Warning (continued) Image Patch 5.0.1

Similar Questions

• retrieve and record continuous images in labview

  Hello

  I use the NI 1744 smart camera to capture and record continuous images of a moving object. My smart camera is detected in MAX and made the seizure of an image. But when I use the attached file of VI in labview, the smart camera is not detected, only the webcam is detected and a video can be generated using the webcam. Please help me detect the NI 1744 smart camera. I will be grateful.

  Hello

  Your smartcam is not directly accessible from your PC because it is a remote device.

  Create a project in real time to access your camera.

  Have a look here: http://forums.ni.com/t5/Machine-Vision/Error-1074397145/m-p/535230/page/2?view=by_date_ascending

  Concerning

• Continuous imaging using vision builder

  Hello, I use NI 1744 and want to know how to get and record continuous images using Vision Builder. I am in a position to acquire and maintain a single image but cannot acquire continuous images.
  Looking forward for your help.

  Bürki,

  You try to save the images continuously as a movie?  This is not supported in VBAI, however if you want to align continuous images individually you can try to change your pattern of State inspection to repeat your current inspection and the transition to the stage stop only after that your current inspection was conducted a defined number of times.

• Cisco Custom Image patch

  Hello

  I installed a custom Image Cisco ESXi 5.5 in a UCS C220 M3 and I would like to know if I can install patches using Update Manager as I do with a default image. I don't know if I'm having problems because some patches to update the drivers of ESXi and could, for example, replace the Cisco enic and the fnic.

  I know that HP and Dell have their deposits that I can use with the Update Manager, but can not find something like that for cisco.

  Thank you

  Hi theire,.

  so in recent years, I stayed away from custom provider Isos. Reason is that Vmware is not happy with the custom ones when facing problems. They are pointing to another seller trying to manage Ticket support.

  As for that so I just used for years a clean default Vmware Image as well as all the necessary drivers I inject later. Manually or via the Update Manager.

  Had more problems with Isos by default then with fully customized supplier ones.

  But back to the Question.  If you want to update the driver for Cisco, then you could download those most recent supported because you're model and add in you're Manager Update.

  Best regards

  Max

• Create a continuous path using a base image? (son of barb e.g., vines, etc.)

  Is it possible to create a brush that makes a stroke which is a continuous image and not just a picture instantiated as usual?

  I saw brushes that already do it, I can't find information on how they do it.

  Here is one Example of

  Any help is appreciated!

  What you want would be very practical; You must put in a feature request. Until, however, you may be able to find a dynamic combination of brush that would give the same type of appearance. It must be a lot an articles out there on this.

• Strange worker has no reasons when applying the patch 17529626

  Dear all,

  I am applying the patch 17529626 on platform EBS R12.1 Linux X 86-64. So I am facing the following problems:

  1:

  An error occurred during re-Association of the application programs.

  Continue as if it was successful [No.]: Yes

  I answer 'Yes' to continue such patch recommended in some other discussions of Oracle.

  2: after spending the step that precedes the adpatch blocks in the following lines:

  IMPOSSIBLE: folder ap_holds_all.xdf worker 1.

  IMPOSSIBLE: folder zx_import_tax_lines_gt.xdf worker 2.

  ATTENTION: Fix the worker failed above the Manager to continue.

  
  

  I checked the logs of the worker, and I got the following:

  1:

  INFO: An additional column ATTRIBUTE7 exist in the target database

  INFO: An additional column ATTRIBUTE8 exist in the target database

  INFO: An additional column ATTRIBUTE9 exist in the target database

  INFO: An additional column LAST_UPDATED_BY exist in the target database

  The AP_HOLDS_ALL table is absent from the LAST_UPDATED_BY column

  WARNING: The missing column is NOT NULL and there is no default to apply

  Add a nullable column with the statement

  Executing statement

  ALTER TABLE AP. ADD AP_HOLDS_ALL (LAST_UPDATED_BY NUMBER (15) NULL)

  Start time for the above statement is kills Sep 20 23:42:21 THIS 2015

  End time for the above statement is kills Sep 20 23:42:21 THIS 2015

  Error in the statement ALTER TABLE AP. ADD AP_HOLDS_ALL (LAST_UPDATED_BY NUMBER (15) NULL)

  Error message is ORA-01430: column being added already exists in the table

  Error code is 1430

  ==========================================================

  Appeals to the utility function. Return code = TimeStamp [1] = [Mar 20 Oct 23:42:21 THIS 2015]

  Update task with status 1

  AD worker error:

  The utility FndXdfCmp returned the error for the task above.

  AD worker error:

  The above program has failed.  See the error messages listed

  above, as appropriate, or look at the log files and output of the program.

  When the worker has no time: Tuesday, October 20, 2015 23:42:21

  Assignment 2:

  INFO: An additional column ATTRIBUTE7 exist in the target database

  INFO: An additional column ATTRIBUTE8 exist in the target database

  INFO: An additional column ATTRIBUTE9 exist in the target database

  The ZX_IMPORT_TAX_LINES_GT table is missing the column ATTRIBUTE1

  Executing statement

  ALTER TABLE ZX. ADD ZX_IMPORT_TAX_LINES_GT (ATTRIBUT1 VARCHAR2 (150) NULL)

  Start time for the above statement is kills Sep 20 23:41:59 THIS 2015

  End time for the above statement is kills Sep 20 23:41:59 THIS 2015

  Error in the ALTER TABLE ZX. ADD ZX_IMPORT_TAX_LINES_GT (ATTRIBUT1 VARCHAR2 (150) NULL)

  Error message is ORA-01430: column being added already exists in the table

  Error code is 1430

  ==========================================================

  Appeals to the utility function. Return code = TimeStamp [1] = [Mar 20 23:41:59 Oct THIS 2015]

  Update task with status 1

  AD worker error:

  The utility FndXdfCmp returned the error for the task above.

  AD worker error:

  The above program has failed.  See the error messages listed

  above, as appropriate, or look at the log files and output of the program.

  When the worker has no time: Tuesday, October 20, 2015 23:41:59

  So I checked the two tables for these columns:

  DESC AP. AP_HOLDS_ALL: LAST_UPDATED_BY NOT NULL Number (15) exists

  DESC ZX. ZX_IMPORT_TAX_LINES_GT: Attribut1 VARCHAR2 (150) exists

  Now, I'm confused and I don't know how to solve this problem, please help?

  In addition, I tried to restart the worker through adctrl, they have been restarted but still runing for a very long time!

  Thank you very much for your help!

  Concerning

  Moussa

  Please check

  Errors in applying the Patch 15966842: R12. AP. B (Doc ID 1535742.1)

  Patch is different but the error is the same

  concerning

  Pravin

• Forest line continues speeds and zoomed out or say NO, but should?

  Here's my simple problem that I can't solve.

  I'll try to be as detailed as possible because I don't know what step needs to be corrected.

  I would like to create a view of the landscape seen by someone on a sled ride down the Hill.

  It starts with a winter in extreme forest clogged then the trees begin to move to the left so slightly, then speed up to the bottom of the Hill and then decelerate and zoom back a fine on the horizon line while slowing, but still moving to the left of the screen.

  How I decided to create this scene:

  1. I created a nice multi file layers in Illustrator with all the trees that overlap between them. The file is the width of the artboard maximum authorized by the Illustrator.
  2. I imported this file multi Illustrator layers into After Effects as a model with separate layers.
  3. I assigned slight movement in the layers of right left at different speeds. He adds a dimension to the view you see a line of trees behind the other at a slightly different speed. This step does not seem to create problems.
  4. I continued in the construction of the continuous line of trees extending to the right by duplicating imported Illustrator layers until I've reached the limits after effects Comp size of the canvas. I think it's to 30000 or 60000 pxls. The reason why I need big trees is because at the beginning of the animation we see at the very end upward with all the leaves and the branches visible. Then the line of the forest begins to move to the left and accelerates.
  5. Finally, it accelerates and zoom at the same time enough to end on the right. At that time, the trees are 50% the size of the screen. Reimport the layers of my tree and perfectly match them the couture and affect the speed and if it continues to pass in front of the Viewer to the left of the scale and I wander into perspective.
  6. And now everything goes wrong. I have perfectly match the original line points of tree and the extra trees limit. I see that well, they affect each other in the beginning of the movement and at the end.
  7. However, unexpectedly in the Middle, they start to overlap and move a little faster. For example: the left end of the second line of forest key the right end of the first line of the forest initially to 10 sec and it touches the same to end at 20 sec. However, at 15 sec it accelerates and directly past the right end of the first line of the forest. I tried to fix it by doing a keyframe to 15 sec and harmonizing again. It has two small jumps 12.5 dry and dry 17.5. If I continue to overlay on between frames the left end of the second line of the forest continues to make small jumps between the two. If I try to set the zoom at the again it messes up everything. I have set up my anchor to the left of the layer.
  8. I thought that the problem is with scale, so I did the 3D layer and began to cut a Z dimension but got the same result. The layers of jump each other and it does not appear as a continuous movement.
     POTENTIAL PROBLEM: I assign simple ease, facilitated in a deceleration, so my acceleration and deceleration were nice and smooth movement. However I tried to match the speed and the speed in the window options Key Frame (double click Alt on PC opens this dialog window) between the original and the extra lines of forest.

  I can't make this line of forest long enough in a static window that I arrived to the limitation of the width of the canvas size after Efffects. I need very large because it starts at extreme close and then zoomed out to extreme and a horizon.

  I can't make a moving line and keep patching up as movement is inconsistent and lines beginning to speed between keyframes and overlap.

  I have the problem, it's the combination of the right side to the movement of the left and the zoom motion (which I tried both ways: scale layer to a 2D layer and the Z Dimension in the 3D layer) but I can't match even the linear speed of the lines of forest from right to left. There may be a problem with how I'm trying to match it.

  I even rebuilt the entire project if anyone can list the steps how make a continuous line of patched up items synchronized, so that they seem like a continuous image line.

  Difficult to really grasp the situation without a few screen grabs, but some general thoughts:

  If all your elements are the vector art in Illustrator, the scale should not be a factor.  Set your Illustrator layers to continuously rasterize, and you get too close you like the layers with the camera and they will be always strong.  So you can work on a set of more small scale and not go beyond limitation of 30000 pixels of AE.  Which also means that you will not need to frame-match two environments.

  It seems to me that you are overloading the work.  Personally, I wouldn't combine camera movements and the zoom - the potential that ranged from focal lengths will be upset something is too big.  I would just do everything with the movement of the camera, using the X for movement left-right axis and Z axis to get close or continue to your subjects.  After Effects cameras simulate the way cameras of real world work, so it is best to approach the work as a real-world situation.  Build the world, and then animate the camera moving in this world.

  Don't forget that you can use Precomposed/Nested compositions to greatly simplify your work.  Make a bouquet of 10 or so trees in a model, and then use this nested pre model several times in your main computer.  Don't forget to condense the transformations of the pre comps.

• How to block Images on Web sites

  I want to warn the images on some Web sites. I followed the advice with the right button on the Web page, select VIEW PAGE INFO, then media. I check the box that says BLOCK the IMAGES. I expect to see an icon back UP, but it says SAVE AS. It is where I am lost. A new window opens SAVE the IMAGE title and wants to appoint me the file as favorite and the type of icon.

  I'm puzzled as to why I have create a file on my computer. And it's going to put it under my FAVORITES in Windows? If I do this for different websites, I give each site a unique file name?

  I appreciate your kind advice.

  You need to check Tools > Page Info > Media on what images are hosted.
  It is quite possible that more than one field is used to spread the load of the server.
  Blocking of specific areas is not really recommended as other more important images (icons) could be affected as well and you may forget easily what areas you block.

• Cannot get rid of the blurred image of funds during connection

  There is a jpeg file that I used to have as my background image, or wallpaper if you want, and it keeps appearing as a blurry picture on my login screen. Once I log in, it disappears and my currently selected desktop image appears, but it's an unpleasant image (long story, soap opera), and it bothers me to see for a few seconds. I even trashed the jpeg and emptied the trash, restarted and run Onyx to get rid of all types of caches, but it... I mean... continuous image to appear like a bad dream. Any thoughts on how to banish him this ghostly image?

  Retina, the MacBook Pro 15 inch

  2.5 GHz Intel Core i7

  16 GB 1600 MHz DDR3

  OS X El Capitan (10.11.4.)

  Thank you!

  In root deploy (make sure that you are not the user ~ / library) you will find a file named: com.apple.desktop.admin.png. It is blurry image that was created when you set your wallpaper.

  Replace this file with any image you want on your login page. Be sure to keep the permissions as well as the original file.

• I'm getting error .exe - image incorrect when I start the computer and click on anything

  I keep on getting error bad .exe continuous Image on my Windows XP machine. Help, please

  Hi leondsouza,

  1. What is the exact error message that you receive?

  2. did you of recent changes on the computer?

  3. do you have security software installed on the computer?

  It is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you put the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

• Patch for VDI gold statue

  Hi all

  I tried to find information about the process of applying patches to an existing model of VDI. So far, I know that the best way is to clone the existing image, patch, create a snapshot, create links to VDI pools. But I would like to find documentation for this process.

  Thank you.

  I turn on the same image, make your changes and then do an ipconfig/release and stop and take a new snapshot. Crop against the new snapshot and let the old in case you need to restore. When the string is greater than three start consolidating your shots.

• Patch #9593176 question for R12.1.3, 11.2.0.3 Linux

  Hello:

  When I apply 9593176 on the screen there are messages like the breath.

  =======

  Patches 7229760, collide with the patch currently

  being installed (9593176)

  If you continue, all patches will be restored back and the new patch

  (9593176) will be installed.

  Note: If the hotfix being installed (9593176) is restored.

  It is recommended to put patches in place to come back here (6857221, 4407272, 4526825, 7329300, 7229760,) are resettled.

  Merge the new patch (9593176) and the patches in a conflict in the case

  7229760, is required, contact Support Services Oracle and demand

  a patch: fusion.

  You want to STOP?

  Please answer Y. N >

  THERE

  Bug or conflict files, applying the patch stopped on user request

  ERROR: OPatch failed due to conflict of file/bug

  ========

  Please tell me what I need to do?

  Thank you!

  Sorry, I meant "N".

  Thank you

  Hussein

• Grid control agent 11.1.0.1.0 / WHO 11.1.0.1.0 PSU patch

  Hello
  
  I'm looking to patch SGD 11.1.0.1.0 to 11.1.0.1.4, im however slightly confused about the weather it is patches available for GC officers POWER supply - I don't seem to be able to find something on MOS.
  
  Am I right to think that there are no patches PSU for 11.1.0.1.0 of Agents still?
  
  Thank you

  The deployment of the agent remains the same. You could create a clone of your 11.1.0.1.4 agent again host facilities or continue to patch manually agents to supply FOOD 4 after you have deployed it (I prefer the pull method). In 10.2.0.5, we did a lot of cloning, now that we're done with 11.1 upgrades, it's time for the establishment of a 11.1.0.1.4 clone.

  Published by: Sal Sep 2, 2011 15:15

• Reception of upsampling WARNING at the opening of the Muse

  I am receiving a warning about an image being smaller than the space it's in, it's to be oversampled. Muse warning says I should go to my credit and rework the image.

  I could do this and am still not sure of what image it would be first place in the active panel. If it's the I think it is that I reduced the space in the picture, actually set matching the LxH to the image perfectly and the warning has not disappeared. I closed my Muse and twice to see if this warning would be, and it is not reopened.

  Again, top image - bottom.jpg is now the same size, as it is placed in the div and the warning will not disappear.

  I've attached screenshots of the warning (s)

  1. Is the pixelated icon square in the warnings the warning symbol/image column that Muse is alert me?
  2. Now that I've corrected the dimensions of space that the image it is in, how can I make the warning go away?

  

  Hmmm, Muse is a little weird. I tried the image, which does not remove warnings of reissue of links. I then deleted the image and re-set, and which finally abolished the warning. Problem solved. Hope this helps someone else.

• Auto-pile bracketed raw images?

  When I run the auto-stack panorama / order HDR on a directory filled with groups of media exposure for HDR treatment, bridge issues a warning message "Image is missing preview data" apparently for each image it inspects.  If I click by however many warning messages are up to, finally, the command properly stacked raw images.

  I actually tried the cache feature equip and export, export a cache directly in the directory of the raw images, I wanted to stack.  That did not help.  Still get the same message over and over again.

  Can someone help me with this problem?

  Thanks for both answers.  After posting the question, I tried a replacement online script.  It turns out that there is a Mr provision its free script, with great documentation and more features than the features basic bridge.  I have not tested in detail yet.  However, it seems to work well on a few preliminary test case.  For this script, the user can specify as a stack of target length (generally three for HDR), but also a time span in which exposure should be taken.  Slick!  If you test the script, let me know how you managed.  It looks like it will work very well.

  Here is the link http://www.thephotographicnovel.com/autostack.htm .

  You will find at the bottom, you can load the script, which is well documented in the code and a detailed account in the web page where you download.  Thanks to Anthony van Winkle for a very cool utility!