IBM BTI for LabView and TestStand programs Source code control.
Asked me to use our new tool of control of source IBM BTI to control LabView scripts. Anyone used this tool?
Hey general-D,.
Have a look here if you have not already.
https://decibel.NI.com/content/message/53855
I asked a lot of my colleagues, but we did not use this specific software/Protocol in all applications. A lot of people me looked puzzled, never heard about before.
Tags: NI Software
Similar Questions
-
Were there any type of methodology to take a labview executable and code source screws used to create the VI extrapolating?
If the diagrams were not removed during the build (by default, they are deleted).
-
Delete a source code control RoboHelp project, without opening HR
Hello
I use HR 11 and Visual Studio source code control.
I need to take an archived version of my HR project and open it to the changes that are not in the current project.
When I unpack my archive, it automatically links to the source code control and downloads the latest version of the project.
It supersedes the current source code control project and even change the mapping of the source control path must match the project archives.
So what I need to be able to do, is open my archives project without source code control interface. Is there a file I can edit linking the project to source code control? I can't even open the project in HR because it distracts the mapping of source control.
Thank you.
It is fairly easy to do. See Rick's excellent post: October 2004 - ban witchcraft do not forget to remove the CPD file however.
Kind regards
Willam
-
LabVIEW and TestStand compatibility chart
Hello
There are various compatibility tables LabVIEW NOR as this Web site but it seems not to be a LabVIEW and TestStand compatibility chart.
I think I found my answers, but I had to get through all the Notes version of TestStand to get.
Hi Ray,
The lists of the political of TestStand page on the different version of TestStand compatibility with:
- Operating systems
- LabVIEW
- LabWindows/CVI
(In addition to information about the cycle of life and support policy)
Specifically, here's a screenshot of LabVIEW support:
With each new version of TestStand, we will update the policy life cycle page, so you can always go for information.
-
I can't use the microphone in my headset for Skype and recording programs
Hello...
I can't use my microphone in my headset for Skype and recording programs.
Can someone pls help? I tried the camera on my phone, it works perfectly.
I use v8.00.03 (T) Edition Premiun.Post edited by: worldliner
Sorry mate but could you be more specific?
> I use v8.00.03 (T) Edition Premiun.
What does that mean? Toshiba BT stack or what?There is a new BT stack:
http://APS2.toshiba-tro.de/Bluetooth/?page=download-Toshiba
Its v8.00.12 -
You can help I was looking for a list of program which are controlled by Microsoft?
Can help you I was looking for a list of program which are controlled by microsoft that run from the microsoft flag and R keys pressed together key. many of then are 8.8.8.8 Ping-t and another is appwiz.cpl
Windows key + R generates the Run dialog box that allows Windows to run almost any command you can find, the 'list' would be huge.
In this box, you can type some commands, web addresses, UNC, paths management console scripts and so on. All programs on the computer may be open in the box run, provided that the full path is included or it is in one of the list of path variables.
-
Should I Robohelp Server or Source code control? and installation of HR
So, I always compare products of creation and try to filter requirements.
I've been reading more about HR and have met HR server and source control and ask yourself exactly if they are needed.
I'm the only writer in society, probably helping web publishing or outputs html for use online help via our web application.
Is it necessary to implement a server control or source, I can see that server gives me reporting capacity and statistical reports, neither of which I really need. Is there something else on the HR server that would be beneficial?
In addition, source code control, it is more necessary when there are multiple writers accessing the same content at the same time that problems arise? Fix?
Also, is it difficult or time-consuming is the installation process of HR on a single machine. It is a simple setup, or will I need to install database server or anything that might require IT to the team to get involved?
Thanks for your help.
Nick
Hi Nick.
You're almost on the spot. RoboHelp Server is mainly necessary only if you want the features of additional reports. There are other minor differences between RoboHelp and RoboHelp Server but that's the main thing. RoboSource Control is an application for source safe and saved files and is designed for an environment of several author. It adds a layer of complexity to a single authoring environment, even if you can still use it if you wish. Personally I would ensure you have your source on a local disk (a key to RoboHelp requirement) and the backup on a network drive.
Installing RoboHelp is painless. It's like any other application by using a wizard to guide. He has several options that you can choose, which one is to install the RoboSourceControl client.
Click here to learn more about the difference between RoboHelp Server and RoboSourceControl.
-
Original title: "Could not open INSTALL. JOURNAL ".
We get this message when I try to uninstall Yahoo messenger and other programs of the control panel.
Hi thomaskirchoff,
(1) how long have you been faced with this problem?
(2) what is the complete error message you receive?
Method 1: You can see the steps in the Yahoo link below
Method 2:
If a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected. Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:
How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
http://support.Microsoft.com/kb/929833Method 3: Put the computer to boot and then check if the problem persists
Follow step 1 in the link below,
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7Important:
n ' forget not to put the computer to a normal startup follow step 7 in the link. -
I can't find the "add and remove programs" in my control panel
The names have changed.
http://www.bleepingcomputer.com/tutorials/tutorial141.html
How to uninstall a program in Windows Vista
Read the tutorial above.
http://www.vista4beginners.com/Add-Remove-Programs-nowhere-to-be-found
"Add/Remove programs - not found?
See you soon.
Mick Murphy - Microsoft partner
-
What should * and * shouldn't go into Source code control?
I've seen posts with snippets of what should not go into source code control, but I've not seen a comprehensive list of what should and should not go into source control. Anyone know? Here's what I know so far - do not put the following files in the source control: .pss, .cpd, .ldb and .hhp.
Now I wonder about the XPJ file. If two or more people work on a project, this file should be source controlled?
Is there a specific list of files that need to be in control of source code in order to maintain the integrity of the project?
The answer is simple here is that machine specific files may not be archived. It is. PSS and. DPC files. The. HHP and. XPJ files are not specific machine, they are specific project and therefore should be archived. The confusion surrounding the HHP file can go down to find out if output CHM is produced. If you're not, we can say safely that this file may not be source controlled. But it costs nothing to register under source control so why make life more difficult by excluding it.
-
We contacted Adobe for help, but I also wanted to put this question in case someone has had this experience and can quickly provide a solution.
Environment
Windows 7 business
RoboHelp 11.0.3.268
Generation of WebHelp
Team Foundation Server
Visual Studio Professional 2010 Source code control
Problem
I am the original author of the Touchstone help system. Last week we started having two colleagues on board to work with me. On their systems, we have configured RoboHelp for working with TFS in Visual Studio using MSSCI provider 2010.
The initial project was a lot of conditional compilation tags. I removed all the and the expressions and everything checked into Source control. When my colleagues got the latest files from Source code control, and opened the project to Version control, we noticed that their projects were still conditional compilation with other elements that had long been removed tags. After some research, we have removed the CPF and PSS of source control files and let the RoboHelp to create them when we opened the project. That solved these problems - no conditional more don't build tags in the project.
Last Friday a colleague began to experience significant problems. When it right click on a topic to view properties, RoboHelp has stopped working. She was not able to do anything in RoboHelp since.
The same day I tried to look at settings of Version control (I had no problem to access all week). RoboHelp crashes as soon as I clicked on tools > Options. Colleague B had the same problem today.
This morning, I had problem A colleague.
Bottom line: we are suddenly not able to run 11 RoboHelp.
Our office employee internal help attempted to run the Visual Studio debugger. We get ' an unhandled in RoboHtml.exe win32 exception [5404]. " We also unhandled exceptions at various addresses with a read access violation address hex location.
After watching the Willem site that lists updates of RoboHelp, we thought to their installation, but we didn't know whether to install ALL the patches or Patch only 11.0.3. If all the patches, we didn't know whether to install them in a particular order.
Thank you very much for any assistance that someone of you may provide while we're also waiting to hear from the Adobe Support.
Carol
I was recently informed that the patches have changed and you only need to install later.
See www.grainge.org for creating tips and RoboHelp
-
What are the files should not be checked into Source code control?
Good afternoon.
11 of RoboHelp, integrated with Team Foundation Server and Visual Studio 2010 running.
When two colleagues recently "received" the latest files from Source code control project, they also got the elements that have been removed or deleted. For example, I had deleted all the tags of conditional compilation of my project, but their version included always build tags. Finally, thanks in part to an old post from Peter Grainge, we realized that the PSS in Source code control contains a lot of this old information. We have removed the PSS and order check into Source control. Problem solved. No conditional build tags or unwanted Source unique Layouts, etc. (I think the PSS got archived by our release engineer when he was trying to solve another problem. There are two years it has been not been archived.)
I vaguely remember something read somewhere once in checking is not some files in RoboHelp project in source control management. So far, I have not found such information in RoboHelp help or online.
Anyone know where I can find a list of RoboHelp HTML project management files, such as the PSS file, which should never be checked into Source code control?
Thank you very much.
Carol LevineWatch excerpts on my site.
See www.grainge.org for creating tips and RoboHelp
-
Robo HTML 9 won't open our Source code control project after initial startup.
We have a project under version control that we use for ever, since 2003 or more and for many versions of HR. Now that we have upgraded to 9, this project will open the first time under version control and operate normally. Once you close the project, and the attempt to reopen the start screen, it opens just great, but not in version control. The files are always set to read-only. I made this several times and the only way I can work on my project under version control is to act as I open a project from scratch, then overwrite my files the with the files from the server. It wouldn't be so bad but I'm 3000 miles the server and 13 hops over a slow firewall on the other end. While this was never a problem in the past, it's a big problem because it takes hours for all files to download and overwrite my files the.
This only happens with RH9 and Version 3.1 control. RH8 works without problem. So, I don't know if it's a starter RH9 problem or a problem of Source control. Maybe I'll make a similar thread HR. I'll wait to see if I receive useful tours of it first.
It's very strange, I RH9 open for several days because I was afraid to close the project for this reason and yesterday I published for the month so heat is less now but today it has opened with no source code control. If I go to control code Source, the only thing I can choose is updates to the source code control project. That's how he got into source control after conversion in RH9.
We have another project that seems to open normally control version, but we can only save in HTML topics. No responses to this topic after a week.
Got any ideas?
I tried the names of different file, different paths, etc.
Thank you
DV
OK, here's a weird one, I used add it to version control icon in the menu bar, he already knew the path so I thought I'm the only person who was edit these files for the last few days so I clicked on add to version control. He added. I closed and reopeded and still the same files were checked. Closed, checked in the whole, and then reopened and he works at SourceControl. Strange that after opening of source control and closing to reopen and tell him to put the project into source control. Obviously some indicator is not is defined somewhere. It might help other people having problems opening source control files.
DV
-
RoboHelp 7 - new files under source code control
I keep my RoboHelp project under source control using Perforce rather than the source control system comes with RoboHelp. (The reason why I use Perforce, it is that my company has Perforce administrators that the functioning of the system and ensure that data is backed up in the event of hardware failure.) I don't want to assume this responsibility.)
I discovered when I upgraded to RoboHelp 6, there is at least 1 new type of file in RoboHelp and I had to place it under source control (there are probably more, but I don't remember). My question is:
RoboHelp 7 introduces new file types, and, if so, whether they are under source code control?
In addition, RoboHelp 7 discouraged all types files?I am answering my own question here in case it's of use to someone else. I discovered these new files in RoboHelp 7 that I needed to place it under source control:
fmstyles. CSS
RHExtDocAuxData.apj
RHFrameDocs.apj
RHFrameStyleMappings.apj
rhsnippet. APJ
rhvariable. APJ-Al Davidson
-
Passing variables between LabVIEW and TestStand
Hello
I'm just learning how to use TestStand and although there are a multitude of resources available, I always find me at a loss on how to pass variables between TS and LV, leaving me to think that there is one fundamental thing that I'm missing which is likely, given that I have a weeks experience with LabVIEW and a days of experience with TestStand.
I took a glance to the example of 'Clusters' to the Code Modules in TestStand examples (I use TS 2016 if it matters) because I thought it would be quite ideal for what I hope. In this case, I hope to be able to pass a string (a file path) to LabVIEW and VI power take this string and use it as part of an order for the Exec.VI system. Then, I would be able to pass strings back to TestStand to show the user if an error occurred, but I thought I should get the first part of work.
I guess my question is what do I have to wait to see in clusters to the example of the Modules of Code? The Watch window displays all defined variables premise on which has the ContainerOut in the Variables pane, but I don't see any kind of update on facades (VI1.vi and VI2.vi) LabVIEW code. Should I be?
I looked at a few other discussions of the forum here and here, as well as the document of the basis of knowledge here, but could not recreate their solutions. It seems that the connector pane would be a viable way to go, but I'm not sure on how we create and use effectively. According to this document , it makes it seem like it should be simple enough to makes these terminals, but I am still missing a key step. I was able to follow all the steps on the knowledge base document and run the sequence, but then had no idea if it worked or not; I have the report show me the values of the variables I put, but I have no idea whether or not he actually did anything with the LabVIEW VI, or how I could see that.
Please let me know if you need further information or clarifaction everything I ask.
Thank you for your time,
JColvinDigilent, a company of National Instruments
If you want to enter values, you must create a vi for instance dialog box
The OK button will allow new values to pass to the output terminals.
A Cancel button will pass just the original through the output values without alteration. The VI will close when either the OK button or cancel were pressed.
Concerning
Ray
Maybe you are looking for
-
I have the Mac 2010 (white) book, it needs an exchange of hard drive, I can't go for one SSD instead of a normal HARD drive? (Assuming - Kingston UV300 120 GB 2.5 inch Solid State Drive).
-
I'm afraid to update my phone. The last update made my musical library not available unless I accepted the popup Apple constant Radio for $15 per month. Some of my apps stopped working and my son got my texts.
-
Sorting Fix audiobook? Sansa Fuze + Firmware 02.38.06
I was not able to see that books audio sorting has changed. If anyone has seen a change, Please tell me what has changed. It always seems that this audiobook section is designed for one type of book, I did not. I asked for an answer that someone
-
HP T5730 XPe SP - 3 TeemTalk 7.0 Soft buttons doesn't work not as expected
I am trying to program the soft keys in TeemTalk 7.0. I built 'scripts', by using the build in tools. When I open a saved session keys are displayed as expected. However by pressing one of the key does not execute the associated scripts. A sample s
-
HDMI to an analog TV/recorder output
My Dell Studio 1535 has an HDMI output port. I wish to connect to an analog TV older type with the 3 red/white/yellow RCA inputs. I see adapter with one end HDMI cables and 3 RCA plugs at the other end pretty cheap but other converters with inputs an