ICB cannot link static lib VS2010 files

A whole new file static lib created in VS2010 Express hat the following content:

StaticLib.h:

call __stdcall void (void);

StaticLib.c

__stdcall Sub call (void) {}

VS2010 compiles this as a c file. It is already ensured by the end '.c', but to be sure, I use the compiler option/TC.

All other options to their default values. I compile using "Release | Win32. "

The created lib file is copied into a new CVI folder, as well as the header.

Two files are added to the project.

In addition, a main.c is created with the following content:

void main (void) {call() ;}

The compilation attempt is abandoned with the following error message:

Incorrect header encountered during playback of external module: 'Release\StaticLib.obj '.

Aborted charge of Member "Release\StaticLib.obj" of the library 'c:\C90\LibImportTest\Release\LibImportTest.lib '.

Is it possible to reuse the static lib files compiled in VS2010 with CVI?

If Yes, please show me a minimal example.

(please do not post suggestions about the dll)

I tried with CVI 2012. I think it's the setting of the project 2010 VC: Configuration Properties > General > Whole Program Optimization use link Time Code Generation that is causing the problem with CVI. Change this setting to 'No Whole Program Optimization' and CVI 2012 is able to bind the file lib VC 2010 for me. Hope it's the same problem for you. Otherwise, try to change the other VC optimization or the language settings in the project properties dialog box.

Tags: NI Software

Similar Questions

  • Can not upgrade Lightroom - ERROR: DS015: cannot read the target of the symbolic link to the source file

    Hello

    I'm trying to upgrade from Lightroom to the latest version on my last OS X 10.11 with all updates. The update fails with the error in the log:

    ERROR: DS015: cannot read the target of the symbolic link to the source file "/ Applications/Adobe Lightroom/Adobe Lightroom.app/Contents/Helpers/DynamicLinkMediaServer/application/dynamiclinkmediaserver.» app/Contents/amecommand.app/Contents/Dictionaries "Seq (30)"

    Please find attached the log.

    Thank you

    Dmitry

    26/07/16 15:26:48:532 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | *=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*

    26/07/16 15:26:48:532 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | START - Installer Session

    26/07/16 15:26:48:532 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | *=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*

    26/07/16 15:26:48:532 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | Version of RIBS: 9.0.0.65

    26/07/16 15:26:48:533 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | The OSX version: 10.11.6

    26/07/16 15:26:48:533 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | : TIMER: [Total timer]

    26/07/16 15:26:48:533 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | CHECK: Single Instance

    26/07/16 15:26:48:533 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | CHECK: credentials

    26/07/16 15:26:48:533 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | Load deployment file

    26/07/16 15:26:48:533 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | DeploymentFiles option not given

    26/07/16 15:26:48:533 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | CHECK: Another installer native OS already running

    26/07/16 15:26:48:533 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | Create required folders

    26/07/16 15:26:48:533 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | Assuming the installation mode

    26/07/16 15:26:48:533 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | Search for path source install

    26/07/16 15:26:48:533 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | Media Sync DB...

    26/07/16 15:26:48:533 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | : TIMER: [synchronize media DB]

    26/07/16 15:26:48:533 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | Pre check media db sync

    26/07/16 15:26:48:533 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | End of pre check media db sync. Exit code: 0

    26/07/16 15:26:48:533 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | : TIMER END: [media DB Sync] had 32 milliseconds (0.032 seconds) DTR = 15625 Kbps (15,2588 Mbps)

    26/07/16 15:26:48:533 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | Ready to initialize the session started by...

    26/07/16 15:26:48:533 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | : TIMER: [CreatePayloadSession]

    26/07/16 15:26:48:533 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | -START - updated media Sources - BEGIN-

    26/07/16 15:26:48:533 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | Update source path: /Users/username/Library/Caches/Adobe/AAMUpdater/AdobeLightroom-6.0/6.6.1

    26/07/16 15:26:48:533 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | Update media info for: {2C8CD39F-7A83-5516-B0CA-71BA5E60E7EF}

    26/07/16 15:26:48:534 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | Ignoring the original being local installation source data

    26/07/16 15:26:48:534 | [INFO] |  | OOBE. OF |  |  |  | 2179470 |   Type: order 0, volume: 1, name of media: Lightroom 6

    26/07/16 15:26:48:534 | [INFO] |  | OOBE. OF |  |  |  | 2179470 |   Path: /Users/username/Library/Caches/Adobe/AAMUpdater/AdobeLightroom-6.0/6.6.1/payloads/AdobeLi ghtroom6-mul-210716042246/AdobeLightroom6-mul - 210716042246.zip

    26/07/16 15:26:48:534 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | -Updated media Sources - the END-

    26/07/16 15:26:48:539 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | Support for the version of COAST range: [0.0.0.0,9.0.0.65]

    26/07/16 15:26:48:539 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | -CreatePayloadSession: the machine is x 86-

    26/07/16 15:26:48:540 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | _ Check _ subscribers dependence

    26/07/16 15:26:48:541 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | Order of operation BEGIN all the payloads of session: library (requires, satisfied)

    26/07/16 15:26:48:541 | [INFO] |  | OOBE. OF |  |  |  | 2179470 |   Adobe Lightroom_6.6.1_AdobeLightroom6 - mul 6.6.1.0 {2C8CD39F-7A83-5516-B0CA-71BA5E60E7EF}: 0 (0.0)

    26/07/16 15:26:48:541 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | COMPLETE the operation order for all the payloads of session: library (requires, satisfied)

    26/07/16 15:26:48:541 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | Patch Adobe Lightroom_6.6.1_AdobeLightroom6 - mul 6.6.1.0 {2C8CD39F-7A83-5516-B0CA-71BA5E60E7EF} can be applied to the product Adobe Lightroom 6.0.0.0 {8048A5DF-8A70-5BE1-954B-E0FDE1BD0D0D}

    26/07/16 15:26:48:636 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | Setting the property "conflictingProcessInfo": /tmp/6800FD8F-2255-41DB-BDAC-3E2051C4867E/95C9D108-2A4B-4DD6-A99C-4AB76BBC4C6D

    26/07/16 15:26:48:636 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | Setting the property "installSourcePath": /Users/username/Library/Caches/Adobe/AAMUpdater/AdobeLightroom-6.0/6.6.1

    26/07/16 15:26:48:636 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | Definition of property 'mode': silencer

    26/07/16 15:26:48:636 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | Setting the property "updateManifestPath": Users/username/Library/Application Support/Adobe/AAMUpdater/1.0/Data/AdobeLightroom-6.0/6.6.1/6.6.1.xml

    26/07/16 15:26:48:636 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | Setting the property "workflow": update

    26/07/16 15:26:48:636 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | Replace the "conflictingProcessInfo" property to: /tmp/6800FD8F-2255-41DB-BDAC-3E2051C4867E/95C9D108-2A4B-4DD6-A99C-4AB76BBC4C6D

    26/07/16 15:26:48:636 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | Replace the "extensionsOnly" property to: 1

    26/07/16 15:26:48:636 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | Replace the 'mode' property to: silent

    26/07/16 15:26:48:636 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | Replace the "patchesOnly" property to: 1

    26/07/16 15:26:48:636 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | Replace the "updateManifestPath" property to: Users/username/Library/Application Support/Adobe/AAMUpdater/1.0/Data/AdobeLightroom-6.0/6.6.1/6.6.1.xml

    26/07/16 15:26:48:636 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | Replace the "workflow" property to: update

    26/07/16 15:26:48:637 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | Find actions of payload:

    26/07/16 15:26:48:637 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | Decide which mode of installation to use...

    26/07/16 15:26:48:638 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | Setting START asked actions of payload

    26/07/16 15:26:48:638 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | Value returned by searches for payload: Adobe Lightroom_6.6.1_AdobeLightroom6 - mul 6.6.1.0 {2C8CD39F-7A83-5516-B0CA-71BA5E60E7EF} is: false

    26/07/16 15:26:48:638 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | String action for Adobe Lightroom_6.6.1_AdobeLightroom6 - mul 6.6.1.0 {2C8CD39F-7A83-5516-B0CA-71BA5E60E7EF} is installed

    26/07/16 15:26:48:638 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | Setting END asked actions of payload

    26/07/16 15:26:48:639 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | Were collected advanced path check to INSTALLDIR

    26/07/16 15:26:48:639 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | INSTALLDIR is a correct path

    26/07/16 15:26:48:639 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | INSTALLDIR is not the root path

    26/07/16 15:26:48:639 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | INSTALLDIR is on a local volume

    26/07/16 15:26:48:639 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | INSTALLDIR is on a volume that is accessible in writing

    26/07/16 15:26:48:639 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | INSTALLDIR is not on a case-sensitive volume

    26/07/16 15:26:48:639 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | INSTALLDIR successful path validation database path: / applications

    26/07/16 15:26:48:731 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | Operations START InstallOperationsQueue unordered

    26/07/16 15:26:48:731 | [INFO] |  | OOBE. OF |  |  |  | 2179470 |   Adobe Lightroom_6.6.1_AdobeLightroom6 - mul 6.6.1.0 {2C8CD39F-7A83-5516-B0CA-71BA5E60E7EF}: operation to install

    26/07/16 15:26:48:731 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | Unordered InstallOperationsQueue to END operations

    26/07/16 15:26:48:731 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | START InstallOperationsQueue ordered operations

    26/07/16 15:26:48:731 | [INFO] |  | OOBE. OF |  |  |  | 2179470 |   Adobe Lightroom_6.6.1_AdobeLightroom6 - mul 6.6.1.0 {2C8CD39F-7A83-5516-B0CA-71BA5E60E7EF}: operation to install

    26/07/16 15:26:48:731 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | END InstallOperationsQueue ordered operations

    26/07/16 15:26:48:737 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | Payloads were committed before the flight.

    26/07/16 15:26:48:737 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | Call pre-sessional custom Hook

    26/07/16 15:26:48:737 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | Operations START InstallOperationsQueue unordered

    26/07/16 15:26:48:737 | [INFO] |  | OOBE. OF |  |  |  | 2179470 |   Adobe Lightroom_6.6.1_AdobeLightroom6 - mul 6.6.1.0 {2C8CD39F-7A83-5516-B0CA-71BA5E60E7EF}: operation to install

    26/07/16 15:26:48:737 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | Unordered InstallOperationsQueue to END operations

    26/07/16 15:26:48:737 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | START InstallOperationsQueue ordered operations

    26/07/16 15:26:48:737 | [INFO] |  | OOBE. OF |  |  |  | 2179470 |   Adobe Lightroom_6.6.1_AdobeLightroom6 - mul 6.6.1.0 {2C8CD39F-7A83-5516-B0CA-71BA5E60E7EF}: operation to install

    26/07/16 15:26:48:737 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | END InstallOperationsQueue ordered operations

    26/07/16 15:26:48:821 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | Call the code to the custom action for the pre-installation for payload Adobe Lightroom_6.6.1_AdobeLightroom6 - mul 6.6.1.0 {2C8CD39F-7A83-5516-B0CA-71BA5E60E7EF}

    26/07/16 15:26:48:821 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | : TIMER: [operation payload: {2C8CD39F-7A83-5516-B0CA-71BA5E60E7EF}]

    26/07/16 15:26:48:822 | [INFO] |  | OOBE. OF |  |  |  | 2179572 | *=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*

    26/07/16 15:26:48:822 | [INFO] |  | OOBE. OF |  |  |  | 2179572 | Operation of the installer: PayloadInstaller

    26/07/16 15:26:48:822 | [INFO] |  | OOBE. OF |  |  |  | 2179572 | *=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*

    26/07/16 15:26:48:822 | [INFO] |  | OOBE. OF |  |  |  | 2179572 | Request to install the payload

    26/07/16 15:26:48:823 | [INFO] |  | OOBE. OF |  |  |  | 2179572 | Adobe Lightroom_6.6.1_AdobeLightroom6 - mul 6.6.1.0 payload {2C8CD39F-7A83-5516-B0CA-71BA5E60E7EF}: ARKEngine component of path Applications/Utilities/Adobe Application Manager/DECore/6/resources

    26/07/16 15:26:48:841 | [INFO] |  | OOBE. OF |  |  |  | 2179572 | Extraction of asset:/Users/username/Library/Caches/Adobe/AAMUpdater/AdobeLightroom-6.0/6.6.1/payloads/A dobeLightroom6-mul-210716042246/AdobeLightroom6-mul - 210716042246.zip

    26/07/16 15:26:48:841 | [INFO] |  | OOBE. OF |  |  |  | 2179572 | Affecting false in the unzipper file open option

    26/07/16 15:27:36:874 | [INFO] |  | OOBE. OF |  |  |  | 2179572 | All self-extracting assets. Number of assets: 1

    26/07/16 15:27:36:874 | [INFO] |  | OOBE. OF |  |  |  | 2179572 | CustomizedPatch property not found in the database

    26/07/16 15:27:36:875 | [INFO] |  | OOBE. OF |  |  |  | 2179572 | Begin the installation of payload to /Users/username/Library/Caches/Adobe/AAMUpdater/AdobeLightroom-6.0/6.6.1/payloads/AdobeLi ghtroom6-mul-210716042246/Install.db

    26/07/16 15:27:36:947 | [ERROR] |  | OOBE. OF |  |  |  | 2179572 | DS015: Cannot read the target of the symbolic link to the source file "/ Applications/Adobe Lightroom/Adobe Lightroom.app/Contents/Helpers/DynamicLinkMediaServer/application/dynamiclinkmediaserver.» app/Contents/amecommand.app/Contents/Dictionaries "Seq (30)"

    26/07/16 15:27:36:947 | [WARNING] |  | OOBE. OF |  |  |  | 2179572 | DW063: The ARKCopySymlinkCommand command failed. (30 Seq)

    26/07/16 15:27:36:947 | [INFO] |  | OOBE. OF |  |  |  | 2179572 | End of the installation of payload to /Users/username/Library/Caches/Adobe/AAMUpdater/AdobeLightroom-6.0/6.6.1/payloads/AdobeLi ghtroom6-mul-210716042246/Install.db

    26/07/16 15:27:38:161 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | * = * = * = * = * = * = * = * = * = * = * = * = * = * = * = * Operation completes. Statut : 2 = * = * = * = * = * = * = * = * = * = * = * = * = *

    26/07/16 15:27:38:161 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | : TIMER END: [operation payload: {2C8CD39F-7A83-5516-B0CA-71BA5E60E7EF}] took 49342 milliseconds (49,342 seconds) DTR = 14796 Kbps (14,4492 Mbps)

    26/07/16 15:27:38:163 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | OverrideFile specified user:

    26/07/16 15:27:38:164 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | The inventory of the csu was not updated for Adobe Lightroom_6.6.1_AdobeLightroom6 - mul 6.6.1.0 payload is {2C8CD39F-7A83-5516-B0CA-71BA5E60E7EF}, the value of the local var - 1

    26/07/16 15:27:38:165 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | Asking the pre-installation for payload Adobe Lightroom_6.6.1_AdobeLightroom6 - mul 6.6.1.0 RESTORE custom action code {2C8CD39F-7A83-5516-B0CA-71BA5E60E7EF}

    26/07/16 15:27:38:292 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | No operation.  We finished:

    26/07/16 15:27:40:302 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | Total number of installed components: 0

    26/07/16 15:27:40:302 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | Total components repaired: 0

    26/07/16 15:27:40:302 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | Total number of removed components: 0

    26/07/16 15:27:40:302 | [WARNING] |  | OOBE. OF |  |  |  | 2179470 | DW050: The following payload errors were found during the installation:

    26/07/16 15:27:40:302 | [WARNING] |  | OOBE. OF |  |  |  | 2179470 | DW050: - Adobe Lightroom_6.6.1_AdobeLightroom6 - mul: installation failed

    26/07/16 15:27:40:302 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | Call post-Forum custom Hook

    26/07/16 15:27:40:302 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | : TIMER END: [Total Timer] took 51895 milliseconds (51,895 seconds) DTR = 15131,4 Kbps (14,7768 Mbps)

    26/07/16 15:27:41:307 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | -------------------------------------- Summary --------------------------------------

    26/07/16 15:27:41:307 | [INFO] |  | OOBE. OF |  |  |  | 2179470 |  -0 fatal Error (s), 1 Error (s)

    26/07/16 15:27:41:307 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | The OSX version: 10.11.6

    26/07/16 15:27:41:307 | [INFO] |  | OOBE. OF |  |  |  | 2179470 |

    26/07/16 15:27:41:307 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | -Payload: Adobe Lightroom_6.6.1_AdobeLightroom6 - mul 6.6.1.0 {2C8CD39F-7A83-5516-B0CA-71BA5E60E7EF}.

    26/07/16 15:27:41:307 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | ERROR: DS015: cannot read the target of the symbolic link to the source file "/ Applications/Adobe Lightroom/Adobe Lightroom.app/Contents/Helpers/DynamicLinkMediaServer/application/dynamiclinkmediaserver.» app/Contents/amecommand.app/Contents/Dictionaries "Seq (30)"

    26/07/16 15:27:41:307 | [INFO] |  | OOBE. OF |  |  |  | 2179470 |

    26/07/16 15:27:41:307 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | Please find the error string above to find when the error occurred.

    26/07/16 15:27:41:307 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | These errors resulted in installer exit code mentioned below.

    26/07/16 15:27:41:307 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | -------------------------------------------------------------------------------------

    26/07/16 15:27:41:307 | [INFO] |  | OOBE. OF |  |  |  | 2179470 |

    26/07/16 15:27:41:307 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | Exit code: 7 - could not complete the silent workflow.

    26/07/16 15:27:41:307 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | Please see specific errors for troubleshooting. For example, ERROR: DS015...

    26/07/16 15:27:41:307 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | *=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*

    26/07/16 15:27:41:307 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | END - Installer Session

    26/07/16 15:27:41:307 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | *=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*

    Hi PDS,

    Thanks for sharing of the log file, it helps us to understand the root cause of the problem and help your best and fast, according to the newspaper shared the main error is 'Code output 7', I recommend you to try the solutions in the following link and share the results:

    Errors 'Exit Code 6' and 'exit 7 "Code install Adobe CS6, CS5.5, CS5, Premiere Elements and Photoshop Elements.

    Waiting for your response.

  • Need error cannot find /usr/lib/webplatforms/plugins/jnext/customPlugin.so library cannot be found

    Hi all

    I have created a native extension in the BB SDK 10.2 to connect to data services and request a server using the CellualarDataInterface API.

    It was packed, but when I run it in Simulator or device, it shows error:

    Need error cannot find /usr/lib/webplatforms/plugins/jnext/customPlugin.so library cannot be found

     

    I read that it is the link error but not able to identify the problem.

    Here's the URL where my BB 10 code example is hosted:

    http://www.filedropper.com/SampleApp (Go to this link and click Download this file)

    Please help me find the solution. It is very urgent.

    Finally, I solved this error by adding the network of Qt library.

  • Since the last nights update I get now launching explorer.exe "windows cannot access the specified device, file, or the path?

    Since update of last nights, I get now launching explorer.exe "windows cannot access the specified device, file, or the path?

    Hi Jemd3,

    I suggest you to completely remove Norton of the system using Norton Removal Tool and check if the problem persists.

    Method 1:

    Maybe it's that your computer is affected by virus and malware. I suggest you run an online anti-virus scan and a scan for Malware. See the links below.

    Microsoft OneCare:

    http://OneCare.live.com/standard/EN-US/3/default.htm

    Malicious software removal tool

    http://www.Microsoft.com/security/malwareremove/default.aspx

    Get a free PC safety scan

    http://OneCare.live.com/site/en-us/default.htm

    Hope this information is useful.

    Thanks and regards.

    Thahaseena M
    Microsoft Answers Support Engineer.
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • KB2628259 doesn't install, cannot create the directory or file. Anyone know of a solution?

    KB2628259 doesn't install, cannot create the directory or file. Anyone know of a solution?

    Hi dakota25,

    ·         Did you do changes on the computer before the show?

    ·         You are able to install other updates successfully?

    ·         You get the error message?

    Follow these methods.

    Method 1: Temporarily disable the security software.

    Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

    Method 2: Put the computer in a clean boot state to see if there is a software conflict as the clean boot helps eliminate software conflicts.

    How to configure Windows XP to start in a "clean boot" State

    http://support.Microsoft.com/kb/310353

    Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

    After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

    (a) click Start, run.

    (b) type msconfigand click OK.

    (c) the System Configuration Utility dialog box appears.

    (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

    (e) when you are prompted, click on restart to restart the computer.

    Method 3: You can also manually install updates (KB number) by downloading from the Microsoft Download Center.

    http://www.Microsoft.com/downloads/en/default.aspx

    Method 4: Follow the steps in the article.

    How to reset the Windows Update components?

    http://support.Microsoft.com/kb/971058

    You cannot install some programs or updates

    http://support.Microsoft.com/kb/822798

  • While booting XP machine, get error "the application cannot continue because it cannot find the uncdms.dll file.

    just after the start of the desktop windows appears and then I get the error message "the application cannot continue because it cannot find the uncdms.dll file" I searched using windows search, nothing helps.

    Hello

    · Do you remember all the recent changes on the computer before the show?

    · What is the service pack installed on the computer?

    Uncdms.dll file is associated with the Application of desktop search in Windows that is used to find and view an overview of the different types of files, such as documents, e-mail, photos and music files on a computer.

    By default, the uncdms.dll file is located in the folder C:\Windows\System32. The file is more common in 143 872 bytes.

    Follow the methods below

    Method 1:

    To uninstall the Windows Desktop Search from your computer, you must complete the following two tasks:

    Step 1: Remove Windows Desktop Search from the boot sequence

    To do this, follow the steps below:

    a. click on the start menu, click Run.

    (b) in the Open box, type msconfig and press ENTER.

    c. in the System Configuration Utility dialog box, click the Startup tab.

    d. search and clear the check box for any option that is related to Windows Desktop Search or uncdms.dll.

    e. restart your computer.

    Step 2: Uninstall Windows Desktop Search applications

    To uninstall the Windows Desktop Search using the Add / Remove Programs, perform the following steps:

    a. click the start menu and select Control Panel utility.

    b. double-click the icon Add / Remove programs.

    c. in the Add / Remove Programs, locate and select the Windows Desktop Search.

    d. press the button Delete.

    e. restart your computer.

    Method 2:

    Run the verification and virus scan online if any malware or virus detected on the computer activity. You can run the scan for viruses online from the link below: http://www.microsoft.com/security/scanner/en-us/default.aspx

    NOTE: Make sure that you select the correct version of the operating system before downloading the scanner)

  • When to install the old version of quicktime get error: an operation cannot be performed because a file handle could not be opened

    "On windows vista, that I am trying to install quicktime for windows 2.1.2 so I can run a program requiring but keep getting messages like" an operation cannot be performed because a file handle could not be opened.  Try to close applications or increase the number of files available (see order of FILES in your manual BACK". Or I receive QTINSTAL caused a GPF in module QT16 failure. EXE to 0002:5DA9

    Hello chris_660,

    You can check that the program that you try to run Windows Vista compatible by visiting the link below:
    Windows Vista Compatibility Center

    Also, you can try to run the program in compatibility mode and then check if the same problem occurs.

    Make older programs in this version of Windows

    Thank you

  • Problem with the library: need error cannot find /usr/lib/webplatform/plugins/jnext/libpushjnext.so

    Hello

    I have the application developed by WebWorks 2.0. After a year, I need to get the new version of my app, but when I install and run my application on the device, the application displays an error message:

    Need error cannot find /usr/lib/webplatform/plugins/jnext/libpushjnext.so

    I don't understand why I have this error, because the original version of my application works very well.

    I read a lot of posts on the forum but none of the posts helped me.

    The post office

    http://supportforums.BlackBerry.com/T5/Web-and-WebWorks-development/require-error-can-t-find-usr-lib...

    and the post

    http://supportforums.BlackBerry.com/T5/Web-and-WebWorks-development/deploy-WebWorks-app-into-device/... says I have to add the library. But I use only the push notification and push notification does need that com.blackberry.push and com.blackberry.invoked.

    Does anyone have any experience with the problem? Or does anyone have any ideas how to fix?

    onesto

    Hello chadtatro,

    Thanks for your tip.

    My problem was that I did not define cordova directory in the environment variable windows. When I added the cordova directory to the path in environment variables, my problem has been resolved.

    It is necessary to have a set of cordova in the command line in the case that your application uses a library of cordova.

    There are link setting cordova:

    https://Cordova.Apache.org/docs/en/5.0.0/guide/CLI/index.html#Add-plugin-features

  • Created native static lib included #include WebView not found other

    Hi, I need to create a Web inside a static lib.

    But after all new blackberry hiting project-> library-> static

    and in my CPC file I use #include but when I build the project I

    /Applications/Momentics.app/target_10_2_0_1155/qnx6/usr/include/bb/cascades/controls/webview.h:6:16: fatal error: QUrl: No such file or directorycompilation terminated.

    So I can't go from here, what am I doing wrong?

    I see that the compilation problem goes away if I create a library of stunts instead of a native...

  • When I run wic_x86_enu.exe on Windows 7 Starter, I meet "Installation cannot find what update.inf file needed to update your system.

    wic_x86_enu.exe

    When I run wic_x86_enu.exe on Windows 7 Starter, I meet "Installation cannot find what update.inf file needed to update your system.

    I had already run the windown update, the problem remains.

    Please help.

    Thank you.

    Hi YongWaiMan,

    You can run scanning of the file system [SFC] checker on the computer that will replace missing or corrupt files & see if you can download and run wic_x86_enu.exe.

    For more information, you can consult the following link.

    How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

    Hope this information is useful.

  • Cannot connect to the local file and print when the domain controller is not available because the network connection

    Hi all
    Having problems for local users, connection to a file and print server in one of my satellite offices.
    When my t1 connection is disrupted (problem of local carrier) my users when the connection is down to connect to the file room and print and always have access to their files and the local printer.
    The domain controller is off site in my main office.
    Environment:
    All local desktop clients are windows machines 7.
    Printing and local file is a windows 2003 server.
    DC is window 2008
    Note that we recently changed all 2003 to all domain controllers the PDC 2008, suspect that it may cause the problem, but just cannot know where it track.
    Any help or thoughts would be appreciated.
    Thank you

    Hello trj'hwma,

    Thank you for the question!

    It's discouraging to know that have problems you with the local file and print. As I understand well you cannot connect to the local file and print when the domain controller is not available because the network connection.

    The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums. You can follow the link to your question:

    Windows 7 IT Pro category

    Answer to us if you have problems with the local files and print or any other issue of Windows, and I'd be happy to help you again and try to correct the problem as soon as possible.

    Good day!

    Hope this information helps.

  • Problem with Windows Search 'Windows cannot access the specified device, file, or path. May not be the appropriate permissions for access you to computing.

    I have a very annoying problem:


    OT: Problem with Windows Search
    When I try to use Windows Search in the menu start I get the message "Windows cannot access the specified device, file, or path. May not permissions to access you the item. I get this message no matter what I type in. Therefore, I can't find something on my computer and continually to achieve this result.
    Could someone please help me solve this problem?
    I tried what answers I could find other peoples messages online, nothing helps. I'd appreciate any help.
    Thank you very much.

    Hello

    You did changes to the computer before the show?

    I suggest you try the steps from the following link:

    Error "Windows cannot access the specified device, path or file" when you try to install, update or launch a program or file
    http://support.Microsoft.com/kb/2669244

  • The Action cannot be performed because the file is open in another program

    I get an error after a few seconds of trying to move several files from my PC Win 7 for Mac OS Maverick, that there is a file already in the destination on Mac. This is true, but it was just put there because I copy over to the same action.  It reads 0Kb and wasn't there until I started.  Then I get an error: the Action cannot be performed because the file is open in another program.  Close the folder or file, and then try again...

    If I click on it a bunch of hold or wait, it takes about 45 seconds. I have to do with all the files, and it occurs when copying from PC to Mac.  PC-to-PC was never a problem.  I even rebooted both computers, so nothing is using all the files.  If I copy a file at a time, I get no error.

    So, I have a single file to not move, no problem.  If move 5 files, the first is fine, but it presents all 5 files in the folder at a time.  All the other files that the first show 0kb. I get the already existing for the error file, and select move and replace.  Can I get the Action cannot be performed because the file is open in another program.  I wait or click several times until it starts to move the file.  This file tells something then other than 0 kb.  When it's done, the error process starts all over.  In Mac, nobody seems to have any idea.

    Hello Ephraim,

    Please update us with the State of the question.

    I suggest posting your issue in our forum TechnNet.

    TechnNet forums that may help you better on this issue. Please follow the link below and post your concern on TechnNet.

    https://social.technet.Microsoft.com/forums/en-us/home?category=w8itpro&filter=AllTypes&sort=lastpostdesc

    Hope this helps you solve the problem, if any question you can write us and we will be happy to help you further.

  • Bad Pool Caller error (Windows 8) - including the link to my Minidump file

    Hello!

    I recently received 4 blue screens; the first three were probably related to Avast, so I uninstalled ( Memory_managementerror)

    Later, says error Bad_Pool_Caller
    I have already travelled through further discussion, so here is the link to my Minidump file
    Also, here are the results of WhoCrashed

    Thank you very much!

    (Local) information system
    computer name: KISS
    Windows version: Windows 8, 6.2, build: 9200
    Windows dir: C:\Windows
    CPU: GenuineIntel Intel (r) Core i7-3630QM CPU @ 2.40 GHz Intel586, level: 6
    8 logical processors, active mask: 255
    RAM: 21425922048 total
    VM: 2147352576, free: 1917325312

    Crash Dump Analysis
    Crash dump directory: C:\Windows\Minidump

    Dumps are enabled on your computer.

    Wednesday, October 29, 13 16:57:33 this computer crashed
    crash dump file: C:\Windows\Minidump\102913-8937-01.dmp
    This was probably caused by the following module: ntoskrnl.exe (nt + 0x7A040)
    Bugcheck code: 0xC2 (0x7, 0x11C1, 0x11AC6DA0, 0xFFFFFA8011AC6DB0)
    Error: BAD_POOL_CALLER
    file path: C:\Windows\system32\ntoskrnl.exe
    product: Microsoft® Windows® Operating System
    company: Microsoft Corporation
    Description: NT Kernel System &
    Bug control description: This indicates that the current thread is doing a bad pool request.
    This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
    The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.

    Wednesday, October 29, 13 16:57:33 this computer crashed
    crash dump file: C:\Windows\memory.dmp
    This was probably caused by the following module: gdi32.sys (GDI32! D3DKMTPresent + 0xA)
    Bugcheck code: 0xC2 (0x7, 0x11C1, 0x11AC6DA0, 0xFFFFFA8011AC6DB0)
    Error: BAD_POOL_CALLER
    Bug control description: This indicates that the current thread is doing a bad pool request.
    This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
    A third-party driver has been identified as the likely cause of the system error. It is suggested that you search for an update the following driver: gdi32.sys.
    Google search: gdi32.sys BAD_POOL_CALLER

    Wednesday, October 29, 13 12:15:41 CEST your computer crashed
    crash dump file: C:\Windows\Minidump\102913-13828-01.dmp
    This was probably caused by the following module: ntoskrnl.exe (nt + 0x7A040)
    Bugcheck code: 0x1A (0xFFFFF70001080000, 0x1C03, 0 x 5003, 0x1C0400003846)
    Error: MEMORY_MANAGEMENT
    file path: C:\Windows\system32\ntoskrnl.exe
    product: Microsoft® Windows® Operating System
    company: Microsoft Corporation
    Description: NT Kernel System &
    Bug control description: This indicates that an error occurred serious memory management.
    This could be a case of corruption of memory. The corruption of memory more often happens because of software errors in the defective drivers buggy, not because of RAM modules.


    The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.

    Wednesday, October 29, 13 11:42:59 AM GMT crashed your computer
    crash dump file: C:\Windows\Minidump\102913-23578-01.dmp
    This was probably caused by the following module: ntfs.sys (Ntfs + 0x40C90)
    Verification of error code: 0 x 24 (0xFFFFF8800ACAE0C8, 0xFFFFF8800ACAD900, 0xB50019060B, 0xFFFFF8800197C552)
    Error: NTFS_FILE_SYSTEM
    file path: C:\Windows\system32\drivers\ntfs.sys
    product: Microsoft® Windows® Operating System
    company: Microsoft Corporation
    Description: NT file system driver
    Bug control description: This indicates there is a problem in the NTFS file system.
    The accident took place in a standard Microsoft module. Your system configuration is perhaps incorrect. Maybe this problem is caused by another driver on your system which cannot be identified at this time.

    Tuesday, October 28, 13 18:22:31 GMT crashed your computer
    crash dump file: C:\Windows\Minidump\102813-13562-01.dmp
    This was probably caused by the following module: dxgmms1.sys (dxgmms1 + 0x263E7)
    Bug check code: 0x1000007E (0xFFFFFFFFC0000005, 0xFFFFF880049B53E7, 0xFFFFF8800975A4E8, 0xFFFFF88009759D20)
    Error: SYSTEM_THREAD_EXCEPTION_NOT_HANDLED_M
    file path: C:\Windows\system32\drivers\dxgmms1.sys
    product: Microsoft® Windows® Operating System
    company: Microsoft Corporation
    Description: DirectX Graphics MMS
    Bug control description: This indicates that a system thread threw an exception who did not catch the error handler.
    This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
    The accident took place in a standard Microsoft module. Your system configuration is perhaps incorrect. Maybe this problem is caused by another driver on your system which cannot be identified at this time.

    Conclusion
    5 dumps were found and analysed. A third-party driver has been designated to be the cause of breakdowns of the system on your computer. It is strongly recommended that you check the updates for these drivers on their corporate Web sites. Click on the links below to search with Google for updates these drivers:

    Gdi32.sys

    These accidents were related to the corruption of memory (probably caused by a driver).

    Run these two tests to check your memory and find which driver is causing the problem.

    If you are overclocking anything reset by default before running these tests.
    In other words STOP!  
    If you don't know what it means that you're probably not

    1-Memtest. (You can learn more about running memtest here)
    Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. Get it here
    Boot from the CD and let it run at least 5 or 6 passes.
    Remember, anytime Memtest reports errors, it can be bad RAM or a bad motherboard slot.
    Test the sticks individually and if you find a good, test it in all slots.

    If a well-known stick fails in a card mother slot but not an another is probably the slot.



    2-Driver Verifier (for full instructions, see our wiki here)
    Using Driver Verifier is a dubious proposition.
    Most of the time it will crash and it will tell you what is the driver, but sometimes, it will crash and will not tell you the driver.
    Sometimes it will crash until you can connect to Windows. If you can't mode without failure, then you will have to resort to editing the registry offline to disable driver verifier.

    I suggest that you first back up your data and make sure you have access to another computer so you can contact us in case of problems.
    Then do a system restore point (so you can restore the system using the functionality of Vista/Win7 Startup Repair).

    Here is the procedure:
    Go to Start and type "auditor" (without the quotes) and press enter
    Select "create of the custom settings (for code developers)" and click "Next".

    Select "Select individual settings from the list complete" and click "next".
    Select all elements EXCEPT FOR "Low Resource Simulation"
    Do not check to win 8 Concurrency stress test and the verification of the conformity of DDI, click "next".
    Select "Select the driver names from a list", then click on "next".
    Select all drivers NOT supplied by Microsoft, and then click "Next".
    Select 'Finish' on the next page.

    Restart the system and wait as he crashed to blue screen.
    Continue to use your system normally and if you know what are the causes of the crash, do it several times.
    The objective here is to get the system crash because Driver Verifier is stressing out the drivers.
    If it is not planted for you, then let it run for at least 36 hours of continuous operation.

    If you are unable to Windows because it crashes too early, try safe mode.
    If you can't mode without fail, try to use the system from the installation DVD restore to bring the system back to the previous point of restoration that you created.

  • Cannot open the RAMDISK IMAGE file MINIPE\WIPE.IS_ CAN NOT BE LOAD error Code is 7

    HELP PLEASE

    I forgot my windows password 8 Pro. Tried several programs Freeware - different product Code to these Apps - no work!

    A reset of password - but is fails (cannot open the RAMDISK IMAGE file MINIPE\WIPE.IS_ CAN NOT BE LOAD error Code is 7)?

    Do I have to buy a soft reset? Buy new Microsoft product key?

    I read somewhere that I can use regedit (run as administrator), but have no details. I thank all of you for your help since. I would really appreciate help with this or I'm screwed.

    Thanks again

    Hippie TOKE

    Hey Hippie,

    Microsoft technical support engineers cannot help you recover the passwords of the files and Microsoft who are lost or forgotten product features.

    Please click the link mentioned below on Microsoft Policy all lost or forgotten the password.

    http://support.Microsoft.com/kb/189126/en-us

    Answer please if you have any questions.

Maybe you are looking for

  • I can not add favorites

    Hi, when I try to bookmark a page the Add bookmark window does not come to the top. Firefox refresh solves the problem temporarily; However, at the next session the problem returns.

  • Looking for a cell phone show the decimal part of the quotient.

    Single sheet to follow the golf shots. Dividing the total holes by 18 to show you a trick. Round 9-hole course is 0. I can't seem to show that 0.5?

  • PXI Profibus interface

    I want to commuicate one module profibus PXI, who is having a serial port. Is it possible to send and receive data through serial communication? If this is not the case, what are the additional factors need for communication?

  • When I try to send emails via outlook express, I get the following error message:

    When I try to send and email using Outlook Express, I get the following error message: The connection to the server has failed. Account: 'HotHot', server: 'smtp.live.com', Protocol: SMTP, Port: 25, secure (SSL): Yes, Socket error: 10060, error number

  • System Restore will not restore

    When I try to restore to an earlier point (whether they are earlier today, or 1 months ago), System Restore tracks, restarts, and then he says, it cannot restore to the point and no change has been made.  How can I solve this problem?