is a virus.
  Seems the file system is damaged on the HARD drive and this is the reason why the laptop does not start until it could also be a partition of HARD disk malfunction.

  Try this; Turn on the unit, press F8, and then check if you have the laptop repair.
  If this is not possible, then you will need to reinstall new OS.

  Here you can order a recovery disc:
  http://backupmedia.Toshiba.EU/landing.aspx
  Of course you will need an external USB CD/DVD drive

• computer does not start after update

  what computer starts without updates without problems.
  When the computer starts after a update it does not start and goes into the Startup Repair. after repair, I check: diagnosis and repair of the details:
  the root cause of watch - start criticalfile c:\ntoskrnl.exe is corrupt. with a 0xa error code

  can I fix it myself?

  horticulturist,
  Did you run the System File Checker?  If so, what were the results?  If you haven't done so already, you will need to run (sfc/scannow) so that it can check your system files for all questions.  Also this happens after any update is installed, or only the current links that are pending?  I suggest try to install an update at a time and see if you are able to get the updates installed or not.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Vista 64 does not start after the bios screen. Can not boot from the recovery cd or help

  Last night a MS pushed a windows update and my pc restarted automatically.  But it does not actually restart.

  The PC goes through the bios tests, passes and then crashes and does not start in Vista.

  I can't start at all, including safe mode.

  I can't the system recovery option in HP bios to load.  Can I only use my Vista64 system recovery bootable cd or actually start.

  First of all, I thought it was a HARD drive problem, but tests of the bios disk hard that all spend, even the 2 hours 'SMART' test that he was running.

  Help

  Hello

  What happens when you try to boot from the recovery CD? You receive messages or error codes?

  You can check if the boot in the BIOS settings priority is configured to boot to CD\DVD.

  NOTE: Change (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  For more information, you can consult the following article:

  BIOS: Frequently asked questions

  If you still experience the problem, you may need to contact HP for assistance.

  HP support

  Hope this information is useful.

• ColdFusion service does not start after update 12

  Hello

  I'm running CF10 on Windows 2008 R2 server.

  Today I applied the update patch 12 to my server Coldfusion10 installation and now 10 Coldfusion Application Server does not start.

  After installation I ran configuration of the Web server, such as recommended. Now, when I start from server manager concole I get an error Windows cannot start Coldfusion 10 application server...

  When I start the Coldfusion Administrator I get page with:

  Service temporary unavailable!

  The server is temporarily unable to process your request due to downtime or maintenance capacity problems. Please try again later.

  Jakarta/ISAPI/isapi_redirector/1.2.32)

  I downloaded the patch directly from this http://helpx.adobe.com/coldfusion/kb/coldfusion-10-update-12.html page after update running administrator and download failed several times.

  I restarted the server box, but it did not help.

  Any ideas?

  Thank you

  CF10 reinstalled, now works

• HP 15-af131dx: computer HP laptop does not start after update AMD video drivers

  Hello, my laptop HP 15-af131dx would not start after I have updated to the latest video drivers from AMD. After update, my phone was really slow, so I decided to restart it. When I tried to start up, most of the time, she would get to the windows logo with the symbol of loading under it and crashed. Sometimes arise windows recovery, but using it would only make it appear an error message. After a few tries, I was able to boot into windows safe mode and restore my video drivers. This corrects the problem, but I would like to know why this is happening and if the update of my video drivers by importing.

  . Hi @HPlaptop5,
  
  I hope you enjoy your visit to the HP's Support Forums. I understand that you have a problem with video drivers. I'll be happy to help you.

  You can also find your drivers to support.hp.com.

  The latest HP driver released was Version 15.201.1101.0 Rev.A release: January 29, 2016.

  I do not update my driver unless I have a video problem.

  Please keep me informed of the progress of things.

  If you need help, let me know and I will gladly make all that I can to help you.

  Please let me know if that solves the problem by marking this post as "accept as a Solution.
  To simply say thank you, click the Thumbs up below!

  Thank you.

• Satellite Pro A200 PSAE4E does not start after upgrading BIOS XP

  Hi, I need help!

  computer laptop, tested just got everything ok with Vista business and everything works fine.
  Now, I have a requirement to test a laptop duel boot XP build and follow the attached instructions to change the BIOS so that I can install XP.

  Restarted the laptop with the bios disk selected bios XP and everything seems ok.
  The phone rings, I answer. When I finished, I think back to the laptop and screen is white.
  Leave it for 20 minutes still white. Stop the laptop and reboot, no tosh start screen, nothing.

  Now does not start, so what do I do to get this thing working again?

  Hey Buddy...

  This looks very bad! :(il ressemble pas à quelque chose a mal tourné àle cours de la procédure de mise à jour dele de BIOS, et donc l'ordinateur portable ne peut pas démarrer correctement.)

  I hope that the ROM module must be flashed again.

  This can be done only by an authorized service provider.
  I see no other solution for contact ASP in your country and ask for help and handling.

  Good luck and best regards

• SW2 does not start after update

  Hope someone can help.

  I've updated my SW2 yesterday and everything seemed fine, but now when it connected to my phone the SW2 kept rebooting.

  I tried to turn it off, and now it does not start at all I just get 5 vertical bars on the screen. She is completely loaded and not recognized by the PC.

  I tried pressing the power button for at least 30 seconds - the SW2 turns but will not start when turned back on. I tried to relight both plugged and unplugged the computer with my phone is totally turned off so no possibility of what he's trying to connect to my phone while commissioning.

  Finally, everything seems to be ok atm.

  Steps to solve were

  -Disable the twinning of the phone (this allows the watch start)

  -Reset the settings of the watch watch

  -Uninstall sw2 connect app on phone

  -Restart the phone

  -Re-install smartwatch 2 SW2 on play store

  -Reconnect phone watch

  If you are still having problems uninstalling repeat but uninstall the applications that connect to the watch as well as the removal of the sw2 connect app

• Lightroom 5.5 CC does not start after update

  Hello

  I used the creative cloud to download all new 2014 updates LR 5 was an update.  All downloads and installations reported successfully.  I opened PS CC 2014 and he launched and loaded correctly.  However, LR 5 launches the screen flash for about 2 seconds, but does not start.  I try to go to Cloud creative to download and reinstall, but LR 5 as it is installed and won't let me not re - download and install.  I also tried to pass on the new adobe creative cloud site and tried to download it, but it is comes up with a message that the link requires a launch program... have no idea what happened to the program.  Totally baffled with this new cloud set up!  Your help is greatly appreciated.

  Dennis

  I have the subscription of photography - both LR and Psalm

  I contacted just supported and the mast has been resolved. Here's what we did:

  Remove the LR5 of the Applications (Macbook Pro) folder application

  Download and install the new LR5.5 software via the web on adobe.com

  Start LR (it worked)

  Sign out of Adobe CC app

  Connect to Adobe CC app and he finds LR and scored is installed.