ICE - client cannot get the option "on my computer"

Similar Questions

• Client cannot get the external IP of DHCP address through WiM

  WISN 5.2.178.0

  6509 12.2 (33) SXH2a

  WISN is in place, 1231 & 1131 joined APs, radio stations upwards, the customer associated but not an IP address.

  Virtual interface with vlan # & IP on the destination VLAN.

  WLAN with same vlan # as above.

  I tried Open, PSK, WPA. Client cannot obtain an IP address.

  What did I miss?

  You have the virtual address set to 1.1.1.1?

  Also, you have set up the address of the DHCP server on your interfaces VLAN? This is important because the controller basically uses an ip helper address to properly forward DHCP requests.

  If you have these configured, try to use the internal DHCP server to test. The web GUI, access controller-> the DHCP server in-house. Configure a DHCP scope and activate it (don't worry, it is only used for wireless clients. It does not meet the DHCP requests on your network).

  Now, go back to the controller-> Interfaces and configure the DHCP server to the management interface of the controller. See if your customers are able to get the addresses of the internal scope.

• have 2 admin accounts and it is impossible to get the option to remove one of them

  I created for the administrator accounts and cannot get the option to remove one of them. I want to delete that won't give me the option to delete all it will let me do is change the password, it says it will allow me to change the picture, but when I try blank on the login screen is displayed. I can't change it even for standard user if I am logged in under the account of other admin. what I want to do is get rid of all my accounts and re-created them correctly like the one that I can't delete will sometimes pop up for password when I want to install something when I am connected with the other account.

  Is it possible to reset all our and start from scratch? I think it happened when I made some changed account policy local when I couldn't get a regular with my admin account setup program and now I don't know how to cancel it.

  I do not have to reinstall windows just to get this problem resolved... There must be an easier way.

  Thanks in advance

  Brenda

  For the guest account - I have a little poorly stated.  You * can * remove, but it is not recommended to perform this (possible to unintended consequences.)  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-desktop/deleting-guest-account/5a116d33-0056-47CA-B51A-b6615b90e160

  Administrator account - as far as I know you just cannot delete the built-in one.  Whichever one you can NOT remove - who is integrated. * smile *.

  Rename you accounts?  If not - it is one called "administrator."  Alternatively, you can use a registry setting to understand - but really the name should give it (if you have not renamed - and even if he did you rename... You renamed, you must know what you renamed to) the description of the account should be, "the computer or to the domain administrative account '...

  At the end of the day - you must remove only the accounts you know * you * created.  Ignore the rest.  Windows is/has been / will probably always be a multi-user even system when it is used by a single user.  He has accounts that are doing things in the background at almost any time.  Better than to let them be - unless you like instability.

  Whenever you install something (attempt to) as a normal user, it should appear and ask you an administrative level account - but you can select 'other' and put in ANY account of administrative level on this machine, you know the credentials. ;-)

• Windows 2008 R2 as a guest cannot get the IP address of the server (VMware workstation 7.1.3 on Windows 7) professional

  Hi gurus,

  I installed VMware workstation 7.1.3 on my Windows 7 laptop professional x64bit and I can run my old VM (XP) without any problems in this regard. And I tried to install a new client (Windows 2008 R2 Standard x 64) on this subject, when I put the NETWORK card in the deck, he cannot get the IP address from my DHCP, always show me error "Windows has detected an IP address conflict...". ", I tried the IP static installation for her also, same result.

  I tried to install a new windows Server 2003 as a guest (also defined as a network bridge), it works very well, can get the IP address from my DHCP or can set a static IP address with no problems. Does anyone have a similar experience on this combination? Any solution to this issue?

  Best regards

  BUGBUG

  I recently managed to get bridge network work with a Windows Server 2003 R2 SP2 guest in VMW Workstation 7.1.4.385536 on a host Windows 7 SP1 Ultimate.

  VirtualBox 4.0.4.70112 is installed on the host and disabling the 'VMware Bridge Protocol' in the 'VirtualBox in Ethernet Adapter"on the host was necessary.

  Outpost Firewall Pro 7.1.0.3415.520.1247 is also installed on the host computer and I used some information from the link below to add some necessary firewall rules.

  http://www.agnitum.com/support/KB/article.php?id=1000061

• Can not good press the mouse on the name of the file and get the option of e-mail

  Can not good press the mouse on the name of the file and get the option of e-mail

  Hello! If I understand your question, you want to right-click on a file and attach it in Mail. To do this, click on the file with two fingers on the touchpad, or control + click on the file, select 'Share', then 'mail '.

  I hope this helps!

• Cannot get the password or re-establish the link. What should I do?

  Cannot get the password or re-establish the link. What should I do? Reset email is never sent. This master password"... How do you define? I'm locked out of Thunderbird. Help

  Maybe he's trying reset Pasword Thunderbird Master as I'm doing? I copy the code and paset in the console tools\error and press Evaluate. I wonder if I want to reset the Master PW and I say yes, then I get a saying that the Master PW has been reset. Maybe he's looking for an e-mail to tell him that the IPL has been rest to? But the problem is, nothing happens when the password has been reset, msg is sent. TB continues to request the password. I have not changed my PW and when I enter the good PW, TB does not recognize. And reset the PW Master does nothing but generate Pop up messages. It's very frustrating. The information in the help files are not accurate, or the code provided does not work although it generates messages indicating that the IPL has been reset.

• is it possible to copy "setup" (windows 8.1, office 13) for usb and transfer to XP where internet 8 crashed browser. I don't get the option to save the installation program

  I am trying to copy firefox USB of my laptop and install on the XP desktop according to the support forum: updated Windows Update then crashed Internet Explorer 8 on XP and now I have no internet connection on this computer (says error message unplugged)... I have windows 8.1 office 13 on my laptop. I don't get the option to save / download firefox run on the laptop, all automatic. Should I uninstall and reinstall? Maybe I can't transfer to XP in all cases. All non techno tips would be much appreciated. I spent many hours on it.

  This isn't the way Firefox is installed.

  Firefox 26.0 system requirements are here:
  http://www.Mozilla.org/en-us/Firefox/26.0beta/system-requirements/

  You must have Windows XP SP2 if you use Firefox 26.0.
  Alternatively you can use older versions of Firefox here:

  http://FTP.Mozilla.org/pub/mozilla.org/Firefox/releases/

  edited by a moderator - all older versions of Firefox are available from Mozilla, no need to recommend 3 websites of third party who may have "added features" to their download of Firefox

• Apple TV 4th generation-cannot get the Facetime in fashion landscape on my Samung TV

  Apple TV 4th gen TV OS 9.1

  When I do Facetime since my phone / Ipad and started airplay on my Samsung TV I cannot get the Facetime in landscape mode or mode full screen when I Flip horizontally Facetime.

  Only it shows vertical - left and right of the screen I see black spots. Is this a bug in the software?

  If you do not enable airplay after that you started to facetime and it runs in landscape mode?

• Cannot get the file to be imported.

  I tried the method of JoseIbarra - I did as suggested but cannot get the file to be imported in the services file. He never asked me if I wanted to add the information in the registry, so it is still on the office. Don't know what to do from here.

  Please stick to the initial conversation.

  Is this you speak of course (*first conversation*):
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-system/how-do-i-get-print-spooler-back-into-my-Windows-XP/ed014329-1bd3-458d-9C93-bbb306fc731f

  You also made this one:
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-system/print-spooler/c4610093-a96f-4476-B263-eecf5b8fc339

  (but please do not reply to this one...)

  And this one:
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-system/continuation-of-print-spooler-problem/0e885d7b-3e64-42ee-A248-9d9f2a8e26c5

  (Even once - keep the * first conversation * going.)  Written on it.  Show how this conversation continues spreading around.)

  BTW - my suggestion has not changed.  I still think that you get just around issues that still exist, probably, by fixing the little things you need at a given time.

  Backup important files/folders (for you) (including documents, photos, music, Favorites, Internet favorites, files installable application, serial numbers, product keys, spreadsheets, you saved to the desktop email, etc.) and wipe the disc completely - I'd even a zero writing on the disc (formatting) before installing the operating system from the original installation media.  Then install your applications and restore your files.

  As to what they were asked to do... Always seems that you saved the file as a *. TXT file and not a *. REG or there is much more wrong with your machine (see my suggestion above.)

  Visit this web page to look at the photo on the left (a first) to see the screenshot of the possible is the desktop icons and let us know if it looks like the left or right of each photo version (answer here or in the longer conversation.)  * Ignore the first part of the file name - as you might have named something else than "addspooler."

  To check if you saved incorrectly or if there is something wrong with your system (or two) - right click on the file you saved and choose 'Properties' from the menu you get.  Under the 'Général' tab, she said, "file Type: registration entries (.reg)" and "opens with: Registry Editor" or something similar?  Visit this web page to look at the picture on the right (second) to see the screenshot of the possible look at the windows of the property and let us know if it looks like the left or right of each photo version (answer here or in the longer conversation.)  * Ignore the first part of the file name - as you might have named something else than "addspooler."

• cannot get the keyboard to select windows xp when I have only four seconds to select is stuck on windows xp professional and cannot get the keyboard to use arrows to select

  cannot get the keyboard works when reebooting said cd I need driver sata when reebooting he gives four seconds to schrol up to windows xp but the line is highlighted on a windows xp profesional bellows and can't seem to choose windows xp on its own keyboard wont respond but lights from F1 or f2 f3 until f12 choose please help

  A few old machines will not recognize a USB keyboard/mouse until after Windows starts.  Look at the back of your computer and see if you have a PS/2 (round) connector for a keyboard and a mouse.  If you do, then you will need to use a keyboard with a round PS/2 connector or a USB-to-PS/2 adapter and plug the PS/2 connector on the back of your computer so that it recognizes the keyboard until Windows starts on your keyboard.

  The SATA driver applies to your hard drive.  A CD of start-up/installation of Windows XP does not recognize a SATA hard drive.  If you install Windows, you will need to hit F6 at the right time and insert a floppy with the SATA driver on this subject.

  HTH,
  JW

• I no longer get the option 'Extract' when right click on a zip file

  Original title: IE and Zip files

  Since the update to IE8, I no longer get the option 'Extract' when right click on a zip file!  Help!

  Original title: IE and Zip files

  Since the update to IE8, I no longer get the option 'Extract' when right click on a zip file!  Help!

  Use this tutorial:

  Support of ZIP files - restore

  http://www.Vistax64.com/tutorials/65254-zip-file-support-restore.html

  Also, I recommend to install 7 - zip.
  It is widely used and highly recommended. I personally use exclusively.

  http://www.7-zip.org/download.html

  Note: there is a download for 32-bit and one for 64 - bit. Make sure you choose one that suits.

• so I'm trying to download Microsoft Silverlight to netflx, but every time I click to install it I only get the option to save it and run it, how to fix this?

  so I'm trying to download Microsoft Silverlight to netflx, but every time I click to install it I only get the option to save it and run it, how to fix this?

  Visit http://forums.silverlight.net/>

  UTC/GMT is 03:01 on Friday, October 14, 2011

• I replaced a HP with an Epson Stylus all-in-one printer and cannot get the printer to print more than one page when printing from the computer.

  Original title: new printer

  I replaced a HP with an Epson Stylus all-in-one printer and cannot get the printer to print more than one page when printing from the computer.  The printer works fine when printing from a laptop or ipad!

  Start by going here--> http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?UseCookie=yes&oid=232591&prodoid=63099059&infoType=Downloads&platform=nodetect

  If the web page has not correctly detected your operating system, select it by using the drop-down list.  Rather than using the "Combo package" recommended but huge, expand the "Drivers" section and download driver printer v2.32 to a location that you will remember later.

  • Click on the ORB start and go into devices and printers.
  • Select (click) the icon of your Epson printer.
  • Once you have selected the printer, a button labeled "Print server properties" will appear in the toolbar.  Click on this button.
  • Click the "Drivers" tab on the print server properties dialog box.
  • Select the Epson printer in the list of installed printer drivers, and then click 'remove '.
  • In the context menu, select "Remove driver and driver package" and click OK
  • Click Yes, and then delete
  • Once the removal process is complete, restart the computer (probably not really necessary, but can't hurt)
  • Install the driver and the software using the file that you downloaded earlier

  At this point, your printer should work fine.  However, if you want the ability to print by emailing a file to your printer, you may need to install both 'Remote Printer Driver v1.65' in the category 'Pilot' and "v1.30 utility Configuration of printer Epson Connect" in the "Utilities" category

• I'm in the Mexico and can browse the web but cannot get the roadrunner site to open the webmail server to allow access to e-mail.

  I'm in the Mexico and can browse the web but cannot get the roadrunner site to open the webmail server to allow access to e-mail. I worked around it through another proxy server, but navigation is a pain. does anyone know a solution to this problem? Roadrunner denies that it doesn't clog and so did the modem service here which is telmex?

  [moved]

  I had the same problem 2 weeks while in the Mexico.  I contacted the support TWC and the person to whom I spoke said he had to unlock something.  When he did, all my mail came in Outlook in the spam folder.  It was OK because I got my mail.

  I moved to a different House and now have the same problem again.  I've contacted support TWC and not had much luck. The second level support person and I spent more than an hour, the call of the Mexico using Vontage.  He has not found anything by the previous call that guided him by setting this time.  He said that he would open a ticket and call me in the next 24 to 48 hours.

  Is it reminds and solves the problem, I'll post how it was corrected.

  Amigos audio!

• ERROR: Cannot get the size of the logical block for spfile

  Ran across the following error in the log of alerts for a the 2 node RAC database:

  ERROR: Cannot get the size of the logical block for spfile "+ XXXXXX_SYSTEM/XXXXXX/spfileXXXXXX.ora".

  Looked in MOS and found nothing.  Has anyone go through this before?  If so, what is the cause?

  Just received a resolution of Support from Oracle.  They said that this is a benign error and can be ignored.  Here is their answer to my SR:

  ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

  OK, after reviewing all that there seems to be no problem to fix. All configurations are correct. We believe that these errors are benign and can be ignored.

  COMMENTS

  ===============

  -L' ASM instance is online.

  -The Diskgroup: + XXXXXX_SYSTEM is mounted and has the physical and logical of 512 bytes sector size.

  -No error message in the alerts ASM journal.

  In light of the facts above, the message "ERROR: could not get the size of the logical block for spfile" seems benign and can be ignored.

  However, to avoid these messages, as a workaround, you can try creating the spfile pfile '+ XXXXXX_SYSTEM/XXXXXX/spfileXXXXXX.ora' and then try to create spfile diskgroup + XXXXXX_SYSTEM using this file pfile.

  ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------