Identification of CSF of reading information

Similar Questions

• How read information calculate the number of bytes in a megabyte?

  I was under the impression that 1 MB = 1024 KB = 1048676 bytes, but when I use Get Info to check the video file size I see numbers like "473,9 MB on disk (473,910,856 bytes).  Get Info uses a different method, where 1 MB = 1000000 bytes?

  The prefix mega (decimal) was always 1000 x 1000, although when memory sizes were still quite small it was also used as a binary prefix.  The prefix (binary) mebi (1024 x 1024) has been around for awhile and is used more often these days, because there may be a significant difference in the review of larger sizes of memory - see http://physics.nist.gov/cuu/Units/binary.html.  The window read the information shows the size in megabytes, since that's what most hard disk manufacturers use.

• How to read information from the smart phone

  Hello

  I want to get the information from the BB Phone, as the OS version, model munber, IMEI and so on.

  can someone help me?

  Thank you

  String imei = GPRSInfo.imeiToString (GPRSInfo.getIMEI (), false);

  String deviceId = DeviceInfo.getDeviceId)
  String deviceName = DeviceInfo.getDeviceName)
  Soft string = DeviceInfo.getSoftwareVersion ();

• Read and write of series Basic can't read a second time

  Hi, I'm developing my own VI to write and read an iRobot Create.  I based my vi off the coast of the basic series example write and Read.vi I found (on LabView 8.0).  When I run my vi I am able to read information from the beginning to create, but I am unable to read a second time (after a write command).  The second reading should be the same as the first (I checked with the help of another program that is linked to the creation).  I am new to using LabVIEW and I was wondering if there is a common mistake made by trying to implement a series of read and write.

  Thank you.

  First of all, to debug your orders with a program such as Hyperterminal. If it works there, then it should work in LabVIEW. You may need to send a carriage return and newline (\r\n). Your code is not currently set up to do.

  Only do something when a button is basic programming LabVIEW. You can use a simple while loop with a façade that Boolean connected to an instruction box. If you have anything other than the basic version of LabVIEW, you should use the structure of the event. Look at the examples that come with LabVIEW.

• Series read is slow

  Hi people.

  I read information for a device that sends its information to start for the serial port. The attached VI reads and takes the relevant information from it. The only problem is that it is quiet, slow. It takes a few seconds for data display, about 5 seconds. It should be almost instant, as I've seen using hyperterminal. No idea why this may be?

  Thank you

  Select this option.

  The instrument uses a stop character?  If so, use it.  It will make your life a LOT easier.  Most instruments use a carriage return to end a message.  If you have activated, playback then VISA would stop when this character of endpoint is located.

  If, however, your instrument does not have a character of endpoint, then you need to know EXACTLY how much character is send out instrument for the message.  If you guess too few bytes, then you will get all the data.  If you guess too many bytes, then you will have to wait for the timeout to occur.

  So if the message isn't 150 bytes, you'll be sitting there waiting for 10 seconds.  If the instrument has the stop character, simply activate the use of it on the VISA to configure the Serial Port and your question could disappear.

• My high interest reading Test failed

  Dell Support PC check says that my targeted reading test has no now what :)

  Hello

  read information from DELL on the DELL forums

  http://en.community.Dell.com/support-forums/disk-drives/f/3534/p/19358268/19798979.aspx

  http://en.community.Dell.com/Dell-groups/new-to-community/f/3511/p/19358086/19795086.aspx

  http://en.community.Dell.com/Dell-groups/new-to-community/f/3511/t/19380940.aspx

  _________________________________________________________________

  and here is the link to Dell's Support forums

  http://en.community.Dell.com/support-forums/default.aspx

• I can start the Narrator, but I can't read more than the title of my paper. Help.

  Win 7 32 bit, HP mini

  Narrator reads information file above the document excessively, but it will not go beyond the title when it connects the text.

  I have not found a way to get the Narrator to read a Microsoft Word document, but I can suggest a work around.  Copy the material you want to read from word and paste into a text document (left-click in any folder or from the main screen, choose new, click "Text Document".).

  Not only can you now that the Narrator read my clicking on the new text document, you can read it the selected parts by selecting.

• Read properties from other applications JAD

  Hello

  I need to know if there is a way to read all properties (including custom properties) from files JAD of other applications installed on the device. The goal is to identify all applications that have a specific property in the JAD file and display a list of these applications (and possibly of throw)...

  I am aware of this solution , but it seems only to read information from the request that.is JAD actually run the code.

  Welcome on the support forums.

  the article seems to cover that, just read all the groups instead of only your.

• Windows media player 12 does not reading music tags

  Windows media player 12 seems only to read some of my music labels.
  I use another program called media monkey to organize and play my music most of the time but the streaming and sharing features of WMP12 is great, the only problem is that more than half of my collection of mp3/wma in WMP with no artist/album/genre/etc
  If I right click on a track and "instead of opening the file" Explorer reads the tags of the tracks with no problem.

  In fact, I just checked and it's only the files MP3 which is can not read information from.

  Any ideas?

  I finally had the time to install the RC (build number is now 7229) and the problems disappeared. Just thought I would add this track to the top.
  WMP now works fine! Zoe

• Read file dynamic buffer

  Hello

  I did as you read information from a text file in my dynamic stamp.

  I try simple:

  Event.Value = this.importTextData ("/ c/temp/pdf.txt", 0)

  But this is not goog, have an idea?

  Finally, I used the question simple popup with this code:

  // Dialog Definition
  var oDlg = {
      strName: "", initialize: function(dialog) {
          dialog.load({"usnm":this.strName});
      },
      commit: function(dialog) {
          var data = dialog.store();
          this.strName = data[ "usnm"];
      },
      description: {
          name: "Test Dialog", elements: [ {
              type: "view", elements: [
                  { name: "Enter your name:", type: "static_text", },
                  { item_id: "usnm", type: "edit_text", char_width: 15 },
                  { type: "ok_cancel", },
              ]
          },]
      }
  };
  
  // Dialog Activation
  oDlg.strName = "Texte";
      if( "ok" == app.execDialog(oDlg)) {
      event.value = oDlg.strName;
  }
  

  Thanks for your help

• How to find the data document read/show rank or not by the user?

  iewI have IR report when the user logged on to the application and read the line (possibly, click on the view (edit) and read information in the form page) then a column called READING is YES, otherwise this line should be NO LU! How can I achieve this?

  Document	User	Read state?
  Task 1	A	Read
  Task 2	A	No reading

  Just because someone clicked on a link does not mean that the end-user it read.  Personally, I would ask the end-user if they read and which record.

  For the SQL... Use instead of DECODE CASE.

  ... or vice versa the DECODING logic

  decode ((select...), 0, 'Unread', 'Read') as REad_status

  MK

• How to read the application note on PC pad notes?

  I have a backup of notes (file "note pad.dat"), taken on a Palm T3 I want to read.

  I know how to read information in the notebook, address book,... files because the information is in the text (even if the file contains binary information).

  But in the notepad.dat file, there is only binary data (because the notes are images ).

  Anyone know the format of the images and how extracted from the notepad.dat file?

  Is there a tool to read the file to see the images?

  Thank you.

  Hello!

  Notepad.dat is a Table of Allocation of the data file that can be displayed only "regularity" of the Palm Desktop application for PC.  Install Palm Desktop version 4 of your Tungsten T3 CD and do the same user.  You will then need to this notepad.dat file in the directory of your user name, traditionally found in the registry:

  C:/Program Files / palmone / "username" / Notepad.

  Once your there, delete the existing notepad.dat there and then copy/paste your sustained here notepad.dat.  Then, open the Palm Desktop application to see if the notebook entries are here.

  To emphasize the point that current versions of Palm Desktop on our website have not the ability to view the notebook entries hence the need to use one on your Tungsten T3 CD to a PC.  Hope this works for you.

• Apple ID asked when restoring from a backup to iCloud

  Hi all

  First time poster, long drive date...

  I just updated from an iPhone (new) 6-6 s (reconditioned). During the process of "ICloud restore backup" on my device of 6s, he asked a password to *, in addition to my password for iTunes/App Store.

  At first I thought it was a remnant of the previous owner still present on the device, but after Googling * it seems that this account is not isolated to my question / unit. It doesn't seem to be a solution or explanation on the forums, but exactly the same problem. Have I possibly bought a reconditioned unit that was previously Jailbroken? Is anyway of deletion * completely from the device/account?

  I tried to erase content and settings a couple of times and yet one time, through the process of installing but * is always asked. Support or people who may have additional information would be appreciated.

  iPhone 64 GB 6s

  iOS 9.3.1

  < email published by host >

  Whenever people download an itunes - song, ringtone, or app, as the software has an identification label. Tag contains information of apple ID, to which it belongs.

  So when you back up old phone to icloud - icloud server sees this tag and to download over restoring the backup to icloud, due respect for copyright Apple it asks you to enter the password for this software. Usually, this is a song/s downloaded illegal in some country file sharing applications. You now have the choice to enter the password if the password is known to you or skip this step and the apple server will not download this software on your phone. If copyright protection agencies read these forums for people like you who would be an easy catch. Has completely no differences this phone, you restore, you can try to restore your old phone - same thing will happen.

• Issue of Script CUE, pronounced name

  Hello

  I have a script standard auto on a system of IDENTIFICATION of ver 2.1.1. If the person called is a subscriber of the unit and records a name spoken, I would like to play it back to the caller as a confirmation. I have this job by following the steps of the Extension of the user and read information from the user. If the Subscriber has not registered a pronounced name, the script errors out with a message of "system problems". I assumed that, given that the pronounced name is null. Is there a way to check a valid registered name before trying to use it as a guest?

  Thank you

  Dave Windorski

  If you are using a read the user information, you can set the attribute name spoken in a varialbe, say the spokenName (which is a kind of Document). You can tell a step if (spokenName is nothing), the step create generated prompt allows to set a guest spoken of the phone number. Then you can play the version spoken of the extension. If (spokenName == null) is false, then you can play the recorded name.

• Lightroom 5.5 'develop module is disabled. Please renew your membership to reactivate the develop module.

  My subscription is updated and running, but I get this message in the middle of the Lightroom Develop Module: 'develop module is disabled. Please renew your membership to reactivate the develop module"the same goes for the card. Library of books and work.

  Hello Phil

  If you still encounter this problem, please try the following troubleshooting steps.

  Solution 1: Sign out of Lightroom 5.5 and then connect back with your Adobe this identification code will activate the subscription again because you see that it is show as a trial.

  Solution 2:

  Set the permission to the folder SLStore & SLCache:

  NOTE: Do this twice, once each for the SLCache and SLStore files.

  Mac:

  • Use the Finder to navigate to/Library/Application Support / Adobe / SLStore or/Library/Application Support / Adobe / SLStore.
  • Control-click on the folder and choose read information.
  • Expand the section sharing & permissions.
  • Click on the padlock icon in the lower corner on the right. Enter your administrator user name and password when you are prompted, and then click OK.
  • Set permissions:

  System: read/write

  Admin: read/write

  Everyone: read/write

  • Click the gear icon and select apply to closed. Close the dialog box for information.

  Win 7 / 8 to win:

  SLStore: ProgramData\Adobe\SLStore
  SLCache:

  Win 32 bit: program files Files\Adobe\SLCache\

  Win 64 bit: Program Files (x 86) \Common Files\Adobe\SLCache\

  • In the file Explorer, right click on the SLCache or SLStore folder, and then select Properties.
  • Click the Security tab and set the permissions:

  Administrators: Full control

  Power users: all except extraordinary and a total control

  System: Full control

  Users: Read and extraordinary

  • Click on advanced and, if requested, accept the (UAC) user account control elevation prompt.
  • Click on the owner tab, select administrators and click on modify.
  • Select Replace owner of subcontainers and objects. Click on apply and then click OK.
  • Click the permissions tab, and then click on change permissions.
  • Select Replace all permissions of child object with permissions inheritable of this object. Click OK, click Yes.
  • Click OK, and then click OK in the Windows Security dialog box. Click OK to close the advanced security settings dialog box.

  Suggestion 2: Rename the SLCache folder and relaunch Lightroom 5.5

  We have followed this issue of Lightroom. Please let me know what solution has solved your problem.

  If these solutions do not work to solve the problem for you, let us know.

  Thank you

  Scott