How to get the best resolution on Blu - ray (1080/60i)

Similar Questions

• EliteBook 840 G2: How to get the best resolution on hp EliteBook 840 G2?

  Hi, my laptop maximum resolution is 1366 x 768, which I find too low.

  Can I upgrade the graphics card to get a higher resolution?

  According to the Windows Device Manager, it seems that I have 2 cards different graphics that are:

  AMD Radeon R7 M260X

  Intel(r) HD Graphics 5500

  Thank you!

  It is possible that the screen is only capable of 1366 x 768.  Check the screen resolution page (right click on a space empty on the desktop and choose 'Screen Resolution') to see what who said that the display is capable of.  THIS PAGE lists a selection of display of 1366 x 768 as one of the original choices.

  14 "diagonal of the SVA HD anti-glare flat backlit by LED (1366 x 768) if that's what the PC came with, there is not a resolution (1366 x 768)

• Unable to get the screen resolution of 1920 x 1080 on my W520

  I just got a W520 with a NVIDIA Quadrom 1000 M and I can't seem to set the screen resolution of 1920 x 1080 (maximum resolution that I am able to do is 1600 x 900).

  then the screen that was provided was 1600 x 900

• How to get the best performance high video for HP Pavilion Notebook m6-1002sa

  
  

  On the screen of the laptop, not a monitor outside, isn't it? Fortunately, it is not really difficult. There is only a single resolution to use: the native resolution of the laptop screen. Yours is 1366 x 768. Any other resolution looks blurry, and you cannot set a higher resolution than all. True HD 1920 x 1080 video will be challenged on your Panel and will be cut.

  You must also set the brightness to max unless you use the battery. The rest will be largely take care of itself. Digital billboards as a computer screen manages the contrast and the color almost balance automatically, although there are adjustments in the control panel for the video card. You have the dedicated video of 7670M (2 GB of DDR3 memory) AMD Radeon HD, so you should have an AMD/ATI Catalyst Control Panel. Search through the list of programs.

  This will give you an idea what you can do with the Catalyst Control Center:

  http://www.Tweakguides.com/ATICAT_8.html

  You can change how the video card will present films, for example, a bit like the adjustment on a flat screen TV smart (normal, studio, cinema mode, etc.). What is best is a matter of preference and I can't is the experience a bit until you find what you want.

  If you need assistance.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• How to get the best image quality when you insert PDF into Word?

  I am able to insert a PDF file as an object in Word, but the image quality is a bit fuzzy.  Is this what I can adjust in order to improve the clarity of the image in Word?

  You can try to extract the images with the help of extract all Images or select only the parameters of the screen recording you get when you save in a DOC, but I think that the general result is that the image recorded with the same resolution as shown in the PDF document. It may be that you simply adjust your screen in WORD. You can look at the picture in WORD and see if it is used at 100% or some other resolution. Bitmaps are not very forgiving if the resolution is changed to the document and not as something other than the small number of fractions of resolution appears change.

• How to get the best connectivity WLan on Satellite U200

  I wonder if everyone is disappointed by the scope of the U200 wireless.

  I always find that my laptop shows 2 bars for their my BT hub (on the floor) when my eeepc located beside the laptop displays 5.

  I also found in other places that my partners laptop detects wireless networks much more that I do.

  I would prefer to explore the possibility of increasing my wireless connection before moving my BT hub to give me a better reception. being able to find the hub with my laptop wherever I am at home (like my partners)

  Anyone got any ideas please?

  OK, a few points of view but no ideas... I've now experimented with an external wireless adapter

  I have a toshiba satellite pro u200 with built in WiFi. I have also 2 adsl providers in the House (one is cancelled as soon as I am happy with the new - but I'll take the opportunity to experiment at the mo to try to resolve some problems)

  I have a wireless router in my office (the service of Virgin Media 2 MB - VM), the other is upstairs (BTHomehub 8 mb - BT)

  Using the built-in tosh Wireless adapt if I'm sitting 2 laptops side by side on my desk both pick up VM 100%. (tosh and eeepc)-c' is the case that the router slot in the Office!

  If I'm sitting the same 2 latops on my desk and get them to connect to BT, the onlys tosh gives 2 bars, the eeepc 100%. (by bars, I mean view available networks - see 5 bars to show the strength of connection)

  If I then plug an external 108Mbps Netgear WG111T Wireless USB 2.0 for the tosh connection adapter improves to 4 bars.

  can I do the built in WiFi on the tosh to improve things or am I better to use an external adapter. If I use the outside how tosh knows which adapter to use? as I have the switch wireless to the position we don't if this activate the integrated?

  Allow the pc show the network show the icon when connected and can see the speed to 54Mbps - whatever that means?

  shouldn't I expect to see 108 Mbit/s if that's what the external netgear is capable of?

• Compression of Facebook - how to get the best quality?

  Hi all

  I am a new user of Adobe first Pro CC was used for almost a month now and have produced videos and download them to youtube and facebook. I am aware that youtube and facebook compress the videos we download thus bringing to reduce its quality. I noticed that facebook compresses videos I upload more than youtube as the qualities that I download there are poor quality when already streamed on facebook. I wonder how I'll be ale to avoid having videos of bad quality on facebook, even after that it compresses the video. I used to use the formats below when I export my videos from Adobe first Pro CC using Media Encoder:

  Video

  -H.264

  -Width: 1920

  -Height: 1080

  -Frame rate: 24

  -Command field: Progeressive

  -Appearance: Square Pixels (1.0)

  -TV standard: NTSC

  -Profile: high

  -Level: 4.2

  -Bitrate: VBR, 2 pass

  -Target Bitrate: 16 Mbps

  -Maximum Bitrate: 62.5mbps

  Audio

  -Audio format: AAC

  -Audio Codec: AAC

  -Sample Rate: 4800Hz

  Channels: stereo

  -Audio quality: high

  -Flow rate: 320 kbps

  I use restore maximum quality in all my vids and I always get bad quality video and audio SPECIFICALLY. Audio is a lot more important to me that I post on youtube and facebook of cover song and this problem bothers me whenever I post my videos. The audio I use is also, in a uncompressed. Exported from Adobe Audition CC WAV format. I hope someone can help me with this. I know that there is a solution to this I see Facebook videos that are really good in terms of quality audio and video.

  Thank you!

  How can I make sure that my videos are of high quality. Facebook Help Center | Facebook

• How to get the best possible, clear picture for our Web site

  Hello, I have a number of printed circuit boards to put on our Web site and I have decrease in size and the photos never seem that great. I use the Save to the web parameter in PS, but I was wondering if there was maybe I should customize when I'm there to increase clearity.  This is what it looks like when I shrink in size. Geeeez...  Any information would be helpful.

  Thank you

  T

  

  It seems that you save as a GIF. Instead, use JPG or PNG.

  And how did you resize? The edges look fairly irregular, but that might be in GIF format.

• How to get the best performance with a McBook Pro 2, 3 GHz and 16 GB of Ram?

  Hello

  I recently bought a MacBook Pro and I want to optimize my After Effects preferences to enjoy better performance.

  There are specifications of Apple:

  • 2.3 GHz quad-core Intel Core i7
  • Turbo Boost up to 3.5 GHz
  • 16GB 1600 MHz memory
  • 512 GB PCIe-based flash storage
  • Intel Pro Iris graphics card
  • NVIDIA GeForce GT 750M
    with 2 GB of GDDR5 memory

  Thanks in advance if any of you could help me do this

  Maurice

  Performance optimization: Adobe Premiere Pro and After Effects | After the effects of interest area

• How to get the best song off that poor record?

  Hello!

  I have a few really poor quality recordings, but since there is a debate, I would like to strengthen the voice to be able to clearly hear the speech, never mind the rest.

  It looks like the basement and without acute, adding that helps a little, but not really. Maybe someone could try and let me know what can be done?

  Here is the sample file: http://www.filedropper.com/13062009partial1

  Thanks for any help!

  topomorto wrote:

  You could always split registration on band of frequencies in two files and process them separately.

  What do you mean by that?

  If you want to do the dynamics of transformation with different settings on different frequency ranges, you must either a processor multi-band, or you need to separate frequency bands in different files.

  At the hearing, there is a multiband compressor, but not a multiband Expander.

  So, to do the expansion/blocking, you can take two copies of the file playing simultaneously in multitrack mode, delete or filter high frequencies of one and the low frequencies of the other and then treat them differently.

  And one more thing. What do you think, is it reasonable to use dynamic processing to amplify the low frequencies without touching the highest, to make the entire track more balanced and also stronger?

  You can try to use the multiband compressor to do this work. (who is a processor multi-band, so no need to split your file in the path I was describing).

  That's what modern pop producers to the slopes to maximize the volume - some people really hate the effect because it can lead to audio very harsh sounding!

  By the way, did you know that in the spectral display, you can simply select frequency, and boost / cut them directly? :

  

• How to get the best CPU consuming sql oracle 10g

  I see the top sql by running the report from ASHES. but there is too much information. is there a way I can just view TOP SQL section and filter the other parts? This way I can use it in a shell script and loops through the database.
  
  or are there that a query can do the work of ASHES?
  
  Thank you.
  
  Karl

  Have you run tkprof on the trace file to consolidate the results?

  HTH - Mark D Powell.

• How did get this Popup Menu of Blu - Ray?

  Hello

  ??

  Steph

  Not in yet? I think that settles that, because unless you are able to pay one of the more expensive BD creation solutions such as Bluprint, Scenarist BD or DoStudio I see no way to create this type of interaction nested and parametric.

  Mylenium

• How to get the system screen resolution

  Hi all

  
  I'm developing a flex application in adobe flex3. When I draw components in the design area flex builder is set to "Fit to window". so application are displayed on my monitor(17") correctly, but when I try to run the same application to another computer or a laptop of 14" display screen is different than the screen of the monitor is short, I need to scroll down to see the full page. My question is how can I make sure that the application should search for uniform on different platform/different browsers and different monitors (regardless of the dimensions of the monitor).

  And how can get the screen resolution of system during execution?

  
  Thanks for all the help and support.

  Look in flash.system.capabilities.  Note that any application based on a browser usually does not control how big be.

  Alex Harui

  Flex SDK Developer

  Adobe Systems Inc..

  Blog: http://blogs.adobe.com/aharui

• How to get the PE9 DVD to play on the new blue ray players?

  I upgraded to PE9 because my PE2 dvd play on my new blue ray LG or Sony players.    Unfortunately, PE9 discs do not play or the other.   How to make the disks that are going to play?   It is a real disappointment, since my goal is to change the years of family videos and make a nice set of DVD pick up and watch it with the family.   I can't believe that people that I send to the family to go including our buy a DVD player (and some of them do not work either)...

  Help?   He is not much of interest to one program editing if you cannot produce a final result for video display!

  p.s. I'm happy to do all the work around that will work... burn a file on the disk and access through the data area of the BR player?    Use another program to take the exit PE9 conversion and make it playable on dvd s... anything that works is fair game.

  Thank you

  David

  David,

  DVDs created with pre will normally play on most players, if DVD or BD. However, no DVD, or BD player is certified to play ANY disc - DVD-video or BD. They are certified only to read discs replicated in trade. Some players are better at handling serious records, than others. This ARTICLE will give you more background and some suggestions to get the best possible disc.

  In a Word, two major considerations are the brand of blank media. What brand do you use?

  Then, and although it is less important than a few years ago, the media type may play a role. What type, - R, or + R, are you using?

  Burning speed can contribute to the quality of combustion, but forwards, we limit ourselves here. Pre will be a speed of blank media, the speed factor of the burner, and then choose the highest speed. Normally, it will be OK, but when things do not work, I recommend a different workflow:

  Burn the project to the file. This will create a VIDEO_TS folder, where you choose for the Destination, which will include the necessary IFO, BUP and VOB, files. At this point, I would like to use DVD software to test the game the VIDEO_TS folder. Then, we use a burning utility, as big, free ImgBurn to do the physical burn on the disc and choose the VIDEO_TS folder (with files). Here, you can adjust the burning speed. I recommend about 1/2 down the list of possible speeds. It takes more than a few minutes, but is often the secret to burning discs with high playability.

  I'd also look on from the mfgr of the multi-lecteur. Web site and then download and install the latest firmware for this model drive.

  Once finished, test the drive in the Multi-lecteur on the computer using the DVD playback software. If it works, then the disk is fine, but could not yet be seen by a set-top player, and this is where the first two steps we just get the best possible drive.

  Good luck

  Hunt

• How to get the resolution of all screens

  Hello, I am trying to get the screen resolution and the position (display two left or right of a display) all connected screens (normally two) of LabView 8.6. My idea was to take the .net 'system.windows.forms.screen' class, but there is no public constructor.

  Can someone help me?

  Best regards, Nicolas

  Hey,.

  You can use a propertynode on the class of application with the property "Display.AllMontiors".

  Christian