If I have a gift item I will advise if the person already owns?

Similar Questions

• When you restore the backup on itunes, will be saved the apps already on the ipad?

  Hello

  When you restore the backup of itunes

  for an air2 ipad has already I want to keep, new applications

  the new left on ipad?

  Thank you very much!

  Backup restore will overwrite the device.

  You can re - download apps that are absent from purchased.

• I have a pavilion p6130fpc and it will not see the drives.

  I have a pavilion p6130fpc that will not see the drives. I tried 3 different hard drives and change the cable and port twice. I have also reset the BIOS and pressed the power button for five seconds after you disconnect without success. Someone at - it any other ideas?

  Willman,

  Unfortunately you are not alone. HP has sold a lot of different models with the M2N78 - motherboard. The problem is that the manufacturer of the Board of Directors (not HP) set up a controller chip NVidia which tended to overheat. Once this chip goes, ur stuck. The SATA ports are controlled by this chip.

  http://h30434.www3.HP.com/T5/desktop-hardware/m8530f-desktop-PC-with-a-M2N78-la-mother-board-doesn-t-see-my/TD-p/181716

• Sometimes the browser does not allow me to come back. For example, when it is on Wikipedia, if I click on a photo, I can't go back to the previous page. Previous versions of Firefox did not have this problem. How to bring back the old version?

  The new version is a downgrade.

  Click the Firefox button, and then select Add-ons to open the Add-ons Manager. If you have McAfee Site Advisor, it will appear in the Extensions section. If you do not have one, an another add-on can cause the problem. The following link shows how to establish if this is the case and identify what is causing the problem - https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

• I have 12 items. I just downloaded the most recent update. It will not open the RAW files from my Panasonic TZ70?

  I have 12 items. I just downloaded the most recent update. It will not open the RAW files from my Panasonic TZ70?

  See the faq for the compatibility of ACR:

  FAQ: Photoshop Elements will work with my camera, or why does not open my raw files?

  Your camera would need ACR version 9 which is not supported by 12 elements.

  You can:

  -upgrade to 13 items, with updates of version 13.1.1

  - or use the free DNGconverter mentionned in the links at the bottom of this faq. You'll be able set of entire folders to convert your raw files to DNG PSE12 can read and modify.

• A gift card balance will be used before using a credit card?

  A gift card balance will be used until your credit card is charged?

  Yes, with the exception of gifts and other items that require a credit card.

  (140659)

• I can not pair my Apple Watch with my iphone 6 s so true the automatic procedure freezes the app on my iphone. If manually matching the 6 digit code will appear on the Apple Watch. I have the current ios 10.0.1

  I can not pair my Apple Watch with my iphone 6 s so true the automatic procedure freezes the app on my iphone. If manually matching the 6 digit code will appear on the Apple Watch. I have the current ios 10.0.1

  does anyone have a solution to this?

  Hello

  The following steps can help (try again after each):

  • On your iPhone, in the application of the watch, go to: Watch My > general > use > software update - remove any file update, if one is displayed.
  • Delete all profiles beta (on your iPhone and/or the watch), then restart both devices (this applies only if you have already participated in a program of Apple Beta software).
  • Restart your iPhone and your watch:
    • Close open applications on your iPhone:
      • Double-click the Home button, and then drag upward on each Preview app to close.
    • Close the two devices together, and then restart your iPhone first.
      • Restart your iPhone, iPad or iPod touch - Apple Support
      • Restart your Apple Watch - Apple Support

• I have two monitors and Firefox will not come on the screen.

  When I try to open Firefox it will not load on each screen. Looks like he's trying to go to the secondary screen, but is not visible. The OS is Windows 7 Home first Service Pack 1. Firefox version 37.0.1
  Thanks for your help.
  Jerry

  You get a sticker or other indication on the Windows task bar that there is a window of Firefox "somewhere", but it is not visible anywhere?

  If there is a tile (or a title of the window above the Firefox button in the task bar):

  The Firefox window sometimes opens off screen. If you have a multiple monitor configuration, make sure that both monitors are on. Other users have reported that sometimes Firefox acts strangely while the second monitor is turned off. You mentioned that both monitors are on in your case.

  In all other cases: you can often force the Firefox window is displayed on the screen by double clicking on the thumbnail image just above the taskbar and choose expand. Does it work?

  A possible cause for this is that the file that stores the positions and sizes of window is corrupt.

  #1 method: If you can get a zoomed window:

  Open the settings folder (AKA Firefox profile) current Firefox help

  • button "3-bar" menu > "?" button > troubleshooting information
  • (menu bar) Help > troubleshooting information
  • type or paste everything: in the address bar and press Enter

  In the first table of the page, click on the view file"" button. This should launch a new window that lists the various files and folders in Windows Explorer.

  Leave this window open, switch back to Firefox and output, either:

  • "3-bar" menu button > button "power".
  • (menu bar) File > Exit

  Pause while Firefox finishing its cleanup, then rename xulstore.json to something like xulstore.old. If you see a file named localstore.rdf, rename this to localstore.old as well.

  Launch Firefox back up again. Windows normally appear again?

  #2 method: If you can not get a Firefox window for all:

  Close Firefox by right clicking the icon in the taskbar > close all windows.

  Using the Run dialog box (windows key + R) or search from the start menu (bar (or, in Windows 8 may bar charms bar research?) type or paste the following and press ENTER to drill down to the profiles folder):

  %APPDATA%\Mozilla\Firefox\Profiles
  

  Here you can see a folder - in this case, double-click that - or more than one case - in this case, double-click on in what looks like the most recently updated.

  Scroll down and rename xulstore.json to something like xulstore.old. If you see a file named localstore.rdf, rename this to localstore.old as well.

  Launch Firefox back up again. Windows normally appear again?

• I have a 6 and when I said an iMessage that he will tell me when the person read it then it will say delivered once again so I don't know when it was read

  I have a 6 more and when I send an iMessage he tells me when the person read it then it will say delivered once again so I don't know when it was read

  I have exactly the same problem since I updated to 9.3, the 9.3.1 update didn't fix either. Apple support think it could be a software problem or operations and I have tried literally everything! Have you found a solution for this yet?

• My family will travel to the United States to the Mexico.  I have to update my position when I reached my destination, so my map app will work here?

  My family will travel to the United States to the Mexico.  Do I need to change anything on my phone about my temporary location when I reached my destination so my map app will work properly in MX or the GPS automatically adjusts?  I ask because I don't want to go & have my battery to grind to stop as he tries to understand my new location.  I have an IPhone5, iOS 9.2.  How to make the change if the change is necessary?

  Your phone gets your location by connecting to the GPS satellites. Using location services works with battery. However, it will not use more independently connect to the Mexico it makes when it finds your place here.

  When you do need to make sure to do is to contact your cellular carrier and make sure that your account is enabled for international roaming and you understand what can be the cost.

• I have a Kodak esp3.2 printer... I am trying to print a receipt... printer will only print the title

  My question pretty well summarizes my problem... printer will be only to print the topic... rest of the page is blank... This receipt is necessary in case I need to return the product. Wal-Mart has suggested printing the receipt... so whats up don't you assume? as I said before, I'd really appreciate any suggestions... RL

  Moved from feedback

  Original title: I have a Kodak esp3.2printer... I am trying to print a receipt of my computer... printer will only print the title... help! enjoy suggestions... RL Herrin

  You will need to contact Kodak support.

• Some icons on my desktop have an e page and will be open to display the download box

  Some icons on my desktop have an e page and will be open to display the download box, his options are open or save, it makes anmd attempto opened, but it does not open

  the application, the same box opens with the same options and so on.  What can I do to fix this?

  Hi jlbarrie,

  1. what operating system do you use?
  2. do you get an error message?
  3. you have made no changes to the computer before the broadcast took place?
  4. have you download and save web pages?

  Run the next fixit.

  Difficulty of broken desktop shortcuts and common system maintenance tasks
  http://support.Microsoft.com/mats/system_maintenance_for_windows/en-us

• I am trying system restore and it says I have no restore points and will not let me create restore points

  help I am trying system restore and it says I have no restore points and will not let me create restore points
  * original title - find search indexing index reindex re-indexing research research research service troubleshooting troubleshooting *.

  Hello

  1. what exactly happens when you try to create a system restore point?

  2. you receive an error message when you create system restore point?

  3. what operating system is installed on the computer?

  In the event that you use the Windows 7 operating system you can follow the steps below and check if the problem persists.

  Method 1:

  Step 1:

  Locate the service associated with the restoration of the system or Volume Shadow Copy Service is started after the computer is restarted. This service can be stopped by some viruses as well, so you can try to run a scan of your computer.

  To check the service

  (a) click Start

  (b) in the start search box type Services

  (c) click on - RUN as ADMINISTRATOR

  Check if the below mentioned services has mentioned State and type start.

  Shadow copy volume started Automatic\Manual

  Step 2:

  Also check the dependency services that are required for the System Restore Service run.

  To verify that double-click the service, and click the Dependencies tab.

  This service must be started before the restore point is created automatically or manually.

   

  Method 2:

  Try disabling the firewall and windows temporarily on the computer security software and then try to create a system restore point and check if that helps.

  Follow the articles given below to change the settings for the firewall and security software settings

  Understanding Windows Firewall settings

  http://Windows.Microsoft.com/en-us/Windows7/Understanding-Windows-Firewall-settings

  Firewall: Frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/firewall-frequently-asked-questions

  Disable the anti-virus software

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Note:

  If you are able to perform the system restore after you disable the security software then you may have to contact the software publisher for the security software by disabling the firewall and security software is a potential threat to the security of the system.

   

• I have been informed if you have Vista Home Premium windows will give you windows 7 ultimate for free. Is this true? And who should I contact to go forward with this place.

  I have been informed if you have Vista Home Premium windows will give you windows 7 ultimate for free. Is this true? And who should I contact to go forward with this place.

  Please see the bulletin: Windows 7 Upgrade Option Carey Frisch

• I have a cd and dvd ROM on my computer but it will not read the discs and is not recognized on my computer

  Original title: no dvd

  I have a cd and dvd ROM on my computer but it will not read the discs and is not recognized on my computer

  Hi Lesliestones,

  ·         Did you do any change on the computer before the show?

  Follow the suggestions below for a possible solution:

  Method 1: I suggest refer you to the article in the Microsoft Knowledge Base and check if it helps.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/982116

  Method 2: You can run the fixit and check if it works.

  Your CD or DVD drive cannot read or write media

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  I hope this helps.