icons of programs does not

Similar Questions

• Control Panel: programs: does not

  I open the Control Panel, then click on programs. "" A message appears that says program does not / sometimes windows will try to determine and after 3 or 4 times or when I try to get out it "brightened. Most once not. It is therefore impossible for me to uninstall them, or even to watch the programs that are installed. Any help would be greatly appreciated and I'm new to this. Thank you!

  Hello

  What antivirus/antispyware/security products you have on your machine? Include everything you
  ever had including those that you uninstalled. (These can leave leftovers that can cause strange)
  questions.)

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
  program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  =============================

  Icons do not appear in the Control Panel, or you cannot start Control Panel, Windows Welcome, or
  Games in Windows Vista
  http://support.Microsoft.com/kb/936686/en-us

  The Control Panel window will not open in Windows Vista
  http://www.tips4pc.com/articles/Windows%20Vista/control_panel_window_will_not_op.htm

  It was reported a updated driver it has blocked, so have you updated drivers
  lately? Also check the driver updates in Windows Updates.

  =============================

  If necessary:

  A search for all most .cpl files will be in "C:\Windows\System32" However, you can have others.
  Click on each of them at a time and see if we don't start – if so right-click on it and rename it
  using cpZ as the extension is is to find. Try Control Panel - if no joy persevering of all your
  .cpl files. (Note that other people find other subfolders under C:\Windows not should be judged as they)
  are not active.)

  Some of them are appwiz.cpl firewall.cpl, desk.cpl, powercfg.cpl, inetcpl.cpl, timedate.cpl and
  others.

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• I bought and installed Photoshop elements 13. The program does not open says bur I have to register on my Adobe ID that I have. Then, I get a box saying I'm not online or my computor clock is out of adjustment. The clock is correct for the time and I have

  I bought and installed Photoshop elements 13. The program does not open but says I have to register on my Adobe ID that I have. Then, I get a box saying I'm not online or my computor clock is out of adjustment. The clock is correct for the time being, and I am on the line what should I do?

  See the link below:

  Photoshop elements 13 - can't get a response code in the offline activation method

  Re: I have uploaded a second copy of Acrobat Pro DC to my PC. By clicking on the icon gives your computer is offline or your computer's clock is set incorrectly?

• Click on the Photo icon and it does not open. I recently downloaded and installed El Capitan and it seems to have slowed things. How can I solve this problem?

  I click on the Photo icon, but it does not open. I recently downloaded and installed El Capitan 10.11.5, and I wonder if it is slow things down.  My iMac has 2 GB of memory and 124,75 GB of free space. Picture worked fine, then I wonder what is happening. Can anyone help?

  Yes, it's probably slow things down a GB of s2 on memory is the absolute minimum - you need to update your memory which is cheap and easy - a reasonable and a reliable source is Other World Computing- there are others including Apple

  LN

• HP Color LaserJet CP2025n Prin: I need to download the older driver because a program does not work with the new driver

  Where can I find the olderdriver that I can use windows 64 bits 10,

  because a program does not with the new driver.

  The year may be 2014 or almost.

  Your Timo

  @tisalmet

  Thanks for the reply with the details,

  You can activate the Device Manager to view hidden devices by following the steps mentioned below:

  To work around this behavior and display devices when you click Show hidden devices:

  1. Click Start, point to programs, point to Accessories, and then click command prompt.
  2. At a command prompt, type the following command and press ENTER:

     Set devmgr_show_nonpresent_devices = 1

  3. Type the following command a command prompt and press ENTER:

     Start devmgmt.msc

  4. Troubleshoot the devices and drivers in Device Manager.

  For more details: click here

  Uninstall all software and drivers for printers:

  When you need to uninstall a driver completely, the best and safest method is to use the uninstaller of the device (if it has one). If you have added the device to your system with a Setup program (as is the case with most of the graphics card and sound card drivers, for example), you can uninstall it as you would any other program.

  1. Click Start, type uninstall program, and then press enter.
  2. In the uninstall window, which appears, scroll through the list and find your device or drivers. Double-click the entry to start the uninstall process.

  Sometimes devices will not have an uninstall program or the uninstall program will not appear in the list. In these cases, you can use Device Manager to remove the driver completely.

  1. Click Start, type Device Managerand press enter.
  2. Find and double click on the category of the device you want to uninstall (for example, the graphic card would be listed under display card) driver.
  3. Right click on the device, and then click Uninstall.
  4. Windows prompts you to confirm the removal of the device. Click OK to remove the driver.
  5. Once the uninstall is complete, restart your computer as soon as possible.

  Once the above steps are done, click here to download the full software features for your printer and follow the Setup process to start to use your printer again.

  I would like to know if these measures worked for you.  If they did, it's great!  Give us some reinforcements by clicking on the solution and laurels, buttons that help and others see that we have the answers!
  Good luck.

• Recovery disc Creator program does not work

  I bought a new Tecra, because I have Nero to burn discs, I removed Sonic my system and after that I recognized that recovery disc Creator program does not work!
  I reinstall Sonic using Toshiba Application install, but nothing has changed and said: my recovery disc Creator program. "shortcut is broken!
  I searched the Forum, but could not find any solution
  is there anywhere to download recovery disk creator program?

  Hello

  the link is still present? If so, right-click on the shortcut and tell what program or the name of the program is linked. Maybe we can find something to take home your recovery disk creator.

  You know, that sounds really weird that a program always disappears after reinstalling the burning program sonic. Maybe it s just a special option or something that needs to be enabled.

  Welcome them

• The Eagletree data logger program does not start

  After downloading the software from version 9.13 recorder data (see [http://www.eagletreesystems.com/Support/apps.htm]) on my computer with OS Windows 7 Professional, the program does not start.
  Also try different compatibility settings does not solve the problem.

  An earlier version of the same program open normally, and also on the computer of a friend with Windows 7 there is no problem.

  Someone has any idea how to solve this problem?

  MAYDAY and greetings,

  Eddy

  Hello

  I'm a little confused about your ad Mr. Why ask you this question here?

  Here he s a user to Toshiba user forum where people can discuss on laptops Toshiba and Toshiba software, drivers, etc., but this data logger has nothing to do with Toshiba.

  In this case you must contact directly to the manufacture of the data logger. Guys have to know what you have to do to make it work.
  ?

• The iTunes Setup program does not open windows 10

  I recently bought a new computer that comes with windows 10 home installed on it. When you try to install the version of Itunes available on the itunes site, the program does not open, but instead appears with the message

  The same goes for the other files installed that have been suggested for windows 10 errors and I can't seem to find a solution. I even tried to contact Microsoft technical support team however they were no help either.

  Help me please!

  I have also the same problem and same message. I have a new Lenovo laptop with windows 10. I sent support from Lenovo. I hope they can help.

  

• SL500 "this program does not support this system.

  I have an SL500 with 64-bit windows system 7. He has a new system installed. I have correctly installed all necessary drivers. Now, I'm not able to install elements of followind with the system update utility:

  ThinkPad ultranav driver for windows 7

  ThinkPad hotkey features integration pilot

  ThinkPad Ultranav utility

  If I try to manually install, I get an error message "this program does not support this system.

  I had the same problem with Version 3.84.1500 of the driver Thinkpad hotkey features integration

  (and the latest version of 3.84.2000)

  This is a faulty installation.

  2 the missing files.

  Solution to what Lenovo fixes installation:

  Download and install the latest version.

  Download and install the 3.81.0100 version.

  Copy the files SWI32.sys and SWIX64.sys of the 3.81.0100 in the folder version corresponding to the most recent version.

  Run setup.exe from the most recent version.

  According to the properties file SWI32.sys and SWIX64.sys are used as 'System Information Detector'.

  No wonder we get the error message "this program does not support this system.

  Lenovo, please fix.

• I can't create an installer, after install the Vision Builder demo and then uninstall it. I can't create a Labview Installer more, he asks me an installer of generator of Vision, even if Labview my program does not have nothing to do with it...

  I can't create an installer on LabView, after install the Vision Builder demo and then uninstall it. I can't create a Labview Installer more, he asks me an installer of generator of Vision, even if Labview my program does not have nothing to do with it...

  Hi, Shada, this can happen if you include additional installers to your installer for example DAQmx. When you do this the installation program must include other files like MAX (Measuremente and Automation Explorer). Probably when you installed Vision Builder he updated MAX, so when your Installer try to understand MAX, his request the source where it was installed in your computer in this case Vision Builder.

  Here you can cache information so it is not asked once again, or you can download a version more recent fo DAQmx, then it will update MAX and change the dependecy.

  You can find more details about it in this KB:

  3S88PJMY knowledge base: why do I get an error message 'Missing Distribution' when you try to build an install...

  And to keep a copy, here's more information:

  How to stop missing delivery Notification whenever I build an installer?

  Best regards

• I get error code program does not. What should I try?

  Every program I try to use rpet "program does not."  Cannot use the computer at all.  I already have

  tried all the suggestion of help: reset the onboard computer, closed & restarted, installed all updates.

  Hello

  (1) have you made any changes to the computer before the show?

  (2) what operating system is installed on the computer?

  (3) what antivirus application do you use?

  If you use Vista operating system follow these steps. If not, answer us with more information we will help you further.

  Method 1:

  Step 1: Try to restart your computer in safe mode and check if the applications are working fine.

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  If it works fine in safe mode, try to perform a clean boot in order to find the root cause.

  Step 2: Perform the clean boot using the suggestions mentioned in the link mentioned below.

  http://support.Microsoft.com/kb/929135

  NOTE: once you check the clean boot feature configure Windows to use a Normal startup using step 7 proposed in the above mentioned link.

  Method 2: Run a full scan of the computer by using the following antivirus applications.

  Microsoft Safety Scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Method 3: Optimize Windows Vista for better performance

  http://Windows.Microsoft.com/en-us/Windows-Vista/optimize-Windows-Vista-for-better-performance

  I hope this helps!

• Windows import program does not close after you import photos from a camera.

  Windows import program does not close after you import photos from a camera. It is frozen on the desk and the computer must be restarted to use the program again, windows does not detect a problem, how to fix it.

  original title: importer of photo and video for windows

  Hello

  1. which version of the operating system is installed on the computer?
  2. don't you make changes on the computer before the show?

   
  Method 1:
  You can perform a clean boot and check if the problem occurs.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the Knowledge Base article.
  
  Method 2:
  Alternatively, you can change settings for importing pictures and videos in windows by following the steps from the link.
  http://Windows.Microsoft.com/en-us/Windows7/change-settings-for-importing-pictures-and-videos
   

• The Magentic program does not work with newer versions of windows

  Original title: Programas compatibility application applications app applications Juego Juegos Heredado USO caudal Cuelgue Cuelgues

  The Magentic program does not work with newer versions of windows

  Hello danielbrauer,

  The magnetic site says the requirements are for Windows XP or higher. However, it is not on the Windows Vista or the Windows 7 Compatibility Center.

  You can try the following to see if it will help with compatibility. If the program is not compatible, then you try to install and run the program in compatibility mode.
  Use the following steps:
  (1) right click on the program
  2) click Properties
  3) click on the Compatibility tab
  (4) select run this program in compatibility mode and select Windows Vista or other operating system, the program has been run successfully.

  Check out the link here: make sure to run older programs in this version of Windows
  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  If this does not help, you can contact the magnet to see if they have an updated version.

  Sincerely,

  Marilyn

• shortcut for deskjet 8600 pro has disappeared. Re-run the installation program does not help. How can I get that back?

  When I bought and installed my Pro Deskjet 8600 in last July, a wonderful control program has been installed. However, the shortcut on the desktop for this program has disappeared, and I can't. Re-run the installation program does not help. How can I get that back. All I have now is an older version of the HP Solution Center, which does not have the features that I got into the habit of.

  Hello

  Uninstall the software by following programs > HP > HP Officejet Pro 8600 > Uninstall.

  Then download and install the latest version of the software below, it is a more recent software and should solve the problem you are experiencing:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=bi-108858-3&cc=us&DLC=en&LC=en&OS=4131&product=4323659&sw_lang=

  Shlomi

• AiOSoftwareNPI (* .ms) the Setup program does not start when I start my computer.

  original title: AiOSoftwareNPI

  I'm having a problem with a software AiOSoftwareNPI problem (* .ms) the Setup program does not start when I start my computer.

  I know it's a Windows Installer but I don't have a disc with this route. I even tried to reinstall the windows xp disk and it does not work, I still

  get the same box when I shutdown and restart. The box allows me not to leave him continues to appear.

  Thank you

  Ms. C

  After doing a Google search for AiOSoftwareNPI and followed by the reading of many different threads in various forums, I found that it is for drivers for an HP all-in-One printer.

  You have an HP printer?

  If so, the usual suggestion was to place your HP printer disk in your CD/DVD drive and restart. After reboot would be installed the necessary files and the pop - up would more appear at startup. I don't know if it will actually work because in all the discussions I've read, none of the original poster never responded by saying that it worked or not.

  The next most common suggest was to download the latest driver for your HP printer to your version of Windows (including at the level of the ILO) and install it. Yet, not a single original poster has responded.

  In fact, if you have an HP printer I suggest to visit the web site of HP support below the link to get the latest drivers and their installation. Visit the support for the correct installation method and if you need to remove the old driver first. You can also visit the communities of Support HP for assistance (a link for communities is also on the next page).

  Support HP & drivers
   http://WWW8.HP.com/us/en/support-drivers.html

  Kind regards