IdeaPad s10e does not start

Hello! Need some advice.

My Ideapad s10e abrupt does not start. No coolers, no POST, nothing, just black screen and silence.

The last time worked perfectly well, not fell, a no overheating, no had no any liquid spilled on, doesn't have the standby mode.

Does not start with or without POWER, battery, RAM and disk block HARD or the keyboard.

When I plug the PSU the blue LED turns on and when I press ON the button (or arrow) chrome battery led gives a light flash for a split second: these are the only signs of life.

Tried to take out the battery and pressing the power button for a minute, trying to take out the battery for the night - no result.

Since I very rarely use this machine in particular, my suspicion is that battery empty BIOS, so until I have disassemble the netbook completely, I wanted to check if the impoverished the BIOS battery can produce such symptoms.

Any suggestions are appreciated.

Sorry to say this but better to join the local service center at this point.

Tags: Lenovo Notebooks

Similar Questions

  • S10e does not start

    Hello

    I messed up my netbook :-(and need help!

    After changing the BIOS boot order so that the 80 GB HARD drive was listed above the preload disk of 4 GB, I just get a black screen with a blinking in the upper left corner _.

    I tried to remove the 80 GB HARD drive, and then restart, but nothing changes.

    I can't access the BIOS, if anyone knows what to do?

    / John

    Hi johnkvas,

    no access to BIOS?

    have you tried the hard reset...
    .. When no battery inserted & with no power cord
    Press the power button for about 30 seconds...
    .. then plug the power supply...

    What have you tried before? clone the SSD hard drive...?

    cordially KalvinKlein

  • IdeaPad Y530: windows does not start after that laptop went to sleep mode.

    Hello

    More great frustration in my life have laptop brand new, this for me.

    After that the laptop goes into mode 'sleep', I'm not able to go back to Windows. All light are there and watch as usual, but there is no Lenovo Welcome logo or any other sign of normal behavior. I can turn it off by holding the button market / stop, but when I turn back the problem is still there. Windows does not start.

    I was able to go back to Windows that day after leaving just laptop without any power and battery.

    I called Lenovo and they suggested to disable the standby modes use put into hibernation. I did it. When the screen saver started, something went wrong, computer got froze and I had to restart, but then again, black screen and no reaction.

    Anyone have any ideas?

    Thanks for the reply.

    That's what I end up doing. OnKeyrecover does not work either so what spoke on the phone with Lenovo. Then he is gone now for repair.

  • Lenovo Z585 does not start on a DVD - jump directly to Windows

    Hello, I just got a new IdeaPad Z585 from newegg, and I can't figure out how to boot from a disk in the drawer of the DVD.

    I tried to open the BIOS and change the boot order, as well as simply go directly to the start menu. I tried with UEFI both active and disabled, as well as Secure Boot both enabled and disabled. No matter what I try, it does not start in any DVD.

    I try to install Linux and tried different discs and distributions of this. When no even reached GRUB, I tried a Windows 7 installation disc, and even that is ignored.

    What should I do?

    Hello
    The secureboot and uefi must be handicapped simaltaneously. You can try if you haven't.
    Also, could you try pressing the novo button to power your laptop. The novo button is the button of reocovery key a small next to the power button. Has then access Startup menu see if it helps.
    Concerning

  • Lenovo ideapad sound does not

    Lenovo ideapad sound does not work as sound card and verified drivers working properly, earlier that I had uninstalled applications unwanted with revo uninstaller and removed from the list of left over files Scan of revo uninstaller please give any suggesion.

    Hello

    Method 1:

    You can run the fix - it from the following link.

    Solve the problems of Windows Media Player video and other media or library

    http://support.Microsoft.com/mats/windows_media_player_diagnostic/

    Method 2:
    You may need to rebuild the database of Windows Media Player.
    Here's how:
    To resolve this problem, delete the Windows Media Player database. To do this, follow these steps:
    a. exit Windows Media Player.
    b. Click Start, run, type %LOCALAPPDATA%\Microsoft\Media Player and then click OK.
    c. Select all files in the folder and then click on Delete on the file menu.
    Note: You don't have to remove the folders that are in this folder.
    d. restart Windows Media Player.

    Note: Windows Media Player automatically rebuilds the database.

    Method 3:
    Uninstalling and reinstalling Windows Media Player:
    Step 1:
    Uninstalling Windows Media Player:
    a. go to start and in the search type 'Turn Windows has or not'.
    b. click on "Turn Windows features on or off".
    c. find multimedia and uncheck the brand in the face of Windows Media Player.
    d. restart the computer

    Step 2:

    Reinstall Windows Media Player
    a. go to start and in the search type 'Turn Windows has or not'.
    b. click on "Turn Windows features on or off".
    c. find the multimedia functions and place a check mark in front of the Windows Media Player.
    d. restart the computer.

    For more information check out the following link.
    http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-features-on-or-off

    I hope this helps.

  • Siri does not start under macOS Sierra

    I've recently updated to macOS Sierra (public version) and everything seems fine, except for allowing to Siri. I tried to enable the system preferences as well as execution of the Siri application in the application. I even tried to 'facilitation' by selecting in the menu bar.

    In any case it does not start. Upon activation in system preferences, I get "There was an error in the preferences of Siri." and it takes back me to the main view of system preferences.

    Y at - he of the log files that I should be reviewed to determine the cause of this problem?

    Thank you

    Steve

    Same thing here on a MacBook Pro (13 inch, late 2011)

  • Black MacBook does not start

    I have a 10 year old black Macbook, which does not start when a battery is installed.  If it is connected without battery installed, it lights up, but if there is a battery in it, even if it is plugged in, it will get the startup sound and the screen of the Apple gray, then turn off.  I got a new battery and charge it where the charger turned green, but the results are the same.

    Any suggestions?

    It is difficult to say what is happening with this machine, since the time and wear are considerations. I don't know what version of the operating system that you use, but there is a sequence of things you should do - in order of severity.

    http://www.howtogeek.com/217158/what-to-do-when-your-Mac-won ' t-start-up.

  • iPhone hot 5s fees and does not start

    phone is connected to the load.  After a while I checked it and it was very hot.  I unplugged it and now it does not start.

    Have you ever tried to force reboot the phone by holding down the button sleep and home for 10 seconds, until the Apple logo comes back again? You won't lose data.

    More troubleshooting can be found in this article:

    If your iPhone, iPad, doesn't respond or won't turn on - Apple Support

  • iMac does not start after the last security update

    Hello

    After the last update my iMac (late 2009, El Capitan) does not start.

    The iMac starts he accepts my user and password entry, the loading bar stops at 80% and then nothing happens... after I turn off the iMac. Repeating this procedure change nothing.

    Does anyone have any advice for me?

    THX

    INTELLECTUAL PROPERTY

    a solution that helped me:

    Re: security update causes damaged Apps

  • iMac does not start after 10.11.6

    Since the 10.11.6 patch my IMac does not start with my hub plugged.

    Everyone

    I assume you mean a USB hub? What does do when it's plugged in? It starts successfully when the hub is not plugged? If so, I would say that something is wrong with the hub or there is a problem with the port it is plugged or something plugged into the hub.

    Try to plug it into a different USB port on your Mac.

  • MacBook Pro does not start

    I have tried several things but the laptop won't start do not. Power cable showing green light as if the laptop is fully charged. It's like the death does not start.

    Try resetting the SMC

    Reset the management system (SCM) controller on your Mac - Apple Support

    You said "It's like death does not start."

    Does this mean that he shows no signs of life? Indicator light power?

    Hear the carillon?

    Hear the fans?

  • The FireFox 42.0.1 application does not start.

    The FireFox 42.0.1 application does not start. I can uninstall and reload FireFox 37.0.2 and that worked, but now when I load 37.0.1 it installs really 42.0.1 that no longer works.
    I had to use IE 10 to contact Mozilla.
    Year annual should be ashamed of this...
    Can you tell me why Mozilla FireFox 42.0.1 installs but won't work?
    In addition, why FireFox 42.0.1 install when I try to install 37.0.2?

    It is possible that your firewall or other security software blocks or limit Firefox or plugin-container process without informing you, possibly after the detection of changes (update) for the Firefox program.

    Delete all rules for Firefox and the plugin-container in the permissions list in the firewall and allow your firewall to ask permission to get access full and unrestricted, again to install for Firefox and the plugin-container and the update process.

    See:

  • Firefox does not start, the Profile Manager is not available

    Firefox worked, then update it does not start. I tried all the fixes; However, the Profile Manager is not accessible or even present in the execution file. I unintalled and reinstalled several times, but I still can't get it to work. There is no Windows or Norton firewall block so I do not understand. What can I do? I want to use Firefox because it's the best browser; but now I'm forced to use Oscar. It's not terrible, but I prefer the features I've had with Firefox

    I had upgraded to the latest version; but the thought of demotion to the version which worked perfectly. In the end, I had to defrag, do a registry clean and optimization of performance of PC, but for the upgrade launched. So, I'm happy to say that I reply to this post with my Firefox browser. Thank you very much for your help. If all goes well, I won't have problems.
    DoubleD52

  • My MacBook does not start and fires after the Apple logo. I received this error via FirstAid detail in disk utility.

    Hi Apple/community,

    I need a help.

    What it means? Operation failed! My MacBook Pro does not start. It cuts after the loading screen. What will happen?

    Any help will be greatly appreciated. Thank you!

    Well, it seems that your MacBook Pro hard drive has failed and cannot be repaired by disk utility.

    Try to reboot into single user mode: How to start your Mac in single user mode or verbose--Apple Support

    If it works, try to repair the disk with this command:

    fsck -fy

    (http://osxdaily.com/2013/08/07/how-to-repair-a-mac-disk-with-fsck-from-single-us UH-mode /)

  • Firefox does not start - claims that it is already open

    Firefox does not start. He claims to be already running, but that doesn't seem to be the case.

    I tried to create a new user profile, but when I try to open Firefox now, the menu "choose user profile". I tried the new profile and they old, and both give the same error message. "Firefox is unable to use the"Default user"profile because it is in use. To continue, close the Runspace of Firefox or choose a different profile. »

    There is an entry for firefox.exe in the menu of "details" to my task manager and nowhere else. When I try to put an end to this task, I get the following error: "the operation could not be performed - access denied."

    Due to some troubleshooting research, I tried to delete the parent.lock my profile folder, but I get this error: "the action cannot be completed because the file is opened in Firefox."

    I tried to transfer my bookmarks and preferences from Firefox to Chrome, but I had a similar error suggesting that Firefox was already open and I have to close first.

    I also turned off my computer and uninstalled and reinstalled Firefox several times.

    I'd really rather not lose all my bookmarks Firefox, modules, and preferences. I also prefer to use Firefox for Chrome, so if anyone can help me I would really appreciate it. I don't know what else to try.

    My PC runs Windows 10, incidentally.

    Try to delete the parent.lock file in the Firefox profile folder.

    See:

    What security software do you have?

    Try to create a new shortcut on the desktop Firefox and maybe to reinstall Firefox via a clean reinstall (i.e. remove the Firefox program folder).

    If you cannot remove the Firefox program folder and then try to rename this file to "Mozilla Firefox.old".

    • (Windows 64 bit) "C:\Program Files (x 86) \Mozilla.
    • (32-bit Windows) "C:\Program Files\Mozilla Firefox\"

    Start the computer in Mode safe mode with network support Windows (on the startup screen, press F8) to see if that helps.

Maybe you are looking for

  • Why my php export feature does not work in IE and not firefox?

    Why my php export feature does not work in IE and not Firefox? I wrote a web application that contains a SigmaGrid. Grid controls reload, add update delete, print and export to CSV all work in IE8. The export function does not work in Firefox.

  • The screen works not the Satellite Pro a

    My satellite pro, do not know what model because the sticker is worn, but I think its something like L18850When I was with her today, he went to sleep, when I rebooted, it just would not come on the screen.I tried removing the battery, now the Start

  • Pavilion N0X12AV 550-150qe: 550-150qe pavilion N0X12AV model add extra internal hard drive

    The motherboard (pegatron s memphis) there the additional SATA card and power supply (300 watt) has the ability to add something like a Seagate Barracuda 7200.10 HD? I called support and was tossed to 4 people and they could not answer these question

  • What memory can I use for Satellite L20-100?

    Dear Sirs,Please, help me to understand what type of bars of memory is compatible with satellite L20-100? on your site I found the description only for L20 - 101 -.http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/JSP/productPage.do?service=E

  • I need MSGBLAST. OCX. Where can I get it?

    I need MSGBLAST. OCX Control for VB6 Application for windows XP. If it is allowed. Where can I get the same.