If I shoot in 1080/30 p what can I export in 1080/60i?
If I shoot in 1080/30 p can I export him to 1080/60i? Thank you!
Test this would have taken a very short time. And think about this... There are many codec options available some inckude options that you list. PrPro is designed for the export of these options.
Why wouldn't it here?
Neil
Tags: Premiere
Similar Questions
-
If I can shoot in 1080, but I intend to download in 720, edit in 720?
My camera doesn't shoot in 720 p, so I shoot in 1080 p. I always download my long program of weekly time in 720 p. Should I use a 720 p timeline? If so, this should make the faster encoding, right?
Thank you.
Tom
UUnless get you I don't think it will make a difference in the export. However, the 720 offers the advantage of cropping.
-
I clicked "Remove from toolbar" when wanting to shoot to the top of what I had downloaded - how to restore DOWNLOAD arrow on the toolbar? If I download an update of some kind - or a program, I should be able to click on the arrow that appears on the upper right side of the browser - right than the blue? I can't figure out how to restore! I even tried to close and reopen the browser to see if it will rest - but no.
I am not programmer - so I need simple instructions!
Help, please!Type of topic: customization< enter > in the address bar.
In the new window, look for the icon. When you find it, press and hold
the left button on it and move it to where you want it to be.
You can move the icons you want here, but
some icons are locked in place. -
How to get the best resolution on Blu - ray (1080/60i)
I'm experimenting with my new AG-AC160A camcorder and have been shooting young hockey games in AVCHD, 1080/60i, 1/120 shutter mode, white balance manual gain layout file properly resolved and fluorescent scene due to the lighting in the arena. I have PD CS5 and I'm disappointed by the relative sharpness HD lack when the release of the Blu - ray play on my HD set LED. I used the settings above, based on the recommendations that I saw in the forum somewhere. Any suggestions on what I can try differently? Thank you.
Your sequence is defined on the framerate bad (time base)
Your camera takes snapshots 60i which means the framerate is 30 (29.97) FPS.
The video preview is also strange.
You can use one of the standard avchd presets, that you will install nicely.
I would not use Dynamic Link, I find that you have control over what you do.
Use the Media Encoder and export to H.264 BluRay upper field.
That are still important, do menu and burn.
-
I tried to move my music and my pictures of my Macbook Pro 2012 to other Macbook Pro 2009, but the older one is absolutely remained stuck. So I unplugged. Now, it will not be read by Macs, and give me a message, the external drive is not readable by this computer. Both are running on the same iTunes updated and Maverick. What can I do to recover thousands of photos and CD?
The disc in particular is either corrupted or has failed. If you don't have a backup, you find yourself working with a data recovery service, which will not come cheap, and they don't guarantee any results - to try to shoot everything that is left behind. Reformatting the drive - if it has corrupted and not failed - could bring the disk itself to the utility, but that won't help with any data on the disk.
-
Black 'show shadow clipping' seeing not self-extinguishing. . What can we do? I tried what is obvious. There is no evidence of clipping.
Lightroom version: 5.6 [974614]
License type: Perpetual
Operating system: Windows 7 Ultimate Edition
Version: 6.1 [7601]
Application architecture: x 64
System architecture: x 64
Number of logical processors: 8
Processor speed: 3.3 GHz
Built-in memory: 16364,3 MB
Real memory for Lightroom: 16364,3 MB
Real memory used by Lightroom: 1055,2 Mo (6.4%)
Virtual memory used by Lightroom: 1071,8 MB
Memory cache size: 2.0 MB
Maximum thread count used by Camera Raw: 4
System DPI setting: 96 DPI
Composition of the Bureau enabled: no
Exhibition: 1) 1920 x 1080, 2) 1920 x 1080
The application folder: C:\Program Files\Adobe\Adobe Photoshop Lightroom 5.6
Library path: C:\Adobe Lightroom Catalogs\2014_05_31 .lrcat (3)
Settings folder: C:\Users\XXXX\AppData\Roaming\Adobe\Lightroom
Plugins installed:
(1) home canon Plugin
(2) Facebook
Config.LUA flags: None
Map #1: Seller: 1002
Feature: 6739
Subsystem: 25201462
Revision: 0
Video memory: 1003
AudioDeviceIOBlockSize: 1024
AudioDeviceName: Speakers / headphones (IDT High Definition Audio CODEC)
AudioDeviceNumberOfChannels: 2
AudioDeviceSampleRate: 44100
Build: not initialized
CardID: 26425
Direct2DEnabled: false
GPUDevice: D3D
MaxTexture2DSize: 8192
OGLEnabled: true
Renderer: AMD Radeon HD 6800 Series
ShaderModel: 11.1
Seller: AMD
VendorID: 4098
Version: 1002:6739:25201462:0000
First of all, this image is not a raw image. It's a little gross tablet of some sort so algorithms normal demosaicking from Adobe are not applied, and Adobe is having to reverse engineer R, G, B channels of Y, Cb, Cr channels, so something can be not optimal this conversion.
Second, at least with this non - raw Y, Cb, Cr image, there are a few pixels Y which have zero value in the file, so no matter what you do, other adjustment of the lower part of the tone above zero curve, they will be cut off.
It also seems that the clipping indicator triangles are unaffected by the detail of parameters so turn off all noise reduction or sharpening is necessary shows you which pixels cutting triangle is seized off the coast of.
Here's your open picture in a RawDigger which is a gross analysis program that indicates the channel is there a minimum value of 0:
Here is a screen shot of LR with a very small crop on the shaded above background area interpreters, with parameters off retail - no sharpening or noise reduction and toning parameters as bright as possible, and in this area of congestive crops, there are a few black pixels which are highlighted blue if I turn on the clipping indicator It is not surprising that with this image, at least, the black clipping indicator won't turn off very easily. In this side-by-side, they have the same settings, but the before image is without the clipping indicator and the image after is with the committed clipping indicator so you can see the 4 pixels that are 0 in the tiny cropped area:
Here's a DNG of parameters such as the LR capture screen above, other than the built-in preview that seems to be the whole picture, not the tiny area cropped:
https://DL.dropboxusercontent.com/u/9905000/Dab_143378_smallcrop_maxedtoning.DNG
-
A shooting game of FCP gave me .mov PP CS5 can not open, what can I do? I guess she re-tensioned files because as they try to import in cs5 a FCP loading diologe box opens indicating: FCP XML import... Then he says that I don't have the codec necc.
I am PC based only.
Here is a link to a short clip which can be downloaded.
I'm really stuck here guys. Can not reach the shooter.
The second clip 5 can be seen and downloaded from Vimeo:
FFmbc has 32-bit, I think... so should work on Windows 32-bit or 64-bit.
No, I can't code to save my life. FFmbc is an offshoot of FFmpeg, into a vein a little more professional/broadcast. Read more here: ffmbc - FFMedia prod - Google Project Hosting
I just worked (a lot) to try to understand how to use it to create files that Premiere Pro will accept. There are some things a bit to roll up his sleeves and they're really more useful and more publishers of FCP switch.
-
ACVHD 1440 x 1080 60i converted to SD is crushed?
Hi there will...
First of all, as I see many others, I'm new here HD edition, thanks a lot for all the help of those who have the knowledge!
Ok.. My problem,
I have a few fottage .mts recorded on my new Sony HDR-CX550v
I use CS4 master suite (first and still)
Remains with HP PC
The source is 1440 x 1080, 60i
I want to convert to serious SD and play on a regular DVD, again using
I went to Jeff Bellunes Tutoriels (who have been great, I learned a LOT) on the HD - SD conversion... BUT...
all his examples use HD 1920 x 1080 xx, so...
I shot some test footage at 1920 x 1080 60i and intervened although its procedure and it worked great... BUT...
(and that's the problem)
As noted above, the actual source footage, I NEED to convert was filmed in 1440 x 1080 60i (widescreen)
I used the same procedure as 1920x1080i Jeffs tutorial, but when I took the result, then out again
(nothing special yet... just did a simple a word-transformed into a button in the menu, linked the timeline button, related the end action of the calendar back to the menu, then returned to a folder and engraved on a DVD)
When played on the DVD SD the result low high Squashed crushed another drive... makes everything look small and bigger...
When I started the project in first, I adapted the source: X.V. 1440x1080i30 (60i anamorphic)
that, in the first are States in the preset description box:
For editing AVCHD Formats saved in 1920 x 1080 anamorphic (ex.1440x1080).
16:9 video HD interlaced at 29.97 frames per second.
audio at 48 kHz.
Timecode offset for numbering.--------------------------
General
Editing mode: AVCHD 1080i anamorphic
Time Base: 29.97 FPSVideo settings
Image size: 1 440: 1080v (1.3333)
Frame rate: 29.97 FPS
Pixel format: HD 1080 anamorphic (1.333)
Fields: Upper Field FirstAudio settings
Sample rate: 48000 samples/secondDefault sequence
Total of the video tracks: 3
Master the track type: stereo
Mono tracks: 0
Stereo tracks: 3
5.1 channels: 3
SUBMIX mono tracks: 0
SUBMIX stereo tracks: 0
5.1 submix tracks: 0I guess that's the correct preset for my images...
And then following the tutorial by Jeff for 1920x1080i
I'm in the media encoder,
Export media
Choose MPEG2-DVD Format
NTSC widescreen high quality as a preset
In the video tab: change the order of the fields to stem
Bitrate settings changed: Encoding Bitrate VBR 2 pass.
Change Min.Bitrate to 2.8, flow target flow and 7-8
make the selected maximum use,
left on zero multiplexer
and kept the default audio settings
then moved on to M2v and associated .wav file
Here's what I imported as assets in, made to a TS file and burned on a DVD
I also did a .wmv export by using the windows media format / NTSC widescreen to download high quality preset
for a file to load up on youtube... and it seems well... no crash and the quality is very good.
() http://www.youtube.com/watch?v=mK9n7zjXMS8 ( )
the settings in the tutorial do not work for 1440x1080i? Like I said before, when I used the images of test 1920x1080i, he played on the DVD SD player perfectly with GREAT quality...
Please any help would be greatly appreciated... hope I'm not on for more details...
I really need to get these images converted...
Thank you
CB
I'm in the media encoder,
Export media
Choose MPEG2-DVD Format
NTSC widescreen high quality as a preset
In the video tab: change the order of the fields to stem
Bitrate settings changed: Encoding Bitrate VBR 2 pass.
Change Min.Bitrate to 2.8, flow target flow and 7-8
What setting did you use for the format of pixels? Did you leave it by default?
What your DVD player? What you set as the display format (Normal, wide screen, stretching, etc.)? What type of TV? You have a big screen HDTV or a standard 4:3 CRT? The settings in the DVD player matches the type of TV?
Finally, when you import the M2V file in en, in interpreting it correctly, IOW, it appears correctly in the preview yet?
-Jeff
-
I have someone just showed about 100 pictures of my iPad. Now, the pictures are missing, and the "recently deleted" folder is also empty. What can I do?
Have you done something after their show.
-
Hi I forgot my apple ID and password what can I do to unlock my phone?
Hey
I forgot my apple ID and password
What can I do to unlock my phone?
If the iPhone has a Lock activation, and you do not remember your AppleID and the password, you can do anything, but to hold the iPhone back to the next Apple Store with proof of purchase.
The activation of the locking can be disabled without your AppleID and the password.
-
After the installation of Sierra, Web sites started to follow me like crazy! This has not happened before. Why this is happening and what can I do to stop it?
What are your privacy settings in Safari preferences.
-
I downloaded sierra and tried a reboot. However, I have a screen now States in which Mac OS could not install. "Declaration of file check or repair failed. Quit the installer to restart your computer and try again. "I've done thisand it comes down to the same screen. What can I do?
Try to look into the demands of Sierra and if it is there double click it. If the problem persists, you should first check to see if your computer meets the minimum system requirements. If it meets the minimum requirements, then it is possible that you have corrupted DOWNLOAD, or you have hardware problems.
-
I plugged my iPhone 6s and loaded yesterday evening? This morning, I hit the Start button and message with the time my page comes up but it shakes and will not delete by dragging the screen and will not turn off by pressing stop button on the side of the phone and the market. What can I do?
Hello
Your iPhone became unresponsive, try restarting force holding down the sleep/wake and Home button for about 10 seconds, until you see the Apple logo.
-
My apple what ID does not accept my phone number, what can do?
When I try to add my phone number to my apple ID it says that the number is already tied to the account, however, is not show it. What can I do? And because of that, my FaceTime and my iMessage will not work with my phone number
Go to settings/Facetime, type on your Apple ID and log off. Then log in again and turn on Facetime.
-
My speed has decreased between the router and the modem is not working properly, what can I do to increase the download speed with my Time Capsule 802.11n
A variety of phenomena can affect the performance of its wireless network. You may be able to mitigate some negative effects.
Solutions to any factors that may have an impact on your wireless network, read use the Diagnostics wireless for you help to solve the problems of Wi-Fi on your Mac - Apple Support.
Maybe you are looking for
-
There are several sites that I connect to (Netflix, Amazon, Hello Firefox, etc.) who are reporting that I use an older version of Firefox. I'm versions 36.0 performer, who reports to be updated. I am at a loss.
-
They are small pop up windows. When I start to enter key words to search for, very often these things pop up and not a single one. A lot of them. Popping each other on the other on the other. I can't enter anything again in the Google search box unti
-
HP pavilion dv5: black screen only see cursor
After you connect to the screen turns black with only the cursor indicating
-
Hey all - serious brain issue today. I have a core switch with a port set to VLAN 10 & 20 tag traffic. In this core switch port, I have a GS748T, where I'm the odd ports # be vlan 20 & ports even # to vlan 10. Objective:I have a DHCP server, which se
-
Hello, I plan to update my graphics card and cpu for my im cpu get an i3 2120. For my gpu im planning on getting a Gtx 550 ti, then my PSU handle both? Be my BIOS and motherboard is compatible with my gpu and cpu?