Iconia W510 which is available to default partition factory?

Similar Questions

• Are there 3 partitions in iconia W510 win 8, primary, restoration and mbr partitions?

  Are there 3 partitions in iconia W510 win 8, primary, restoration and mbr partitions? I'm freezeups and other defects. I tried recovery and saw what looked like 3 partitions. tried to format the C: drive then tried to reload the dvd.still system's glitches and lost 2 partitions I think. The dvd system to recharge the three partitions, I see only a concert now about 15 of 32 GB HDD?

  There should be three partitions, there are questions that may appear if you try to use the reocvery disks without removing all three first. Since you are in the State in which your old system went to format C, just wipe the rest of the partitions off the power and run the DVD for a reboot to the original. It will create the partitoins suitable for you. Once everything is back now you can search here for suggestions about deleting the recovery partition (if you have several gigs in size) in order to free up space, because this partition is not necessary if you have the recovery DVDs.

• Iconia W510 and Windows 8.1 RTM

  Hi, I tried to install Windows RTM 8.1 x 86 US of the official ISO image of Microsoft on my W510 Iconia (created the bootable flash drive), the installation worked, but the problem is that a lot of missing drivers or not after the initial installation.

  I tried to apply the latest pack of pilot of pilot site of Acer, which is designed for Windows 8, but after restarting that the Tablet is most likely stuck in infinity driver GPU reboot loop, all I see is black screen and start bar blinks every second.

  So the question is how to do a clean install of Windows 8.1 GTR on Iconia W510? Or should I wait until the correct driver pack for Windows 8.1 is out?

  Thank you

  I just want to jump in to clarify, Windows 8.1 is not released to the public and we don't post drivers or provide support for the operating system until it is officially released by Microsoft. Pilots and other media will be available on our support to http://www.acer.com site as soon as they are available after the launch.

• Z580 i5, 500 GB with no windows 7 - default partition size.

  Hello everyone.

  I spent the last 3 hours of googling and reading this forum especially for all information on the system of the okr and the size of the partition.

  unfortunly, I wasn't aware of the importance of the drive d partition and I wiped it and it has merged drive c.

  After a few experemiting with the sizes of the partitions, I was able to use the okr system and create a back up of my system (windows 7 ulitmate). However when I try to use the back up to restore my pc it says that I can't move forward because the size of partition is not default.

  I want to know is what was the partitions by default in order to get the okr system works properly.

  If any lenovo emploey can check the z580 with 500 GB model, with no partitions windows 7, I will be verry gratefull.

  I remember that I got 4 partitions at startup:

  1. no system of labels with boot partition files (as I remember it was 29-30 gb)

  2 C drive - with close to 400 GB.

  3. d-arround 30 GB drive (used for the lenovo system okr I think).

  4. last disc is 1.5 GB with some software from lenovo.

  Please if any1 buys a new Z580 500 GB, pls write on this thread what was your default partitions (exact size + type of partition: fat32/ntfs etc.).

  Thanks for reading and I hope that a good person can help me cope with this problam.

  OK, after much reading on the forum here, I was able to find a some1 post, which was close enough problam as I had and I did as he suggested, and it worked.

  Allow me to explain people what I did for any1 who could be on the same problam like me:

  first of all, let me say what I had at the time of the problam of partitions:

  1. with no label - system partition (containing the boot system files) - used to be 29 gb.

  2 drive c-400 GB (location of windows 7).

  3. d-ntfs partition 29,32 gb drive

  4 lenovo-part - partition (hidden, and btw I have not touched it since I baught pc) 1.08 GB.

  what I've done is pretty simple:

  1. I reinstalled everything first OKR disc system I got with the pc.

  2. with a partition management program, I deleted the d drive partition and gave all its space on the system partition.

  what I once changes is therefore:

  1 partition-arround 60 GB system.

  2 drive c: 400Go

  3. lenovo-part 1.08.

  Anyway, at this time, I was able to create my system restore by using System okr but also to recover using the recovery at startup mode.

  hope this helps any1.

• Iconia W510 is not compatible with Windows 10

  My 64 GB Iconia W510 runs all the latest drivers and updates available from Acer and Microsoft.

  I have the app get 10 Windows in the taskbar and planned to upgrade. When I check the compatibility of Windows 10 within the app, it says that my PC cannot install Windows 10. It says "Intel Graphics Media Accelerator - display will not work.

  Other users Iconia W510 know the same and what is Acer boards?

  After I started this topic I received an automated e-mail to the Board asking if she has not resolved since I got a lot of responses. No, it wasn't - but it is now.

  I applied all updates from Windows Update and now the app get Windows 10 says my W510 Iconia is compatible. Update problem solved. I am aware that there is still certainly a lot of things that need to be corrected with Windows 10, but the specific problem on this issue has been resolved.

  I thank all those who contributed and repost the link to ACE padgett for his answer to how to change the driver once the upgrade to Windows 10 is done:

  http://community.Acer.com/T5/Windows-tablets-and-convertibles/w3-amp-W510-Windows-10-amp-Intel-DPTF/...

  Since MS now "reset" the W510 for Windows 10, I guess it will be soon added to the list of supported Windows 10 units Acer.

• No image with customized image of Windows 10 Acer Iconia W510

  I'm trying machines Acer Iconia W510 image with an image of Windows 10 we did. We have already photographed a few tens of individuals. A dozen, however, refuse to take the picture. They are currently on Windows 8. The image on an external hard drive that plug us into the USB port.

  The steps I take to the imaging process are as follows: "Change PC settings"->"update and recovery"-> "recovery"->"Advanced startup" and I click on the button 'Restart now', who sends me to a screen with three options, continue to windows 8.1, troubleshooting, and turn off your PC.

  I select 'Troubleshoot '->' Advanced'-> "Image system recovery"

  The Acer screen appears with "Preparation of the system image recovery" at the bottom. I sign in the administrator account when prompted to choose an account.

  A window appears and scans for images. I selected the "Select a system image" option and then select the correct image of Windows 10.

  Then, I select the only available option for "select the date and time of the system image to restore.

  After that, there is a message that says "for the restoration of this computer, needs of Windows to format the drive that the Windows recovery environment is running on." To continue with the restore, shut down this computer and it boot from a Windows installation disc or a disc repair system, then try the restore again. "At this point, I have no way to continue.

  Even if I plug the USB recovery drive we used, I get the same message. I don't know what the problem is or how to get past. Any help is appreciated!

  Hi Ryan,

  According to the description, you can not install updates and the this issue may occur if one or more of the following conditions are met: 

  1. The Windows Update database is damaged.
  2. Antivirus software is configured to scan the folder % Windir%\SoftwareDistribution.
  3. Service (BITS) Background Intelligent Transfer Service does not receive a content link header.
  4. A required system file is incorrectly registered.

  Try it out below mentioned methods and see if it works for you.

  Method 1

  First of all, I suggest you run Windows update troubleshooting tool to get the problem automatically detected and corrected. This fixit checks the configuration of the Windows Update components and repairs, fixes incorrect Windows Update the locations of data and records of necessary services. For the race, the troubleshooter refer to sub article what can I do if I have problems to install updates.

  Windows Update: FAQ

  Method 2

  I suggest you to check if you are able to access Windows Update services and also make sure that the following services are started. If it is not started, follow the listed below as follows:

  a. press the Windows key + R, type "services.msc" (without the quotes) in the Run dialog box to start, and press enter.

  b. Locate the Windows Update service.

  c. right-click on the Windows Update service and select Properties.

  d. in Startup type, select enable.

  e. click Start under Service status.

  f. click OK.

  g. Repeat steps c to f for the following services :

  CSP & Background Intelligent Transfer Service.

  If these steps do not help to solve the problem, you can proceed to the step below and check.

  Method 3

  If the problem persists I suggest to reset the Windows Update components and for this, try to run the fixit described in the following article. If you already tried the fixit even before that I ask of you rerun the fixit.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058/en-us#LetMeFixItMyselfAlways

  Keep us.

  Kind regards

• Acer Iconia W510 | Demotion in Windows 8

  I upgraded my Acer Iconia W510 at 10 Windows Tablet a few months ago. It was supposed to be all very well and all that, but when a month passed, funky things began to happen.

  -The Tablet would break streaming

  -Taskbar is almost always does not

  -Entry is very slow and registry keys after 5 seconds.

  -Graphics drivers are not compatible with Windows 10

  I would like to go back to windows 8, but all windows.old and all other windows 8 file was deleted...

  10 Windows will not let me downgrade, because it has been more than 10 days that I used it.

  Is it possible that I can downgrade to Windows 8, or am I supposed to stay with a piece of a $150 of junk?

  In your win8 device, you can create recovery media that will help you to re - install win8 in win10 machine, if the recovery partition is still intact.

• Iconia W510: Register a new product has failed.

  I get a message (the serial number is not valid) to try the new registry Iconia W510.

  The main advantage is to have your machine on file in case there is anything you need to know or if you need to contact support.

  One of the problems with pills is generally that when computers in desktop computers laptops/computers laptops/netbooks used to have s/n and SNID (and the Windows license keys) on stickers on the underside or back, that are not visible on the shelves (at least W3 and W510) and exist on the box or by electronic means.

  This means that if you have a problem that prevents the boot you have no way to identify the specific Acer device.

  OTOH if you are registered, all this information is preserved.

  I do both: Save and keep a copy of the label of the box.

  The interesting thing is that I had a lot of laptops over the years, including five from Acer and everything works always including a 4.77 MHz dual floppy "luggable" - what happens when you live in the same House for thutty yar.

• Reboot Acer iconia W510 problem

  Every time when I start my Tablet (Acer Iconia W510) after the password a message saying something like a reboot is necessary due to some problems (the message and the Tablet works very well after that and I have not noticed any reboots after the password, but maybe before).

  In any case, the message said that the problems exist in the following files

  C:\Windows\Minidump\063013-12703-01.dmp
  C:\users\helja\appdata\local\temp\wer-31921-0.SysData.XML
  C:\Windows\MEMORY. DMP

  Also during the installation of some programs or updates and if the restart is required after installation of the tablet to the first encounters a problem and fails to restart at first but can solve the problem and Tablet so far started normally. (only a message that there are reboot problems but no precise information on the nature of the problem is given)

  Hi Kari,

  Thanks for the update.

  Sometimes, between the uninstalling and reinstalling software/drivers, it's a good idea to run the Windows Disk Cleanup utility. The disk cleanup utility to free disk space by deleting unnecessary files from your computer.

  Please consult the following link and remove some unwanted files:

  Delete files using disk cleanup
  http://Windows.Microsoft.com/en-us/Windows/delete-files-using-disk-cleanup#delete-files-using-disk-cleanup=Windows-8

  Please get back to us with the State of the question.

• What is the latest version of Premiere Pro, which is available for Mac OSX Yosemite?

  Hello world

  We have yosemite of Mac OS x installed on some laptops. When we try to check the latest versions of Adobe Premiere Pro, we are only able to install Adobe first Pro CC 2015 version 9.0. What is the latest version of Adobe Premiere Pro, which is available for Mac OSX Yosemite?

  Thank you

  It would be 9.2.0 (build 41)

• Iconia W510 win 8.1 no HDMI and no USB Tablet

  I have a 510 Iconia I put far to 8,1 win via the link on the App Store. The PC has all updates from Windows Update. I have instlled driver Acer 3.02 package (1176 graphics display driver). Goes the same for the BIOS, which is the most recent available.

  My problems are:

  1. no HDMI. It is quite dead. It is not the poster, I connect. Inuts HDMI on the tested screens and cables work with other devices, so the problem is with the W510.

  2. the USB port on the tablet itself is also dead. No matter what I connect it's nt power up / appear in the Device Manager/Explorer.

  Everything works as it should.

  The two ports are used occasionally, it can so be that they have never worked with Win 8.1. Are there known problems, something that I'm mssing or should I fixed it (still under warranty)?

  Thanks in advance!

  Boy, I'm leaning towards material now. Although it is possible that there is a software switch to turn the unit off I can't think of any reason he would have hit the USB or HDMI connection at the same time. Material could be the entire 5V circuit, since the motherboard components use lower voltages these days...

• Stereo mix on Iconia W510?

  I like to listen to music from my Iconia to my office. Using VLC for this. My office has a hidden feature called stereo mix and that I can listen to music, but I want the reverse.

  I can't find Stereo Mix on my W510 Iconia. Last updated drivers etc. Cannot find anything on Intel support.

  Suggestions, ideas?

  A response to my own post, so that Google knows and remembers my solution. I found the recorder screenshot here: http://sourceforge.net/projects/screencapturer/files/ which is part of this download: https://github.com/rdp/virtual-audio-capture-grabber-device . For audio is not a separate download, it is associated with. It's not Stereo Mix as I know, it will not be displayed in the devices, but it adds an extra entry in VLC, which can be listened to. In fact, two additional entries, one for the video (named screen recorder-capture) and one for the audio (virtual-audio-capture). It is related with Volume control, so there is no separate Volume for this. You must connect a headset to mute the sounds. Forget the actions of CMD, no idea of what they are doing and I have no need of them. Just after installation, the "peripheral" is ready to be saved. VLC is pleased to listen to the audio on the internet once the router has Port Forewarding defined. I could test the stream on my LAN, I could not test me on WAN (due to port forewarding). A friend was so kind to test this, my stream works. With the help of Mixx DJ.

• Touchpad Iconia W510 turns off when the battery dies

  I know this isn't the best subject line, but he described a kind of my problem.

  My W510 Iconia came with Win 8 when new and then the empty Tablet two batteries so that I could use the touchpad for as long as I could use the device. Drained the battery of the keyboard first of all, there's enough juice to keep the touchpad and keyboard work and then switched to the battery of the tablet. When I closed the lid it load the battery in the keyboard shelf. Neat.

  When I upgraded to 8.1 win he has changed so that it now would drain the keyboard battery almost completely and thus stops the touchpad. Sill keyboard works, however. Is not treated, it is a step backward and very annoying.

  This turns a laptop very versatile and ergonomic for a tablet with a keyboard for about 50% of his total time of battery, which is a long time for this device. The only way using the touchpad is to charge the battery of the keyboard more than x % (when it is unplugged the touchpad up 0% works). I haven't checked how I need to load the keyboard in order to get the touchpad working again. I write this as it Chargers and 15% is still not restarting the touchpad, I guess I have to restart.

  The other week I upgraded to Windows 10 and Win 8.1 behavior continues.

  Of course, all the drivers and updates from Windows Update are installed and uptodate.

  Y at - it a fix, a driver that it cures, a power setting which prevents the tablet to completely drain the batteries in the keyboard?

  Thanks for your time!

  Because I failed to locate the drivers for the touchpad and reinstall so I used the system restore feature.

  Curiously enough the touchpad began immediately the work during the restore process while restoring the system itself ended with a message that it was unable to restore Windows to an earlier version of point as no changes have been identified.

  Well, everything is working now, so, my lesson is that the system restore can restore drivers and relaunch devices Device Manager can not find.

• Iconia W510 no option to add Wireless Display

  Hi, it does not seem possible to use Miracast with my W510 Iconia.  I have updated Windows 8 to 8.1 as soon as he was released and apply automatic updates.   I have checked and have all the updated drivers. However, when you open the Panel of charms, choosing devices then the project - it is not an option to add Wireless Display.

  I guess it's something that "should" be.

  It goes the same for our laptop Acer Aspire V5-552.

  Not all models support Widi, which perhaps explains why you do not have the option. According to this link (http://www.umpcportal.com/2012/12/acer-w510-and-clovertrail-overview-video-and-first-impressions-alw... this product is not compatible Widi.

• Iconia w510 reinstalling MS Office in windows 8

  I uninstalled MS Office in windows 8 because of language problem which was pre installed in the new w510 Iconia tablet. I want to install it again in English language. Could someone help me please.

  If keep you the key and know the version of Ofice so MS tech support may be able to provide a download point. http://support.Microsoft.com/contactus/

  The W510 has only a trial version preloaded.