identification problem

Similar Questions

• Network - LAN stucks on the identification problem

  I have a problem connecting to a LAN for Windows 7. He repeats to me that the LAN is identification. I have two operating systems of this computer. XP operating system works very well, so I guess that the network adapter is ok. Before Windows 7, used to work I deleted my users and created new users. The IP address is 169.*. *. * and the default gateway is blank. I have another computer hooks up to this router and it works fine. I tried to solve the last two days without success. Help, please.

  OK, if you're connected via cable (no WIFI), then you can try to run Windows 7 in "safe mode with network":

  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

  part:

  Safe mode with networking

  and test if it works or not.

  Can write you here if your network card is integrated in the motherboard or it is autonomous in the PCI bus card.

  Can you write here the manufacturer and model name of your NIC (stand-alone) or the manufacturer and the model name of your motherboard (integrated in the motherboard)?

  Some information about your network card, you can find in the 'Device Manager':

  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Device-Manager

  (under network adapters)

  LC

• Network authentication and identification problem of loop on Windows 7

  I am on Window 7 Home Premium, when I use my laptop and try to connect to the network at my workplace, it pop up the authentication of network call screen and ask me to put the username and password (I log in my laptop as administration) before typing the security code. Even when I manually add the profile of the network, I be able to connect to the network, but she just keep living to identify loop and I cannot go online. Someone at - it had the solution for these problems? Thank you very much

  Hello Daniel,.

  Thanks for posting your question on the Microsoft community.

  I would like to know some information about the problem so that we can help you better.

  Your computer is connected to a domain network?

  Thank you for details on the question and your efforts to resolve.

  This problem can occur for the following reasons:

  -Network standards do not match.
  -Missing updates.
  -Incorrect network connection settings.
  -Damaged or incompatible drivers.

  I would suggest trying the following methods and check if it helps.

  Method 1:
  Run the network troubleshooting and check.
  Reference:
  Using the troubleshooter from network in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  If this does not help, use method 2:

  Method 2:
  Please use the suggestions in this article and check the issue.
  Reference:
  Why can't connect me to a network?
  http://Windows.Microsoft.com/en-us/Windows/cant-connect-to-network#1TC=Windows-7

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• I put firefox 4 on my computer but had to withdraw because it did not allow the Norton toolbar that identifies safe and dangerous websites. This featurre will be available

  The norton toolbar feature that identifies problem sites
  (web safe) is a good tool and has saved us many problems.
  Experience, I think it's something I have to have.

  I loaded firefox 4 and although I like the program I took it
  the lack of this feature but I would use FF4.

  You will need to contact Norton on their plans for support to Firefox 4. It is quite common for businesses don't support a new version of a browser after that that it has been officially released, and it is not supported for the candidate/beta phase.

• hp officejet 6210 rattling when you try to connect to the laptop

  Trying to connect my hp office jet 6210 to laptop. The printer was initially linked to my computer HP destop, but who is dead and you need to connect the printer to my laptop > when I try to connect to my laptop on receive a clashing of offece jet. I have downloaded the print driver for my laptop, but still no luck. I don't have any original software of the printer as it previously belonged to my father. Any help would be appreciated.

  Hi alisoviejogirl,

  Welcome to the HP Forums, I hope you enjoy your experience!

  I understand that you can not install the printer on the laptop and get a clicking sound when you connect the printer to the laptop.

  I'll be happy to help you.

  I have provided a URL how to get to the Device Manager and check the conflicts.

  How to make in the Windows Device Manager? Then click on the link below the identification problems in the Windows Device Manager. You may need to right click to update the driver.

  Check the printer port is using by going to start, devices and printers, right click on the printer, go to the printer properties, select ports tab should be audited on USB.

  If you need more help, please provide the following information.

  What operating system do you use? How to find the Windows Edition and the Version on your computer.

  What happens when you install the printer software? (error, crashes)

  Show the printer entry in the Device Manager?

  Thanks for posting on the HP Forums.
  Have a wonderful day!

• 4620 installation printer MUST have access to the network?

  I want to connect a printer to 4620 all-in-One for a Dell 4400 DIM, which is running win XP SP3.  I did not need the fax or Scan functions or by mail and all I want to do is print the documents I compose on MS Office.  However, connect this printer on a USB and power supply does not work.  I can copy and I can choose the suggestions, but when I go to print, the dialog box indicates that the printer is not found.  I installed it using the disc that came with the printer, but I think there must be something I need to do this, it is not insisting on implementing online before it will print. Only some printers are able to operate without going online? I don't have online access.

  My computer is since 2002, then maybe the drivers that come with the printer are not compatible?

  I would be grateful for any advice.

  Essence

  Hi, gas,

  Welcome to the HP Forums, I hope you enjoy your experience!

  I understand that the printer prints not Win XP computer.

  I'll be happy to help you.

  The CD and the complete software and drivers from the Web site are the same driver.

  If you don't need all the additional software so I would download the basic driver.

  HP OfficeJet Basic driver.

  Follow these steps first, before reinstalling the drivers.

  Leave the connected USB cable.

  I have provided a URL how to get to the Device Manager and check the conflicts.

  How to make in the Windows Device Manager?

  Then click on the link below the identification problems in the Windows Device Manager.

  You can right click and try to update the driver to see if that will solve your problem or right click and uninstall the driver and restart.

  If the driver updated successfully, so try and print.

  If she has not updated the driver, then delete it, unplug the USB and run the installation program again.

  I hope this helps.

  Thanks for posting on the HP Forums.
  Have a wonderful day!

• Solaris x 86 32 bit crashes after installation

  Hello

  I install Solaris 10 g (32-Bit, ground-10-u6-ga1 - x 86) in a virtual machine on the ESX 3.5 server. The displays come very well but when the installion is complete and reboot happens, it breaks down and vm will be turned off.

  Can someone let me know how to solve this problem, I am new to solaris.

  Concerning

  David

  First of all, if you have a 64-bit processor, Solaris 10 will start an OS 64-bit by default, unless you provide explicit start-up settings to force a 32 bit OS to start.  It is likely that you dΘmarrez actually Solaris x 64 rather than Solaris x 86.

  You have a recent Intel CPU?  Solaris 10 x 64 GA will crash immediately while booting on modern Intel processors, due to a bad CPU identification problem in Solaris.  This produces both native mode and in a virtual machine.  Depending on how your CPU is recent, you must have at least the Solaris 10 x 64 3 update or update of Solaris 10 x 64 5 to solve this problem.

• A problem occurred during the digital extraction of the Machine Identification of rights management. XP and service pack 3

  When I try to down load MP3 audio books from the library I get error message "rights digitial management machine identification error.» I tried to download the upgrade of the security to windows media player component that had fixed this problem before, but the update button was grayed out.  I've applied all updates of XP and windows media player I can find and no solution.

  Try to reset the DRM system, by following the instructions at http://support.microsoft.com/kb/891664 . Tim Baets
  http://www.BM-productions.TK

• Problems with identification information

  Hello
  using credentials sseems to be easy, but I have problems in 11.2 under linux:
  This code executes without any problems:
  Start
  dbms_scheduler.create_job (job_name = > 'TESTJOB', job_type = > 'EXECUTABLE', job_action = > ' /tmp/mytouch.sh',enabled= > TRUE);
  end;
  /
  Externaljobs.ora run_user is tomtester and rungroup tomtester as well.
  so I have that my problems seem to be a protection problem.
  
  For the use of credentials, I have a tomtester of OS user with tomtester as password. I can connect with the user and can run /tmp/mytouch.sh with no problems.
  
  So I created a credential:
  
  Start
  dbms_scheduler.create_credential ('MYCREDENTIAL', 'tomtester', 'tomtester');
  end;
  /
  
  And change my job creation script to use these credentials:
  
  Start
  dbms_scheduler.create_job (job_name = > 'TESTJOB', job_type = > 'EXECUTABLE', job_action = > ' /tmp/mytouch.sh',enabled= > TRUE, credential_name = > 'MYCREDENTIAL');
  end;
  /
  This job fails with error # 27370
  "EXTERNAL_LOG_ID ="job_81737_5706 ",
  ORA-27369: Vom Typ EXECUTABLE been nicht mit output-job Code: argument list too long
  STANDARD_ERROR = "" launch external job failed: invalid username or password "" "
  
  Invalid user or password - why that? None of my OS users can run any job. The error message is always invalid user or password.
  Any ideas?
  Thanks in advance
  Joe

  Hey Joe,

  If you use a credential, externaljob.ora is not used. Instead, the Scheduler uses $ORACLE_HOME/bin/jssu connect to the operating system using the username and password specified in the credentials.

  Here are a few things to check

  s ' ensure that identification information has been created with the right user name and credentials
  -Make sure that you can su and sudo user
  -check the system or newspapers for connection errors
  -If you use linux or solaris make sure that pam is properly installed. In particular, make sure that the libpam.so file exists and is a link to a valid existing file

  Hope this helps,
  Ravi.

• Problem installing Works Suite 99 disc into my XP computer. I don't know the product identification number.

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  I try to install Works Suite 99 my drive in my computer XP (it was previously in an old computer running Windows 98.  Setup requires a product ID number that is not in my documents of purchase in 1999 of 20 digits.  My computer has XP on a programme of work 2004, but prefer to use the simplified version of 1999 instead.  Can anyone offer suggestions to overcome being blocked by the need for a product ID during the installation.

  Thank you. Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hi Ted008gar,

  You must contact Microsoft Customer Service and Support to locate and get the product key from the disc. Access the link below to learn more on how to identify, locate, and replace a product key.

  http://support.Microsoft.com/kb/811224

  I hope this helps. Post back with the required information.

  Thank you and best regards,

   

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Problem identification network

  Hello people, I hope someone knows an easy way to save time for me.

  My girlfriend has a new apartment, with a common to the other router unnaccessible then the landlord. It doesn't have wifi, but the signal is a little weak, so instead used wired, which is also available. However, the sentence connects with this cable. At first it worked fine, I plugged and had links in seconds. My macbook girlfriends connects a few more seconds.

  Mine but now all of a sudden... It shows the circle, saying his attempts to connect, but maintains blocked on unidentified network. When I keep the search stops after a minute, but no connection. When I then solve problems via windows built-in troubleshoot it resets the settings and it connects.

  As the macbook to connect I don't think that's the signal that does not. Also wifi (although slow speed) connects quickly on my laptop, but it's just for the low speed to use correctly.

  Hope someone knows what the problem maybe. I am running windows 7 Home premium, including service pack 1 and make regular updates.

  Barry

  Hi Barry,.

  Thanks for posting your query in Microsoft Community.

  I understand that the speed of the internet with Windows 7 is slower than Mac and I'll be happy to answer your query. In addition, I appreciate the efforts made in the patches that you tried. Let me ask you;

  • What is the brand and model of the computer?
  • What security software is installed on the computer?

  There could be several causes for this problem, including the obsolete network, network settings driver incorrect security, software, etc. I recommend you try this method first.

  Try to browse the internet in mode safe mode with networking. If it's a software conflict, you can solve the problem. If it does not always help, you can try the solutions I listed below in this thread.

  http://social.answers.Microsoft.com/forums/en-us/vistanetworking/thread/74f41557-4DD7-44F5-ba39-4b6009520aef
  
  Method 1. Reset TCP/IP:

  To reset the stack TCP/IP go to this article and either click on "Fix it for me" or follow the instructions to fix it yourself: http://support.microsoft.com/kb/299357

  Method 2. Disable the DHCP Broadcast Flag:

  Link: http://support.microsoft.com/default.aspx/kb/928233

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: http://support.microsoft.com/kb/322756 (how to back up and restore the registry in Windows)

  Windows 7 can not get an IP address from certain routers or some non-Microsoft DHCP servers

  To resolve this issue, disable the DHCP BROADCAST flag in Windows 7. To do this, follow these steps:

  1. Click Start, type regedit in the search box, and then click regedit in the list programs.
  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.
  2. Locate and then click the following registry subkey:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\Interfaces\ {GUID}
  3. in this registry path, click the (GUID) subkey that corresponds to the network adapter that is connected to the network.
  4. on the Edit menu, point to new, and then click DWORD (32-bit) value.
  5. in the new area #1, type DhcpConnEnableBcastFlagToggle and press ENTER.
  6 right-click DhcpConnEnableBcastFlagToggle, then click on modify.
  7. in the value data box, type 1 and then click OK.
  8. close the registry editor.

  By setting this registry key to 1, Windows 7 trying to get an IP address using the BROADCAST flag in DHCP Discover packets. If that fails, he will try to obtain an IP address without using the BROADCAST flag in DHCP Discover packets.
   
  Method 3. Disable IPv6:

  
  Try to uninstall IPv6 on all interfaces, the removal of virtual cards of IPv6 and reset the TCP/IP stack. To remove the IPv6, go to the properties for each network adapter, and deselect the check box next to the Protocol "Internet Protocol version 6 (TCP/IPv6), which will turn off, or select it and click on uninstall, which withdraw power off the computer.» Then go into Device Manager and remove any 4to6 adapters, adapters miniport WUN or tunnel adapters.

  NOTE: You should do this for each network connection.

  Also, please see: why is my Internet connection so slow?

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

• Windows 7 of fingerprints of connection problem, error ' year error occurred preventing the use of your information for fingerprint identification.

  Original title: wndows 7 fingerprint logon

  I like to use fingerprints for better security authentication when logging a session Windows or unlock. I can create a long, highly secure password and do not have to type it every time I have lock Windows. BUT...

  A week or two ago, the sensors of validity fingerprint reader on my HP Pavilion dv7 stopped working. I reinstalled the latest driver from HP support device, and everything worked fine for a day or two. Now the sensor still works, but Windows (7, home edition, SP1) gives me the message "year error occurred preventing the use of your fingerprint credentials." The only thing that has changed, I know, is the latest Windows updates.

  Can anyone help? Thank you!

  Hi Frank,.

  Thanks for the reply.

  I suggest you to refer to the article and check if it helps.

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?objectID=c03061709

  If the problem persists, I suggest you send the request in Support HP for assistance.

  http://h30434.www3.HP.com/

  Hope this information helps. If you need more assistance or information on this question, reply to this post. I'll be happy to help you.

• Problem identification user with appStoreReceiptHash() or serialNumberHash()

  Hello!

  I'm having a few difficulties in the identification of the user (me at the moment). I bought a perpetual license for my version of windows 7 to Lr. However, appStoreReceiptHash() returns zero and serialNumberHash().

  purchaseSource() returns 'CC', although I couldn't do the upgrade of trail version to run on windows, I downloaded a package "manual installation".

  I have something wrong or is this a bug in the windows version?

  Best regards

  Rasmus

  However, appStoreReceiptHash() returns zero and serialNumberHash().

  You have a typo in - meant - you say that serialNumberHash() returns an empty string?

  purchaseSource() returns 'CC', although I couldn't do the upgrade of trail version to run on windows, I downloaded a package "manual installation".

  Which page did you download?  Someone may correct me, but I think that all downloads, no matter how get you them, initially as the trial of LR CC until you either connect to CC or you enter a serial number.

  I think here it's that serialNumberHash() behaves as documented: d "From Lightroom 5.6, if the current Lightroom version has been installed from the Adobe Creative cloud, an empty string will be returned."  Given that all downloads initially as a free trial of LR CC version, there is no way to get the facilities serialized these downloads serial number hash.

  LrApplication provides a way to identify the facilities purchased from the Mac App store or installed from DVD, it does not seem to be any way to identify records of those who have installed from CC, that they subsequently signed in CC or serialized installation with a perpetual license serial number.  You can use macAddressHash(), but you need to handle the case where this facility is moving to a new computer.

• Problems with the module supplier of personalized identification information and overview of VMware View Client working together

  I have a Horizon of VMware View client that connects me HVD Windows 7. So when I give view client Vmware Horizon my credentials, it auto logs me. I also created a custom credential provider that works on Windows 7 PC. When I install the custom in the HVD credentials provider, it works if I am already connected to HVD and I simulate CTRL + ALT + DELETE. Can I use my credential provider to "unlock" in. However, if I disconnect of HVD and try to connect using VMware Horizon View client to connect to Windows 7 of HVD, it gets stuck on the screen of the tile. I see the VMware SSO user tile but nothing happens when I click it. Then, I use my provider of customized credentials to connect. I expect to bypass my ISP credentials on the first connection and self as before.

  Anyone have any ideas?

  Thanks for your help.

  OK, I did some more troubleshooting and discovered that it was a problem with auto connection set to TRUE on my side of custom credentials provider (I pbAutoLogonWithDefault to TRUE). Since I still like it TRUE, I had originally set it to FALSE and then change for REAL once my credential provider was used.

  Thank you!

• Signing of documents with certified identification some users get valid message and other problems? Any idea?

  Hello

  Will sign us documents with a certified identification and some users get a valid status then that of other issues. Same type of certifcate KPN Corporate market CSP assuré CA

  any idea?  Thank you

  Natasja

  It seems that some users have the certificate root in their 'approved identities' and others not. You have not specified which version of Acrobat you use but in Acrobat XI right - click signature, select "Show Signature Properties" and click on "Of the see the signatory certificate" button (in versions prior to Acrobat, it's the same thing, just the button is called a bit different, but with the same meaning). Next to view dialog box of the certificate on the left pane which shows the certification path. Select the top certificate of the page, then click on 'Confidence' tab on the right side. That do both in the facilities where you get the status valid and not. I bet where you get valid status the advanced certificate in the chain is approved and where he is unknown, it is not approved. You can directly add the confidence of this dialog box by clicking on the button "Add to approved identities".