IBM Lotus Smartsuite

Similar Questions

• Impossible to install Lotus SmartSuite 9.8.2, access to system registry error and should then stop error.

  Original title: loading lotus smartsuite in windows 7

  Loading lotus smartsuite 9.8.2 in windows 7 I get the error message ' access to system registry error and should then quiting error. "

  Hello

  The problem is specific to the application?

  If the problem is specific to Lotus SmartSuite 9.8.2 I'd contact the IBM Lotus SmartSuite support for assistance. Consult the following link:

  http://www-947.IBM.com/support/entry/portal/overview/software/Lotus/Lotus_SmartSuite

• Could not load the Lotus Smartsuite on new computer

  I can't get my Lotus Smartsuite to load on my new computer windows 7. IBM Web site says it runs on windows 7, it is trying to load, but my new machine 1.5 TB of hard drive and the software says I have a negative memory when loading, so it will not install. Don't want to partition, is their answer to another? Lotus Smartsuite ver 9.8.1

  Must be installed if you right-click on the Setup file and run as administrator...

  You might want to try to support IBM for this one. The installation file is possibly corrupted somehow...

  I know that organizing is very good and there was a look-a-like Organizer, who was free at the same time, but I suspect that the author was informed to scrap it.

  An alternative here (link at the top of the page). I have not tried but it can do you if you have no success with r.0.

  The other link is to many other PIM

  http://EssentialPIM.com/

  http://www.FreeDownloadsCenter.com/Information_Management/Personal_Information_Managers/

• Lotus Smartsuite 97 compatibility

  I have Windows 7 installed on my Acer laptop and my Acer netbook. I installed Lotus Smartsuite 97 on both without problem. All Lotus programs will work perfectly. I just installed Win 7 on my desktop and now I try to install Smartsuite 97, but get a message saying that the compatibility problems with approach 9.x. Control solutions online gives nothing. You try to run the installation program displays a message 'error access registry' and "unexpected error, stop smoking" if I try to move forward. What is the solution?

  Gary Miller
  E-mail address is removed from the privacy *.

  You try to install it on a Windows 7 64-bit system? IBM said that it is a go...-Mike Hall MVP Windows: consumer http://msmvps.com/blogs/mikehall/ Mike Hall MVP - Windows Desktop Experience http://msmvps.com/blogs/mikehall/

• How do I reinstall the Group Lotus SmartSuite

  This problem is related to my previous post of 20/06/2008 18:04 Re: problem of Installation of Windows XP Recovery:

  + Quote: +.
  + Tried to install Win XP Pro on my PC Toshiba 5105-S702 using the recovery CD (circa 2001) that were provided with it, but was blocked at the beginning of the recovery process, with a message indicating that the product key is not valid. I suspect that it happened because the defective mother on the laptop had been replaced by a new motherboard. +

  + Luckily I had bought a Version XP Pro SP1 detail a few years before, so I was able to use it instead of the recovery CD. +
  + End quote.

  In fact, it was a 'bad machine' error message that pops up in place, not a message of "invalid product key".

  I just realized that I have a Lotus SmartSuiteV9.0 CD that was bundled with my computer laptop satellite 5105-S702. Of course, I want to use this new software, but suspect that I will experience the same kind of problem I've experienced with the installation of Win XP from the Toshiba restore CD, as shown above.

  In other words, I suspect that either the SmartSuite CD will not be recognized by, or recognize, the new motherbaord (which in fact is the motherboard for the equivalent European model 5100-603) & and/or Win XP Pro installed on the laptop, which has been installed since the commercial version of Win XP Pro SP1 CD, rather than the recovery CD (which (, by the way has a top scratch, and therefore can also be the cause of the problem original recovery CD installation).

  If you would be grateful if someone could tell me how to get around this problem of installation of Lotus SmartSuite, short obataining a restore CD of Win XP to install on the computer prior to the installation of SmartSuite, & and/or get an ASP to fix the DMI information stored on the new replacement motherboard.

  Thank you

  AlanCB

  Hello

  Is this Lotus SmartSuite software must be part of the image of Toshiba which is placed on the Toshiba Recovery CD.
  Fact is also that you are not able to use the recovery CD because of the wrong information DMI stored on the motherboard.
  The new recovery CD will not help you because in my opinion, the CDs are copied and are all the same. So the only solution is to contact the ASP to modify and correct the stored DMI.

  PS: of course, you can purchase a full version of Lotus SmartSuite and can then reinstall it on your Win XP operating system.

  Best regards

• Lotus Smartsuite on new HP 500-250ea

  
  

  Hi Jaco

  Yes it is strange. I've always been able to install software before, even if I had to do with administrator privileges, and as I said in my original post, I managed to install Lotus Smartsuite on other Windows 8 and 8.1 machines.

  But never mind, I found now another Organizer app (organizing Anytime) which does not seem to simulate the version of Lotus, so I'll give it a try. Also, I'm pretty sure I'll be able to download all my data from Lotus, which is a major bonus. That said, I'm about to go on vacation and do not want to happen while I'm away, I'll have to give up ordering him later.

  In the meantime, thanks for your help - it's really appreciated.

• Can no longer create charts in Lotus SmartSuite 9.5 in Windows 7

  I have Windows 7 and using Lotus SmartSuite 9.5 without any difficulties until recently.  I can always create and update spreadsheets without difficulty, but my paintings have disappeared.  If I try to create a new chart, Lotus unresponsive and finally by closes.  No error message is given.  I tried to use the Troubleshoot utility and some sort of compatibility thing (sorry, don't remember what it was), but all that was to increase security and force me to leave Lotus make changes before allowing me to open the program, which was very annoying that I did a system restore.  I reinstalled Lotus but still cannot create a chart.  Anyone know of a patch or fix for this problem?  Thanks in advance for any help.

  I would ask the experts in a forum of Lotus SmartSuite.

• Lotus SmartSuite 9.8 tries to install in Windows 7

  The Compaq Presario with Windows XP and Lotus Organizer 4.1 demo is about to bite the dust, and I REALLY don't want to lose the data. I bought a HP laptop with Windows 7 Home Premium 64-bit with 750 GB HDD and a disc of Lotus SmartSuite Millennium 9.8.1 and could really use a detailed step by step how to install the Lotus program - I'm so scared to mess up my laptop and winding up with nothing.

  My hard drive, readers are listed as drive Local (c) and (d) recovery and the RW DVD drive (E :) - when I double click on the E: drive, I get "Error the system registry access" and "unexpected error;) quit smoking»

  When I click with the right button on the E: drive & click on properties, I just get tabs ' General, hardware, sharing, customize, recording ".

  When I click Start type E: - I get a list of items on E: autorun, Extra, fonts, Lotus, System32, Temp, Windows, autorun, instmsia, instmsiw, ISRun, Lotus SmartSuite-English ReadMe, ReadNet and 3 configurations (I find is .exe).  If I click on the setup.exe, he asks "do allow you the program following an unknown Publisher to make changes to this computer? I did have the courage to click Yes. This install program or mess up my laptop?  If I click Yes, are there questions on, or am, I did, running?

  I'm not computer illiterate, but am also not irritable and would appreciate help leading me through this installation.  Thank you in advance.

  I installed Lotus Smart Suite 9.8 on several computers Windows 7 without problem.  Do not click twice on the CD or enable autorun to start the installation, simply use Windows Explorer to view the contents of the CD, then right click on Setup.exe and choose 'Run as administrator', it should install just fine.

  John

• Windows 7 Ultimate and Lotus SmartSuite

  I use a Dell Studio 1737 that came with Vista. I've upgraded to Windows 7 Pro and used the Lotus SmartSuite 9.8.1 without any problem. I had to change the hard drive and installed a full version of Windows 7 Ultimate. I installed all my programs without any problem except for the Lotus Suite. When I try to install it, I get a message "error access registry systems", and the program does not load. Any suggestions? I use the Smartsuite on my desktop that came with Windows 7 Home without any problems. Frank Hick

  Try this:

  Insert the installation media in the drive. Do not access the disk with autorun. Stop smoking. Use Windows Explorer to install using setup.exe.

  Tom Ferguson

• Loading of Lotus Smartsuite in Windows 7

  I have a very old version of Lotus 123 (specifically Lotus Smartsuite 3.1) and even if it worked on Windows 95 and every version of Windows since it does not load on Windows 7; I tried the 64-bit compatibility. support Windows 7 breast without a bit of luck.  I've built a few programs very, very large (2 + meg of spreadsheets) with this version of Lotus, and they don't run correctly even with new versions of Lotus.  So, my problem.  I need load and run this version of Lotus (Smartsuite 3.1) so my spreadsheet works correctly.  It took a year to build, and I don't really have another year to review and update to a newer version of Lotus which may or may not work in Windows 7.

  Can make you use of a PC virtual solution?

  Windows Virtual PC
  Download Windows XP Mode
  http://www.Microsoft.com/Windows/Virtual-PC/Download.aspx

  Windows XP Mode (Windows 7 only, but not one of the Home versions) "you are not eligible to download Windows XP Mode. You must have Windows 7 Professional, enterprise or full to run Windows XP Mode."

  Virtual PC 2007
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=04d26402-3199-48A3-afa2-2dc0b40a73b6&displaylang=en&TM

  Virtual PC 2007 running on Windows 7
  http://blogs.msdn.com/virtual_pc_guy/archive/2009/08/19/running-Virtual-PC-2007-on-Windows-7.aspx

  This warranty covers the gambit set of VMS in the 'Home' versions if you want to have a look.  Of course you will need a licensed copy of XP to install and run in any of them (except XP Mode).

  VirtualBox is an impressive VM competitor
  http://WindowsSecrets.com/search/?CX=017937947691920082874%3A_ilcm6kdy_y&COF=FORID%3A11&q=VirtualBox+is+an+impressive+VM+contender+&SA=search&advWS=1&advSAN=1&advPages=15

  Setting up a Dual Boot with XP system could be another option to consider?

  How to make a Dual Boot Installation with Windows 7 and XP
  http://www.SevenForums.com/tutorials/8057-dual-boot-installation-Windows-7-XP.html

• Lotus Smartsuite Millennium Edition is compatible with Windows 7, get "is not a valid win32 application" message

  Is compatiblew Lotus Smartsuite with Word 7

  Get "wordpro is not a valid win32 application" when from word processor & message on time settings change when you open the worksheet, is it because of compatibility issues, or I had somethiung wrong during installation

  I know Smartsuite is old hat but have used it for many years to effect gpood and want to continue if possible

  If not compatible how I can role my new computer restores on Vista please

  YES, IT is At first, that I have failed to install.  When I put the cd in the drive, I would get an error that says "cannot access the registry" or something like that.  I spent hours on the phone with lotus in India and they said they would email me how to solve the problem but have never, even after a few, follow-up phone calls.  Then I found a post in line with a solution and I'm sharing it here.

  I have windows 7 64 bit version and it is now installed and works very well with my client files old husbands and he is so happy.  What you need to do is put the CD in the drive and then go to windows Explorer and click on the D drive (or whatever your external drive) and look at the files that are on the CD.  Find the configuration file and click it.  Simple as Hello - it will install.  He just won "t install when you do it directly from the CD in.

  I hope that others may find this useful.  I'm not a technology person, so I'm glad it was so simple.

• I have a problem with deleting a password of a program in IBM lotus 123.

  Original title: IBM Lotus 1-2-3

  I'm under Lotus 123 97 on Windows 7.

  I'm having a promlem remove a PASSWORD in a program.

  I, ve been on SECURITY, then on RESERVATION, but from there I met problems.

  Any suggestions?

  Hello Norm,

  Welcome to the Microsoft community where you will get the best solutions for Windows related problems.

  I understand you have questions, remove the password of IBM Lotus program. The question you have posted is related to IBM Lotus and would be better suited to IBM Lotus support.

  I suggest you to check with the support of IBM Lotus for more information.

  http://www-01.IBM.com/software/Lotus/products/123/

  I hope this helps you get the password removed. If you have problems with Windows in the future, please post in the Microsoft Community.

• Customer Smartphones BlackBerry blackBerry for IBM Lotus Sametime for torch

  Hi all

  I was pulling my hair since last Friday, trying to get the BlackBerry Client for IBM Lotus Sametime v2.5.20 to work on my new Blackberry Torch, does not.

  I am running BB Desktop Manager 6.0.0.40.

  I tried install repeated and absorption of the Sametime Client on the torch.

  He appears in the last installed application, but no where else on the blackberry.

  When you examine the properties of it on the Blackberry, Research In Motion, 2.5.20 appears like Enterprise Messenger.

  If you go in there, it says that it is installed, but not running.

  I am a long time and administrator Blackberry user and have never run into something like this on a Blackberry.

  Everyone ran in this or happed to know where I can get a newer (maybe compatible) version of the BlackBerry Client for IBM Lotus Sametime for the torch?

  Thank you... I went through the other forum that you sent the link and follow the instructions it works for me now very well.

  I created the For_6.0.0 folder and deleted the files of For_5.0.0

  Started v6 Manager Office and files to import used and chosen the file updated the sametime.alx

  The error screen invited that there is no request to load on the device

  BUT he appeared in the Application section and chose the sign + for add and then apply and the rest went smooth.

  Looks like she inherits screen controls touch in V5 for storm device while it is perfectly integrated with the Visual menu short context.

  Don't know what suggest you other than trial and error by repeated uninstall and install. Perform a clean uninstall using DM and then proceed as above which I'm sure you could have done.

  I enclose the full zip with the software and the files updated the alx.

• In remote desktop, when I run Lotus Smartsuite, the dialog boxes are empty when there should be messages!

  My CRM is created through Lotus Smartsuite approach and it is sitting on a server. Access us this server via remote desktop.

  When you access via Windows XP and older, you can consider all messages dialog box. However, when you access it through Windows 7, all messages to the dialog box disappear.

  Can someone shed light on this and suggest the remedy?

  See: http://playbyear.com.my/docs/StatusBlank.PNG

  Thank you.

  Alex

  Hello

  The question you have posted is related to CRM and would be better suited to the TechNet community.

  Please visit the link below to find a community that will provide the support you want.
  http://social.Microsoft.com/forums/en/CRM/threads

  I hope this helps.

• I have a problem with IBM Lotus Symphony - the program crashing several times every 5 seconds

  Original thread - I have a problem with IBM Lotus Symphony.  I am trying to edit a document, and I can't get any task done without the program crashing several times every 5 seconds.  What can I do to fix this?

  The program crashes every 5 seconds.  I started having this problem last night, but I didn't even know that first of all, there was a problem until today.

  Hello
   
  
  You receive an error message/code when you edit a document in IBM Lotus Symphony?
   
  
  I suggest to put the computer in a clean boot state and then try to open the program and check if it helps.
  Note: when you perform a clean boot, you may temporarily lose some functionality. When you start the computer as usual, the function returns. However, you may receive the error message, or you can experience the original behavior.
  How to solve the problem by running the clean boot in Windows 7:
  http://support.Microsoft.com/kb/929135
  Note: once you have completed troubleshooting, perform the steps in the step 7: to reset the computer as usual.
  If the problem persists please contact the IBM Lotus Symphony support for assistance. See the link below.
  http://www-03.IBM.com/software/Lotus/Symphony/ForumnsHome.nsf/home
   
  It will be useful.