If a PC with a DHCP server is connected via VPN, with her serve IP addresses on the tunnel?

Similar Questions

• My husband doesn't like the itunes account is under my name.  I have a way that he can have his own name and sign on with her and still exist on the family account?

  My husband doesn't like the itunes account is under my name.  I have a way that he can have his own name and sign on with her and still exist on the family account?  Also, have we HAVE two-step verification?   It's a real pain.

  Yes it can have its own ID and share your content via the family sharing, he needs to sign out of your ID and to create his own, then one of you needs to invite another family sharing.

  You don't need to use 2 verification step, if you want you can disable to my Apple ID

• Problem with the DHCP server IP address

  Hello

  a new installation of LAN, two VSS pair core 6509, 15 closets, with piles of 3750. Floor 15 only, host devices can ping the DHCP server, but cannot acquire IP addresses. not this problem on other floors?

  PortFast a dother settings are intact.

  your thoughts with be appreciated.

  Massoud

  Are the trunks will switches closets for the vlan, the DHCP server is in?

  Sent by Cisco Support technique iPhone App

• New DHCP server not to issue the IPS (2012 R2)

  Having a new DHCP server is going. Authorized and not coming error. Turn off the old DHCP server and try to renew the lease of the IP, and nothing happens. What is the problem?

  I forgot to change the IP addresses of switches support. :( Everything works. :)

• DHCP server does not start - the storage control block address is invalid.

  I use a trial version of the Pro Workstation 12.1.1 on Windows 10. I seem to have a strange problem where the DHCP service does not start.

  I tried to go into the virtual network editor and then restore the default settings, which had no effect.

  The event viewer displays the following text:

  CreateFile Version ioctl(): VMnet8 (327680 393216): the operation completed successfully.

  / The storage control block address is invalid

  Checked the service and it runs under a local, verified system account permissions on the config dhcp / rental file in c:\programdata\vmware\ and both have system configured to full control. I tried to run the vmnetdhcp.exe in a command prompt to we hope to get additional information, but cannot be executed directly. I can't figure out how to get out of documented logging dhcp server in order to track down what could be the culprit.

  I tried to uninstall workstation, restart, reinstall, restart both unsuccessfully. I had version 9 workstation that was installed previously, in which the trial upgrade.

  Any suggestion would be appreciated.

  Figured it out.

  It appears during the workstation installation 9, he placed vmnetdhcp and vmnetnat in c:\windows\syswow64 folder. Pro 12 workstation puts these files in the default directory (C:\Program Files (x 86) \VMware\VMware workstation). The service was always pointing to the old location even SysWow64 after an uninstall and reinstall.

  I replaced the files SysWow64 folder workstation and services started right up.

  Checked the work by selecting NAT and gets an IP address from the host machine.

• DHCP server virtualized inaccessible by the physical host computers

  Hello.

  I set up a DHCP under VMware Server 2. It is accessible by the virtual machines on the same host, but not by physical machines on the network. They can ping its IP address, but do receive any DHCP offer at the start of it. Are there additional configurations that I have to look?  The VMware networking is configured in bridged mode.

  Thank you.

  Alinpastrama,

  What is the host operating system?

  Do you have any software firewall on the host?

  If you have found this or other useful information, please consider awarding points to 'Correct' or 'useful '.

• How can I set up separate e-mail folders in Windows Mail to two companies each with its own email address and the password?

  We use Verizon as our ISP.  I was getting our email to two different companies by connecting to Verizon in with another user name and password for each company.  However, we have received messages in our email that we were almost our quota and customer emails we would not come through and have been having rebounded.  I spoke with Verizon and learned to use a 3rd party to channel messages and thus free up space from the server.  They helped me to set up the email to go in Windows Mail, but now all the email for both companies will in the same e-mail account.  How can we separate the email for both companies so that each company can log on to Windows Mail with their own separate IDs and passwords?

  See this:
  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account
   

• One of the virtual machine gets the APIPA address after you have configured with a static IP address, where the other VMS works very well with same vlan with static IP

  We have deployed 3 VMs with the same vlan where one virtual machine gets APIPA address, even after the configuration of the IP address manually.

  We do not have servers DHCP and other VMs 2 find with the same vlan

  No IP address is not used by another system and another IP address works

  Meanwhile, I just googled and got a God save the link that helped me in the question of fixing

  http://lyngtinh.blogspot.in/2011/12/how-to-disable-Autoconfiguration-IPv4.html

• Problems with different e-mail addresses and the different Apple ID

  Hi, I have some problems with the different Apple ID and e-mail addresses connected to them, and I hope someone can help me in what to do.

  First a primer on my Apple ID

  ***@me.com - it's my account General iCloud (backup, iMessage, Facetime etc.).

  ***@losmail.no - my iTunes/App account (purchase and download music, app, etc..)

  ***@me.com: I have no problem connecting to this account (appleid.apple.com, iCloud.com etc etc..)

  ***@losmail.no: I have no problem connecting to this account in iTunes/App Store. However, I can not connect on appleid.apple.com with this account because he asked me to check the email address. However, this e-mail address use a messaging service that doesn't work anymore, so I can't check it out. Because it is a private messaging service, I want to change the Apple ID on my account @gmail.com.

  I believe, however, that the account @gmail.com has been connected to the account @losmail.no because I received my shopping etc. of my account @losmail.no sent to ***@gmail.com. These recipes also "Apple ID: * @gmail.com. When I connect to the account, however, use ***@losmail.no. However, an I said, I want to log on by using ***@gmail.com.

  What is strange is that in iTunes / App Store, I can connect with ***@gmail.com. However, this is not the same account as ***@losmail.noand previous purchases / comments etc. are not available. It's strange because said revenues (Ref. above).

  An other ting that indicates that the Apple ID where I use ***@losmail.no once was connected to ***@gmail.com, is what happens when I try to log in to ***@gmail.com to appleid.apple.com. Then, I get a message saying that the e-mail address must be verified. I can write the code sent to the ***@gmaiI.com, but it is said then that this e-mail address is already is used by another Apple ID, so it cannot be verified.

  So I guess my question is, basically, how I can change the ID of the ***@losmail.no to ***@gmail.com Apple when I can't access the account losmail, but the appleid.apple.com tells me that I need to check this email address.

  Best regards

  Philippe

  Hi phillla,

  Thanks for all the details with your accounts.

  Can be difficult to have more than one Apple with several e-mails all mixed together.  If an email is used with another Apple ID, for example, that e-mail can be used to create a new Apple ID or rename an old.

  The analysis of what you seem to have however...

  Your purchases are with your *@losmail.no Apple ID, but the emails for this go to your *@gmail.com email address.

  *@gmail.com is the primary e-mail address for your Apple ID *@losmail.no.

  You can connect to iTunes or manage your page ID with *@gmail.com Apple says it's an Apple ID on its own.  As an email address can only be verified for an Apple ID, which means that he must check with your *@losmail.no Apple ID and cannot be verified with *@gmail.com.

  You say you can not connect on appleid.apple.com with *@losmail.no you will need to check the email address.  You have a relief attached to this ID e-mail? This is the email that would be used to recover.   You receive your check or reset email - Apple Support

  Bottom line, you want to change your primary Apple ID but outdated to *@losmail.no to *@gmail.com, you must first rename *@gmail.com to something else and delete this email of all codes from Apple as well.  Then follow the link above to get access to *@losmail.no and control so that you can rename it.

  Best regards.

• I'm having a problem with Outlook Express 6, where when I connect, it downloads all messages for all addresses in the Outlook profiles. Help!

  Need help

  You use OE and Outlook to mail?
   
  Tools | Accounts | Mail | Properties | Advanced - Check: leave a copy of messages on the server.
   
  If you do not use the two, make sure that the setting is the same in Outlook, but in a program only, make sure to delete messages after X days to satisfy your allocated space you get from your server, but leave enough time to retrieve messages in the two programs.

• Outgoing e-mail constantly is rejected Server Error # 0x800CCC779, 550 response from Server (invalid address) but the address is valid!

  I sent 4 emails from people I know and 3 had sent, but not the fourth.  I had an attachment (YouTube video).  Read the error message:

  Has been rejected by e-mail * address email is removed from the privacy *, subject: ' Chirichaua travel, account: pop.west.cox.net; Server: smtp.west.cox.net, SMTP Protocol; 550 server response invalid 5.5.0, address, Port 25, secure (SSL) Server Error 0x800CCC79 #.

  2 / 3 completed tasks

  I'm not a technical type of person (at all) and hope that your answer tells me exactly how to solve this problem.  Thank you!!!

  Eileen BK

  You are the very welcome. Happy, I was able to help.
   
   

• Help with rotation symbol and address at the top left

  I want to be able to turn a symbol on the center of my choice (or even the center of the image/symbol), but retain the upper left corner as 0,0. Is this possible? It seems that I may have only one or the other.

  My project is an image (inside a MovieClip symbol) which moves and rotates according to the direction of travel. Only problem, it's funny. And then when I Center/adjust the rotation of the image inside the symbol, its origin is no longer in the same place, and I have to give additional numbers to compensate for. I guess the reticle is (0,0) as well as the central point or rotation. I'm fine with this being (0,0), but how can I move the rotation/pivot also point? I tried to use the free transform tool to move the white dot in the Center, but little success.

  Any tips? Thank you!

  AFAIK, you must choose one or the other.  If centered rotation is important, then Center your 0,0 and use the compensation values if you need to locate the top-left corner moving ever.

  I don't know if the loading of the moiveclip in an empty movieclip can offer a solution that you want to or not.  You can rotate the movieclip centered inside and use the movieclip containing the x / values there.  It might be interesting to play with and see what happens.

• Management network with a different IP address than the host?

  I want to isolate network traffic from my VM traffic management.  My host is on the same VLAN as the majority of my virtual machines.  Can I change the core IP network management to be different from that of my host?  Or am I stuck change IP / VLAN my hosts to something else...

  Yes, you will lose the connection to vcenter. Ideally, remove the host to vCenter, change IP and it readd back (vcenter will need access to this vlan 200 also).

• WLC 5508 internal DHCP server issues

  Hello

  I'm hoping to get your comments around the issues of dhcp, I faced with two centrally switched Wireless LAN. I have attempted to explain the installation and the problems below and would be grateful if anyone can suggest a solution for the problems I am facing:

  The configuration is the following:

  -J' have a WLC 5508, which has been configured with 4 SSID, of which 2 are the Central authentication and commissioning.
  -J' have a LWAP connected to the WLC in HREAP mode.
  -WLC is configured as a DHCP server for clients that connect to the SSID "Guest." For the rest, I'm on external dhcp server.
  -Only one scope of comments Interface is configured on the WLC.

  Problems:

  1. as far as I know, to WLC serve internal dhcp server, it is mandatory to have the proxy enabled, but the Clients connecting to 'Internet' SSID are

  Unable to get an external dhcp server ip address, if the proxy dhcp is enabled on the WLC. If I disable the proxy, everything works fine.

  2 DHCP does not release the ip addresses assigned to clients, even after that that they are connected.

  3. If a machine that has previously been connected to "Guest" SSID connects to the 'Internet' SSID, he asks the same ip address, he was charged by the WLC assigned under "Guest", it gets the tag with the Vlan configured on the management interface.

  The controller output *.

  (Cisco Controller) > show sysinfo

  Name of the manufacturer... Cisco Systems Inc..
  Product name... Cisco controller
  Version of the product... 7.0.116.0
  Bootloader Version... 1.0.1
  Retrieving Image Version field... 6.0.182.0
  Firmware version... Console USB 1.3, 1.6 Env FPGA, 1.27
  Build Type....................................... DATA + WPS, LDPE

  (Cisco Controller) > show interface summary

  Name interface Vlan Id IP port address Type Ap Mgr. Gu

  EST
  -------------------------------- ---- -------- --------------- ------- ------ --
  1 301 10.255.255.30 dynamic guest no no
  Management 1 100 172.17.1.30 static yes no

  service-port s/o s/o 192.168.0.1 static no no
  n/a n/a 10.0.0.1 no nonstatic virtual

  (Cisco Controller) > show wlan summary

  Number of wireless LANs... 4

  Profile WIFI WLAN ID name / name of the SSID status Interface
  -------  -------------------------------------  --------  --------------------
  1 active LAN management
  2 active Internet management
  3 active active management management
  4 comments comments enabled

  (Cisco Controller) > show dhcp detailed comments

  Scope: comments

  Enabled.......................................... Yes
  Lease Time....................................... 86400 (1 day)
  Pool Start....................................... 10.255.255.31
  Pool End......................................... 10.255.255.254
  Network.......................................... 10.255.255.0
  Netmask.......................................... 255.255.255.0
  Default routers... 10.255.255.1 0.0.0.0 0.0.0.0
  DNS Domain.......................................
  DNS.............................................. 8.8.8.8 8.8.4.4 0.0.0.0
  NetBIOS name servers... 0.0.0.0 0.0.0.0 0.0.0.0

  (Cisco Controller) > show detailed interface management

  ... Management interface
  MAC address... e8:b7:48:9 b: 84:20
  IP Address....................................... 172.17.1.30
  IP Netmask....................................... 255.255.255.0
  IP Gateway....................................... 172.17.1.1
  State IP NAT outside... People with disabilities
  External IP NAT... 0.0.0.0
  VLAN............................................. 100
  Quarantine-vlan... 0
  Active physical Port... 1
  The primary physical Port... 1
  Port of physical backup... Not configured
  Primary DHCP server... 172.30.50.1
  Secondary DHCP server... Not configured
  Option DHCP 82... People with disabilities
  ACL.............................................. Not configured
  AP Manager....................................... Yes
  Comments interface... NO.
  L2 multicast... Activated

  (Cisco Controller) > show detailed comments from interface

  Interface name... Comments
  MAC address... e8:b7:48:9 b: 84:24
  IP Address....................................... 10.255.255.30
  IP Netmask....................................... 255.255.255.0
  IP Gateway....................................... 10.255.255.1
  State IP NAT outside... People with disabilities
  External IP NAT... 0.0.0.0
  VLAN............................................. 301
  Quarantine-vlan... 0
  Active physical Port... 1
  The primary physical Port... 1
  Port of physical backup... Not configured
  Primary DHCP server... Not configured
  Secondary DHCP server... Not configured
  Option DHCP 82... People with disabilities
  ACL.............................................. Not configured
  AP Manager....................................... NO.
  Comments interface... NO.
  L2 multicast... Activated

  (Cisco Controller) > show dhcp leases

  IP MAC remaining rental period
  00:21: 6a: 9 c: 03:04 10.255.255.46 23 hours, 52 minutes, 42 seconds< lease="" remains="" even="" when="" the="" client="" is="">

  Example of customer connected to the Vlan right with an ip address from the incorrect interface. *************

  (Cisco Controller) > show customer detail 00:21: 6a: 9 c: 03:04
  MAC address of the client... 00:21: 6a: 9 c: 03:04
  User name of the client... N/A
  AP MAC address... a0:cf:5 b: 00:49:c0
  AP Name.......................................... mel
  Status of the client... Associates
  Customer of the NAC OOB State... Access
  Wireless LAN Id... 2<   'internet'="">
  BSSID... a0:cf:5 b: 00:49: this
  Connected to... dry 319
  Channel.......................................... 36
  IP Address....................................... 10.255.255.46< ip="" address="" assigned="" from="" the="" 'guest'="" interface="" or="" dhcp="" scope="" on="" the="">
  Association ID... 1
  Authentication algorithm... Open System
  Reason code... 1
  Status code... 0
  Session timeout... 1800
  Client CCX version... 4
  Version of E2E customer... 1
  QoS Level........................................ Silver
  Beacon priority P 802,1... disabled
  Support WMM... Activated
  Power Save....................................... OFF
  State of mobility... Local
  County of movement mobility... 0
  Complete security policy... Yes
  State Policy Manager... RUN
  Policy Manager rule created... Yes
  ACL name... no
  Status to apply ACL... Not available
  Type of strategy... N/A
  Encryption Cipher... None
  Protection management framework... NO.
  EAP Type......................................... Unknown
  Data HARVEST-H switching... Central
  H - HARVEST authentication... Central
  Management of the interface...
  VLAN............................................. 100< right="">
  Quarantine VLAN... 0
  Access VIRTUAL LAN... 100

  Well it's good news. At least you have to operate.

  Thank you

  Scott Fella

  Sent from my iPhone

• I put my cRIO 'DHCP' to 'local connection' and lost contact with her.

  I put my cRIO 'DHCP' to 'local connection' and lost contact with her.

  I changed the location setting labelled '2' to post a link-local only, so I think I hit save to '3 '.  So, I have had no contact with my cRIO network.

  I tried;

  Hit the reset button

  A MAX of opening closure

  Go to safe mode

  Lift the switch to reset IP

  Power cycling the cRIO

  Directly from the host to my target of cat 5 cable running

  None of it worked, and I have no contact with my cRIO.

  

  This is what MAX looks like now.  How can I fix?

  

  It turns out that I had more of a problem.  Corrupt drivers, 255 in many in my subnet mask, overly complex LAN, use server control... you get the idea.  So I just deleted all software, disassembled everything and more from scratch.  Now back to the top and work.

  Thanks for the tips everyone, all the pieces and peace where it is useful to help me see the bigger picture.