IdeaPad y510p synaptics cannot be removed.

Hello I have a y510p Ideapad with synaptics I want to install newset version Synaptics driver but when I try to uninstall the old driver it keep longer display this message:

You must have administrator privileges to uninstall device driver

My connected account's administrator

and I use Windows 8 pro.

I removed in safe mode.

Tags: Lenovo Notebooks

Similar Questions

  • IdeaPad Y510p lights.

    I have recently bought an ideapad y510p from newegg a few days ago. I tried to put in place and all that, try to get rid of programs that came preloaded with the laptop because I don't think that I would need them. I then close, put it down and open again and now it won't turn. It seems that both the power light and the battery are both, as well as the power light, but the screen itself is empty and I can't hear the computer being on. I tried holding down the power button / stop and resetting, as well as the battery and using only the AC to see if things were going to turn on but nothing works. I'm worried I might have deleted something important, but I was especially removal programs related to media players of poor quality and other similar services. It is quite upsetting I just got this laptop and he already died on me!

    I tried this procedure, nothing happened. For some strange reason when I press on and hold the power button, the light if turned off but just because I have my finger light is switched on immediately.

    I'll take the initiative and move forward to send it to lenovo for repair. It is covered by the warranty, so I'm more worried that I am pained and frustrated by the situation.

  • configuration problem IdeaPad Y510p sleep

    About 2 weeks ago, I bought a Lenovo ideapad y510p laptop with graphics 750 m SLI. The first thing I did was to remove the excess of bloatware that comes with the laptop and have had a very positive experience with the machine together.

    Recently, I noticed if I let my laptop idle, he spends in sleep mode pretty quickly. I tried to adjust the Power Options in the control panel to allow the computer to stay awake for as long as an hour plugged and 15 minutes on the battery, but the laptop still go to sleep after having been slowed for only 60 seconds. In troubleshooting, I tried to re - download management utility of the energy that the laptop comes with, but still, he goes into sleep in about 60 seconds. I tried to update my video drivers too, but my computer tells me that they are currently up-to-date.

    I'm not sure what I should try, but if someone else has a suggestion, I'd be happy to give it a try.

    Thanks in advance,

    Jason sheets

    Apparently my problem disappeared!

    It is dificult for me indicate exactly what measures or combination of steps worked for me, but after selecting the option 'balanced' in the power settings and adjust that power to my taste options, my cell phone is always placed in standby mode after one minute ("sleep" mode had been established at 30 minutes). I have re-uploaded Lenovos "Energy management" utility and set the settings to my liking and also installed a windows update. After a system reset, it seems that I have total control over my settings of power once more!

    I don't know if the solution lies in the update of windows, the system restarts or management utility power, but one or more of the following has solved my problem. I hope someone out there finds this helpful thread!

    Thank you very much

    Jason

  • IdeaPad y510p clean Windows 7 install - SSD not detected

    I bought a new Ideapad y510p just before Christmas and I wanted to do a clean install of Windows 7-64 bit.

    I created a USB startup device as required and put the drivers from lenovo on her page too.

    My problem is: after you delete the partitions, the installer of windows 7 do not recognize the SSD more...
    My BIOS is set with legacy of disabled secure boot support.

    Furthermore, when it came to load the drivers, it says no driver signed device not found.

    Someone has an idea of what's going on?

    Hi Clet,

    Since the serial number on this picture, you have the 59375625 model. After digging further, this parts search page and this point merchant does not seem an SSD on the specifications list. If the reception / box indicates that you have a 1 TB + 24 GB SSD, you may need to check under the hood (see pages 38-39 of the hardware maintenance manual)

    Link to photo

    Concerning

  • Replace hard drive SSD in IdeaPad y510p

    Hi all

    I've had the IdeaPad y510p for a while now. This is the model with dual graphics, 16 GB of RAM and 1 TB HDD + 24GB SSD combo. (If you need me to be more precise, let me know). The 5400 hard drive RPM was slow this machine and I recently bought a 512 GB SSDS.

    Is this compatible with the laptop? Of my little knowledge of hard drives, I assumed it was and picked it up.

    Also, how I go on my PC cloning so that everything can be copied on the SSD drive, including start-up and all files and recovery partitions.

    And one last thing. Is the separate 24 GB SSD or the part the 1 TB HARD drive... in other words, can I keep the secondary, more small SSD in as well?

    Thanks in advance!


  • Lenovo Ideapad y510p - memory upgrade

    So since Christmas is coming, I thought it would be cool to upgrade my 8 GB RAm 16 GB my question is: what type of card Gerard, I need my lenovo ideapad y510p? and what I have to change my old memory card aswell if im buying a new?

    Also is it easy to change the RAM cards?

    The worst thing that can happen is that memory does not work with full 1866MTs, but it will certainly work.

    The first is a 2.5 "drive, so you should replace your hard drive with it. The other works, but not as a cache. If you do not want to buy a form mSATA SSD, it is best to install the top OS. Kingston is not the best brand when it comes of SSD. Discover Crucial, Samsung, Plextor. It would be a good idea to read some current reviews and comparisons of the SSD. always keep the highest priority on reliability.

  • Lenovo ideapad Y510P what kind of hard drive is this?

    Hi people,

    I have a question. Today I want to defragment my Ideapad Y510P, but I don't know why I have 5 stations of hard drive? What type of disc is \\?\Volume{3db4... (see photo)

    Gamenick wrote:
    But that disk station is fragmented by 29%, it does not matter?

    As noted that the partition has been created by the operating system. I don't know what (probably for recovery). Since there is a schedule for Defrag I think it will be supported by the system when the time comes. So I just deal with C and D and leave the others alone. The other two partitions should be used by OKR.

  • Lenovo ideapad y510p boot on CD/DVD

    Hello

    Just had the laptop y510p and I am trying to install Ubuntu, so I have this DVD bootable and I wanted to try out Ubuntu before you install as usual, but I can't get the laptop to bot on dvd. On the start menu options, there are only EFI and a kind of network options but not dvd.

    I tried following the instructions here, but regardless of how many times I press F1 during boot, I can't start menu and windows starts directly:

    http://support.Lenovo.com/en_CY/downloads/detail.page?docid=HT036814

    Is it not possible to boot on dvd. The dvd is supposedly compatible with EFI and secure boot ubuntu 13.10.

    I don't understand why there is no option to rearrange devices to boot on my old PC.

    I managed to get the BIOS configuration by pressing the restart and Maj and then selecting settings UEFI firmware and I chance to the configurations of the bios, but still no way to find the option to start on a dvd.

    Any advice? Thank you

    I managed to install ubuntu, the problem is that my cd is defective, here's a blog where I wrote about the steps

    in the case, someone must:

    http://vaxapp.WordPress.com/2014/02/09/install-Ubuntu-12-04-3-on-a-Lenovo-IdeaPad-y510p/

    I found a lot of answers here:

    http://AskUbuntu.com/questions/221835/installing-Ubuntu-on-a-pre-installed-Windows-8-64-bit-system-u...

    Although for Windows 7 the problem is perhaps that he does not support UEFI and or secure boot?

    In windows 8 type ctr + C then the power button, then press Caps + restart and then chose the option help out and something UEFI and you will restart in the bios, then you can change the settings to disable secure boot and/or inherited instead of the UEFI boot.

    When you press F12 is the start menu, but you won't see that entries that are UEFI-compatible (if you are using the UEFI) either CD or USB

  • Install Windows 7 on a laptop IdeaPad Y510p of Windows 8

    My friend just got his new laptop IdeaPad Y510p today, but as he doesn't like Windows 8, I gave her a Windows 7 disc to put on instead (as I know the drive works, as I used it twice before on two different computers). Shut down the computer, put in the disc and went to the bios to change the boot order. Windows 7 download, but when it gets to the startup screen that says "Starting Windows" with three red, yellow and blue balls, he runs for a second, but then freezes and does nothing after that. He tried to restart the computer, but it still does the same thing. He also tried by pressing the button on the side of the computer recovery, but this does not, either. What should we do?

    Hi cheyenne1433,

    Thanks for posting and welcome to the community. Based on what you have posted here, you must change the Startup Mode in the BIOS. I'm here for WOOD > "STARTUP" tab > and change the Startup Mode for Legacy Support. Then save the settings and try to reinstall the operating system again...

    I hope this helps.

    Let me know how it goes.

    Concerning

  • TPM on Ideapad y510P?

    I feel silly even asking this question, but I wonder - is it possible to activate the TPM on an Ideapad y510P with a upgraded BIOS or don't chip that comes with the 510 simply not supported TPM?

    Thank you.

    Hi jetboy2k

    According to all PDFs of this model, I don't think that it has a function to use the TPM.

    However, this thread can help,

    http://forums.Lenovo.com/T5/Lenovo-3000-and-Valueline/H520-TPM-BitLocker/m-p/1237517/highlight/true#...

    Concerning

    Solid Cruver

  • Error 1714, the old version of Java [tm] 6, 33 update cannot be removed.

    OT: Error 1714
    By downloading an update to java, Ireceived following error message

    "Error 1714, the old version of Java [tm] 6, 33 update cannot be removed.

    What should I do now?

    Hello

    1. what operating system is installed on the computer?
    2. don't you make changes to the computer before the show?

    I suggest you try the steps from the following link:

    Error 1714. The old version of Java cannot be removed
    http://www.Java.com/en/download/help/error_1714.XML

  • Cannot add, remove, or edit contacts in the address book.

    Original title: address book problems

    On Windows XP, use Outlook Express, am not able to ADD, REMOVE, or EDIT contacts in my address book... not really sure WHY... any help will be GREATLY appreciated. Thank you very much.

    Hello

    Welcome to the Microsoft community!

    The description of your post, I see that you cannot add, remove, or edit contacts in the address book.

    Please, try the steps from the following link:

    An Outlook Express basic repair kit

    http://support.Microsoft.com/kb/2398839

    I hope that helps!

    Answer please if you need help on this page or the Windows problems.

    We will be happy to help you!

     

  • Windows xp Home Edition running, at the center of the screen it is large icon for media player. in all programs used. Cannot delete, removing appears again at startup. any suggestions?

    Windows xp Home Edition running, at the center of the screen it is large icon for media player. in all programs used.  Cannot delete, removing appears again at startup. any suggestions?

    Hi louMIRANTI,

    ·         Since when are you facing this problem?

    ·         Remember to make changes?

    ·         This problem occurs on other user accounts?

    ·         How to remove the icon?

    Method 1: Check the question on other user accounts and see if the problem exists.

    Method 2: Let's try to run a scan online for any infection on the computer.

    Malicious software removal tool | Protect your computer

  • SanDisk Extreme USB key cannot be removed on Win8

    Hi, I use a SanDisk Extreme 64 GB USB 3.0 drive and whenever I plugged my laptop (thinkpad t430 with Windows 8.1 Pro X 64), and tried to remove it after use, the BONE guard saying that the device cannot be removed, and there is no other programs is going there. But there is none, so how to solve this problem. I tried the USB on Windows7 Pro X 64 drive without a problem.

    see you soon

    Hello!

    Please make a backup of the contents of the USB flash memory, then:

    1 - Turn off the PC.
    2 - Remove the USB key.
    3 - restart the PC.
    4 - Download CCleaner (free, Piriform.com, here x 64 portable version).
    5 - the CCleaner (cleaning and registry) pass to the PC.
    6 enjoy.

    Sincerely, Alfred.  (Google Traduce).

  • Windows 7. The left panel of the start menu icons cannot be removed and arrows don't work - please help!

    The left panel of the start menu icons cannot be removed (when I press "remove from this list" nothing happens) and arrows (see illustration) do not work, that nothing is displayed - please help!

    Try https://support2.microsoft.com/mats/system_maintenance_for_windows/

    If this doesn't help not try to reset the start menu by default:

    1. Right-click on the Start button and click on properties.

    2. Click the Start Menu tab, and then click Customize.

    3. In the Customize Start Menu dialog box, click on use settings by default, click OK, and then click OK again.

Maybe you are looking for

  • I can not use iPhone 6s hotspot

    I can't use iPhone 6s via hotspot to access the internet I already install iTunes and my iTunes and the iPhone are the version lasted, but when I connect iPhone via wifi without success to connect or I try to connect via buletoot USB or failure, he c

  • How to subtract two table of 1 d (uint16) same size

    I need to remove two 1 d (uint16) same size table. with output as follows... x - y = result (EXPECTED) 5 - 2 = 3 4 - 0 = 4 0-4 = 0 2 - 3 = 0 If the difference is less than zero value must be zero. Currently, if I use the digital subtraction... I get.

  • ActiveX CIN

    How to pass a pointer to ActiveX and the VI to the CIN CIN of VI?

  • LabVIEW makes my web page hang when it updates the data of access database

    Hello I'm working on labview (signal acquisition and insertion into a database) and visual studio (Web page design) and I faced this problem when the Web page tries to update the database of microsoft Data Access. Whenever I VI, DQA will acquire anal

  • Configuration of the Interface under... Required main line?

    ASA5520: I'm trying to implement a subinterface for my 2 apart from the IPs (we have 2 pipes entering the data center). I just added a configuration with 2 secondary Interfaces because I didn't have enough ports with the help of g0/3 of our Interface