ICS voice entry Bug?

Similar Questions

• Google keyboard - Voice key entry

  Has anyone noticed that when they select the voice entry key (long press comma and select the microphone) it does nothing? It's using the keyboard of Google stock. I do not have something good, or it just not work?

  
  

• Benefits of rooting

  Hi friends,

  Previously I rooted version 2.4 bread. Now, I've moved to ics.i'm waiting for a direct method to root my phone. Although Ics has some bugs, I like CSI, its new user interface and really good battery life. How is the life of performance and battery life of the phone after rooting?

  There is no direct method for root ICS 4.0.4 for the moment

  Here's how the good root

• Warning (continued) Image Patch 5.0.1

  As others have seen when updating to Patch 5.0 .1 I'm also getting the following warning:

  "There is a problem with your environment because the Application Express files are not updated! For the version 5.0.0.00.31 files were loaded, but 5.0.1.00.06 is expected. Check that you have copied the images directory on your application server by following the instructions in the Setup Guide. »

  
  

  My problem is that when I followed the instructions of Patrick at APEX 5.01 (first Patch to APEX 5.0) is now available! Again, it does not solve my problem. I still see the popup when I go back to the login page. If everyone did not have chance to do a force refresh?

  I also checked my application to see if the child entry bug works only not with badge has been resolved and it does not always appear as a badge.

  
  

  My configuration: Using SST

  Database: 11.2.0.3.0

  APEX Version: 5.0.1.00.6
  

  Hello

  in this case, I would like to ask if you really correctly copied the images in the Group of hotfixes ;-) directory

  What is returned if you enter http://your-domain/i/apex_version.txt in the address bar of your browser?

  Concerning

  Patrick

• Help-> Flex Start Page does not open the Start Page

  Help-> Flex Start Page does not start Page.

  I see several entries bug concerning this resolved, but no description of what I can do about it.

  I use Flex Builder Professional on Windows XP

  I heard that this may be due in Internet Explorer when the popup blocker is enabled. Turn it off so popups are allowed, and can load the Flex Start Page.

  If this post answers your question or assistance, please mark it as such.

• Bug really bad iframe, caused by the Magic Mouse or other design Apple entry

  Hello world.

  I found a very annoying bug that can be reproduced only by entry legacy Apple in Safari.

  If the parent container has a fixed height and overflow: scroll, then the inner iframe is not properly scrolling. He could only scroll down, or only to the top. But not at the same time.

  Video: https://www.youtube.com/watch?v=2IpjAbWgbuc

  Demo: https://s3-eu-west-1.amazonaws.com/plio/other/iframe_scroll_safari_issue.html

  I need to use the iframe to display the content of the documents converted to business customers. Many of them use Safari, it is really important.

  Tested in Safari Version 9.0.3, 9.1.1, OS X El Capitan 10.11.3.

  It is a forum for user help. You do not discuss Apple here.

  To submit your comments directly to Apple using this link http://www.apple.com/feedback/

• Firefox does not not at the mouse entry properly. Bug?

  Random frequent time Firefox 10 will cease to respond to mouse clicks.

  I can't click inside the fields on the page, also the address bar and the search bar of FF do not respond. When I move my mouse over them, the point of the mouse 'Text' appears, but when I click on the input box is not active the icon thing flashing text. If I double click on the address bar, it does not select the current url, as it normally would.

  Video controls flash are not able to click. The play/pause button cannot be clicked. The volume cannot adjust. Full screen cannot me input or output (if the mode full screen is enabled before entry-stop mouse works).

  To get the mouse entry at work, so that I can type in the text boxes, or use the controls in the flash player, I have to click outside of Firefox. Which means that I have to click on the Windows taskbar, or switch to another program.

  I tried to get a screen recording of this question, but every time that I turn my entry fields/flash video recording software before reagent. Assuming that this is because the recording software becomes active on Firefox. And as I have indicated above to switch to another program, and then back to Firefox allows fields/cards entry videos work again.

  I thought that this could be a problem of Mouse/touchpad; I reinstalled my Wireless Mouse Software, tried a USB mouse and reinstalled my Touchpad software, but nothing seems to fix the problem.

  I also experienced this "bug".

  Report bug that cor - el related you ( Bug: 718939 ) you will find a link to a version Patched in Firefox 10

  • The Version connected (located in the comment 40)
    • Note that this is not a version of Microsoft Office.

  The task has worked for me and solved the problem. Unaware of when an official challenge will be available

• 18/09/2012 is no sign yet of ics bug fix, I wonder

  Well, we are in the middle of September, and still no bug don't fix for ics I wonder if the bike is jump a quite bug fix for jelly bean guess is it possible other thoughts on this

  I don't really have problems with mine in all but it seems to be of those who are and it was supposed to be a fix mid-August rumours anyway so I just thought hmmm I wonder if they just push jelly bean instead of a perhaps frozen bug fix bean fixes some of the bugs reported in the first place

• BUG? Digital command resets all other entries with non-standard display format

  I found what I think it's a bug with a digital command on a non-standard display format.  I have the display format '% dW' value (an integer followed by the letter W).  When I enter a number, it works, but if I then pull together the same number, the digital command resets to 0.  This continues to alternate as long as I have to enter the same value - a single entry will be right, the other resets to 0.  LabVIEW 2009 SP1.  The VI didn't even need to run to see this behavior.  If I use a value change event I also see this - the 'New' value will be alternately 0 even if not what I entered.

  

  I had someone contact me about this today.  Just as a follow-up, this CAR has been set in 2011.

• Impossible to wire to new entries on a block of PID in a target RT - bug?

  When I increase the number of entries on my block of PID in the aim of RT, new entries may not be wired. I can add "Manual control" to the list, but there is no arrow next to the name, and it is not something that can be plugged. If I change the PID block to contain no entry and then resize to default entries, only the error 'en' can be wired and more. Is this a bug? I'm using Labview 8.6.1 and install the 8.6.1f patch did not help.

  Thank you
  Jeff

  Contempt: I knew not that by ticking the 'Visible?', you must also change "Data source" more of "Terminal" If you really want to do something with it.

• bug in iOS? startup-config + command access-list + an invalid entry detected

  I posted this yesterday in the newsgroup usenet comp.dcom.sys.cisco and received no nibbles. If I did something incredibly stupid, please do not hesitate to advise.

  Cisco 827

  IOS (TM) C820 software (C820-K9OSY6-M), Version 12.2 (8) T5, RELEASE

  SOFTWARE (fc1)

  I'm looking to use a host named in a more extended access list. The

  script I copy startup-config contains the following entries:

  ! the 2 following lines appear at the top of the script

  123.123.123.123 IP name-server 123.123.123.124

  IP domain-lookup

  ! the following line appears at the bottom of the script

  120 allow host passports - 01.mx.aol.com one ip access-list

  When I reboot the router, I saw the following message:

  Translation of "passports - 01.mx.aol.com"... the domain server (255.255.255.255)

  120 allow host passports - 01.mx.aol.com one ip access-list

  ^

  Invalid entry % detected at ' ^' marker.

  It seems as if the entrance to the server name of the router is not processed

  prior to the access list. I can not even check with

  router02 access lists 120 #sh

  makes the access list entry * not * exist.

  But when I manually type the entry in the router I see the

  Next:

  router02 (config) #access - list 120 permits Passport - 01.mx.aol.com ip host

  any

  Translation of "passports - 01.mx.aol.com"... the domain server (123.123.123.123)

  [OK]

  and I can confirm its creation:

  router02 access lists 120 #sh

  Extend the 120 IP access list

  allow the host ip 64.12.137.89 one

  I have to do something incredibly stupid. If necessary I can post the whole startup-config, although it is quite long. (I don't know if the same label/common sense if apply here as apply to newsgroups usenet. i.e. post us actual ip addresses in our configs or must they be edited?)

  Any help is very appreciated.

  Hello

  Currently IOS does not use DNS - names in the ACL for the saved configuration / running.

  When you type in a list of access with a domain name we he looks up and replaces it with the IP address. I remember seeing a bug No. recently request this feature but I don't remember one bug id # now.

  Router (config) #access - list 187 ip allow any host www.cisco.com

  Router (config) #^ Z

  router #show run | 187 Inc

  IP access-list 187 allow any host 198.133.219.25

  router #show worm | split 12

  IOS (TM) C800 Software (C800-K9NOSY6-MW), Version 12.2 (13) T, RELEASE

• Please share your entries on Eg1 and Eg2 dependence of voice messaging port to be hardware based or can be added on a basis of carta ala?

  Hello

  Please share your entries on Eg1 and Eg2 dependence of voice messaging port to be hardware based or can be added on a basis of carta ala?

  1 pls correct if wrong, the number of voicemail ports depends on which model of supported connection of the unit hardware is selected. In addition, the number of voice messaging ports cannot be added as a carta ala and it comes with the hardware.

  Eg1; with the unit Connection8.6 on MCS7845 standalone server would support 250 voicemail ports and if the connection of the unit is used in active-active mode then total 500 voicemail ports would be available with the cluster of connection of the unit.

  Eg2; On a platform of the UCS, the UCS C210 M2 Server connection unit 8.6 with capacity of 10,000 EGGS of voicemail, the voicemail ports would be available:

  (i.) the limits of stand-alone Configuration:

  • 150 ports G.711 and G.729a (combined TUI, VUI or TTS)
  • 35 ports iLBC or G.722

  (ii) limits for the active/active Cluster Configuration:

  • 300 ports G.711 and G.729a (combined TUI, VUI or TTS)
  • 70 ports iLBC or G.722

  (iii) EGGS during model for the Connection8.6 with 10000 EGGS Voicemail capacity 300 GB HARD drive unit is installed on UCS C210 M2 server, he would in his own assign vCPU = 4, RAM = 6 GB, vHDD = 300 GB 150 ports of voicemail and.

  If more than 150 voicemail ports are necessary, then we can have the Connection8.6 of the unit using the active/active mode, then 300 voicemail ports would be available.

  However, if the number of necessary voicemail ports is more than 300, then need to install, Connection8.6 20 000 unit model voicemail OVA on UCS C210 M2 Server capacity. This model has according to the capacity of voice messaging port:

  Stand-alone Configuration limits:

  • 250 ports G.711 and G.729a (combined TUI, VUI or TTS)
  • 60 ports iLBC or G.722

  Limits for the active/active Cluster Configuration:

  • 500 ports G.711 and G.729a (combined TUI, VUI or TTS)
  • iLBC 120 ports or G.722

  Concerning

  Sumit

  There is a hardware support and licensing aspect for the number of ports.  From a support perspective, the number of ports is limited by the physical server hardware (e.g., platform) or virtual resources (i.e., as specified in the files of EGGS).  However, the number of ports, you can configure is also based on how many ports you are licensed for the.  For example, you can have a server that can support 250 ports but if your license file contains only 16 ports then you will only be able to configure 16 ports on the system.  I have a scenario where a customer needed to add more ports; However, I don't think it would be a problem.

  When you talk about port capacities for the connection of the unit, I would recommend that you focus more on the ability of the server port unique compared to the ability of the cluster for normal operations.  Connection of the unit is designed as a cluster in active / active in the intention to provide 100% failover of services if a server is offline.  The recommended design is that the Subscriber must manage all calls with the possibility of overflow to the transformation Editor.  IOW, if you want to support 500 simultaneous calls on a consistent basis but each server is capable of supporting 250 ports on its own then only a failure of a server would immediately block 50% of services.

  Hailey

  Please note the useful messages!

• Possible bug? : External input (Type, number): failed to enable the 'Entry required' property presentation User Interaction tab

  Are people capable of reproducing the following, or is it just me?

  Problem:

  Impossible to activate the agent of property entry for an external input of type number in a user interaction as is not not but can define required entry of type string. This seems to affect interaction element user as well as the workflow if the number data type is used.

  Version: 4.2.1 but think it goes further than

  To reproduce for workflow entries:

  create a workflow, add entry named TestingNumber of type number and another called TestingString of type string.

  Switch to the Presentation tab and set the required before TestingNumber its default property (required entry is not for number)

  Result: Unable to set the terms of ownership of number but cannot for string

  To reproduce the element of user interaction

  Drag a box to design workflow user interaction element aon add external called TestingNumber of type number of entry and another named TestingString of type string.

  Switch to the Presentation tab and set the required before TestingNumber its default property (required entry is not for number)

  Result: Unable to set the terms of ownership of number but cannot for string

  It seems that it was possible before:

  In the workflow to Remove Instant excess in library/vCenter/Virtual Machine management / cliché. In the element of user interaction "Want to delete snapshots" the presentation tab has a number called "numberOfSnapshotLeft" which has a set of properties of entry required. screen attached.

  Meet others similar: http://communities.VMware.com/message/1848542#1848542 last posting mentions a similar case of not being able to establish the required entry of number but cannot string.

  Is this by design or a bug with my environment?

  Properties listed for number	Properties Sample referred to string

  
  Input parameter see theInput parameter see theHide the parameter inputHide the parameter inputPredefined responsesRequired entryPredefined list of itemsPredefined responsesDefault valuePredefined list of itemsMaximum number of valueDefault valueMinimum number of valueMaximum string lengthNumber formatMinimum length of the stringData binding.Custom validationData bindingCustom validationMulit

  It was available in earlier versions of the vCO and was withdrawn "by design". I don't remember what was the explanation. I worked around it by using other properties of validation such as min / max, or a custom validation.

  You can open a support call if you want the official response.

  Christophe.

• Captivate 4 text entry box Bug (?)

  Hello

  I'm really not sure if it is indeed a bug, or I could just be missing something else.

  I created a very simple project of 30 slides in Captivate 4 with some text entry areas. What is the peculiarity of the ETB, is that they contain a = (equal) sign which must be validated, e.g. = New.  I publish the project in AS3 and whoooah problem occurs.

  I enclose below a screenshot of the published output.

  Have someone else encountered this problem?

  I also discovered that when I move to AS3 to AS2 there is no problem at all.

  BR\\

  -Miguel

  

  If the problem is resolved by deleting the = character in the text box, then I would say that Captivate is tripping over it as if it were a piece of code.

  I would call it a bug, but I know that there are other characters and symbols which have been found to cause problems.  I put the brackets [] once in a CC text and that polluted a project as well.

  Save as a bug or feature request and see what happens.

  In the meantime, you may need to find another way to convey your point in the lesson without using this method of text box?

• [Bug]? Beware of the evolution of your entries in table...

  Forums snub research related but different issues, so this is: is this another leak memory graphic or I missed something?

  The problem is simple, although I doubt it appears often.  If you ask a chart, its use of the space data memory must reflect what is needed for the history of the times ranking two.  However, any when you switch inputs between scalars and tables (does not seem to matter what type, or what size for berries, and I was testing with empty bays), the chart takes another entire buffer (history x 2), and data space grows from this amount.  If you come back, it grows again.  You can change the dimensions of the matrix, remove your entry and a new one of the same "order" of wire, or do any number of other things, and the data space is fine.  But once you make this specific switch, the data space is growing.  Everything I tried, there is not a way to free this memory, even by removing the graphic of the VI, except to CTRL + Z all the way around before you inputs wired.  If you closed or did a bunch of work later, I don't think that there is a way to recover, and it is not get cleaned up with a reboot.

  Of course, this probably has not yet arrived on the radar of anyone for several reasons, but we are often dealing with very large data sets, and I discovered this in a chart with a history of 1 M.  (On a 32-bit computer, not less.  Why even they those more)

  I have screenshots available if anyone is interested, but I have to shoot and crop before they are useful to someone else so I don't put everything here.  I haven't searched deep enough into VI scripting to find a programmatic way to see the distribution of memory usage - on that note, does anyone know how?- so I have no excerpts, either.  I'll be stuck in the lab so I'll be slow with the answers, but I'll be anxious to hear if anyone has any suggestions or foreknowledge of it.  Thank you!

  LV of the dad to keep history to support the "Nations United-do."

  Only possilbe workaround would be to change the number of steps of the UN - do from scratch?

  Ben