Ianyone of other ridiculous notice how the questions are about the certification exams?

Similar Questions

• Error occurred during the certification exam

  Hello
  Please can someone give me some advice about my problem.
  
  In a Pearson view test center, I encountered an error during my certification exam due to problem of connectivity to the test center.
  After that I was not able to continue my review, administrator at the testing center didn't know how to handle this.
  They tried to restart the computer, in order to continue the trial on another computer, but nothing helps.
  
  Test center has reported an incident to Pearson view report, promising that a person view will contact me within the next 48 hours, until now spent 40 hours, but no one has contacted me yet. They do not want me to send the email to view, saying that it is a confidential email, they wrote.
  
  Because of this I can't do anything on my own because I don't have access to the e-mail of reported problem and I can't refer to him directly to the view.
  
  A person at a test center called me yesterday to inform me that it is confirmed that a technical error has occurred during my review but they offer no solution, I just have to wait to view contact me.
  
  I have another problem because my coupon expires for a few days and in those days, because of my business-to-business commitments and obligations I'm not able to write another test. I can only do so after expiry of the certification day.
  
  At the testing center, they say that they are not responsible for the error, and that I'll be able to take another test with the coupon expired if and only if the view which will allow. As they say, all I can do now is to wait for a miracle to happen. :(
  
  Don't you think that the test center is responsible for the error? And I have no right to request a new voucher if view in some cases does not allow me to take the test again with the same good again.
  
  I'm really desperate, I can't believe that a test center is not responsible for the error that happened in their establishment.
  Is this error, the liability of Pearson view or Test center of responsibility?
  
  I read on the forums that I should apply for refund/recovery orders... but I should directly view or Testing Center where the error occurred?
  
  Please give me advice on how I can handle it and what I can do to solve the problem.
  
  Thanks in advance.

  It seems that this has been solved for you and your review has been postponed. Is this correct?

  Thank you
  Brandye Barrington
  Certification Forum Moderator

• Interested in the ACE exam

  Hello.

  I am interested in taking the Certification exam after effects CC.

  Adobe's Web site suggests that there is only a reexam for this version:

  Adobe Certification exams. Adobe training & certification

  But, the person site VIEW shows clearly there is such a test. I asked and got this response:

  "

  Dear Ofek

  Please contact Pearson VIEW.

  Please note that test a 9-0-360 is available for booking in the system.  If you need to advise certification or recertification counselor on this review, you will need to contact adobe directly for advice.  Pearson VIEW can only confirm that the review for a 9-0-360 is available in the system.

  If you have any other questions, feel free to contact me.

  Kind regards

  Guillermo Oliva Customer Service specialist
  After-sales service
  Pearson VIEW

  "

  
  

  I'm confused.
  

  Mystery solved. Test exists: Twitter / AdobeCertExpert: Hi @ofekfx! The After Effects... AS

• Two questions: 1. What are the procedures to superimpose an image on top of the other? 2. how resize you, make adjustments, adjust transparency overlay image etc? I use a MAC with Photoshop Lightroom.

  Two questions: 1. What are the procedures to superimpose an image on top of the other? 2. how resize you, make adjustments, adjust transparency overlay image etc? I use a MAC with Photoshop Lightroom.

  HI Timp,

  Sorry, but that kind of image manipulation is not for the purpose of Lightroom and more oriented toward Photoshop and retouching of composition of similar images.

  Please check the links to know the image overlay in Photoshop below:

  Mix photos with apply Image in Photoshop

  http://www.photoshopessentials.com/photo-effects/blend-photos/

  The superimposition of Images in Adobe Photoshop | DIY digital composition

  For more good result to check the google search.

  Google search: Google

  Concerning

  Sarika

• "Read" notice on the application of instant messaging, a question?

  IM Apple allows you to send a notice as a snapshot message was 'delivered '. I understand what it means. Recently, the opinion has changed to 'read '. I do not understand how the IM application knows whether or not the message has been read. I usually leave my IM window open when I use this app. It is therefore impossible to know whether or not I've read a message. I guess that more than others to do this. So that the 'read' notice means?

  Messages has an option in the preferences/Messages/accounts, which allows the recipient to send read receipts.

• How the GPU edition effects and export? ASUS GTX760-DC2OC-2GD5 or ASUS GTX770-DC2OC-2GD5? I will notice significant performance improvements?

  Hello!

  I improve my system for best performance and I have a few questions about the GPU (graphics card unit).

  I bought an ASUS GTX760-DC2OC-2GD5 but may request to change for ASUS GTX770-DC2OC-2GD5 for more or less 50 euros more. If I leave the ASUS GTX770-DC2OC-2GD5 I also need to upgrade the PSU (Power supply unit) once it's more power demanding.

  In addition, the ASUS GTX770-DC2OC-2GD5 is the list of approved first adobe graphics cards while the is not ASUS GTX760-DC2OC-2GD5.

  My questions are:

  (1) how does the GPU does affect the editing process and the export process?

  (2) I noticed a big difference between the ASUS GTX760-DC2OC-2GD5 and the ASUS GTX770-DC2OC-2GD5?

  My system is not as powerful. Here are the specs:

  ASUS Essentio CG8250

  CPU Intel® Core™ i5-2300 (6 M Cache, 2.80 GHz) Processor Quad Core

  16 GB of RAM (4 x 4GB memory DDR3 1333 MHz)

  1 x 240 GB SSD for OS

  1 X SSD 120 GB for project media & cache

  Hard drives 7200 RPM for project storage and removable media.

  Windows 7 Ultimate 64 bit
  First CC

  Thank you in advance.

  A 760GTX would be more than enough for this system, which would not be able to push this card anyway.

  Eric

  ADK

• How to make a paper with some boxes to fill required for me to sign, and then some other boxes needed for the next person to sign. I want the boxes I've filled to be locked the next person.

  How to make a paper with some boxes to fill required for me to sign, and then some other boxes needed for the next person to sign. I want the boxes I've filled to be locked the next person.

  Hi johanb64152807,

  You can use eSign service, where you can send the document for signatures of several signatories, but the document will be sent to the following signatory after the earlier signed & it is not possible for him to make the changes.

  Documents KB for help: -.

  • Get started | Cloud of Document Adobe Tutorials
  • Quick Installation Guide | Services Adobe eSign
  • Send for electronic signature in eSign Adobe Document Cloud services | Adobe Acrobat DC tutorials
  • Send agreements and collecting signatures. eSign services
  • FREQUENTLY ASKED QUESTIONS | Services Adobe eSign

  Kind regards
  Nicos

• We use Flash Pro CC creating animations with legends and export to html 5.  We must translate the captions in other languages. How can we download translation of texts in our flash animations so we can use them in html5 using CreateJS?

  We use Flash Pro CC creating animations with legends and export to html 5.  We must translate the captions in other languages. How can we download translation of texts in our flash animations so we can use them in html5 using CreateJS?  I use the Flash on a Mac OSX 10.10.3

  Are you familiar with JavaScript?

  It does not completely answer your question, but the text displayed on the screen from any language (ActionScript/CreateJS / [insert the programming language]) generally all following the same path. Each language has a file stored in some form of key = value style, named through the language and the country of your choice, for example en_US.json

  Any language would allow the user to choose regional settings. The application would then grab the appropriate file and everywhere where the text is needed, the script must be using a (usually global or singleton) variable/service that can get the text of the requested key.

  for example if I wanted a user to have a confirmation of dialogue who said 'are you sure?"with buttons for 'Yes' and 'No', I would have (for me), an Englishman, USA base file en_US.json with these values, for example:

  en_US. JSON example:

  {

  'CONFIRM_YES_NO': ' are you sure?

  'YES': '' Yes. ''

  'NO': 'no '.

  }

  Then you use simply JS/AJAX to read this file. You analyze, or simply JSON decode in an object, or manually, depending on what suits your needs. When you want to display any text, you use the object (variable, maintenance, etc.) you have stored these values.

  for example calling to display function confirm dialogue:

  Nickname... but if you understand...

  and this comes from jQuery UI (see here)

  function confirmDialog() {}

  $(«#dialog-confirmer»).dialog({)

  Title: LocalizationObject ['CONFIRM_YES_NO'],

  buttons:]

  {

  text: LocalizationObject ["YES"],

  Click: function() {/ / do something for 'yes '.

  }

  {

  text: LocalizationObject ["NO"],

  Click: function() {/ / do something to the 'no '.

  }

  ]

  });

  }

  Please consider loosely. 'LocalizationObject' is a variable object or service that returns the appropriate text for the key that you provide. In this case, he provided the key 'CONFIRM_YES_NO', 'YES' and 'NO', which must be on the right answer for this key, localized.

  Again, this is not a manual on how to do it via Flash Pro but it's the general conceptual way you could do it in any language. There are a variety of other ways to do it, but it's a very simple way, as long as you keep your key names at least wake up verbose. A key name such as LocalizationObject ["ABC123"] is not really tell you what the key can be referred. Also nest them contributes greatly, as LocalizationObject ["UI'] ['DIALOGUES'] ['CONFIRM'] ['YES_NO'] = ' are you sure? It just shows I nested the title of the dialog within the user interface, because it is the text that appears in the user interface rather than content. Then inside dialog boxes that may contain a variety of different dialog boxes. Then inside her CONFIRM type of dialogue. Finally, the type is a dialogue YES_NO type (as opposed to OK_CANCEL or JUST_OK, etc.). Whole set makes it easy to understand what the text of reading: UI YES_NO confirm DIALOG boxes.

  I hope that from here you can see that you need to review everywhere you display text on the screen and centralize it in a sort of object (function or variable) of your choice. You must store the external language files to prevent unnecessarily load the other languages as well as an easy to modify Setup.

  The rest is just using basic JavaScript.

  Just be ready for the most difficult challenge. At least for me. The size of the text in several languages is very different, and in some cases requires the loading of special fonts. This can make layout in a very difficult dynamic environment. Always thinking all text how big or small can be in any particular and plan field on this size more and shrink so that to handle this situation correctly.

• an alphabet by typing in a cell gives drop down suggestions from previous hits on the same column. But how the drop down to choose the suggestions of the other columns and other sheets.

  an alphabet by typing in a cell gives drop down suggestions from previous hits on the same column. But how the drop down to choose the suggestions of the other columns and other sheets.

  Hi mdsavol,

  Your observations are accurate. The 'suggestions' are previous entries in the same column that correspond to what has been entered so far in the active cell. The only direct user control is to activate the function turn on or off in numbers preferences > general.

  There are other ways to include or exclude items of suggestions:

  • To remove typos in the suggestions list, the user must correct the typos in the cell above the active cell. If they are more in the list, they won't be presented as suggestions.
  • To include selections added to the list, the user must enter these suggestions in the individual cells above the active cell and column where they are wanted as suggestions.

  There was a request here a while there is a list of suggestion 'live' similar to those of some websites, which offers a descending list of possible entries as a type in an input box.

  The only way I see to reach a solution similar to what you have asked is to use as many lines at the top of the non-en-tete of the table section to list the items likely to repeat in your table, and then hide the lines. You'll need a list for each column where you want to use this feature with a list previously planted. Existing items will then require a likely hit up to three, then a click to choose from a list small enough to enter a value into a cell. News he will need to enter in full the first time, but after that it will be put on the list and answer the same thing as the terms preseeded.

  While your setting upward (or decide not to do), consider going on the menu of number (in numbers), choosing to provide feedback from numbers and writing a feature in Apple request. Describe what you want. Explain how he could help the average user numbers, and then hope for the best.

  Kind regards

  Barry

• How the other drive app option to calculate calories? I did 45 minutes yoga with him and he showed the 260 callus which is high of 45 mins of yoga session.

  How the other drive app option to calculate calories? I did 45 minutes yoga with him and he showed the 260 callus which is high of 45 mins of yoga session.

  ISuspect that is not correct.

  Hello

  Saving workouts through the app to drive using others as the type of activity, active calories are estimated at a rate equivalent to a brisk walk or based on the data recorded by the heart rate sensor, according to what is higher.

  The following steps can help to improve the accuracy of the estimates made by your watch:

  • Estimates for calories and other results depend, in part, your personal information. To verify that it is accurate:
    • On your iPhone, in the application of the watch, go to: My Watch (tab) > health > Edit (top-right).
  • While training, to optimize the performance of the heart rate sensor (data from which is used when estimating calories), make sure you wear your watch fits on top of your wrist. Apple suggests that consider you the clamping Strip before starting a workout and it loosen again thereafter.
    • Note that the heart rate sensor is likely to give better results for the workouts that involve rhythmic (such as running) rather than the irregular movements.
  • Calibrate your watch can improve the accuracy of various estimates related to the activity, including estimates of calorie. To calibrate your watch, follow the instructions in the link below support article. You can reset your calibration data and start the process:
    • On your iPhone, in the application of the watch, go to: Watch My > privacy > Motion & Fitness > tap reset Calibration data.

  More information:

  Use of the workout on your Apple Watch - Apple Support

  Your heart rate. What it means, and where on Apple Watch you will find. -Apple Support

  Calibrate your Apple Watch for better accuracy of training and activity - Apple Support

• I deleted all of my hard drive and there always 219 GB of the 'other' listed.  How can I find on that fits all that space?

  Old MacBook Pro.  250 GB drive is full.  I have deleted or moved the docs, photo and music on an external drive and in ' on the Mac - memory "it says I 219 GB of"other ".  How can I know what 'other' is and delete the useless/applications/etc?

  First of all understand what OTHER actually represents

  https://support.Apple.com/en-us/HT202867

  If it seems an excessive amount on the screen "about this Mac", often a re-indexing of Spotlight will correct it:

  https://support.Apple.com/en-us/HT201716

  (there is a bug in the program that generates this view)

  You could also download OmniDiskSweeper and Grand Perspective (both free) Internet and open them. They will show all your files and respective sizes. Transfer to a HARD drive external files don't want on your Mac or remove them.

  Don't forget to empty the trash. Then only the space is allocated additional data.

  Ciao.

• I want to create a 2 cells in demand for numbers, the 1st cell is a dropdown menu with items of text, when choosing an item, that it would be represented by a numeric value in the other cell. How can I do?

  I want to create a 2 cells in demand for numbers, the 1st cell is a dropdown menu with items of text, when choosing an item, that it would be represented by a numeric value in the other cell. How can I do?

  You can use vlookup() like this:

  (1) crate a table like this:

  the first line is a heading row

  the first column contains the same list of items in the context menu

  the second column contains the corresponding values

  name of the table 'value '.

  

  In another table (where the pop-up menu), you can use the table of choice of 'Value' like this:

  

  create a drop-down list in cell B1

  Select cell C1 and type (or copy and paste) the formula:

  = VLOOKUP (B1, Value::A:B, 2, 0)

  short hand for this is:

  C1 = VLOOKUP (B1, Value::A:B, 2, 0)

  now change the pop-up to display the value in the change of cell C1

• How can I farm Metro application other than by using the Task Manager?

  How can I farm Metro application other than by using the Task Manager? If there is no way, please add a close button, Microsoft.

  Hello

  ·          What version of the operating system is running on your computer?

  Alternatively, press ALT + F4 to close the application.

• I started to load my windows XP - my computer froze. Disconnected, reloaded. spend on computer, now have a fully operational XP / other is glued on the product key-how can I remove it?

  I started to load my windows XP - my computer frooze. Disconnected and recharged. However when I turn on my computer, that I now have a fully operational XP and the other is stuck on the product key-how can I remove it?

  I can't find my product code XP as well.

  Can someone help me remove the second. I tried for months now. Make my computer so slow.

  Thank you in advace for anyone who is able to give me advice

  Hello

  · Multiboot system are you referring?

  · Think you that other operating systems listed in the startup screen?

  You can check the link: how to manually start the deletion process to remove Windows XP: http://support.microsoft.com/kb/312569

• the police or the 'stuff' on my screen go beyond passing on my other computer. How can I reduce the size of what is seen on the screen

  Basically, my screen is bigger than on my other computer.

  How the elements on the smaller screen. It's like looking through a magnifying glass.

  What are the resolutions of the screens, if they have the same then the best resolutions, that you can do, is make the sizes of icon and smaller through fonts

  Right click > properties > appearance > advanced and scroll down and make it smaller, and then click 'apply '.

  If the resolutions are different, make the resolution on the bigger screen, higher and higher until you are comfortable, or peak.