Icons of Photoshop CS5 adjustment layer

Similar Questions

• Photoshop CS5 - Move layer with a vector mask applied

  Hello world

  I work with Photoshop CS5 and that you have encountered a problem. I can't seem to select a layer (with a vector mask applied) and move it, even with the automatic selection on layer. I can move when the vector mask is off or when I rasterize the vector mask.

  Am I wrong in thinking that I was able to select a layer (with a vector mask applied) before, and it is a bug? Or I'm completely wrong and it has never been possible?

  I have attached a screenshot for reference.

  

  Oops, after re-reading my question I realized that I didn't have the word correctly.

  I would like to select the layer/object and physically move around the artboard using the move tool. But it won't let me select and move around, unless I have clear/rasterize the vector mask.

  Thanks if Yohanna! My bad.

• How to edit icons in Photoshop CS5?

  I pass by it whenever I need to reinstall an operating system, after installing all my programs I am assigning my custom icons, and inevitably I find an I want to tweak, I'm going to open it in Photoshop and... nothing. Then I spend an hour on Google to research to make an article that describes where to obtain the. ICO plugin and how to install it on a 64 bit system. Well I can't find 'that' article, my daughter makes me crazy, and I was hoping someone could point me in the right direction. I need to change this icon and Photoshop does not play well, any help would be appreciated.

  OS:  Windows 7 Edition Home Premium x 64
  

  Version: Photoshop CS5
  

  Add this plug in Photoshop.

  http://Telegraphics.com.au/SW/product/ICOFormat

  Extension of ico will appear as a recordable file assuming you are 8-bit, and 256 x 256.

• You can create an icon in Photoshop CS5.5

  I need to convert a tiff image to an icon for use in another web application, is it possible? If so, how?

  There are plug-ins that can be downloaded and which will allow you to save files in .ico format.

  A quick web search turns to the top of these:

  http://www.sibcode.com/icon-plugin/

  http://www.Telegraphics.com.au/SVN/icoformat/trunk/dist/Readme.html

  Or the other seems sufficient to save a favicon.ico file, for example.

  -Christmas

• Adjustment on Photoshop CS5's layers...

  I can't settle on Photoshop CS5 adjustment layers. I'm trying to understand if there is a setting that has been changed - I've used photoshop for 10 years and I've never had this problem. When I double click on the thumbnail setting layer it won't let me adjust it. I don't know that I've missed something...

  Hi thewolfefam,

  Greetings!

  Reset preferences

  Close Photoshop.

  Press on and hold Ctrl + Alt + Shift (Windows) or Cmd + Opt + shift (MAC) and click on Photoshop to open.

  It will give you a warning message to remove the Photoshop settings folder.

  Click Yes to that.

  Note: Resetting the preferences can make you lose your custom brushes and the presets.

  Concerning

  Jitendra

• Is there an equivalent for Photoshop adjustment layer masks After Effects?

  I have a clip showing the clouds in a blue sky and the Valley in the bluish shade, and I want to darken the blues of the sky without affecting the Valley. Effects such as Hue/Saturation or curves produce good results on the sky, but apply to the entire composition.

  In Photoshop I would just do something like painting a gradient on the adjustment layer mask, but I don't see an equivalent in after effects CC2015.2 and wonder if I forgot something. Pointers?

  John

  Mast track controls are in the Modes Panel. The second icon in the lower left corner of the timeline will reveal the switches and modes column in the timeline panel, or you can press F4 to switch between them. If the second icon is not selected, then you should also see a switch at the bottom of the column switches switches/Modes.

  Here's how I would setup a colour correction in this train yard shot to put a glance Kodachrome faded on the bottom of the frame without turning the yellow sky.

  

  If you look very carefully between the cars, you can see the start and the end points for my gradient.

• Adjustment layer - unique icon for all.

  Hello

  Recently all the icons in my adjustment layers show the same thing, what is the 'Add adjustment layer button '. I always get the curves, filter photo adjustments etc. - it's just that the same remanins icon. Why is this fact.

  Thank you very much.

  Ah! Ok.

  It's normal. It was not not clear in your message that you were talking about the icons in the layers panel.

  The icon changes depending on the form of the document, if you have an image with a larger than 2 x 3 report, it'll be ok.

  You can change the size of the tumbnails in the layers panel menu, and by selecting "Control Panel Options."... "and the adjustment layer icon will be different.

  In the future, please give the full Photoshop and your operating system version, 14.2 CC instead of CC or CS6 13.1.3 instead of CS6, you can find this info in help > system info...

• Reduction of noise in CS5 workflow: still possible to do it on an adjustable layer?

  In CS5 that it seems to be him better, more than perform noise reduction is recommended in ACR before editing the picture.

  The problem is, once you do this, it seems that the setting is "locked", ie you can not go back and change after you make your changes to the PS as a healing brush, levels and other effects settings, right?

  Is it possible to adjust the noise the same mode of action in ACR on an adjustment layer as well as after all your changes are made, you can go back and tweak it?

  Or do you need to use another plugin or filter to change the noise if you want to have the flexibility to modify the intensity of the effect more later?

  Good Photoshop offers the filter filter - noise - noise reduction, and it is actually pretty good.

  There are also a large number of 3rd noise reduction tools, in the form of plug-ins based on and actions, that can do the job.

  The extent of mixing creatively effects, there are fairly simple ways...  For example, it could duplicate your image as a second layer, reduce noise, then set the opacity of the layer, or the same mask to the top layer in selective noise reduction of effect parts.

  You could even superimpose the Photoshop filter reduce noise in as a dynamic filter, although the dynamic filters can kill Photoshop interactive performance.

  -Christmas

• "Adobe Photoshop cc has stopped working" when I click on an adjustment layer

  I get this message "Adobe Photoshop CC has stopped working".

  I've done everything there is on the help site. Still no luck. Here's what happens:

  Photoshop opens and I can work with it. It seems that almost all functions work perfectly, HOWEVER... When I try to access an adjustment layer, say the levels, then Photoshop will stop. Strangely, if I select the black & white adjustment layer, it WORKS? The OTHERS don't.

  I also had on the Adobe help forum and can't help and say it could be a flaw in Windows

  My system:

  Windows 7 Service pack 1

  740 NVIDIA graphics card

  Avast security

  Here are the error codes I got from the event viewer

  The failing application name: Photoshop.exe, version: 16.1.1.327, time stamp: 0x5667fb90

  The failed module name: Photoshop.exe, version: 16.1.1.327, time stamp: 0x5667fb90

  Exception code: 0xc0000005

  Offset: 0x000000000613ac34

  ID of the process failed: 0xa2c

  Start time of application vulnerabilities: 0x01d1528f0f0ee895

  The failing application path: C:\Program Files\Adobe\Adobe Photoshop CC 2015\Photoshop.exe

  Path of the failing module: C:\Program Files\Adobe\Adobe Photoshop CC 2015\Photoshop.exe

  Report ID: 77c9266d-bebc-11e5-98ce-d43d7ebe3e53

  The failing application name: Photoshop.exe, version: 16.1.1.327, time stamp: 0x5667fb90

  The failed module name: Photoshop.exe, version: 16.1.1.327, time stamp: 0x5667fb90

  Exception code: 0xc000041d

  Offset: 0x000000000613ac34

  ID of the process failed: 0xa2c

  Start time of application vulnerabilities: 0x01d1528f0f0ee895

  The failing application path: C:\Program Files\Adobe\Adobe Photoshop CC 2015\Photoshop.exe

  Path of the failing module: C:\Program Files\Adobe\Adobe Photoshop CC 2015\Photoshop.exe

  Report ID: 7943d034-bebc-11e5-98ce-d43d7ebe3e53

  The modules work perfectly in Safe Mode BUT not when I do a clean reboot.

  I also did the following:

  Creates a new user

  Run FIXIT

  SFC/SCANNOW

  Uninstalled and re installed Photoshop CC

  Uninstalled and re installed Driver Nvidia

  Restored to the old NVIDIA driver

  Uninstalled all drivers (Wacom tablet & external HD)

  There were also times that I could not get into the event viewer (this message appeared "Microsoft Management Console has stopped working")

  Let me know if you need more details.

  Cheers, Craig

  Hi Craig,.

  Please provide a detailed account of your question. You, the efforts are very much appreciated!

  I imagine the inconvenience that you are experiencing and will certainly help you in the right direction to solve the problem. However, I would be grateful if you could answer a few questions to refine the question in order to provide you with better assistance.

  a. you did any important changes made to the computer just before the problem occurred?

  b. what fixit did you run, when you say "Run FIXIT"?

  You have tried most of the linear troubleshooting, it can be concluded that the question could arise also following a conflict of third-party software that impede the performance of Adobe Photoshop CC. To diagnose the problem, I would suggest trying the following methods and check if the problem persists.

  Method 1:

  It is possible that the application has not been uninstalled properly and have hampered after the new installation. I suggest to try to start the next fixit and then try to install the program Photoshop CC.

  The problems that the programs cannot be installed or uninstalled

  If the problem persists, try the following method.

  Method 2:

  The question could also arise due to a conflict of third-party software, so, I would be as you suggest clean boot of the system once and then try to install the program in a boot environment.

  Place your system in the clean boot state helps determine if third-party applications or startup items are causing the problem. You must follow the steps in the article mentioned below to perform a clean boot.
  How to perform a clean boot in Windows

  If the problem does not occur in the boot, you can determine which applications and services on the computer is causing this issue.

  Note: See "how to reset the computer to start normally after a boot minimum troubleshooting" to prepare the computer to start as usual after a repair.

  Hope this information is useful. Let us know if you need more help, we will be happy to help you.

• How to do Photoshop CS5 (64) - Windows 10 - larger icons on high resolution monitors

  How to do Photoshop CS5 (64) - Windows 10 - larger icons on high resolution monitors

  Adobe didn't add features to manage screens high resolution until later versions. So a job is about just decrease the resolution in the settings of your operating system. I know it's a pain, but it works.

• Mac OS 10.6.8 - Photoshop CS5.1 after years of perfect use, suddenly I'm unable to select a layer by clicking on the image and select it in the layers palette.  Solve this problem for me and I'll buy you a new car.  With our thanks, David Heidelberge

  Mac OS 10.6.8 - Photoshop CS5.1

  After years of perfect use, suddenly I can't select a layer by clicking on the image and select it in the layers palette.

  Solve this problem for me and I'll buy you a new car.

  With our thanks, David Heidelberger

  Hi David

  Have you checked your settings to automatic selection in the upper left of the workspace?

  

• Layer PHOTOSHOP CS5 Panel

  Hello

  Panel layer PHOTOSHOP CS5 is no longer appears blue when selected. It's frustrating

  How can I set it right?

  Thank you

  I don't think there is anyway to make it look like this in CC

• In Photoshop, CC (2014), the properties of Hue/Saturation adjustment layer disappear

  I am under Photoshop CC (2014) under Windows 7 Professional.  The program is updated.

  Today, when you change an 8-bit image, I added a Hue/Saturation adjustment layer.  Then, in the properties panel for this layer, with the on-image adjustment tool selected, I clicked on a colour in the picture to get a range of colors including saturation I wanted to settle.  Then, using the saturation slider in the properties panel, I increased saturation of this color range. Finally, I closed the properties panel by clicking on the double arrow in the upper right.

  Later, I wanted to change this adjustment layer.  I double-clicked on the thumbnail of the layer to reopen the properties panel and found that, while the increase previous saturation still worked, the saturation slider was back to its default position, and the range of colors that I had previously established was gone.  So, I couldn't make other settings for this range of colors.

  
  

  I then did some additional tests: I deleted the first Hue/Saturation adjustment layer and created a new adjustment layer Hue/Saturation . I created there still a range of colours as mentioned above, has further increased the color saturation, and then again closed the properties panel by clicking on the double arrow in the upper right corner.  This time, however, when I tried to change this adjustment layer, instead of a double click on the thumbnail of the layer to reopen the properties panel, I clicked on the layer and then clicked «Edit adjustment...» "This opens the properties panel, which, this time, correctly showed my original settings - the saturation slider positive adjustment that I've done before, and the range of colors created earlier was still shown. But then, on a hunch, I added a curves adjustment above the adjustment layer Hue/Saturation layer.  Now, when I open the properties of the Hue/Saturation adjustment layer panel again (by right-clicking on the layer and then clicking on "change the adjustment...) "), my previous settings were left - the saturation slider was to its default position and the range of colors was gone!  (But the increase in saturation still worked.)

  
  

  This suggests that there is a bug in the operation of the properties of the Hue/Saturation layer panel: in short, once you've added an additional adjustment layer, you can then go back and change the Hue/Saturation layer properties.  I am curious to know if others have noticed this.  In addition, Adobe provides to this address?
  

  OK, I'm not entirely sure I understood your message completely, but when you edit a range of colors with hue/Sat layer, and click and then back on again, it will default to showing the RGB values, which you can not make any adjustment to.  If you choose the previous color of the image, or a similar color, it _will_ show you adjustments.  As long as your picked color is contained in the previous adjustment range.

  YPU may also use the RGB fall down (actually they call him master today) and chose the closest color of your color previously selected.  I hope that you are not you can change the color range operated by dragging the four sliders on the two bars of color at the bottom of the properties panel.

  That makes sense, or I'm going the wrong way?

• Photoshop cs5.1 icon is disabled after a successful installation

  I have a brand new version of Photoshop CS5 Extended for Mac (MacBook Pro), academic version. I have the serial number and Photoshop cs5.1 has been successfully installed.

  But after installing it, I'm not able to open the program, because the icon is disabled.

  I get the following error message: can´t you open the application Adobe Photoshop CS5.1 because it may be damaged or incomplete.

  I have now tried 4 times with the same result.

  No idea what I'm doing wrong or how I can fix this problem?

  Thanks in advance.

  Greetings from the Spain

  (1) uninstall completely the costume craetive CS5.5

  (2) run the cleanup from this link:- www.adobe.com/support/contact/cscleanertool.html

  (3) enable the root user account

  (4) install the program.

• Photoshop CS5 x 64 crash when changing the layer styles

  Hey there,

  I searched and searched through the entire interweb, but almost no one seems to have never had such a problem, so I think it is the right place to ask and hope to be helped . Short version is: Photoshop CS5 (x 64) is constantly crashing when you change a layer style.

  Recently, I installed my CS5 Design Premium on a new laptop (Fujitsu Lifebook AH351) and I have serious problems with Photoshop CS5. On the first run, everything was fine, and he keep like this for a while. Now every time I try to edit a layer style Photoshop crashes immediately. I did not need to change anything, just open the layer style, press OK and Photoshop has disappeared. I can work around by resetting the preferences that works until the next reboot, no matter if I change anything on the settings or not. Tried this on the initial version of the PS and the last update (12.0.4). Once I have reset settings yet, I can work again on the layer styles. Any of you have a similar problem or an allusion to what I could look at?

  The Lifebook has of a decent feature which I think somehow the culprit in this case: it has an on-board graphics unit and a separate GPU (nVidia GForce GT 525 M) that can be added in on a program basis. Indeed, Photoshop recognizes and allows me to enable the OpenGL functions as well, so from there, it seems. The internal GPU cannot be disabled because connect you your monitors.

  Some data on my system:

  Fujitsu Lifebook AH531

  • Intel® Core™ i5 - 2410M
  • RAM: 8 GB DDR3 1333 MHz
  • 750 GB SATA HDD 5400 U/Min
  • Windows 7 Home Premium x 64 (updated)
  • NVIDIA® GeForce® GT 525M with 1 GB of VRAM

  Photoshop CS5 x 64
  

  • no plugins to use/install
  • any settings not changed, not even shortcuts

  Thanks in advance

  enoversum
  

  WindowBlinds was probably to blame.  It's a bad app that changes the window settings and made generally bad things for the environment of the user interface to achieve a different look.

  There may be more options for things you can do (bad) to Windows, such as the screws of the metric of the display with the software from StarDock, simply because Windows is more popular - but if you don't about frivolous things with your system it can be as clean and steady work as a Mac system , if not better.  Mac have many of their own problems.

  -Christmas