Security Center does not recognize the Windows Security Essentials
Windows Security Essentials does not seem to register with Security Center. Security Center reports that no Virus protection is enabled.
1. I installed Windows XP 32 - bit WGA, activated the product and updated to SP3.
2 security Center starts giving Windows security alerts for Virus protection, because none has been installed.
3. I installed McAffee VirusScan.
4 security Center stopped giving Windows security alerts for Virus protection.
5. I uninstalled McAffee VirusScan.
6 security Center has resumed giving Windows security alerts for protection against the viruses as before.
7. I installed Windows Windows Security Essentials and rebooted.
8. I tried to uninstall and reinstall Windows Security Essentials with no joy.
Windows Security Essentials installation did not prevent Windows security alerts. No Windows Security Essentials registry entry will appear in HKEY_LOCAL_MACHINE/Software/Microsoft/Security Center and monitoring. If Microsoft consider essential security to be an antivirus product, then how to Windows Security Essentials register with Security Center?
I understand that this is an information and alert issue only. I understand that Windows Security Essentials works actually ok. I am particularly concerned by the reports. It conditions my deployment of Windows Home Server. Deactivation of surveillance or the alert is not a solution, just a poor quality work around.
In a previous thread, the author of this question even abandoned and has not requested additional assistance. An explanation was given (relevant for Windows 7), but no solution has been offered. Windows XP has not been addressed. http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/the-Security-Center-has-not-recorded-an-anti-virus/15ae2383-7ced-4850-A863-f7eb8cc90ee5
I had the same problem for a while now (I'm on xp) and have searched the Internet for a solution but found nothing at the moment.
Tags: Windows
Similar Questions
-
Windows Security Center does not recognize the webroot security essentials
I have webroot essentials of security installed on my windows 7. The Security Center is not recognize the program. This program has antivirus, antispyware and firewall. The webroot program works normally. Security Center sees no antivirus, windows firewall is enabled (but in fact webroots Firewall works), says and shows that the antispyware windows Defender (previously, he showed have spy sweeper from webroot and windows defender). My question is how can I get the windows Security Center recognize the webroot program? THX
Hi, thank you for responding. I could solve my problem simply by uninstalling and reinstalling the webroot program. After you reinstall and reboot, windows security center see and recognize the antivirus, firewall and antispyware components
-
HP Solution Center does not recognize the network printer
Network has a hp 309 a printer, can print from the computer, the problem is:
HP Solution Center not load-says incomplete installation. If I plug in the USB cable and let it continue, it sets up a second printer that only works on the USB cable and it still does not recognize the network printer.
Question how can I get the Hp solution program to reward the network printer. If I reload the CD, then reinstall the will other people on the network of the problems?
Resettlement on your machine won't affect only you, no other machines on the network.
-
Bootcamp does not recognize the Windows 7 installation DVD
Hi guys,.
I've never had a problem installing Windows 7 via bootcamp on my Mac, but it seems an impossible feat, right now! :))
I have a Windows 7 bootable *.iso, but since I'm on 2010 Macbook Pro, I have to burn it to a DVD and install from there (I can't find the disk of valuable facilities).
It is, every time that I burn it, it does not get recognized as a bootable DVD with bootcamp and not appear as a boot disk in the selection screen, you need to keep alt right after the startup chime.
I tried at different speeds (2 x, 4 x, 8 x). I tried to convert the image using disk utility and selection of DVD/CD master and burning at different speeds.
I'm in two DVD and I don't know what to do :) I've got El Capitan installed (so less disk utility options).
Please help! :))
Martin
This latest DVD Virgin and it worked! BUT dig this error I had!
Boot Camp only supports 64-bit Windows 8 installation. Please use a Flash DRIVE or a DVD that contains 64-bit Windows 8.
WHAT? !!! Even though it says to install Windows 7 or a later version?
I want to punch someone who works for Apple now!
-
XP Media Center does not recognize the atsc tuner
Comes with a mistake to try to at least one device with ntsc tuner. I have an atsc/qam tuner.
Operating system System model Windows XP Media Center Edition Service Pack 3 (build 2600)
Install language: English (United States)
Local system: English (United States)Dell Dimension E521 Inc.
System Service tag: 1K6C6C1 (support for this PC)
Chassis serial number: 1K6C6C1
Case type: DesktopProcessor Main circuit 2.00 GHz Dual Core AMD Athlon 64 X 2
hides the central memory of 128 kilobytes
1024 kilobyte secondary memory cache
64-bit ready
Multi-core (2 total)
Not hyper-threadBoard: Dell Inc. 0CT A03 103
Serial number:... CN708216AQF10C.
The bus clock: 1000 MHz
BIOS: Dell Inc. 1.1.4 12/09/2006Readers Memory modules 349.53 GB drive hard usable capacity
292,35 gigabytes of free disk spaceHL-DT-ST DVD-ROM GDRH10N SCSI CdRom Device [scanner]
TSSTcorp DVD +-RW TS - H553A SCSI CdRom Device [scanner]WDC WD5000AAKS-00UU3A0 [hard drive] (500,11 GB) - drive 0, s/n WD-WCAYU6672846, rev 01.03B01, SMART location: healthy
3072 MB usable memory installed Slot machine 'DIMM_4' has 1024 MB (serial number E82397F1)
Slot machine 'DIMM_3' has 1024 MB (serial number E823981D)
Slot machine 'DIMM_2' has 512 MB (serial number F802488F)
Slot 'DIMM_1' has 512 MB (serial number F802485E)Hello
1. What is the brand and the model number of your TV tuner card?
2. is it compatible with Windows XP Media Center? She never worked properly on your computer?Method 1.
First of all I ask you to install the latest drivers for your manufacturer's Web site TV tuner card and check out them.Method 2.
Also, check out the methods listed in the articles below and check.
You receive an error message "No. Tuner available" when you try to watch TV Online after connecting a USB TV tuner to your computer Windows XP Media Center Edition 2005
http://support.Microsoft.com/kb/891108Update 1 for Windows XP Media Center Edition 2005
http://support.Microsoft.com/kb/873369I hope this helps.
-
Media center does not recognize the unencrypted HD channels
I'm trying to record live TV of TV that gets its strings by simply using the power (without decoder) coaxial cable. When I set up WMC, choosing the selection of regular (analog) cable packages it offers, I get all my channels except 5 or 6 unencrypted HD channels that offers my firmware. What are the channels that appear on my TV as fractional as channels 116.2, 117.2, etc.. I really want to record these HD channels. Is it possible to add them manually to the WMC?
Hello MtnGoat,
Thank you for visiting the Microsoft Answers site.
You can check that the card TV tuner and model is a compatible TV tuner of QAM.
In addition, you can check if you are able to view the unencrypted channels when the cable is connected directly to the TV.
Here is a useful link which includes information on taken TV signals supported by Windows Media Center:
http://Windows.Microsoft.com/en-us/Windows7/TV-signals-that-are-supported-by-Windows-Media-Center
For further assistance, you can also post the question to the following Microsoft Web http://thegreenbutton.com/ Windows Media Center Community site.
I hope this information is useful.
Thank you
Mary
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
Solution Center does not recognize the printer
The printer is a HP C7180. Operating system is Windows 7 (64-bit).
Solution Center says that printer is offline - but it is connected & running.
What to do?
Uninstall the HP Solution Center. Install the latest version of the appropriate operating system available on your printer's web support portal.
-
Why vista Media Center does not recognize my card tuner Hauppauge 1850
I just install WinTV-HVR-1850, Manager of device States work properly, yet Media Center does not recognize the tuner... Keep received message "no tuner found" not could someone explain what I need to do.
Hello
I suggest that you install the latest driver and software from the Web site below and check if it works:
http://www.Hauppauge.com/site/support/support_hvr1800.html
Try to contact the hardware manufacturer for assistance.
Hope this helps,
-
Qosmio F30 - 112 - Windows XP does not recognize the HARD drive
Hello.
I have a Qosmio F30-112.
I tried to install the Windows XP Professional instead of the Media Center edition.
However, during the execution of the installer, my laptop does not recognize the hard drive. Therefore, the installation cannot continue.I thought it might be a problem of corruption with my laptop and reinstalled Media Center Edition successfully.
But when I try to install XP Professional it always gives me the same error.Suggestions for the configuration of the BIOS or solutions for why this is happening?
Thanks in advance.
Hello
Just a question:
You are looking for in this forum for other similar issues with regard to the installation of Win XP and lack HARD drive? I doubtThe fact is that your notebook has a SATA controller and you need a SATA (Intel Matrix Storage Manager) driver.
You should have a look here in this doc from Toshiba:
[How to integrate a SATA AHCI driver into a Windows XP installation CD | http://aps2.toshiba-tro.de/kb0/TSB85017Z0000R01.htm]and should also search this forum for other threads
Good bye
-
When I go to move file e drive windows does not recognize the format
ORIGINAL TITLE: files and folders
running windows xp pro version 2002 service PAC 3, when I go to move the file e disc windows does not recognize the format, already file types are jpeg and php have tried a restore and fix computer center has not helped. Any suggestion or solutions would be appreciated ARTuro_974
Thanks to all the answers, don't know how, but the problem fixed, have learned a little about pc THANKS AGAIN to all.
-
Windows Media Player does not recognize the new downloaded songs
I have a Pavilion a4310f Prod Nr: race AY014AA-ABA, Win 7 Home Premium 64-bit.
I just found out that Windows Media Player does not recognize the songs, I recently downloaded from Wal-Mart music download Site. The songs can be seen in the music library in a folder called 'Downloads' and I can open each song and he will play when double-clicked. The problem is that I can't create a playlist containing the new songs and burn a copy of the reading list, because the songs are not listed in the Media Library Player any hot it is sorted (artist, Album, Genre, etc.).
Any help/suggestions would be greatly appreciated.
MitchProblem solved!
Went to: start == > Control Panel == > troubleshooting == > view all == > and ran troubleshooting on the library and the settings of WMP.
Convenience store detected library corrupt and "in media files appear in the WMP library. Then ran convenience store on WMP settings which reset OMP to default settings. After that, everything worked as announced.
Thanks to Big_Dave for putting me on the right track.
-
Windows 7 64 bit does not recognize the USB external drive HARD Stor E art 3.5 "
I buy the art external disk HARD Stor E 3.5 "and spend a few days in windows does not recognize the HARD drive. Try to connect the drive to other USB 2 ports and nothing happens. Use a USB to see if has been a problem with the USB ports, but all 3 are OK. Try it on the laptop Asus and windows 7 recognizes the HARD disk. I formatted the drive in NTFS FS. In managing records do not show the external HARD disk. What can I do to fix this?
My laptop is a Qosmio F60
This is a really silly situation. It can be recognized by other laptops but not your Qosmio.
According to the description of your HARD drive when connected simply doesn t exist for your Qosmio laptop.Some other HDD is recognized correctly?
What you can try is to reinstall the chipset driver, restart the laptop and test it again.Since when you have this problem? Some installed updates of the last days?
-
Windows 7 does not recognize the installation discs
Hello
I have a problem, and I don't know if there is a solution, but here goes.
My laptop is a HP DV6-7029WM Windows 7, 64 bit.
The hard drive was dead, and he was replaced last month. I sent it to HP. C is the hard drive, and was originally the recovery on D. Removable media were on E, and when I connected a USB stick or memory card reader it would on F.
When I came back, hard drive was on C as it was originally, and there was no recovery drive D. D is now my removable media drive. When I put in a USB stick or a memory card reader, which is now on the E drive.
After I bought this, I put the recovery on a USB key, but I've accidentally thrown out. (My mistake) So I ordered the installation diskettes after that I return my HP PC. I had 2 DVD system recovery disks and an Application and a recovery DVD Drivery.
I want to reinstall Windows back to the default settings. I put disc 1 (System Recovery DVD) and close. I reboot and it goes directly to the office. I hear the whirring disc, but nothing happens.
I go to the control panel > Recovery > advanced retrieval methods. I click on restart, and it loads files and then says DVD set, which I do. He told me that he does not recognize the installation disc.
I googled this problem and found a poster on CNET that had the same problem as I do. Also, I can't do a system restore. My problem is the same as this poster on CNET. I can read DVDs and CDs. Those that work very well.
http://forums.CNET.com/7723-19411_102-568059/Windows-7-installation-disc-not-recognized/
The files are on the DVD, because I see them.
I don't know what to do. Should I send my PC back? Can I do to solve this problem?
Thanks in advance.
pen
Hello:
With recovery disc 1 into the DVD drive, restart the computer and at the beginning of the HP welcome screen, press the ESC key to display a menu of options.
Select the F9 boot menu option.
Select the DVD drive on the list of bootable devices, and press the Enter key.
Watch the screen for additional instructions.
-
My Guest Windows XP account does not recognize the extensions of PDF Adobe Reader 10.
Regarding the files Adobe Reader 10 and pdf.
My account invited Windows XP does not recognize the extensions of files Adobe Reader 10. The program is installed and works very well in my admin account. When I try to open a pdf file in my guest account I get a prompt to "find the associated program to run the file.
Another problem related to this is when I click on the Adobe Reader 10 icon in the guest account, trying to configure every time instead of just open.
Hello
Make sure that you follow this step in the article below "click to select always use the program selected to open this type of file check"
How to change or choose the program that starts when you double-click a file in Windows XP
http://support.Microsoft.com/kb/307859I hope this helps.
-
8.1 Windows does not recognize the Touchsmart
8.1 Windows Pro does not recognize the Touchsmart. This work like a mouse when I click on the screen. In the properties of the system, said that will not have a pen and touch. Someone knows how to solve? Thank you.
Edit:
"HP ENVY 15t - j100 Quad Edition CTO Notebook PC (ENERGY STAR)
Product number: F5G56AARHi, I am a new customer of HP products. I made a mistake, my Ultrabook is
HP ENVY TouchSmart 15t - j100 Quad Edition CTO Notebook PC.My touchscreen stopped working, because I had updated the drivers using a 3nd software named 'Slim Drivers'.
This program was updated to some instances of my integrated video (HD 4600) and that make unrecognizable touch screen and display the touchdo has not worked.
I reinstall Windows 8.1 again and has been updated disks directly from the HP website and the problem was solved.
Maybe you are looking for
-
Firefox 5 worked well. I installed Firefox 7, and when I ran, tabs just say «connecting to...» "and hang up. Rebooting did not help. Sites Web open correctly in IE and Chrome. Disabled all firewalls and antivirus, nothing helped. Uninstalled and rein
-
Where is the iMovie projects folder on the new iMovie 10.1.1 App?
I'm going through a project for a new Mac iMovie folder (with all the latest news app) on an external hard drive so that I can give it to a friend to change. I type in the iMovie projects in my search for spotlight on Finder and it does not appear. M
-
installation of iOS 9.1.2
My ipad mini has a 29 GB of storage. I downloaded the iOS 9.1.2 but I can't install it. The last update iOS I had was iOS 6. I got about 3.5 GB of free space.
-
Hello We just purchased a Smart GS728TP PoE Switch. Unfortunately, when we plug in a new device requiring of PoE, the switch must be rebooted before will recognize (and power) of the new device. It works without problem once this has been done. I rai
-
Hello, I'm getting data in Excel in table, then I use block 'sim arbitrary signal' to define a dt I need and to trace the signal (it is the voltage signal). Then I need to get a 1st derivative of this signal. and here I'm getting cause problems after