Iexplore.exe - Application error. Help!

Similar Questions

• IEHelper Acrobat: iexplore.exe - Application error

  Whenever I get close internet explore I get the message "Acrobat IEHelper: iexplore.exe - Application error the instruction at"0x01801ea8"referenced memory at"0x01801ea8".»

  The memory could not be 'read' "what should I do?

  Which version of Acrobat reader you have installed?
  Try to remove this application, clean the registry (with CCleaner), download and install the latest version of Acrobat reader!

  All that s

• Iexplore.exe - Application error (0x0eedfade) 217 runtime error

  I had error messages appear on my screen I have begin to close. The first said: Iexplore.exe - Application (0x0eedfade) 0x7c812a5b and the second error says: Runtime error 217 at 0473F48E
  What do mean?

  Yesterday my laptop stops in the middle of me to use it and then whenever I tried to restart again (even in safe mode) stop you it again before I had the chance. Today, I managed to restart the computer, but I got the same messages appear earlier today, as I was plugging the computer.

  Hello

  It seems that Microsoft internet explore caused an error.
  Somewhere I found a notice that this could happen after the IE 7 update and application Norton Antivir.
  Did you remove the Norton antivirus?

  I noticed that this software allows the slowest laptop. I used this several months ago. No I m using the Freeware tool called Antivir. It s great and free!

  After uninstalling Norton, please be sure that all the files have been deleted! The Norton Removal Tool can help

  Download Norton Removal Tool

• Iexplore.exe application 0x079B0068 error - I need to turn off DEP for certain programs and services, but I don't know which. I can't open some favorite sites. Micorsoft advice is not to turn off Dep for all programs and services.

  Iexplore.exe application error 0 x 0790068 - I am told that I have to turn off DEP for certain programs and services, which?  I am unable to open some favorite sites from one about Microsoft Update 1 month ago.
  Simplify the answer please, I'm so confused and frustrated and have spent hours to get to this point that I am destroyed so solve my problem!

  Hello

  Do run this as a top list of verification at the bottom.

  EricLaw IEInternals - a peek at Internet Explorer from inside. -Understanding DEP/NX
  http://blogs.msdn.com/ieinternals/archive/2009/10/10/understanding-data-execution-prevention-crashes-in-IE8.aspx

  The problem might actually be an add-on or another program to the origin of the problem and you should check that
  1st.

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER on it
  machines, including those that you have uninstalled (they leave leftovers behind which can cause strange problems).

  Start - all programs - Accessores - system tools - IE with no Addons - does this work better?

  IE - Tools - Internet Options - Advanced - tab click on restore, and then click Reset - apply / OK

  IE - Tools - Internet Options - Security - reset all Zones by default level - apply / OK

  not better?

  Close IE and try again IE or IE with no Addons

  IE - tools - manage Addons (for sure disable SSV2 if it is there, it is no longer necessary but Java always install
  "(and it causes problems - you never update Java to go back in and turn it off again)." Search for other possible problems.

  Windows Defender - tools - software explore - look for problems with programs that do not look right. Permit
  are usually OK and "unauthorized" are not always bad. If in doubt about a program to ask about it here.

  Could be that a BHO - BHOremover - free - standalone program, needs no installation, download and run - not all
  are bad, but some can cause your question. (Toolbars are BHO)
  http://securityxploded.com/bhoremover.php

  Startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  Also get Malwarebytes - free - use as scanner only. If you ever suspect malware, and that would be unusual with
  Prevx running except a low occasional (not much), updated cookie, and then run it as a scanner.

  I would add prevx so.

  Prevx - Home - small, fast, exceptional CLOUD free protection, working with other security programs. It comes
  a scan only, VERY EFFICIENT, if it finds something to come back here or use Google to see how to remove.
  http://www.prevx.com/

  PCmag - Prevx - Editor's choice
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  -------------------------------------------------------------------

  Do yourself a big favor and work through 1 above.

  How control DEP but I don't recommend turning it off and certainly not to let power off.

  How to enable DEP on or off for a program under Vista
  http://www.Vistax64.com/tutorials/65790-DEP-turn-off-programs.html

  How to enable or disable DEP in Vista
  http://www.Vistax64.com/tutorials/120778-DEP-enable-disable.html

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Svchost.exe - application error... help

  I receive the following error message at startup, when I connect.  If I complete the program my computer going to be inadmissible.

  Svchost.exe - application error.  The exception of integer division by zero. (0 x 0000094) occurred in the application at location 0x001a3fe2.

  Click OK to finish the program

  Click on Cancel to debug the program

  Nothing comes up on my anti-virus.  Any help would be appreciated.

  Hello Scott, I did some research on this and found this site, don't know if they fixed the problem is related to your but you can see if the process will help. I found this on PC * Web site:

  http://www.pchell.com/support/svchosterror.shtml

  I'll do some looking and see what I can find.

  It is permanently associated with a start-up program, I would like to go in safe mode after you start in Windows, go to start then run and type msconfig. Once in the config window go to the Startup tab and uncheck all the boxes that are not essential to the system. You do not uncheck anti-virus or your spyware / malware removal software. If the system starts fine then go back to msconfig and start checking one box at a time until you get the error again. The last program box checked is the culprit and should be removed and put back in place.

  Hope this helps, Jim

• Svchost.exe - Application error... Help please

  Svchost.exe - Application error the instruction at "0x7c923845" referenced memory at "0x00000000".

  Initially I thought that I had a virus because every time that I see this pop up on my computer it crashes and I have to restart manually. This often happens when I'm on the web. How can I fix?

  Svchost.exe is needed to start the required DLLs for Windows Services.

  Follow these steps and post, that things have "disabled" in the title of the status column:

  1. click on start

  2. click on run

  3. type services.msc

  Hope this helps

  Post back if necessary

  ____________________

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• AccelerometerSt.exe - Application error

  AccelerometerSt.exe - Application error

  "The application was unable to start correctly (0xc000007b). Click OK to close the application. »

  It happened after trying to install the windows 8.1 update and my computer went to a black screen. It is in this State for a while and I had to go so I stopped it. The next time that I turned it on, the update had already completed and I had windows 8.1. Everything works well except for the error message that appears whenever I turn on my laptop. I have no idea of what he does, but when he arrives, it annoys the hell out of me. If anyone can help I would really appreciate it.

  In the menu is uninstall programs, 3D driveguard program it listed?

  If so you can try to uninstall it, restart, and then reinstall the program.

  The problem is definitely with this driver because what is the accelerometer is to have the program 3D driveguard Park the heads of the hard drive in case of bumping or dropping the laptop low rise.

  Unfortunately, I only got the drivegard 3D or ProtectSmart driver install and work, so I don't know what you need to do to clear this error, since reinstalling the driver did not work.

• Re: AccelerometerSt.exe - Application error

  Hello

  I just bought the envy 15 and used for only one day, the next day I get this error:

  Re: AccelerometerSt.exe - Application error

  Your quick help is very much appreciated.

  Thank you

  Hello

  Try the following.

  Open windows control panel, open programs and features, make a right click the entry for HP 3D DriveGuard and select uninstall.

  When this has completed, restart the laptop.

  When windows has reloaded, download and install the version of HP 3D DriveGuard on the following link.

  http://ftp.HP.com/pub/SoftPaq/sp67001-67500/sp67280.exe

  Kind regards

  DP - K

• HP Envy 7 ": HP laptop"logonui.exe application error"+ auto repair restarts without end

  I really don't know exactly what is the name of my product, however, my problem is very specific:

  First I got an error message titled something in the sense of "logonui.exe application error" with a background black, I couldn't start my laptop up so I went to recovery and just all backed up successfully and went to reformat but it got stuck at 2% until he finally said the Recovery Manager has stopped working , I tried just about everything until finally my laptop just say 'auto repair start' goes to a blue screen, restarts and repeats again and again. I can't really do anything, it seems pretty well doomed. It seems like a virus, but really, I don't know what I can do, if the only solution is to send in for repair, can I try now?

  Kind regards

  Josh

  I get the "HP Recovery Manager failed. Error code = 0xEFFFFF08"pop up whenever I try to get back and I'm not using any USB devices.

  I ran a scan of the hard disk on UEFI and my results have been:

  Smart Check: spent

  DST short: failure

  Failure ID: QCQ7PH-7RK701-XD7WMF-60VL03

  Product ID: N1L03EA #ABV

  Hey!

  "The 'LogonUI' in Windows application manages your startup and shutdown graphical user interface (GUI) that displays the Windows on your screen logo and the status of your judgment." It also displays the login screen that you see when you start the PC. Corruption in this application could lead to problems start and stop, such as gel. »

  I found this paragraph from a titled link: LogonUI.Exe Application error after update 8.1 of Windows that can help you! There are a few in there troubleshooting steps that may help.

  Here is a Microsoft document for you to read as well. This is called: error: LogonUI.exe application error.

  I understand what you are saying about this marking as resolved. Tell you what, read the links I provided on the error in the application (which, from what I've read, in my opinion, does not sound like a virus), replace the hard drive and then if the issues are resolved for you, come back and mark this question as an acceptable Solution for others.

  I wish you the best!

• Restore7.exe application error

  So, when I try to boot my windows, an error box will appear, who says:

  "Restore7.exe - Application error. The instruction at 0 x 77892591 referenced memory at 0 x 00008084. The memory could not be read. »

  When you click OK, the computer starts and get stuck on this same page. I can't go to HP recovery by pressing F11. Recovery CD no longer works. Operating system is Windows Vista Home Premium

  can someone help me please. This problem can be solved by buying new hard drive?

  There is the info from my computer. :

  http://support.HP.com/us-en/document/c01409678

  How are recovery disks does not work? If you insert the first disc into the optical drive, press any key shortly after turing on your computer, you should start the recovery menu so that you can fully recover your computer.

  In addition, this could have something to do with Windows Product Activation? If you have added the internal devices, remove them and make sure you unplug all USB devices. Just the mouse, keyboard and display connected when you attmpt to a recovery.

• Computer OFFICE-R4RAE96: AccelerometerSt.exe - Application error

  These days, when I open my laptop, it's show as "the application could not start correctly (0xc000007b). Click ok to close the application. Also the top of the box of dialoge showing AccelerometerSt.exe - Application error

  Hello

  You upgrade your Windows 10 machine? A few other members, including me had the same problem a few weeks back and in my case, I simply reinstalled 3D Driveguard software.

  During installation, it actually says software on my machine is more recent BUT the problem disappeared. Download and run the following software:

  FTP://ftp.HP.com/pub/SoftPaq/sp71501-72000/sp71708.exe

  I hope this helps.

• HP Pavilion 15-n226tu: AccelerometerSt.exe - Application error

  AccelerometerSt.exe - Application error

  "The program can't start because mfc120u.dll is missing on your computer."

  Hello

  I did an upgrade to Windows Windows 10 8.1 that my computer was not shut down properly.  Now, whenever I start my laptop I get this error message.

  I have a HP Pavilion n226tu 15 Notebook PC model laptop and you ask to help me solve this problem.

  Best regards

  Gaurav Nath

  Hello:

  See if reinstall the software of HP 3D driveguard solves this problem.

  This package provides the HP 3D DriveGuard software (HP ProtectSmart Hard Drive Protection) for the laptop models running a supported operating system. HP 3D DriveGuard software protects the drive hard by parking the heads if cell phone accidentally falls, or is suddenly struck by another object.

  File name: sp71811.exe

• On startup, I get the following error: spoolsv.exe - Application error

  On startup, I get the following error:
  Spoolsv.exe - Application error
  The instruction at "0 x 10002837" referenced memory at "0x00000000".  The memory could not be "written".

  Then the print subsystem stops.  Windows update service keeps control and verification.  I let go 20 hours and it is never resolved.  I can't open some applications requiring printers.  Help please.

  Bill

  Hello DragonBill,

  Thank you for visiting the website of Microsoft Windows Vista Community.

  Regarding your question, the most common cause of the error is an abundance of. SHD and. Files in the directory of spool SPL.  These files are created by the spooler to save data delayed a print job.  The. SPL file contains the drawing commands and the. SHD file contains information of working parameters the print job.

  To try to correct the application spoolsv.exe error, you must remove these files from the system.  To do this, perform the following steps on your Windows Vista computer:

  1. open the Control Panel, select Classic view, select Administrative Tools and then select Services .

  2. in the Services management console, find the Spooler service, right-click on it and select stop.

  3. then open the folder C:\Windows\System32\Spool\Printers .  (Here, we assume that your Windows is installed in the default C:\Windows folder)

  4. delete all the . SHD and SPL files in this folder.

  5. then open the TMP folder and delete all the old, unused files in this folder.

  6. Finally, restart the spooler from the Services management console service.

  Important note: If you are unable to delete the files in Normal Mode, then you may have to restart your computer in Mode safe to delete files.  To start your PC in safe mode, press F8 when the system restarts, and then select the Mode option safe mode from the Windows Advanced Options Menu.

  If deleting the files do not straighten out the problem, you must perform a system restore and restore your system to the times before when the error started appearing on your computer.  A.m. run the restoration of the system, open Start, all programs, Accessories, System Tools , and then select the System restore option.  On the Welcome to system restore screen, select the restore my computer to a time option earlier and select Next.  In the Select Restore Point screen, select the date that represents the restore point to which you want to restore your computer back, and then select Next.  Finally, check and then click Next again to confirm your restore point and restore of the system.  Restart your computer when you are prompted, and then press OK to close the end of System Restore screen.

  It is important that you know that application errors can also occur because of virus or spyware infections.  In fact, the Spoolsv.exe process is also a known backdoor vulnerability which can be planted on your computer for malicious purposes by an attacker.  Therefore, if you see an unknown process running on your system, you must take appropriate measures to remove them.

  Let us know if these steps solve your problem.  I hope the information is useful.

  Kind regards

  Anthony
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• When I start my PC, and before you start I receive this message from InfoCenter.exe - Application error - the application is not initialate properly (0xc0000135).

  Original title: initialize 0xc0000135

  When I start my PC, and before you start I receive this message from InfoCenter.exe - Application error - the application is not initialate properly (0xc0000135). I just click OK and continue. Any problem? Is this necessary application?

  Walter Rodriguez

  E-mail address is removed from the privacy *.

  10/07/12

  14:57

  Hello

  1. do you receive this after you see Start button or entry?

  2 have you made any changes to the computer before the show?

   

  Method 1: Boot errors are fixed by the clean boot.

  Perform the clean boot and see if that helps.

  A clean boot to check if startup item or services to third-party application is causing this issue.

  Reference: How to solve a problem by performing a clean boot in Windows Vista or Windows 7:

  http://support.Microsoft.com/kb/929135

  Note: when you're done to diagnose, follow step 7 in the article to start on normal startup.

   

  Method 2: Some malware parody itself as InfoCenter.exe, especially when it is located in the folder c:\windows or c:\windows\system32.

  I suggest you make a system full scan just to be sure.

  Here is a link that will give you information on how to perform a full scan of the system:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  , Note 1: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Note 2: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

• When you use Windows Search error SearchFilterHost.exe - Application error

  When you are using Windows XP (SP3) running Windows Search (4.0), I get the error message:

  SearchFilterHost.exe - Application error

  The instruction at "0x0af609c" referenced memory at "0 x 00000014. The memory could not be "read".

  Click OK to terminate the program

  I do nothing especially when this happens and the disabling or uninstalling this feature is not an option that I and some of the programs that I use it. She repeats every few minutes, but I'm pretty sure it's because the application restarts whenever you "Finish". I also tried to reinstall it but to no avail. Thanks in advance for any help.

  These errors appear when the index database is corrupted, for example during the crash, etc. The solution is, except disabling or removing the search service, reconstruction of the index. Just reinstall will not solve the problem, because that does not remove the corrupted index.

  On XP Pro:

  (1) start 'services.msc' and find Windows Search stop.

  My personal advice: check user accounts all records and make sure that the "Application Data" and "Local Settings" directories have their attribute 'Index summary' unchecked, including all files and subfolders. You can avoid many possible future performance issues.

  2) go to c:\Documents and Settings\All Users\Application Data\Microsoft and delete the entire directory "Search" (or just rename / move elsewhere).

  (3) close the session log. Index will rebuild, it may take some time, depending on the amount of documents, music, etc. you have. So be patient with harddisk increased temporary activity. Normally it works with a low priority.

  On Vista/7 Search index is located in \ProgramData\Microsoft, otherwise,'s done it the same way. Unfortunately, I do not know how to avoid the real alteration. XP seems more inclined to him.