icons not appearing is not on start

Similar Questions

• Firefox has not been started. I downloaded a new. the icon is crossed out. How can I fix?

  March 25, 2011
  I'm on a Mac OS X (power pc)
  After rebooting my computer today. Firefox has not been started. I clicked on the icon, it has begun to initiate and then stopped before that something happened.

  To try to solve the problem, I trashed the application and downloaded a new. He gave me a message: "the Firefox application cannot be launched-10661."

  I retried the download and the second time, the Firefox application icon has been crossed out. It's a circle with a bar slash on it. Same message arrives.

  Sorry, Firefox 4 is not available for Mac PowerPC. You can re - install the previous version from here:
  http://www.Firefox.com/all-older.html

  Or you can find a non-official version of Firefox 4 for PowerPC here: http://www.floodgap.com/software/tenfourfox/

• How can I get the airplay icon to appear? Changing the settings of firewall does not work

  How can I get the airplay icon to appear? Changing the settings of firewall does not work

  Hello Drjoe378,

  I understand that you do not see the AirPlay icon in iTunes on your Mac. If you have verified that your firewall is disabled or that the problem occurs regardless of the status of your firewall, there is a little more that can help return your ability to connect to AirPlay devices.

  1. Make sure you have the latest version of iTunes and Apple TV software.
  2. Connect your computer and other devices on the same network Wi - Fi. If you are using Ethernet, connect the two devices on the same router or hub. If you use the Wi - Fi and Ethernet, plug your device AirPlay the same router that your computer uses for Wi - Fi.
  3. Restart your computer, device AirPlay and network router.
  4. Because some Airplay devices include a power switch for AirPlay option, look for the option in the settings and make sure that the feature is enabled. Refer to the user guide of the device for more information.

  Use AirPlay to stream content from iTunes on your computer wireless
  https://support.Apple.com/en-us/HT202809

  All my best.

• Dates are not appearing in the column start and Finsh of MS Project 2010. They become W31/4, W31/5, etc. Instead of 7/31/20113. How can I fix it?

  Dates are not appearing in the column start and Finsh of MS Project 2010. They appear rather like W31/4, W31/5, etc. When it should be like this: 7/31/20113. How can I fix it? Note: Dates listed do appear correctly.

  Hello Charlie,.

  You are welcome. It is what we are trying to do... help people! Thanks for letting me know that the problem is solved. Don't forget to mark it as your response so that we can spread the knowledge more far.

  Kind regards

  BearPup

• Windows Live Mail could not be started. The application could not open the Windows Live Mail message store error code: 0x800C0155

  Origianl title: windows live does not open

  My Windows Live Mail has recently stopped working, by double-clicking on the desktop icon top of page does not open the program, appears it the "Windows Live Mail" logo and then a message saying:-"Windows Live Mail could not be started. The application could not open the Windows Live Mail message store. Your Windows Live Mail mailbox is currently being used by another program, such as a virus scanner. close the program or wait so he could complete its operation, then open Windows Live Mail again. (0x800C0155).

  I tried to reinstall WLM, restore my computer, remove anti virus protection. Nothing works

  Help, please!

  Hi B Clinton,

  For a more specialized on issue of Windows Live Mail help, send your query on the Windows Live Forum.

  Windows Live Forum -http://windowslivehelp.com/

• Icons not showing after that newly written extension is compressed to xpi

  I am a beginner who is learning the overlay extensions. I lived a good part of the tutorial. Then, I built a base extension with a toolbar button custom shell by following the steps described in https://developer.mozilla.org/en-US/docs/Mozilla/Tech/XUL/Toolbars/Custom_toolbar_button. As part of the exercise, I downloaded the recommended two icons (for add-on Manager and the toolbar) and did not change their. I add the code to the java file. I copied the file of extension (unzipped) in the folder extensions in my profile, as indicated and restart the browser. An install dialog box was launched, and when I told him okay, perfectly installed extension. The icons appeared in the Add-ons Manager, and I was able to drag the icon of the button to the toolbar. The button works fine, launches the java.

  Then, following the instructions on another page tutorial, I used 7 - zip to archive all items in the folder root extension, in Zip format and gave the file extension xpi. I uninstalled the original extension in the extensions folder, then bounced the browser. Then, Manager of Add-ons, I called 'install module file' and select the new xpi file. Installation went through the usual confirmations, and the extension has now been reinstalled. Only one problem - the two icons are empty. Both in the modules and Manager on the toolbar button. I can click the phantom button in the toolbar and it still launches the java, but no png images arise, including in the Customize dialog box.

  I tried to manually reinstall the extension, and the icons will appear. But a subsequent xpi installation leaves them empty. I tried to re - create the xpi file using the zip program from Windows instead of 7-zip, but still had the white icons.

  In searching the Web, I found an instance of another user having lost images of the icons only after spending like a Flash of extension, is not just me. But the replies to this post did not seem useful.

  Any ideas?

  It took whole unzip to true in the installation of rdf, so that all the icons would get unzipped and be available for use.

• Outlook Express could not be started because MS0E. DLL could not be initialized

  I write on behalf of the client. Here are the error messages: "Outlook Express could not be started because MS0E. DLL cannot be initialized. »
  "Outlook Express could not be started.  Cannot open the application.  Your computer may be out of memory or your disk is full.  Contact Microsoft support for further assistance 0x800703E6, 998 "

  Folders.dbx is probably damaged.
   
  In Windows XP, Win2K & Win2K3 the OE user files (DBX and WAB) are by default marked as hidden. To view these files in Windows Explorer, you must enable Show hidden files and folders under start | Control Panel | Folder Options icon | Opinion, or in Windows Explorer. Tools | Folder options | View.
   
  The path to the message will be very similar to this:
   
  C:\Documents and Settings\Your User of utilisateur\Local Settings\Application Data\Identities\ {long string of letters & numbers} \Microsoft\Outlook Express
   
  With OE closed, find the Folders.dbx file and delete it.  Another will be created automatically when you open OE.
   
  Note these possible side effects:
   
  When you re - start OE, it will build a new index of all *.dbx files it can read and create a new Folders.dbx. However, understand that you will lose the mail directory structure and message rules will probably have to be edited.

• Code 19: Windows Mobile Device icon not found on my computer

  Original title: Windows Mobile Device icon not found on my computer

  Hello

  I donno why but I can't find the icon of my pocket pc (Hp Ipaq) on my computer, the device is connected (a USB icon on the task bar) but I can not navigate on the device in order to copy data for example, as there is no icon.

  Notice that I can install programs on it (which means that it is recognized by the system), the Sync Center says it has disconnected, mobile windows manager shows that it is too disconnected (sometimes showing Error), but the device itself is to show that it is connected.

  In the Device Manager there is something wrong with the PPC (yellow triangle), it reads: "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19) "(that's french).

  Hi AlgeriaRocks,

  I suggest to uninstall the software completely and try to update the latest version of the HP iPAQ h1900 Pocket PC series.

  For more information see the link:

  Code 19: Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged

  a. Click Start and type in Device Manager in the start search and press ENTER.

  b. expand the device in Device Manager

  c. right-click on the device, and then click Properties

  d. click on the driver tab and click on uninstall the drivers and click OK.

  e. restart the computer and check.

  You see the support of HP at following link and try to update the latest version of the drivers.

  HP iPAQ h1900 Pocket PC series-download drivers and software

  For more information, you can also consult the following link:

  Error conditions (performance, beeps, etc.)

  Hope this information is useful.

• WINDOWS MEDIA 9 ON WINDOWS VISTA, NO NOISE, SNDVOL ENCODER. EXE COULD NOT BE STARTED WHEN I CLICK ON THE MIXER. Help!

  right... I just got a new computer, the vista Home premium 64-bit, and I use windows media encoder 9 series to stream live radio broadcasts... everything installs ok, but when I click mixer to sort my sound levels it gives me this error:

  "the mixer"sndvol32.exe"application could not be started. the system cannot find the specified file (0 x 80070002).

  I searched in google and microsoft, Web sites, I found a fix for vista, but when I try to install that he says theres a problem with this windows installer...

  I tried to run in compatibility mode for xp sp2

  Any help would be appreciated

  Hi DJ_KingSize,

  This problem occurs because some legacy applications use files or components that were developed prior to Windows Vista. The names of these audio components may be different in Windows Vista. If the calling application uses the hard-coded file names, the new files and components could not be found.

  To resolve this problem, use one of the following methods to change the audio settings for a device.

  Method 1: Use the order Volume of Windows

  To use the Volume of Windows command to change the audio settings for a device, follow these steps:

  1. right click on the speaker in the notification area icon and then click recording devices or reading.

  2. double-click on the device for which you want to adjust the settings. For example, double-click on Microphone.

  3. click on the levels tab.

  4. move the cursor upwards or downwards to set the desired volume level, and then click OK

  Method 2: Use the control panel

  For control panel allows you to change the audio settings for a device, follow these steps:

  1. Click Start, click Control Panel, click hardware and sound and then click sound.

  2. click on the playback or recording.

  3. double-click on the device for which you want to adjust the settings. For example, double-click on Microphone.

  4. click on the levels tab.

  5. move the cursor upwards or downwards to set the desired volume level, and then click OK.

  For more information, see the link below:

  You may receive an error message when you run an application that uses the recording feature or audio playback in Windows Vista

  http://support.Microsoft.com/kb/930095

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Server process could not be started because the configured identity is incorrect (massive failure Windows 7)

  I had worked in Vista x 64 for more than a year and upgraded to Windows 7 x 64 Ultimate a week ago. IT has worked so far and things suddenly got completely screwed up without obvious reason. I'm into the following loop, where I can't go out:

  1. after booting, two minutes is spent with the message "waiting for Group Policy Client" (normal startup takes less than a minute).

  2. once I enter the password, it passes to another two minutes with "Please wait for the user profile Service...". "(normally, the connection is instant)

  3. I'm connected (I am administrator), but a lot of things is false:

  -Without Aero. Single base type GUI Windows 2000 gray

  -Lack of network

  -A bubble message appears in the status bar:
  Unable to connect to a windows service
  Windows could not connect to the service user profile Service.
  This problem prevents standard users to log on the system...

  -Almost nothing works. Attempts to start to explore causes this error message:
  SOLUTION EXPLORER. EXE
  The server process could not be started because the configured identity is incorrect. Check the user name and password.

  -Try to start the Panel of results in the following dialog box:
  Window title: {26ee0668-a00a-44d7-9371-beb064c98683}
  Message:
  {26ee0668-a00a-44d7-9371-beb064c98683}
  The server process could not be started because the configured identity is incorrect. Check the user name and password.

  -Try to start most of the results of Windows programs in the variation of the above two messages

  -Event log is not functional. I am able to start-> Run-> Services and don't start all services of the event log, but it always says "The event log Service is unavailable".

  4. the things I have already tried and that has NOT worked:

  -System Restore to a point a few days ago when everything worked did not help
  -When you log on under different user accounts (administrator or not administrator), I have the same symptoms.
  -Try to re - install Windows 7 from the DVD fails - it says "source is no longer available...". "or something like that

  That did not help.

  In safe mode, the same problem occurred - cannot do anything and get the same error - "...". configured identity is incorrect... ».
  There is no missing or damaged file.

  in any case, thanks for responding.

  I was hoping that Windows 7 would solve the problems of stability of Vista, but I was wrong - things are even worse.
  It was the last straw - I decided to empty Windows and had Ubuntu Linux.

• "The hosted network could not be started."

  I recently bought a Samsung Galaxy S2 and when trying to connect to my Wifi network, I found that the signal from the router was not strong enough to reach the floor, and since I have a laptop connected with a cable that I thought I could make it work like a virtual router. After some research, I found several programs:

  I tried Connectify, which did not work. Then I tried Virtual Router, that does not work either. Then, I found this:

  http://www.techylabs.com/setting-up-a-virtual-router-in-Windows-7.html

  And it worked, the network appeared in the list on my phone. Unfortunately, when you try to connect, it got stuck on ' Optaining IP-address '.

  I tried to use a static IP address, and even with one put in place, it got stuck on ' Optaining IP-address '.

  After that, I have been clicking through the menus a lot and hit accidentally turn off somewhere. Since then, when I try to start the virtual router, it says:

  The hosted network could not be started.

  The group or resource is not in the correct state to perform the requested operation.

  I can't find the place where I hit the turn off, and I don't know what to do more :(

  Hello

  I suggest you to see link below and check if it helps.

  WiFi/SoftAP virtual fails to start with "the hosted network could not start" on Windows 7 and Windows Server 2008 R2: http://support.microsoft.com/kb/2625519

  Hope this information is useful.

• Windows Live Mail could not be started - error 0x8E5E0247

  After replacing my hard drive and in restoring a new one with a recent system image, now I have a problem with Windows Live Mail. When I click on the mail icon I get a window stating - "Windows Live Mail could not be started. Closure of WLM. Your calendar contains corrupt data that forcing WLM to close. (0x8E5E0247)"the dates of the activities performed are:

  The system image was recorded on the hd @ beginning post: 07/03/14 / @ 22:37 at the end: 08/03/14 @ 12:26 AM

  DVD repair system I used was created on 12-03-14

  The new hd has been installed and restored w/above points on 13-03-14.

  Any help would be greatly appreciated.

  [Original title: Windows Live Mail]

  0x8E5E0247

  The new hard drive is using large areas, who do not recognize the databases used by Windows Live Mail, Windows Search, Windows Update and Event Viewer - to name a few. You may be able to correct the flaw of uninstallation or reinstallation of any manager of storage you have. HP computers come with an Intel Storage Manager, for example. See also this article: an update that improves the compatibility of Windows 7 and Windows Server 2008 R2 with the Advanced Format drives is available

• BlackBerry smartphone email alert icon not showing on Email folder?

  I chose the option to separate my SMS / email messages.  I understand that copies of ALL my messages go to my folder 'messages' standard, but the red alert icon shows only on my 'messages' folder when I receive a new e-mail message.  It does not appear on my e-mail folder.  On my 8830, I could hide my 'messages' folder and manage all my messages SMS & Email to their respective folders, and whenever I got a new email, the small red alert icon would show up through my e-mail folder.  I talked to others on tour in other forums who say that their to work properly.  Their red alert icon will appear next to their EMAIL folder when you receive a new email.  But mine is displayed by my standard 'MESSAGES' folder, so I have to keep the 2 folders side-by-side on my home page, which is very annoying.  E-mail messages still land in my EMAIL account correctly and I can work on this issue, but I don't know where the message was if I didn't keep the handy 'MESSAGES' folder because the alert icon will appear next to that one instead.  Thanks for any help or direction.

  You are welcome.

  I think that is how it is planned... on the main messages folder.

• RDS application icons not appering correctly in view Horizon 6 customer

  
  Some applications display the right icons, some appear only with an icon 'A '.

  Somethings wrong here... Any ideas?

  Funny

  

  Not so funny

  

  OK simple solution:

  Remove rights and add the application once more as a new application pool and the icon will appear right.

• Creative cloud does not automatically start more

  My creative cloud application does not automatically start more. It worked fine for a year and a half.
  But although the box in preferences to start automatically is checked that it does not automatically start more.
  It does not appear in the system tray I must maualy double click the CC (which i put my office op) to start.

  I also had a solution ad put a CC shortcut in the windows startup plan but he strangely disappears each time.

  After I dubble click on the strats of application up normally and everything works fine, so no problems with programs or the application of cc
  It was simply not possible box Autostart to highest upward. I use windows 8.1

  Unfortunately this did not help either. What I did then, I unchecked the box run at startup and put a shortcut in the Windows startup folder. Since then, (3 days ago), he continues to work. Hope it stays like that.

• Game could not be started and frozen iPod.

  I was about to play one of the games to my iPod when all of a sudden the screen started to say the game could not be started and it might be the result of having a full iPod. The thing is: I still have left to use 120 GB and the screen froze. I can't go back to the menu or anything. The music does not play when I press either reactivate. I can only continue to look at the message.  It's as if it froze completely. Does anyone know what I could do? Thank you!

  Reset your iPod. See to Learn how to reset your iPod - Apple Support if necessary.

  TT2