In case of emergency Contacts

Similar Questions

• ICE (in case of emergency)

  Many organizations such as the Red Cross and the Police asked each person to include in its list of contacts of contacts ICE (In Case of Emergency) to be used in case of accidents and emergency situations. On the other hand, most of the people keep their iPhones locked by a password, so that even if the iphone were found in case of accident, ice contacts cannot be known.

  I suggest that a new icon "ICE" will be introduced into the operating system. This icon will be used to enter ice contact numbers, and these numbers will appear on the first screen which appears "slide to unlock". This allows the assistance in case of accidents to retrieve these numbers easily and communicate with anyone the iphone owner assigns.

  You can tell Apple directly on the link below.

  http://www.Apple.com/feedback/iPhone.html

• Problem of Medical ID health with emergency contact app

  IPhone 6: any attempt to add emergency medical Ref. contact. It goes to my contacts but they are grayed out and unselectable. What's wrong?

  Another poster had a problem with the addition of people who were in their favorites. If Yes, try to remove the person from Favorites, adding an emergency contact and then adding them to Favorites.

  What type of account, your contacts are synchronized on? iCloud? Gmail? Change?

• List of emergency - Catcher - Custom contacts Please Help

  Hi all

  I work with public safety and want to push back the application of the list of the emergency calls to BlackBerry smartphones in order to communicate in an emergency. Currently I do a push channel browser for devices. However, it is just a temporary solution, because the information is saved on memory cache of BlackBerry and disappears after a period of 12 to 24 hours. The plan is to install the Custom of collecting on the devices so that it can capture contact information and save it permanently on the device.

  So far, I downloaded the Emergency Contact List Sample Application. Also, I installed the ECLContactList.alx app for the old version 'Tree list UI' on my BlackBerry (using the Desktop Manager), and it worked very well. However, I really want to install the new version of view 3 inch screen, but when I try to install on the BlackBerry I get a message "this application is not compatible with your device and can not be added" .

  Anyone know what the problem might be or what I am doing wrong?

  Additional information:

  I have no experience in programming (some exposure only)

  Version blackBerry 8830 4.5.0.138

  Desktop Manager 5.0

  Exchange 2003 SP2

  SQL Server 2005

  BES 5.0 (in the case where you need)

  THANKS in advance for your help...

  You could give a glance to the section API Doc and category, if it is mentioned as signed, you must sign the application to run on the real device.

• Contact information of accessible emergency since iOS 10 lock screen?

  First responders can access emergency on my iPhone contact information if I am not aware to unlock?

  Hi, wtimberman!

  Thank you for using communities Support from Apple. After reading your post, I understand that you are wanting to know how your emergency information can be found if you are not able to unlock the iPhone. Knowing that someone else would be able to get important medical information and emergency contact on you are certainly a reassuring element of iOS, and I'd be happy to help you!

  The customer article below implemented Medical ID, and how this information is available, even if you are not able to pull yourself up.
  

  Set up your medical ID in health app on your iPhone

  Article, here's how your information is accessible after you have your medical ID set up:
  

  Make an emergency call and access Medical ID

  If an iPhone has a medical ID, you can view medical information of emergency on the device or make an emergency call. To view the Medical ID, open the health app tap Medical ID. If the iPhone is locked, follow these steps:

  1. Press the Home button.
  2. Emergency valve.
  3. On the emergency call screen, you can make a call or tap Medical ID to display medical information of emergency stored on the device.

  

  Have a great day!

• What are effective ways to merge the duplicate in the iOS Contacts? I have thousands of duplicate contacts and mosta cases there are dozens of identical entries.

  Hello

  I've generated many Contacts duplicated in iOS and Mac OS X.

  In most cases the input Contact is copied dozens of times.

  I would like to remove n - 1 contacts identical and, if possible, merge the contacts with the same name + email address + telephone number.

  Can you recommend a few applications that are designed to accomplish these tasks?

  Can you suggest reasons why copies of contacts have been generated?

  Whatever the reason, copies can still be generated. Then, I also need to resolve the first cause.

  Thank you.

  You do not want to do it on your computer... not on a less recommended small device such as a phone.

• How can I change that contact appears when the e-mail?

  I have more than my wife's iPhone Contacts listed under his name and surname.  I also did a called ICE (emergency contact) so numbered. Whenever I want to send him a message and begin to enter the name or number, ice shows up instead of its name. Is it possible to change things so that his name appears instead of ice? (If it's important, his name starts with Y and his last name begins with H)

  May I suggest another approach?

  Like you, I wanted to make available ICE contact in case it is needed.  For years, I had an iPhone app specifically for this purpose.  However, since iOS 9, there is a new effective way to do it.  If adapt you this method, you will be able to provide much information on the ice if you want (things such as the number of telephone of the doctor, medications, allergies, etc.) and you won't have an ice entry in your contacts list.

  Please consider this option.

  Set up your medical ID in the application of the health on your iPhone - Apple Support

• Contacts disappear

  Hello

  I just got the Sony Xperia Z3 a week ago. First time using Android. Happy so far.

  But there is a serious problem: my contacts several times all just disappeared from the phone. It happened again just now. I clicked on the icon for contacts, and I could see the contacts disappear quickly, and now I find myself only with:

  * ICE - in case of emergency

  * Me

  What is going on?

  Settings-applications-all-phone, force stop and erase the data. Do the same for the contacts app. Restart your device.

• A certain time out loop that depends on the other a case structure.

  I did a lot of research on this subject and I think that I reduced the precisoucly of the problem. I want my user to enter a password, and if the password is correct the alarm does not sound. But if that's a mistake, I want the alarm to sound. The problem is that I have no way to tell the alarm to stop the sound when the user enters because the sound is locked in a while loop . I can't seem to do this then that stop the loop for some reason when the user enters a new number.

  I would be very grateful to you, the Aboriginal people if you could help me out here. On the VI I said where is the problem. (The problem occurs inside while loop).
  If you guys have any questions please let me know and I'll try to answer them to the best of my ability.

  All entries for the while loop that are outside of the loop do not change after you enter the loop.  So if the first loop has a 'fake' wired into it, which means not to stop, he will never stop.

  You will need to have something out there that reads a new value every time.

  I must say that it looks like the structure of your program won't work, however.  The structure of the event above can shoot outside while occurs only once each time the large loop, so right now he can never more touches after a 'real' in case of emergency structures, enroll you in the lower part of the block diagram.

• Contacts of Smartphones blackBerry not accounted for SMS if battery removed

  Hello.

  My Bold 9700 is not properly recognizing the contact person for SMS messages. But it's a different problem that others have described. When I receive a message, it shows the name of the contact properly (which was the other problem had I think).

  But then if I turn off the bb and remove the battery, then replace it and re - turn the phone on, none of the SMS messages have contact names appropriate - it just shows their phone number or their name if I stored them on my SIM. What's more, this problem only occurs if the contact phone number is stored with spaces and media in [that is to say, + 64 (21) xxx xxx].

  I realize account I could cross and all add to my SIM card or remove brackets and spaces of phone numbers of contacts but

  (a) it was not a problem before (on the 8310 and 8520) must be able to be fixed

  (b) my SIM card does not in any case all my contacts

  (c) telephone numbers are difficult to read without spaces and media

  (d) it is such a waste of time!

  My software version is 5.0.0.344 (which is in fact more late than I can download!)

  Thank you

  Yes, it IS the same problem that others had on the same version of operating system you are on. Exactly the same thing.

  The official release to most recent update of the operating system solves this problem.

  Download and instructions are in the link here, do a full backup first of all, with the Office Manager.

  http://www.BlackBerryForums.com/General-9700-series-discussion-bold-2/214748-latest-OS-9700-5-0-0-68...

• If our lead scoring model uses a date field, what happens if a contact has a later date in this area?

  Our model way of notation uses a field of date for one of its criteria. In the event that the date field is populated with a date in the future (as the rating is based on recency) how the lead rating model would deal with it? For more information, the current lead score measures the date as a "in the last (period of time).

  In the last x period will always look like in time in the past, so in the case that a contact does not meet the specified criteria, they will not get marked with this particular rule.

• Contact management - retail

  I have read a lot about the overviews and how-to sections. All were helpful and led me in the right direction with the difficult task to find ways to clean the House when it contacts. I have a few questions, however, that no one was able to answer specifically enough so I that I can move on with my task.

  Some information:

  • I am a new employee with Eloqua full administrator permissions
  • Nobody seems to have any idea how programs/synchronization/etc. have been set up with our Eloqua installation
  • There is no current documentation on how or if the contacts are never purged, which leads me to believe that since they integrated Eloqua contact list has just been more and more until he reached more 600 000

  So now the questions!

  1. Is it possible to see/access, which is set up in Eloqua regarding synchronizations, without having to search all parameters.
  2. Eloqua maintains documentation of the original set ups that you can consult?
  3. What is the best way to purge the global contacts cancels his subscription and make sure that if they fill out a new form they will not be allowed in our campaigns? Since then, some of them cancel his subscription may be political years of the old and the new Government can get them to pick us up, we want to find away around having to manually deal with this aspect: "If a Contact had a status of no Bounceback or at the time of deletion, re-created Contact record have the same status, which will have to be reset before you can send any email."
  4. Y at - it a program or a way to start automatically purge the contacts that we consider inactive or dead ends after execution of re-engagement campaigns? If so, the specific details on how to put in place that would be greatly appreciated.
  5. How download (lists as MDR) count in the Eloqua database? He doesn't know the contacts that have the same e-mail address? Is - this information such as titles, companies, automatically updated?

  Any info is welcome!

  Sorry for the late reply, Danielle, had a big time this week.

  Thus, in the doc actually remove chronogram Eloqua you create a filter shared to unsubscribe and hard Bouncebacks which get used then as a driver to your program 'Mark the remove from Eloqua Box' in the program generator. But we wanted to go further and remove contacts more that showed no activity.

  I then created another segment with filters for various criteria such as:

  • contacts with any form of support and visits the website of July 2012 or earlier
  • contacts with email addresses hotmail or yahoo without activity from July 2012 or earlier
  • where comes in contact with lead Original Source = pre-Eloqua without activity from July 2012 or earlier

  We are a B2b company and our sales cycle is about 6 months, so we didn't want to get rid of someone who was more recent than that even if they had of weak activity. And the reason why we targeted because yahoo and hotmail e-mail addresses that in many cases, that these contacts would not convert into customers, people would just use it to get our free trial but to take no action after that. You would have to do what makes sense for your business.

  So to go from there, I would export a list of contacts for each of these filters and randomly take 5-10 and check them in our CRM to see if they were really inactive. Then I would add them manually to the program "Mark the remove from Eloqua Box" by going to the members > add members to the program and then select my shared list. This manually adds the program only once. If you are comfortable that the data are correct and that you want to automate, you can add your new filters as feeders. All this will make more sense once you set up your own program. It didn't for me, until I went through all the steps.

  So far, it works pretty well for us. If you have any other questions, I'll be happy to help if I can.

• Player card on the satellite A110-252 issue

  Hi - I'm in a good spot of bother with my satellite A110-252, I bought at the end of the summer 2006. He executed a lot for all this time and I have taken good care of the machine.

  However, today, I fear I might have accidentally destroyed the machine. The laptop has a card reader all-in-one, located on the front, above the hard drive and next door the status lights. Next to the drive are the symbols of the cards SD, XD and Memory Stick from Sony. I assumed the reader would be my 4 GB Sony Memory Stick Duo, but too late, I realized that my memory stick has been among the most recent, smaller, and it is now stuck in the slot.

  Restart the computer, Windows fails to start (I'm typing this from my Linux partition, which I use in case of emergency), and when trying safe mode starts it crashes on 'getio.sys '. The light on the card reader flashes and flashes constantly when Windows tries to start. This suggests that the stick stuck is to interrupt the boot - the system tries to read the map, but because he crashes against the pins it screws to the top of the boot process.

  Is there a way to get around this? I could disable the card somehow, either via the software reader or physically? Any suggestion would be appreciated because I very strongly dependent on the my laptop Windows partition.

  Hello

  Check the BIOS settings and try to change the order of boot to HDD ODD FDD LAN or something like that.

  But why you n t contact the technician of laptop (ASP in your country) and request the removal of this card is not compatible?
  You should definitely do this.

• nothing works under my user account

  Dear Microsoft Answers

  I have a laptop Windows Vista Home Basic, I had last year, and it works fine. and then 2 weeks ago all the small problems begin to surface. and for the past 2 weeks, I tried to understand what was wrong with my computer. First, not 'IE, Google Chrome, Firefox' internet browsers allow radio stream; Secondly, I have been unable to sign in MSN Messenger, it keep giving me the error code 80070005. Thirdly, my Adobe Acrobat gives me error messeges that tells me the program must close; and fourth, everytime I open Internet Explorer, it ask me to put a default search engine... be frustrated by all the error messages, I contacted Windows Live Help Center and the assistance of the radio station, they could not understand what the problem was, so finally they sugguested connect Vista with a different user account so I tried with the guest account and everything works fine. but when I connect my personal user account, all the problems are back. I guess that means that my user account creates all the problems, I'm the only one using the computer, and my personal user account is also the administrator. can you help me to find the problem and I hope that to correct them?

  Thank you very much

  icebb

  Your administrator user profile can are damaged.  To fix this use http://windows.microsoft.com/en-AU/windows-vista/Fix-a-corrupted-user-profile.  If that is the only available Administrator Profile (you need to be an administrator to fix this), enable the Hidden Administrator Account (HAA) using http://www.microsoft.com/communities/newsgroups/en-us/default.aspx?&lang=en&cr=US&guid=&sloc=en-us&dg=microsoft.public.windows.vista.administration_accounts_passwords&p=1&tid=d20f9db4-7b2c-48be-a087-7835dc2a9055&mid=d20f9db4-7b2c-48be-a087-7835dc2a9055.  If you don't remember the password, try nothing because that's probably what you (or seller) did during the installation.  In addition to the replacement of an administrator account, you must create a second administrator account (in case of emergency like this one) and a standard user account for your daily activities (for security reasons).  Once that is done, don't forget to disable the HAA to save it in case it is necessary once again and for safety reasons (since people often try to hack into systems using this account).  Do NOT use the HAA as your administrator account because if you lose the only administrator on the system account or it is damaged again, then you're watered.

  Good luck and I hope this helps.

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Notification of space low disk on Windows 7

  I use Windows 7 Professional. My "C:" drive is 683 GB. My RECOVERY unit 'is 14.3 GB 14 GB is used prompting a warning message on "low disk space".

  I just finished installing WXPM in order to run some older software through Windows Virtual PC. The default installation location, which came during the installation of Windows XP Mode is D:.

  Should I have installed Windows XP Mode to my C:? If so, how can I move it?

  or

  Can I extend my D: RECOVERY to run my software in XP Mode? How can I do this? Or is the recovery just in case of emergency?

  Thanks to anyone who responds... I got this great support from so many good people through these articles and forums! It is therefore encouraging :-)

  Hello

  You should never change the size of your recovery Partition, or add files

  Your recovery Partition was photographed on your hard drive during the production of your computer by the manufacturer for all of these reasons.

  1. If you want to reinstall Windows from in the case of a failure of the system, based on individuals or the keys at startup.

  F10 or Alt + F10 or F11 are a couple of different manufacturers use sequences.

  You will need to ask your manufacturer for proper sequence.

  2. to make the recovery disks on if your drive hard breaks down, so that you can then reinstall the operating system on a new hard drive.

  Also ask them how to make records.

  Your D: Recovery Drive is should not be used for backups, defragmented, etc..

  There are backups on an external hard drive.

  To resolve the problems that have arisen with the recovery D: Partition, you will need to contact the manufacturer of your computer to remove all that has been added to it.

  See you soon.