Internet Connection Sharing via Intel my Wifi
Hi, I use Alienware m14x with windows 7 Home premium 64-bit
I have just restored my laptop factory. Configure my wifi profile. When I click on share my internet it gives the error that has first of all connect to the internet. I am already connected to the internet, therefore a ground of firewall problem please help with a few problems of settings.
Thank you.
Hello SiddheshGajare,
Tags: Windows
Similar Questions
-
original title: cannot share internet
I shared my internet via ad-hoc, using my wifi in my laptop running vista 64-bit. It just stoped working and now I get a message saying
"an error occurred while internet connection sharing was being enabled. the dependency service or group was able to start. »
Hello
You can view the article in the Microsoft Knowledge base and check if it helps.
Error message when you try to connect to an ad-hoc connection in Windows Vista or Windows 7: "Windows cannot connect to"
" "»http://support.Microsoft.com/kb/946481
Let us know if you need more assistance.
-
Internet connection sharing (6) error during installation of nintendo wifi connector
"sharing the internet connection (6) error" appears when I try to install a nintendo wi - fi connector (to connect between my wii and computer for netflix). I have high speed dial-up (canada), but apparently can use wi - fi connector to talk about the wii. with the first installation, it worked well enough to allow the wii. but the wii could not connect to netflix.
the first time I had hung it, I ended up uninstalling and now when I try to reinstall it, this error message appears.
When I got the wi - fi connector connected the first time, I did it with my antiviirus running program: the help site suggested to uninstall then reinstall the wifi band program. so this time (after you have uninstalled it), I disabled the antivirus, but now get the error message.
I have a call in nintendo, but fear that it is a problem of microsoft xp.I don't have personal experience with this, but the title claims that it fixes your exact problem: Guide to fixing ' error (6) Internet connection sharing
-
By using internet connection sharing
I'm having a problem using ICS. It used to work perfectly, but then I had to reinstall vista and use my restore disks, and it has not worked since. That's what I'm trying to do. I'm taking a wireless internet signal coming from my router and it sends through my LAN port for the computer of my son, who does not have a receiver wireless on his computer. This used to work properly, but don't work no more... That's what I've done so far:
I turned on ICS on my wireless connection. I checked all the services I want to be able to have the connection (http, ftp, telnet, etc.). I turned "detect settings ip automatically' on my son's computer. I have a crossover cable from my computer to my son (that's what I used before too). I don't know what happens wrong... someone has any ideas? Please help :)
Hello
Make sure that you are really using a crossover cable and that the side network is up
and running.First step - Ad - Hoc network
Ad-hoc networking
http://windowshelp.Microsoft.com/Windows/en-us/help/0e158c21-4C70-4235-879d-0c9133218e561033.mspx
Set up a computer-to-computer (ad hoc) network
http://windowshelp.Microsoft.com/Windows/en-us/help/293c504f-b944-4d5d-835c-f080129bd5dc1033.mspxHow Set Up Ad-Hoc wireless network in Windows Vista (if you ever want to WiFi)
http://www.home-network-help.com/ad-hoc-wireless.htmlCreate an ad hoc WiFi network secure on Windows Vista (if you ever want to WiFi)
http://www.Intel.com/support/wireless/WLAN/sb/CS-025386.htmNetworking tutorial home
http://www.tehnomagazin.com/computer/home-networking-tutorial.htm
Practically networked - everything you could possibly want to know.
http://www.practicallynetworked.com/Two step
ICS Setup
Using ICS (Internet Connection Sharing)
http://windowshelp.Microsoft.com/Windows/en-us/help/bfd3bd31-82F0-4B9C-9cde-fb92bc2b14771033.mspxICS step by step
http://www.windowsreference.com/Windows-Vista/step-by-step-Internet-Connection-Sharing-ICS-Setup-in-Vista/
I hope this helps.
Rob - bicycle - Mark Twain said it is good. -
Bluetooth network and Internet connection sharing problem
I am putting in place a network via Bluetooth between two computers later with Toshiba Stack installed and to share the Internet connection with the second computer.
On the computer of trees I put Internet connection sharing, and for this reason, it automatically assigns addresses TCP/IP for the Bluetooth Personal Area network (192.168.0.1).
On computer 2, I put everything to get it automatically. Firewall (Kaspersky) disabled.When I connect 2 Bluetooth devices, everything looks fine, the 2nd automatically gets the IP address, I can ping both computers and Internet works also on the 2nd computer, for a few seconds! After that, it appears as the 2nd computer is disconnected from the network... what could be the problem?
In the case of the observer under the System tab, I found information like these:
2nd comp:
The system has detected that the network \DEVICE\TCPIP_{E44D18EB-91F5-4 adapter has been connected to the network and launched a normal operation via the network card.The browser has forced an election on network \Device\NetBT_Tcpip_{E44D18EB-... because a master browser was stopped.
and the 1st model also appears this:
The system has detected that the network Bluetooth adapter... Area Network - Packet Scheduler Miniport has been disconnected from the network, and the network adapter configuration has been released. If the network adapter was not disconnected, this may indicate that it has malfunctioned. Please contact your vendor for updated drivers.In your case, I would look at the following Web site:
http://APS.toshiba-tro.de/Bluetooth/redirect.php?page=pages/HOWTO.html
It lists the following document:
"Internet on PDA via PAN using Notepad as a gateway."
In your case, the PDA is another laptop, but the procedure should be very similar.
I would check the firewall settings later if it still does not work. -
ICS: Internet connection sharing ERROR while allowing IP.
Hi all
My "Netgear" router gives the IP Address of the gateway 192.168.0.1 and my laptop is connected via a wireless connection. When I turn on my connection sharing wireless internet connection, windows xp tells me with the message below:
"When Internet connection sharing is enabled, your LAN adapter will be on use the 192.168.0.1 IP address." Your computer may lose connectivity with other computers on your network. If these other computers have static IP addresses, you must set them to obtain their IP addresses automatically.
"Are you sure you want to enable Internet connection sharing?"When I press 'Yes', it gives me an error:
"An error occurred while Internet connection sharing was being enabled.
Internet connection sharing cannot be enabled.
A LAN connection is already configured with the IP address that is required for automatic IP addressing.My question is, if we can configure ICS service to activate other windows of the IP ADDRESS is required to apply?
Thanks in advance for your help...
I'm sorry, but ICS is completely inflexible and does not change its LAN IP address.
The settings that you found are for something else: allowing unsolicited Internet connection requests to pass through the firewall on the ICS computer to a client computer.
Change the address LAN IP of the router. It is easy to do and will solve the problem.
-
Problem with Vista and XP computers Internet connection sharing.
I have a host computer running Windows XP service pack 3, with an of Virgin Mobile Broadband2Go modem and a laptop computer with Vista. The host computer is connected to a Microsoft MN - 700 via a CAT5 network cable. The laptop is connected via a wireless connection. I'm sharing the Broadband2Go internet connection by using Internet connection sharing. I enabled sharing on the network, on the host computer connection. But the laptop does not connect to the internet. I can ping the host of the laptop, but cannot ping the laptop computer from the host. I have tried everything I can think of, to get the job of network. He worked, until Thursday. Thursday, there is some automatic updates installed on the host computer. They have been updated for security. I don't know if updates of security would have affected the network or not. All helkp would be appreciated.
Thank you
Oscar
It is a facility that is complicated, because the host computer and the MN-700 can act as routers and DHCP servers, making it uncertain given the laptop its TCP/IP configuration. Here are two ways to make it work:
- Use the MN-700 as a router: connect the host computer to the "Modem" port of the MN-700. To do this, interface LAN of the MN - 700 must have an IP address in a different subnet from the 192.168.0.x subnet that uses ICS. The laptop will be able to ping on the host, but the host will not be able to ping from the laptop.
or:
- Use the MN-700 as a point of access only, not as a router: connect to the host computer to one of the MN-700 Ethernet ports and disable the DHCP server integrated of the MN-700. Both computers should be able to ping each other.
-
Problem to create the Internet connection sharing between Windows XP and Windows Vista.
Original title: Internet connection sharing between Windows XP and Windows Vista.
Hello
Recently, I plugged a laptop running Windows XP to a desktop computer running Windows Vista using a standard Ethernet cable with the intention of use sharing of Internet connection. The notebook contains a wireless connection that I've routed to the office via the cable said. While the initial phase of installation went well (I was too lazy to do it manually, so I just used the Wizard "Set up a home or small business network" Windows XP,) I had to turn off the host computer to install a program. When I tried to set up ICS again, I couldn't connect to the Internet by using ICS. After this failure, I tried to configure the properties of TC/IPv4 (IP, gateway by default, etc.) manually, but I still couldn't run. I am able to access the shared host PC and client files. It seems to me that some service essential to the proper functioning of the ICS may be disabled in some way, but it's just speculation, as I have no evidence of such a service. Help would be most appreciated.
Thank you
FG-man
I tried this before using a laptop to share internet with my 360. problem is there was Nat on the router, and it is in contradiction with the ics.
Anyway long story short I did some research on the Internet and discovered that if you're behind a router ICS will be confllict with her, as ICS also does routing. a much better option is to "bridge the conections ' on the laptop.
If you go this route, you need to set a static ip address for the office,
Either that or if you want to continue using ICS put the laptop in the DMZ in the router may help, but it will be less secure.
Hope that this helped good luck
-
I have an Internet connection sharing situation. It worked perfectly until I got a little virus. Then, with the CORRECT settings, when I try to turn it on in Vista "allow the other network users to connect through this computer's Internet connection", I get an error message stating "unable to enable shared access. Error 0 x 80004005: unspecified error. "I checked and overchecked. The settings are OK, it's just my computer that has the problem, the other OS I installed (Windows 7) he shares perfectly. It is not material, it's just because of VISTA. What can I do? I searched on the Internet for 5 days and nothing. People seem to encounter this problem, but no answers, or nobody gives one any solution. Can I reinstall just the ICS service? Is this possible? To correct it, a key "reg", a patch, no matter WHAT? It is really really important. I removed all viruses from my computer. Internet works fine on my computer. What can I do? Please, please help me... Please, I beg you.
Dear engineers,
I have computer (A) where I use Vista Home edition and I have internet connected with the Ethernet adapter, and I have an another Computer (B) when I want to use internet. I did an adhoc network and connected two computers via wireless adapters, but computer B can not use internet b/c on computer A, I can't start Internet - ICS connection Service. whenever I try to start the service it gives following error;
"Service ICS (ICS) on Local computer started and then stopped. Some services stop automatically if they are not in use by other services or programs"
Can you please suggest a solution for this.
Waiting for your response.Concerning
-
Original title: problem with Internet connection sharing
my laptop running on Windows Vista Home Premium SP2 (this one has access to the internet by using the dial-up modem and will to act as a sharer of internet connection or as a host) and the client computer runs on Windows 7 Starter
in a first step, I try internet connection sharing, I've set up an ad hoc network and I just changed my setting modem dial-up on the sharing tab, of course what I change, it of 'Allow an other network users to connect through this computer internet connection' and choose the on Home Networking connection wireless network connection , then my mobile client to connect to a special that I created and portable client connected to the internet via ICSthen the problem came when I restart my laptop. When I tried to use ICS once again, my customer laptop really takes a long time to connect, he continues saying 'identification' side host and client. and after that "identify" is complete, it says ad - hoc connection, I create has "no network".so, I'm a person answer in this forum' Obtain an IP address automatically is the wrong setting on the Ethernet connection. " To return to the sharing tab and unshare the wireless connection. Close all windows network, and then open them and re - share the wireless connection. Who must configure IPv4 for the Ethernet connection properties for:IP address: 192.168.0.1
Subnet mask: 255.255.255.0
Default gateway: no
"DNS server: none.I put this on my laptop of the host, and and I put the IP address on my laptop customer in 192.168.0.2 with the same default gateway as my portable computer host IPand made some progress in this case, when I try to connect host and the client is no longer to 'identify' phase, immediately connected laptop both but my mobile client can not connect to the internet and displays "No Internet access" on the ad hoc network, I have createI tried a lot of things but always completed my mobile client can not connect to the internet and displays the message "no Internet access.
What makes me confuse is first, I try to share the internet connection everything works like a charm, I set up an ad hoc network, and then change the setting on my modem dial-up so he can share the internet connection, and voila, computer laptop client connected to the internet. I change even not all IP settingsBut why after I restart my PC, this problem comes...someone knows how to help me with this problem?Hey, Mimbs,
You can try the similar thread to the next with a possible solution:
Also for reference:
-
Internet connection sharing does not work anymore
I have used Windows Vista Home Premium for 2 years now on my laptop. Internet connection sharing enabled to connect to the internet via my wireless adapter and allowed me to share my internet connection through the ethernet port. He worked for more than a year. All of a sudden 4 months ago Windows Vista doesn't let me share the internet connection more. When I go to networking and sharing Center, click on "Manage network connections" and it shows that my "Wireless Network Connection" is always set to share. So after reading several forums, I clicked on wireless network connections and click right properties. Then I clicked on the sharing tab, to make sure that "Allow other network users to connect through this computer's Internet connection" has been verified and that it is. After that, Windows Vista will not always share the internet. Someone suggested that I double check the IP version 4 and 6 on the wireless and Ethernet connection were defined on IP addresses obtain automatically, and they are. The computer still will not share the internet connection! I even took the manufacturer in the view of portable and made sure my cable modem Simulator wasn't bad. I took it to a computer store and we checked the crossover cable. Everything is fine! What else can I try?
Obtain an IP address automatically is the wrong setting on the Ethernet connection. To return to the sharing tab and unshare the wireless connection. Close all windows network, and then open them and re - share the wireless connection. Who must configure IPv4 for the Ethernet connection properties for:
IP address: 192.168.0.1
Subnet mask: 255.255.255.0
Default gateway: no
DNS server: no
Owner, Boulder computer Maven
Most Microsoft Valuable Professional -
Can someone help me with my problem on the Internet connection sharing?
I have a LAN wired connection but no wifi capability. I managed to share the internet connection from my pc to my phone by using the "Internet sharing connection" using the usb cable and the first day, it works fine and I can use my phone for internet access. Unfortunately, the 2nd day I can't connect and it says "internet is not available.
I am currently using windows 7. I hope some of you can help me thanks.
It is on my pc and it says now no internet access. I enabled the "allow other users of the network to connect to this computer" as what I said the first day, it works very well.
Hello Fritz,.
Thanks for posting your question on the Microsoft community.
We need more information about the issue so that we can help you better.
What is the brand and model of your computer?
Thank you for details on the issue.
This problem may occur because of corrupted network drivers or incorrect network settings.
I would suggest trying the following methods and check if it helps.
Method 1:
Run the network troubleshooting and check.
Reference:
Using the troubleshooter from network in Windows 7
http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7If this does not help, use method 2.
Method 2:
Use the steps described in this article and check the issue.
Reference:
Wireless and wired network problems
http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win81tab1&V2H=win7tab1&V3H=winvistatab1Additional information:
Using ICS (Internet Connection Sharing)
http://Windows.Microsoft.com/en-us/Windows/using-Internet-connection-sharing#1TC=Windows-7I hope this information helps.
Please let us know if you need more help.
Thank you
-
Hello.
With Windows 7, I want to share the network connection Wi - Fi with Bluetooth through PAN (Personal Area Network).
When there are several connections in addition to Bluetooth after opening "Share" tab, I see these connections in the "Home Networking connection" list, but there is no Bluetooth. Then, when there is no connection in addition to Bluetooth which I can share with, there is no tab "share."
Equipment: laptop Samsung NB30:
- Broadcom BCM2070 Bluetooth 3.0 + HS USB Device with the driver PAN ('Bluetooth device (Personal Area Network)") provided by Samsung: Microsoft, version 6.1.7600.16385, 21.06.2006
As I assume there should be means to somehow add "Bluetooth Network Connection" to a list of connections that can be internet shared with.
Also, when I tried to fix this problem manually, other questions are raised:
- There is really no Thoubleshooting guide for Internet connection sharing in Windows 7? I see this document on the site "Microsoft Support" for Windows 98SE, Windows XP - but not Vista and 7.
- When I'm stuck to the administration of the system to the GUI, there is good decision to guarantee a target with the CLI. After searching a command line installation Internet connection sharing, I see no guides for this - only something likehttp://forums.devshed.com/windows-help-34/enabling-ics-under-command-line-89499.html . Is there really no way to set up ICS by command line and I'm forced to use complex GUIs?
So, please help me solve problem BT PAN ICS. But if you reply to other questions, it will also be interesting to read.
Hi LeoniusLeonius,
Here are a few articles using Windows Internet connection sharing (ICS) you can do refers to.
Using ICS (Internet Connection Sharing)
http://Windows.Microsoft.com/en-us/Windows7/using-ICS-Internet-connection-sharing
Set up a shared Internet connection using ICS (Internet Connection Sharing)
Change the settings for ICS (Internet Connection Sharing) Internet
Sharing an Internet connection between multiple computers
http://Windows.Microsoft.com/en-us/Windows7/sharing-one-Internet-connection-among-several-computers
Change which computer on your network connects to the Internet
See if one of the articles will help you in fixing the issue.
Any sharing via command line for internet connection, unfortunately there is no command available to do.
Hope that answers your query.
Kind regards
Shinmila H - Microsoft Support
Visit our Microsoft answers feedback Forum and let us know what you think.
-
original title: error 5 access denied firewall
Failed to start service Windows Firewall/Internet Connection Sharing (ICS) on the local computer. Error 5: access is denied. »
Hi vipin sharmavg,.
1. did you of recent changes on the computer?
2. do you have security software installed on the computer?
See the below Microsoft article and try the steps mentioned, check if it helps.
You cannot start the Windows Firewall service in Windows XP SP2
-
How can I fix Internet connection sharing?
I said that it's corrupted... :-(
Hi Bill SS,.
(1) what is the exact\complete error message you get?
(2) remember to make changes to the computer before the question?
Consult the following links...
How to configure Internet connection sharing in Windows XPTroubleshooting Internet connection sharing in Microsoft Windows XPSuggestions for a question on the help forums
http://support.Microsoft.com/kb/555375
Get back to us with more information on the issue so that we can send the exact resolution.
Maybe you are looking for
-
Shortly after my mini marketing starts switching between screens quickly with no input from me. It seems to be repeat quickly on the button earlier, but sometimes repeatedly switching back and forth between the two screens. This happens randomly. It
-
Error code 80070490? Windows will not find any updates?
I've seen this before, but none of the other post saying how to fix? How can I fix this error? Vista 64 b
-
Error codes: Code 80070005, I cannot update Windows... I used the Unility FixCleaner but I still get the same error message. How can I fix?
-
Wireless network is disabled by the hp connection manager after hibernation, sleep etc.
Wireless network is disabled by the hp connection manager after hibernation, sleep and sometimes when I use the computer. I can't see preferences in HP Connection Manager to fix this, or Windows power management. What is the solution to keep the netw
-
using windows 7 homepremium. He asked me to update some time ago, but I did not do at the time, and now her even not try.