ICS - Internet connection sharing does not

Similar Questions

• Internet connection sharing does not work anymore

  I have used Windows Vista Home Premium for 2 years now on my laptop. Internet connection sharing enabled to connect to the internet via my wireless adapter and allowed me to share my internet connection through the ethernet port. He worked for more than a year. All of a sudden 4 months ago Windows Vista doesn't let me share the internet connection more. When I go to networking and sharing Center, click on "Manage network connections" and it shows that my "Wireless Network Connection" is always set to share. So after reading several forums, I clicked on wireless network connections and click right properties. Then I clicked on the sharing tab, to make sure that "Allow other network users to connect through this computer's Internet connection" has been verified and that it is. After that, Windows Vista will not always share the internet. Someone suggested that I double check the IP version 4 and 6 on the wireless and Ethernet connection were defined on IP addresses obtain automatically, and they are. The computer still will not share the internet connection! I even took the manufacturer in the view of portable and made sure my cable modem Simulator wasn't bad. I took it to a computer store and we checked the crossover cable. Everything is fine! What else can I try?

  Obtain an IP address automatically is the wrong setting on the Ethernet connection.  To return to the sharing tab and unshare the wireless connection.  Close all windows network, and then open them and re - share the wireless connection.  Who must configure IPv4 for the Ethernet connection properties for:

  IP address: 192.168.0.1
  Subnet mask: 255.255.255.0
  Default gateway: no
  DNS server: no
    
  Owner, Boulder computer Maven
  Most Microsoft Valuable Professional

• ICS: Internet connection sharing ERROR while allowing IP.

  Hi all

  My "Netgear" router gives the IP Address of the gateway 192.168.0.1 and my laptop is connected via a wireless connection. When I turn on my connection sharing wireless internet connection, windows xp tells me with the message below:

  "When Internet connection sharing is enabled, your LAN adapter will be on use the 192.168.0.1 IP address." Your computer may lose connectivity with other computers on your network. If these other computers have static IP addresses, you must set them to obtain their IP addresses automatically.
  "Are you sure you want to enable Internet connection sharing?"

  When I press 'Yes', it gives me an error:

  "An error occurred while Internet connection sharing was being enabled.

  Internet connection sharing cannot be enabled.
  A LAN connection is already configured with the IP address that is required for automatic IP addressing.

  My question is, if we can configure ICS service to activate other windows of the IP ADDRESS is required to apply?

  Thanks in advance for your help...

  I'm sorry, but ICS is completely inflexible and does not change its LAN IP address.

  The settings that you found are for something else: allowing unsolicited Internet connection requests to pass through the firewall on the ICS computer to a client computer.

  Change the address LAN IP of the router.  It is easy to do and will solve the problem.

• Internet connection - apps does not connect

  Original title: internet connection

  tray and control panel shows connected to internet, but apps (news, finance, store etc) shows not connected.

  The permissions are OK on apps

  Thanks for all help you.

  However, this ended my pay grade.

  I decided to win 8 to uninstall and reinstall.

  It works!

  Apps are now connected and everything is fine - until now.

  Thanks again for the help.

  Bill

• internet connection wifi does not work after entering safe mode

  It works when I connect it to the router with cable, I had this problem before & there was a command typed in cmd that solved but I can't remember it, any help?

  Interesting... If you have booted without failure then you restarted in normal mode and your wireless settings no longer work?

  UH... Well the first thing I would do is to disable and reactivate my wireless card.  The second thing I would do is check I get an IP address on my wireless network, this is done in the command line (cmd) by typing "ipconfig".  If you get an IP address then you know that your router works on the dhcp protocol, but to confirm I would ping the router, which will be your entry door, which is usually something like "ping 192.168.1.1".  If you do not have an IP address, you should try to renew and see if you can buy a... "ipconfig / renew".

  In addition, you will need to check that you are actually connected to a wireless network, it should appear in your software wireless windows, or you proprietary wireless NETWORK card software.

• Internet connection suddenly does not work

  My computer suddenly stopped being able to connect to the internet.

  I use a Belkin Surf & share Wireless... Dongle USB and never had any problems before.
  The router works fine, I connect to it on my roommates Mac here where I am writing this question.
  If I can connect to the router and system tray icon says I'm connected. But when I open Chrome or Opera or try and connect to a FTP server (which I need to do for work!) I can't make the connection and the sys tray icon changes from normal to problem with yellow exclamation sign. When I run a diagnosis it is no problem, and when I look at the details, he said "it can be a problem. The funny thing is that sometimes this translates the sys tray connection status icon back to normal and very occasionally, I am able to load a web page, but then the connection breaks again.
  Here is the ipconfig/all command Info:
  Windows IP configuration
  HostName: Windows7-PC
  Primary DNS suffix: -.
  Node type: hybrid
  Active IP routing: no
  WINS proxy enabled: no
  Wireless Network Connection 10 wireless LAN adapter:
  State of the media: Media disconnected
  The connection-specific DNS suffix:
  Description: Microsoft Virtual WiFi Miniport Adapter [hash] 5
  Physical address: 94-44-52-DA-8B-FC
  DHCP enabled: Yes
  Autoconfiguration enabled: Yes
  Wireless Network Connection 9 wireless LAN adapter:
  The connection-specific DNS suffix:
  Physical address: 94-44-52-DA-8B-FC
  DHCP enabled: Yes
  Autoconfiguration enabled: Yes
  Link-local IPv6 address: fe80::c15f:f4be:4165:1f8a % 52 (Preferred)
  IPv4 address: 192.168.1.29 (Preferred)
  Subnet mask: 255.255.255.0
  Lease obtained: June 12, 2013 09:39:40
  End of the lease: 12 June 2013 11:09:47
  Default gateway: 192.168.1.1
  DHCP server: 192.168.1.1
  DHCPv6 IOOKING: 915686482
  DHCPv6 DUID client: 00-01-00-01-15-B7-8A-65-00-25-22-B2-47-29
  DNS servers: 89.101.160.5 / 89.101.160.4
  NetBIOS over TCP/IP: enabled
  Then, there's stuff on tunnel adapters
  I really need to make it work for my work, ideas, what could be the problem?
  Thank you
  D3

  Hello

  To provide the proper resolution, I would need more information on your side.

  1. deal with any issue while using Internet Explorer?

  2. is the specific issue while trying to open the FTP server?

  3. deal with any issue while accessing other Web site?

  This problem may occur corrupt or incompatible drivers, missing updates or because of incorrect network connection settings.

  Method 1:
  I suggest you try the procedure described in the article and see if it helps.

  
  Wireless and wired network problems
  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-8&V1H=win8tab4&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  
  Method 2:
  If the problem persists, I suggest you try to reset TCP/IP. Check if it helps.

  How to reset the Protocol Internet (TCP/IP)
  http://support.Microsoft.com/kb/299357

  See the article and check if that helps.

  Why can't I connect to the Internet?
  http://Windows.Microsoft.com/en-in/Windows7/why-can-t-i-connect-to-the-Internet

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• Is it possible to manage the ICS (Internet Connection Sharing) in the c# code or registry in Windows 7?

  Hello

  I'm developing simple hosted Network Service.

  As we know, hosted network must ICS but I don't know how to handle it in the c# code, or by registry.

  In windows XP, there is a register for the use of ICS on this path.

  -HKLM\System\CurrentControlSet\Services\ICSharing\Settings\General

  However, I see no record of use ICS in windows 7 or 8.

  Issue.

  I wonder there is no way to manage the ICS in the c# code or registry in Windows 7 or 8?

  Thanks for your help!

  Hello

  You can ask your question in this link:

  http://social.msdn.Microsoft.com/forums/en-us/csharpgeneral/threads

• Internet connection sharing: "Bluetooth network connection" does not appear in the list "Home Networking connection."

  Hello.

  With Windows 7, I want to share the network connection Wi - Fi with Bluetooth through PAN (Personal Area Network).

  When there are several connections in addition to Bluetooth after opening "Share" tab, I see these connections in the "Home Networking connection" list, but there is no Bluetooth. Then, when there is no connection in addition to Bluetooth which I can share with, there is no tab "share."

  Equipment: laptop Samsung NB30:

  • Broadcom BCM2070 Bluetooth 3.0 + HS USB Device with the driver PAN ('Bluetooth device (Personal Area Network)") provided by Samsung: Microsoft, version 6.1.7600.16385, 21.06.2006

  As I assume there should be means to somehow add "Bluetooth Network Connection" to a list of connections that can be internet shared with.

  Also, when I tried to fix this problem manually, other questions are raised:

  • There is really no Thoubleshooting guide for Internet connection sharing in Windows 7? I see this document on the site "Microsoft Support" for Windows 98SE, Windows XP - but not Vista and 7.
  • When I'm stuck to the administration of the system to the GUI, there is good decision to guarantee a target with the CLI. After searching a command line installation Internet connection sharing, I see no guides for this - only something likehttp://forums.devshed.com/windows-help-34/enabling-ics-under-command-line-89499.html . Is there really no way to set up ICS by command line and I'm forced to use complex GUIs?

  So, please help me solve problem BT PAN ICS. But if you reply to other questions, it will also be interesting to read.

  Hi LeoniusLeonius,

  Here are a few articles using Windows Internet connection sharing (ICS) you can do refers to.

  Using ICS (Internet Connection Sharing)

  http://Windows.Microsoft.com/en-us/Windows7/using-ICS-Internet-connection-sharing

  Set up a shared Internet connection using ICS (Internet Connection Sharing)

  http://Windows.Microsoft.com/en-us/Windows7/set-up-a-shared-Internet-connection-using-ICS-Internet-connection-sharing

  Change the settings for ICS (Internet Connection Sharing) Internet

  http://Windows.Microsoft.com/en-us/Windows7/change-Internet-settings-for-ICS-Internet-connection-sharing

  Sharing an Internet connection between multiple computers

  http://Windows.Microsoft.com/en-us/Windows7/sharing-one-Internet-connection-among-several-computers

  Change which computer on your network connects to the Internet

  http://Windows.Microsoft.com/en-us/Windows7/change-which-computer-on-your-network-connects-to-the-Internet

  See if one of the articles will help you in fixing the issue.

  Any sharing via command line for internet connection, unfortunately there is no command available to do.

  Hope that answers your query.

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot access internet when you configure with internet connection sharing.

  INTERNET HELP?

  I tried to use the internet connection to my wireless on my PC laptop not wireless using an Ethernet cable. I have connected my pc not wireless to my laptop wireless pc with ethernet cable, I did everything as requested on the site of "Dummies" and the PC says its connected but when I try to go on Internet Explorer, it does not work? HELP! : (PS) my PC is Windows Vista and my laptop Windows 7

  Hello

  1. While sharing was the Internet works fine before?
  2 did you change on your computers before this problem?

  I suggest you follow these methods and check.

  Method 1: You can follow the Windows Help article below and check that ICS is set up correctly.
  Set up a shared Internet connection using ICS (Internet Connection Sharing)
  http://Windows.Microsoft.com/en-us/Windows7/set-up-a-shared-Internet-connection-using-ICS-Internet-connection-sharing
  If ICS is not configured correctly, then you must post back the result by running the following command
  To do this:
  a. click the Start button.
  b. type cmd in the search box.
  (c) in the command prompt, you must type ' ipconfig/all' and check the result.

  Take a screenshot of the command prompt and post.
  To take a screenshot, you can follow this link below.
  Use capture tool to capture screenshots
  http://Windows.Microsoft.com/en-us/Windows-Vista/use-Snipping-Tool-to-capture-screen-shots

  Method 2:  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows?T1=Tab03

  I hope this helps.

  Thank you.

• By using internet connection sharing

  I'm having a problem using ICS.  It used to work perfectly, but then I had to reinstall vista and use my restore disks, and it has not worked since.  That's what I'm trying to do.  I'm taking a wireless internet signal coming from my router and it sends through my LAN port for the computer of my son, who does not have a receiver wireless on his computer.  This used to work properly, but don't work no more... That's what I've done so far:

  I turned on ICS on my wireless connection.  I checked all the services I want to be able to have the connection (http, ftp, telnet, etc.).  I turned "detect settings ip automatically' on my son's computer.  I have a crossover cable from my computer to my son (that's what I used before too).  I don't know what happens wrong... someone has any ideas?  Please help :)

  Hello

  Make sure that you are really using a crossover cable and that the side network is up
  and running.

  First step - Ad - Hoc network

  Ad-hoc networking
  http://windowshelp.Microsoft.com/Windows/en-us/help/0e158c21-4C70-4235-879d-0c9133218e561033.mspx
  Set up a computer-to-computer (ad hoc) network
  http://windowshelp.Microsoft.com/Windows/en-us/help/293c504f-b944-4d5d-835c-f080129bd5dc1033.mspx

  How Set Up Ad-Hoc wireless network in Windows Vista (if you ever want to WiFi)
  http://www.home-network-help.com/ad-hoc-wireless.html

  Create an ad hoc WiFi network secure on Windows Vista (if you ever want to WiFi)
  http://www.Intel.com/support/wireless/WLAN/sb/CS-025386.htm

  Networking tutorial home
  http://www.tehnomagazin.com/computer/home-networking-tutorial.htm
  Practically networked - everything you could possibly want to know.
  http://www.practicallynetworked.com/

  Two step

  ICS Setup

  Using ICS (Internet Connection Sharing)
  http://windowshelp.Microsoft.com/Windows/en-us/help/bfd3bd31-82F0-4B9C-9cde-fb92bc2b14771033.mspx

  ICS step by step
  http://www.windowsreference.com/Windows-Vista/step-by-step-Internet-Connection-Sharing-ICS-Setup-in-Vista/
  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Can someone help me with my problem on the Internet connection sharing?

  I have a LAN wired connection but no wifi capability. I managed to share the internet connection from my pc to my phone by using the "Internet sharing connection" using the usb cable and the first day, it works fine and I can use my phone for internet access. Unfortunately, the 2nd day I can't connect and it says "internet is not available.

  I am currently using windows 7. I hope some of you can help me thanks.

  

  It is on my pc and it says now no internet access. I enabled the "allow other users of the network to connect to this computer" as what I said the first day, it works very well.

  Hello Fritz,.

  Thanks for posting your question on the Microsoft community.

  We need more information about the issue so that we can help you better.

  What is the brand and model of your computer?

  Thank you for details on the issue.

  This problem may occur because of corrupted network drivers or incorrect network settings.

  I would suggest trying the following methods and check if it helps.

  Method 1:
  Run the network troubleshooting and check.
  Reference:
  Using the troubleshooter from network in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  If this does not help, use method 2.

  Method 2:
  Use the steps described in this article and check the issue.
  Reference:
  Wireless and wired network problems
  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win81tab1&V2H=win7tab1&V3H=winvistatab1

  Additional information:
  Using ICS (Internet Connection Sharing)
  http://Windows.Microsoft.com/en-us/Windows/using-Internet-connection-sharing#1TC=Windows-7

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Internet connection sharing cannot be enabled.

  Greetings. I noticed a lot of posts about a similar situation, but I don't seem to find the answer that works for me. The skinny: using Windows 7. I connected to XBox live through ICS with my laptop. Hotel has wireless and I connected to it. Then, I followed the instructions and my wireless for sharing of the value. From there on, I wired XBox laptop w/ethernet cable and XBox settings manually configured as IP address, subnet, gateway, & DNS address mask. It was working fine the first day. During the next two days, connection was super slow... but it still worked. The problem does not seem to come from the hotel's Wi - Fi connection. It was the laptop for XBox it seemed. So I did some reading more and got more stupid than usual. I tried to 'Bridge' of the LAN and wireless connections to see if I could get better results. I'm not too good sense of course so I didn't know if it would work. There can be no. This is why I removed the two bridge connections and even removed the icon of "Bridge". I tried to go back to the original configuration that has worked and that's when I started getting the "connection sharing Internet can not be activated. A LAN connection is already configured with the IP address that is required for automatic IP addressing"message. So now, when I check the share my wireless, I have that message and it won't share. I'm lost! I tried "ipconfig \all. I tried "netsh winsock reset." Nothing seems to work. I don't know if I'm doing something of out of order which does not allow local network setting. I mean... what must be plugged in the ethernet cable, or even not at all, and when it is, that the parameters of the Xbox is? I even put the XBox failing to see network settings if I could start to this end. If it was not obvious, I'm still able to access the internet wireless and wired. This is something crazy and so far, none of my smart friends have been able to help! Thanks in advance for any of yours. As I said, I'm really not good with this stuff so if you have answers, please show idiot as I am a fool proof. See you soon!  Jim C

  Hello

  You can follow the Windows Help article below and check that ICS is set up correctly.

  Set up a shared Internet connection using ICS (Internet Connection Sharing)
  http://Windows.Microsoft.com/en-us/Windows7/set-up-a-shared-Internet-connection-using-ICS-Internet-connection-sharing

  If ICS is not configured correctly, then you must post back the result by running the following command.

  To do this:

  a. click the Start button.
  b. type cmd in the search box.
  (c) in the command prompt, you must type ' ipconfig/all ' and check the result.

  Take a screenshot of the command prompt and post.

  To take a screenshot, you can follow this link below.

  Use capture tool to capture screenshots
  http://Windows.Microsoft.com/en-us/Windows-Vista/use-Snipping-Tool-to-capture-screen-shots

  Thank you, and in what concerns:
  I. Suuresh Kumar - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  

• Vista internet connection sharing configuration

  Please take note that I have already visited the URL for windows: http://Windows.Microsoft.com/en-us/Windows-Vista/using-ICS-Internet-connection-sharing

  I did the following:

  • Configured Internet connection service.  Service is set to automatic, running, recovery failures all the value zero seconds
  • Connection to the LAN is configured as 'shared '.

  BlackBerry Curve 8330 is connected the USB cable live and is considered 'removable disk' records can be seen

  The Blackberry a browser opera mini version 4.2 installed but cannot connect to the internet.  I ask for advice on how much of the configuration is proveable and how much more needs to be configured to connect to the internet. Concrete measures to solve the problem so that I can work on what remains to do research

  Hello

  I suggest you to send your application in Blackberry forum for better support.
  http://supportforums.BlackBerry.com/T5/General-support-forums/CT-p/GeneralSupportForums

• Internet Connection Sharing via Intel my Wifi

  Hi, I use Alienware m14x with windows 7 Home premium 64-bit
  I have just restored my laptop factory. Configure my wifi profile. When I click on share my internet it gives the error that has first of all connect to the internet. I am already connected to the internet, therefore a ground of firewall problem please help with a few problems of settings.
  Thank you.

  Hello SiddheshGajare,

  Which Wi - Fi utility you are trying to share the connection to help?
  It is perhaps that the connection is not able to share with other devices.
  You can look into trying sharing instead of use the Windows internet connection Wi - Fi connection utility:
  http://Windows.Microsoft.com/en-us/Windows-Vista/using-ICS-Internet-connection-sharing
  The instructions also apply to Windows 7.

• my internet connection sharing went :((

  my internet connection sharing went: (when I make connection ad - hoc tab "turn on internet sharing" still there... but this time I started to do a special tab disappeared...:(je dois redémarrer mon pc et tourner sur internet en partageant (cocher) on my modem to broadband, but on my ad-hoc don't always 'no Internet'... I need your help :(())

  Hello

  Don't forget to put power - off wait a few minutes - then power and then turn on the modem
  router and other computer that you share the connection.

  ----------------------------------------------------------------------

  Try the system restore before that happened:

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  ----------------------------------------------------------------------

  The routers are much easier and they don't cost much. You may need to reset upward
  the ICS.

  ICS Setup

  Using ICS (Internet Connection Sharing)
  http://Windows.Microsoft.com/en-us/Windows7/using-ICS-Internet-connection-sharing

  ICS step by step
  http://www.windowsreference.com/Windows-Vista/step-by-step-Internet-Connection-Sharing-ICS-Setup-in-Vista/
  See this thread
  http://windows7forums.com/Windows-7-networking/1037-ad-hoc-Internet-connection-sharing.html

  Windows 7 Internet connection sharing
  http://www.wlanbook.com/Windows-7-Internet-connection-sharing/

  Share Internet access on Windows 7 - video
  http://www.YouTube.com/watch?v=sBAS-a1smFo

  Set up a shared Internet connection using ICS (Internet Connection Sharing)
  http://Windows.Microsoft.com/en-us/Windows7/set-up-a-shared-Internet-connection-using-ICS-Internet-connection-sharing

  Change the settings for ICS (Internet Connection Sharing) Internet
  http://Windows.Microsoft.com/en-us/Windows7/change-Internet-settings-for-ICS-Internet-connection-sharing

  Networking in the first answer sites also have ICS help.

  Set up a computer-to-computer (ad hoc) network
  http://Windows.Microsoft.com/en-us/Windows7/set-up-a-computer-to-computer-ad-hoc-network

  Set up a wireless network without router
  http://www.Microsoft.com/windowsxp/using/networking/setup/adhoc.mspx

  ---
  I hope this helps.