IEEE 1394

Similar Questions

• Satellite Pro M30 in IEEE 1394 error

  Hello...
  I think I have a problem whit the IEEE 1394 driver

  I can't find the drive to any party, and the cd of drivers do not have this driver, I don't know how to solve, and the re-installation of the S.O. do not solve me the problem...

  Anu thing?

  Tank is a lot

  Hello

  you have runing OS OEM Toshiba (Toshiba Recovery CD) or you install a clean OS (XP full version)?

  It would also be good to know if the IEEE 1394 port has worked in the past or if necessary directly after purchasing the laptop?

  Have you checked the IEEE 1394 entry in the Device Manager? Try to reinstall the driver (I think this is a standard windows driver)!

  Sammy Bye

• IEEE 1394 and W2K on my Tecra A3

  Hello
  This device does not install correctly, it seems
  under IEEE 1394 ok, but the entry under network adapters
  does not exist and there is a PCI device listed in other devices who refuses to own as to what it is.

  Seems to work ok on XP.

  Any ideas?

  Hello

  have you downloaded the installation instructions order? To http://eu.computers.toshiba-europe.com - Driver download you find also for W2k.

  Also install all Quickfixes Toshiba site because the IEEE 1394 is a standard W2k driver that should work on every platform without problems!

  Good bye

• Qosmio G30: Cam Sony MV does not work with port IEEE 1394

  Qosmio G30-117 does not support my Sony DCR-IP5E (a micro video camera) port ieee 1394. I tried to use pinnaccle studio 9 and video ulead studio 10, but I could not see my cam because of these programs.

  There is no problem if I install a new win xp media center edition (retail pack) and CDTOOLS drivers. But I want to use my setup of the Qosmio factory, I don't want to buy a new win xp media center edition.

  How can I solve this problem?

  Thank you all.

  Hello Amon

  I tested it with Qosmio G20 and my Sony camcorder using the same port.
  I tested it with Windows movie maker, WinDVD Creator, Adobe Premiere and Ulead Media studio Pro 8.

  You may believe, but each application was able to see my cam and I copied movies on the HARD drive, edited and created DVDs. I don't really know what is happening in your case, but when you connect your switch cam on game mode, and the cam must be recognized as new hardware and listed in Device Manager.

  When it works well to start the applications and check again.

• How to connect a camera Digital Video through IEEE 1394 on my A50 port?

  Hello
  I tried to connect a video camera to my laptop SA50-109 through port IEEE 1394... but the laptop doesn't recognize any camera...
  Although the shows 'DV-in' camera when I plug the cable witch is DV (4-pin to 4-pin) cable...
  is there something I need to do before to make it work?
  any ideas... Please?

  Hi Isabelle,.

  I think that the normal login procedure is: -.

  1. connect the firewire cable to the camcorder.

  2. connect the other end to the laptop.

  3. turn on the camcorder (in play rather than camera mode).

  4. Windows will detect the camcorder and will make available as input source for your capture software.

  HTH

• P30: External hard drive is not detected when you use IEEE 1394 cable

  My P30 not / can not detect my newly acquired Western informed extreme Digitak Drive 320 when I connect via the firewire port. I use a 4-pin cable (which costs a fortune, by the way) who is supposed to be a way to connect this drive to a 6-pin pc.

  My ieee 1394 driver seems to be called 'VIA OHCI Compliant IEEE 1394 host controller".

  Can someone tell me what to do? I really need to connect the FireWire drive because I need the USBs for other devices.

  Thank you!

  Hi, Lars

  It is really strange. I use the external DVD drive (DL) using the same cable. I tested it with several units (old Satellite 1900, Tecra M1 and also new Qosmio G20) and everything works perfectly.

  Check the power supply to the external HARD drive.

• Question about satellite for MAC via IEEE 1394 connection

  Hello

  I have a laptop Equium I have connected to a box of OS x via Firewire to transfer files and use the functionality of the Macintosh to share Internet via IEEE 1394. Someone can tell me why, when I plug the Firewire cable, WinXP detects a new device that doesn't have a driver for the laptop?

  The Firewire device is already installed and seems to be working properly before plugging in the cable.
  Thank you!

  Hello

  Sorry, but I have never tried to connect a Mac with a Windows unit.
  As I know the Mac operation use another file as units of Windows mode.

  Usually, the best way is to use a LAN cable and not a firewire cable to connect the two computers. Firwwire does not support the IP or / and TCP protocols.
  In this case I don't know how the conection it works without all the protocols.
  However try to connect the devices via a LAN cable.

  Please also see this page:
  http://developer.Apple.com/

• SP A10: XP SP2 and Maxtor IEEE 1394: need MS patch?

  I have a Satellite Pro A10, hooked up to an external Maxtor 80 GB of disc over a Firewire/IEEE 1394 link.

  IEEE 1394 is attached to a card PCMCIA (from Belkin) that uses the NEC 1394 chipset.

  A hotfix is available from Microsoft (see http://support.microsoft.com/default.aspx?scid=kb;en-us;885464) but the MS Support saying this can only come with the support of Toshiba.

  Can you help me get the fix?

  Without it, I can rarely access the drive.

  It works fine on my Tecra M2 that accesses the same disk through its integrated 1394 interface. The problem only occurs with the NEC 1394 chipsets.

  Hello

  Well, have you contacted Belkin support?
  In my opinion, you should ask manufacturers of PCMCIA cards for the upgrade or this hotfix. In addition, you can check the drivers Toshiba download page for this fix. Microsoft patches are known as QFE. Maybe you will find one that suits. But unfortunately, if you are not able to find it, you will have to wait for the next service pack for Windows XP which will include this fix. :(

  Good bye

• IEEE 1394 USB on the macbook Air

  Hi, I tried to transfer my videos from my Canon ZR960 to my MacBook air with a Firewire (IEEE 1394) port for USB cable, but it doesn't work, my mac will not read the camera and won't be on side windows on the BootCamp partition. How can I fix, how can I transfer the videos (on mini cassette) to my MacBook Air?

  It is greatly appreciated.

  MacBook Air (2014)

  OS X 10.11.3

  Canon ZR960

  Mini DV

  IEEE 1394 (firewire) to a USB cable

  Hi luis098765,

  I see that you have problems when you try to import MiniDV video from your camera to your MacBook Air. I see that you try to use a USB FireWire-cable to achieve this. I would suggest that you use a FireWire adapter rather Thunderbolt as a USB connection does not allow you to import the tape media in your computer. More information can be found in the following articles:

  Final Cut Pro x: import of the cameras tape

  https://support.Apple.com/kb/PH12743

  If iMovie doesn't recognize or control your camera or camcorder - Apple Support

  https://support.Apple.com/en-us/HT204537

  Thank you for coming to Apple Support communities!

• Satellite M70 (PSM71E) Firewire / IEEE 1394 Device number

  I recently bought an Iomega eGo 250 GB Portable Hard Drive with USB 2.0 connections and Firewire 400.

  The Firewire port on the drive's type 6 pins. My Satellite M70 notebook computer has a Firewire 4 socket pins on the left side. I have an external power supply for the reader of the eGo. When I connect it to my laptop using a cable Firewire 4 pin 6 pin is not recognized. Nothing happens at all. I tried to disable the IEEE 1394 network adapter and reboot of Windows XP Home Edition with no luck. This drive connects and works very well using the USB cable, but I prefer using Firewire. The reader connects and works very well using the Firewire cable 6-pin 6-pin on my PC at home.

  Is there something I need to do to make the drive work using the Firewire port? I have no other Firewire devices to test the port with.

  Any help would be appreciated!

  Maybe the cable is defective? Is it the cable supplied with the HARD drive or did you buy it separately?

  You can buy more 6-pin to 4-pin adapter online. Google "firewire 6-pin to 4-pin adapter.

• You will need to plug Sony IEEE 1394 camcorder to an iMac. It would connect to the thunderbolt via an adapter port? I have a cable of firewire 800 and wanting to know how to get the video of my iMac. Thanks for any help you can give :)

  I borrowed a camcorder tape Sony that has an IEEE 1394 (ilink Sony) and eager to download video from my iMac.

  It would connect to the thunderbolt via an adapter port?

  I have a cable of firewire 800 and wanting to know how to get the video from my iMac via this cable.

  Appreciate any help you can give :)

  You want a Thunderbolt Apple FireWire adapter. Here is a link (to the US store):

  http://www.Apple.com/shop/product/MD464LL/A/Apple-Thunderbolt-to-FireWire-ADAPTE r? FNODE = 8 b & fs = f % 3Dadapter % 26fh %3 D 4595% 252B45b0

  Sorry, I don't know what software you need to play your video, once you get the cable work.

• Unable to connect via IEEE 1394 card reader in Satellite A100-988

  I tried to connect an i Link on my A100 port Compact Flash drive. I'm using a Firewire Extreme of Sandisk drive and the connection with a 4 pin cable 9-pin.

  Device Manager indicates that the TEXAS INSTRUMENT IEE 1394 CONTROLLER of BUS firewire is enabled and working properly. Unfortunately, my computer can not see the map. Any ideas?

  Hey Buddy,

  already enabled smart card service in the "services"? You must enable this service if it is not already done.

  You can reach services' by clicking on START-> Control Panel-> administration-> Services-> smart card tools

  Then go into this service, start him and to do as that kind of "autostart".
  I hope my tip helps you with your problem. :)

  Welcome them

• Texas Instruments OHCI Compliant IEEE 1394 Host Constroller - cannot be enabled

  Texas Instruments OHCI Compliant IEEE 1394 Host Constroller (for i-link) is disabled and I have / windows can't activate.

  This is the first time I tried to use it and did not notice the errors to do with it in the past.

  Is this option enabled by default on new machines. The only thing I can think of that could have affected via my use is by Norton. In the contrary case, the laptop is a new.

  Someone else knows what - all assistance. Thanks.M

  May I ask what laptop you have, what OS you are using, and what exactly you want to do?

  Thanks ;)

• Ieee 1394 host controller Texas Equium A60-692 does not start

  Hello!

  I have a Toshiba Equium A60-692 about 2 years old. On rare occasions the above will install and also the network/ethernet card etc with it when it starts. But 99% of the time it fails to start upward.

  Tech from Toshiba tell me it's the CMOS battery, but time slept OK for the last week so maybe it could be something else. Other strange things are can only recognize the drive HARD to start from what IDE Standard is chosen in the BIOS options (Enhanced IDE option and I think only used normal overall, ups causes boot errors). Also a green screen with weird graphics on occasion. Also the speed of the processor can be reduced, as shown in the properties of my computer.

  Any ideas from anyone as worried of wasting time to unsolder the battery if this isn't the problem. Could this be a fault of the motherboard that is irreparable? I am a relative novice if need help someone here. This made me!

  Hello

  I think you might be right. Eventually he s a small part on the motherboard that could malfunction.
  If I m not mistaken the controller IEEE 1394 Texas Instruments could be the Firewire port and it s part of the mobo

  Welcome them

• Cable IEEE 1394 to 800 FireWire MBP mid 2012

  Hello

  Currently, I discovered an old camcorder (Samsung VP-D371) that uses a DV IEEE 1394 cable entry. I have an old cable, but does not support the USB or firewire 800 appropriate.

  My question is: the Macbook Pro for mid-2012 capture the videos saved in the camcorder? --> If YES: should which cable I buy?

  -A DV to USB cable

  -A DV FireWire 800 cable

  -A DV cable for love at first sight...?

  Plus, do you know of any box or cable adapter for Mini DVI VHS transfer to the computer?

  Thank you

  Sincerelly,

  FireWire converts freely back and forth between its various forms, simply by using the correct conversion cable (which differs from the others only by the provided number of pins and the link shape.

  Most digital camcorders use the variety 4 pin, fireWire-400 without the supplied power cords.

  Older Macs use the Firewire-400 variety with power, which converts directly to your camera with a cable from 6 to 4

  New Macs using FireWire 800 varieties which has additional pins for drivers to push - pull on the data lines, so it has the connector 9 pins and can instantly transform 400 with a 9-6 adapter cable, or your camera with a cable adapter 9 to 4.

  Some separate adapters are also available, but these should only be used in an installation permeant, because (based on anecdotal evidence) "they grow legs and disappear.

• HP Envy 700-215xt: ieee 1394

  I need to install an IEEE 1394 interface card.  I understand that my computer has a PCI-Express expansion slots.   How can I be sure that a card IEEE will work in one of these machines slot?

  Hello

  Your computer has 3 PCIe connectors

  • PCI Express x 16 (Gen 3.0): 1