IBRD read hexadecimal data

Similar Questions

• Satellite P500/01R reads the data, but cannot write data on CD files

  I recently bought a laptop Satellite P500/01R. I am able to read a data CD, but can't write data on CD files. The CD is read/write.

  Any ideas?

  Hello

  Have you tried different burning software?
  I m using Nero and in my opinion one of the apps better combustion.
  Here, I can choose between CD, DVD, DL or Blueray (only possible if the CD/DVD drive also supports this).

  Have you also checked diffΘrents CDs from different manufacturers?
  You should do this since not all disks are 100% compatible.
  I had several problems with different CD or DVD in most of the cases it was a compatibility issue, I tried TDK and this kind of drive is compatible with my CD/DVD drive
  I m using the standard of R.

• I'm reading the data (speed rate and flow) of a table and it plot in a graph.

  I'm reading the data (speed rate and flow) of a table and it plot in a graph. I need to draw two values of l/min (speed) to the same speed. How can I do using a loop for?

  There is no need actually to use a loop FOR this. And using a graphic waveform isn't the type of field for this, for a waveform you a (Start), the dT T0 (greatness not) and table D (Data), this isn't what you want unless you know precisely the measure will take place according to an orderly disposal, you'd want a xy chart so that you can trace the measures where they occur in the axes X and Y of preference.

  

• Read more data 1 byte of visa

  Hi, when I use VISA to read more data of 1 byte, only the first table got the data, but I want to separate data from 40-bit to 5 tables. Does someone know how to separate data in the tables? Thank you for the reply!

  Your problem is the ASCII conversion attempt.  As I said before, you have raw binary data.  Therefore do not touch anything that deals with ASCII.  All you have to do is take your byte array and convert each element in an array of Booleans.

  

• How to read the date and time of a file by labview information

  How to read the date and time of a file by labview information? for example, time created and updated time.

  The similar question had already spoken here (this is the old thread but still seems topical):

  http://forums.NI.com/T5/LabVIEW/file-date-created/TD-p/109836

• Read the data in the first column selected in a multicolumn listbox

  When a line is selected in a ListBox multicolumn (1 point), how can I go on reading the data in the first column?

  

  The listbox multicolumn itself is the digital picture data type. If you have allowed only 1 point selection and selection mode select any row, it returns the line number. The property node 'Element names' to return a table 2d-chains of the elements in your Inbox. The index of the row to the value of the listbox and column 0. See code attached.

• reads the data when I select run

  When I insist on running my program reads the data from the meter power... when I'm not it gives me an error. I tried to put right waiting them etc and nothing seems to be set. Also, when I take the vi that read data from the electricity meter, the code runs much faster. I don't know if this has to do with global variables or what, but I just change a code supplied with this unit and it included global variables. I tried not to play with those yet. Anyway, if someone sees something that would eventually cure this problem please let me know. Thank you.

  
  

• Organize the hexadecimal data / USB interface

  Hello

  I implemented a program that send BCD codes on a microcontroller (PIC16F877) (transmission of 8-bit each) via the USB port. Due to synchronization problems, data are transmitted continuously. I can receive the data on labview. However, I cannot read the data all the time and therefore the data read aren't on the right order. I added a starting framework to my data and I would like to know how I can move my bytes to organize them in the right order (Frame/Data1/Data2 /...)? (Perhaps using a loop with a comparison)

  So how can I select only some bits? Do I have to reset the other bits?

  I hope that I was clear enough. I'm quite a beginner with labview (started a few weeks ago)

  Thank you

  Hello

  Information read in the buffer are types of channels. To work on the BCD code, I probably have to change it to a byte array and then decode byte by byte. But it does not work. The translation is wrong. Do you have any idea why?

  I have attached my VI. This is just a test code that I will implement after on my VI read the USB input

• How to read the date of the day of the day of the year?

  I want to put 30 days for the test of endurance for the application of the components. the user will have the current value of 30 days with specify them the end of the day.

  I saw that the "seconds to Date/Time.vi" sure I checked the day of the year. If I can use this day of the year, I can add + 30 read 30 date.

  Barros,

  What I gave was the answer you were looking for originally because I believe.  You will not just be able to read the date in a coherent way and then add 30.  You can either use the function Get time in seconds or a few varaint it and then add the offset you want (you could use the get a Date/time string and enter the date directly, but this digital conversion which will be useful in the monitoring of the time elapsed will be much more difficult than what I provided only).  If you want to stop the test, simply to keep track of the amount of time the test is in pause and extension at the time where that amount.

  Cheers, Matt

• Reading large data using the database connectivity

  Hello

  I use the Labview database connectivity toolkit to connect to my database sqlitev3 (I'm using ODBC). I just have to connect to the database (using the block of open_connection) and read all the values inside (using the select_data block). The problem is that my database is huge (about 2 GB), and I get this error:

  . VI NI_Database_API.lvlib:Rec FETCH Recordset Data (R)-> NI_Database_API.lvlibB Tools Select Data.vi-> real_web.vi-> real_web.vi.ProxyCallerADO error: 0x8007000E Exception occurred in provider: not enough memory is available to complete this operation. in .vi NI_Database_API.lvlib:Rec Fetch Recordset Data (R)-> NI_Database_API.lvlibB Tools Select Data.vi-> real_web.vi-> real_web.vi.ProxyCaller

  What should I do? It seems that he reads the data in the memory and it doesn't have enough space for it. When I read the data I want to write to a file.

  

  Read it in pieces. Write each piece to the file, and then repeat with the next segment. Try to read and process all data in one shot is not very practical and you found out will not work.

• How to read the data from a channel named in windows using labview

  Hello

  I need to read the channel named in windows data. The pipe is created by python by another application. This application post permanent data on the pipe. But I don't know how to read data using labview. is it possible to read the data from different application? If possible, how to start?

  Thanks in advance

  concerning

  RJ

  Hi Rolf,.

  It's just, because of driving is not initialized completely, pipe read returns error 42, I added 2 seconds late, then its work perfect.

  Thank you very much.

  Concerning

  RJ

• delay in reading the data when you are using multiple loops clocked on target RT

  Hello

  I have five loops clocked on a target of RT and I communicate to and from the host vi. All the loops of the value of the different priorities however when all running at the same time I found windows vi take up to 1 minute before reading the data. Four disabling loops to fix the problem. It is possible to start the app right after start windows vi?

  Kind regards

  Solved the problem by disabling variable autodeploy

  Thank you

• Reading Excel data

  Hello

  I have a file in .xls excel format. I want to read the data of this daughter.

  most of the people said in the forum OR what convert .xls .csv file format and read data from «Read the file spreadsheet VI»

  Another option for read excel file without converting a .xls file in .csv format.

  Please help me

  Thank you

  Cedric Virpara

  Yes, you can use ActiveX

  https://decibel.NI.com/content/docs/doc-19913

• How to read the data in a device connected to the usb port

  Is there a class or object, or the piece of code in Java that is comparable to the PDQComm32.ocx and the mscomm32.ocx used in VB6? I need to know how to read the data of a device plugged into the usb port of the BBerry. Is it possible to use the BB to read data from a device via a usb cable?

  I'm new in Java and I'm looking for the opportunity to write a project to read the data in a device with this program that can turn on a BB instead of on a pc.

  Thank you

  Did you watch net.rim.device.api.system.USBPort?

  That's what the doc says:

  Provides access to the USB port of the device.

  Avoid using this class in applications, as it is not portable. On the contrary, if you need to access the USB port, use factory CLDC Connector to serve a connection.

  Rab

• How to read the data written to the virtual disk

  I use the following VDDK function to read the Flash disk from VMware

  http://bigchainring.kicks-ass.NET/functions/VixDiskLib_Read.html

  But areas of complete disc playback, including empty spaces. I need to back up only the data written to the Flash disk. It is to save the backup disk space (for example if 126 instant KB is written in 40 GB of disk snapshot, then we read only 126 KB and not 40 GB drive). Please suggest the correct way to read the data written to the Flash disk as well as to reproduce the same virtual disk with the data.

  VMware vSphere API queryChangedDiskAreas() can be used to obtain the data blocks in the virtual disk.

  Steps to follow:

  1. get the beaches of block of data (numbers) using queryChangedDiskAreas() API with '*' as argument.

  2 read the data of the specific blocks by using VixDiskLib_Read()

  3. write to another drive using VixDiskLib_Write()