If I upgrade to Vista will be my XP programs always work and work properly?
If I use a Windws Vist upgrade (without service pack) to upgrade to windows Vista, windws XP always my programs work?
Can I install a Windows XP-based software after I upgraded to Windows Vista?
If I use a Windws Vist upgrade (without service pack) to upgrade to windows Vista, windws XP always my programs work?
Can I install a Windows XP-based software after I upgraded to Windows Vista?
In addition to the answer given by Job Sam Varkey, you really should check with the manufacturers of software for your products that you are currently underway. You should also check with the manufacturers of equipment for the material you are using now to be sure, that those who are supported under Windows Vista. Do not trust any who/anything other than the actual software/hardware manufacturers so that there is full support under a new operating system for the said software/hardware or not.
In the end, honestly, I personally do not recommend an upgrade to Windows Vista on a computer running Windows XP. not due to material limitations (necessarily), but frankly I think that Windows 7 would be the best choice * if * you really need to upgrade, the longest supported right now and probably more stable. Others may (will) disagree.
What do you hope to take advantage of this upgrade of the operating system? Could you spend a little more and get a better system (material + new OS)?
Tags: Windows
Similar Questions
-
Can I upgrade to vista without deleting my xp programs and files?
upgrade
Can I upgrade to vista without deleting my xp programs and files? I don't want to lose my programs/files downloaded, but I don't want to argue with remove them and reinstall later
Yes, you can perform an upgrade "On the spot" and all your personal data and software applications will be available in Vista (provided that they are compatible Vista).
As always, you should create a backup Image in XP before you begin the upgrade, just in case. Also check that you still have your XP product key. If this isn't the case, then use one of the below product key finders.
Also: http://windows.microsoft.com/en-US/windows-vista/Upgrading-from-Windows-XP-to-Windows-Vista
-The key finder software product-
Here are some utilities, which will display your product keys:
Belarc Advisor: http://www.belarc.com/free_download.html
(He did a good job of providing a wealth of information.)Also: http://www.magicaljellybean.com/keyfinder.shtml
and: http://www.nirsoft.net/utils/product_cd_key_viewer.htmlNote: Also check the side of your PC case or at the bottom of the laptop for the
Key OEM code. If there is a sticker with the code, it will probably not
corresponds to what is displayed by the utilities mentioned above as OEM such as
Dell use an internal key code when they build your PC.The key on the sticker code should be used with your Windows CD
(who came if everything goes well with your PC) If you need to reinstall Windows.--------------------------------- Image Backup Software ---------------------------------------------
Acronis True Image 2011 - has a fully functional trial version of 30 days available.
(Note: install Acronis and then create a bootable media restoration/rescue CD before you start creating your first image backup)
http://www.Acronis.com/homecomputing/products/TrueImage/
The version comparison: http://www.acronis.com/homecomputing/products/trueimage/comparison.html
True Image User Guides and documentation:
http://www.Acronis.com/homecomputing/download/docs/Free alternative:
EASEUS Todo Backup home V2
(Note: Todo Install, then create a diskette "emergency" before you start creating your first image backup)
http://www.TODO-backup.com/J W Stuart: http://www.pagestart.com
-
The upgrade of Windows will affect the following programs or devices I (need help)
The upgrade of Windows will affect the following programs or devices:
These devices may not work properly after the upgrade. Before the upgrade, we recommend that you update the drivers for those devices. Cancel the upgrade, open the control panel and search for "update device drivers" or go to the website of the manufacturer of the device to search for updated drivers.- Keyboard filter
I want to know how to uninstall it. And
where I can get this update for the device.
I have 1215ee DV6
Product no. - NZ341EA
Please provide the right solution.
Launch Control Panel, in the section "Programs" click "Uninstall program. Select 'HP Quick Launch Buttons' in the list, and then click the uninstall
-
Question
better privacy does not work with windows vista home Premium that another program removes LSO and HOW to prevent the trackers? Edit
DetailsIn current versions of Flash you can also do this via the control panel.
- Control Panel > Flash Player, click on remove and erase data
-
I changed just jpg extension and tried to open in Photo Viewer, but he says that he has no support for this file. Any thoughts of a solution?
Hello
I suggest that you try to open the same pictures using Windows photo manager and see if that helps.
Right-click on a jpeg photo and try open Manager of picture Windows or Windows live photo gallery.
Keep us updated with the results once you try the steps above.
-
I have seen many other people having this problem, but none of the soultions has solved the problem.
After the upgrade to Win 7 Vista Business company. a number of my programs will not work. a mistake
"The application failed to start because its side-by-side configuration is incorrect."
train the Viewer even I get this
Activation context generation failed for "C:\Program Files\AutoCAD 2010\acad.exe". Load Assembly Microsoft.VC90.MFC, processorArchitecture = "x 86" publicKeyToken = "1fc8b3b9a1e18e3b", type = "win32", version = "9.0.21022.8" was not found. Please use sxstrace.exe for detailed diagnosis.
I tried to uninstall completely all Autodeck and re install but that has not worked.
Install the Visual C ++ 2008 Runtime.
Package redistributable Microsoft Visual C++ 2008 (x 86)
"A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/
-
the upgrade from VISTA to WINDOWS8 - BACKUP.1 does not WORK
UNTIL I NEW COMPUTER RUNNING WINDOW8 I MADE A BACKUP OF THE USB STICK 32 OF MY FILES ON THE VISTA MACHINE.
WHEN I TRY TO RUN PROGRAM BACKUP.1 IS BLOWS UPWARD LOOKING FOR 'MSVCP71. DLL? I LIKE THEM I'M THE ONLY ONENO ONE IN THE WORLD, WHO ATTEMPTED TO RESTORE THE SAVED ON THE VISTA FILES AND YOU WANT TO COPY TO WINDOWS8?Hello - for those who have a computer HP Vista MS, they provide a backup system that creates an .exe file called guess what? 'backup.1.exe' and a file 'backup2.fbw '. Try to use google next time and look it up!
Maybe you can Google to find an answer. When was the last time you could make a backup of an any other operating system and restore it on a newer version? Once you get this answer let us know.Guess what this backup is for HP computers running Windows Vista only! Maybe if you understand how works the backup program you wouldn't be so rough for those of us who are trying to help. But since you've already made your decision, you can Google how to do. Sure that no one here will help you now. Maybe HP will... for a price. -
Windows Vista will not install a program without wanting a disc.
I try to install a program on my laptop windows says to insert a disc that comes with it, but not everything has a disc so I say search online and it does not find anything. the only things I have problems with things like my Ipod, my external hard drive and my mouse, please help.
For the iPod, you must download and install the iTunes software. For other devices, you will need to find and download the drivers from the manufacturer - if the keyboard and mouse came from Logitech for example, download the drivers from Logitech.
writing in the new message: * e-mail address is removed from the privacy... * I try to install a program on my laptop windows says to insert a disc that comes with it, but not everything has a disc so I say search online and it does not find anything. the only things I have problems with things like my Ipod, my external hard drive and my mouse, please help.
-
OK - I'm out of here.
I've owned a Laserjet 100 color MFP M175nw for awhile, and it worked perfectly.
Installed the software for 2 computers at home and everything worked well.
Last week, I changed the password to my router for the home network.
The printer showed as "offline". I couldn't change the status.
After much trying I totally uninstalled the software, deleted the printers on my PC and reinstalled.
I run the installer - tell him I want to go and so that it can detect my wireless network settings. (I also tried the option where I have to enter the information manually). All else fails.
Setup starts and then asks me to install the USB cable. I do that and the installation program is going very slowly (I mean it crawls along) and wrote "Product has been detected", "Waiting for installation of the product at the end. Then I get a big red 'X' and it is said that it took too long to run and a fatal error occurrred or he tells me that it cannot find a product to install. If I run the installer and say USB only, it works very well. Ugh.
When I press the button on the front panel wireless and it flashes only and that's all.
Here's what I did - full power / turn off the PC and the router. Updated the firmware of the printer used the new installer (all from the HP website). Tried it on 2 different PC to ensure that it was not isolated.
The USB cable is good because after the failure, I can print via USB (I lost a forest to print the test pages). Same PC and OS for both when I bought the printer.
Ironically, I spent several years in this DOCUMENT, so it's not familiar works for me, just very frustrating!
Well, I finally had it - realized that the WIFI adapter on the PC had to have the new password entered.
It was step 1. Step 2 followed another post where I attached the printer directly via ethernet to the router cable, and once the IP address appears in the menu of the printer, I entered on my browser and the name of the router is entered, pw and managed to turn off the wireless printer on. Then, by running the installer worked like a charm. Woo-Hoo
-
Tecra M7: Upgrading to Vista SP1 of XP - what drivers/utilities to use?
I'm installing from a DVD of MS Vista with SP1 included. Then, direct upgrade to Vista SP1. Vista is in and everything seems to work fine, except the screen rotation and probably a few specific applications, I've not yet tried.
Toshiba offers a set of drivers and utilities for upgrades from Vista. Some of them are for 2006 and 2007.
I think that if everything works well, why rock the boat?
So I'm looking to install only the drivers and utilities that Vista does not already cover. Minimum play.
Has anyone tried this before? Any informed guesses?
Toshiba recommendations are included at the end of this pdf Vista upgrade: [Vista Upgrade Link | http://www.csd.toshiba.com/cgi-bin/tais/su/su_sc_dtlViewDL.jsp?soid=1715396&moid=1364134&rpn= PTM70U&BV_SessionID=@@@0821127523.1220637683@@@& BV_EngineID = ccccadefdidkeeecgfkceghdgngdgnj.0 & ct = D L & all_docs = false]
There was an issue witht sp1 driver Intel wireless. I'll make this one to include.
And thank you!
John
Hello
> I think if everything works well, why rock the boat?
I agree with you that I would install only the drivers that are really needed.In my opinion, you need:
Display driver
Flash Media Driver
Audio driver
Touch Pad Driver
Value Added Package
LAN and WLan driverIn my opinion, these applications are recommended
Other software like driver Config Free, Bluetooth, Fingerprint Software, etc. are not neccessry for me because I don't use it every day or every time -
I have a laptop HP under Vista Home Premium SP1. I have always used WMP to burn a mix CD. My laptop suddenly stopped burning CDs. It's weird, though; When I burn the songs, he says 'Analyze' and then 'writes the files on disk' and all that. No error message is displayed. The disc is ejected, but when I go to play the computer or a CD player, nothing appears on the disc; It shows up as "blank disc". I reinstalled Windows and updated the system entirely, but he is yet to burn CDs. My drive is not broken; It reads the CD very well and when I go to burn a CD with 1 or 2 songs on that, they burn very well. Only when I burn a CD with songs from 10 or 15 CD does not work. I have a Pioneer DVD RW drive. Thanks for any help you can give me.
Hello nosushi4you,
Thank you for visiting the website of Microsoft Windows Vista Community. The question you posted seems to be hardware related. Unfortunately, we are unable to help with changes to the hardware. Please contact the manufacturer for assistance.
Try following the steps:
System restore points are created automatically when the following occur:
- When you install a new application or driver.
- When you uninstall or install some programs.
- When you install new updates
- Automatically on a daily interval
- Manually by creating a.
- If you choose to use system restore to restore to a previous restore point, System Restore creates a new restore point before you restore a previous state in case something goes wrong. If you are restoring to a previous state in Mode without failure, a restore point will create for the current state.
So that the restoration of the system to work, you must have 300 MB of free space for each hard disk that monitors the system restore. System Restore will also use up to 15% of disk space on each disk that it monitors. That hard disk space runs out, older restore points will be deleted as newer ones. It is also important to note that you must be logged in as an administrator in order to use the system restore. Now that you understand the basics of the system restore, you must continue to the next section to learn how to use it.
Restore Windows Vista to a previous state
In the case of a problem on your computer that cannot be solved by normal means, you can restore your computer to a previous working state. To do this, you need to start restoring the system so that you can choose the restore point to restore. If you currently have Windows Vista boot problems, you can use the system restore in Windows recovery environment. Instructions on how to do it in this tutorial can be found: System Restore using the Windows Vista recovery environment.
If you can connect to Windows Vista, you must follow these steps.
- Close and save any documents that you have opened.
- Click the Start button to open your Start Menu. The Start button looks like this:
- When the Start Menu open click on the menu option all programs.
- Click once on the Start Menu Accessories group.
- Click once on the System Tools Start Menu group.
- Click once on the icon of the system restore. After you click the icon, if a user account control window opens, click on the button continue.
You will now be on the screen as shown below in Figure 1 system restore. From this screen, you can specify the restore point that you want to restore.
1 screen of system restore
By default, Vista will be already selected the restore recommended option. This restore point is one followed a new pilot program, or update has been installed. If you do not want to use this restore point, you can click on the button next to start the restore process. On the other hand, if there is a more recent restore point that you want to restore you should select choose a different restore point and press the next button. This will bring you to a screen, as shown in Figure 2, which contains a list of all available restore points that you can restore.
2. the list of available restore points
You must select the restore point that you want to restore, and then press the button next to start the restore process. Vista will display a window showing your selected restore point and asking you to confirm that it is that you want to restore.
3. confirm the selected restore point
If you want to select a different restore point, press the Back button. Otherwise, you can press the Cancel button to exit the system restore or the button finish to begin the restore process. If you have selected finish, Vista will display a second prompt asking you to confirm that you want to continue restoring.
4. second Confirmation
If you are sure you want to restore, then press the Yes button. Vista will now log you off the computer and start the system restore process, as shown in Figure 5 below.
5. restoration of a restore point
When the restore is complete, your computer will be restarted and when Vista starts it backup will be restored to its previous state. When you open a Vista session for the first time after the restore, you will see a message indicating that the restore was successful.
6. system restore was successful
If there are problems with your computer because the last restoration, you can return to your previous settings to ebb in the system restore utility and select Undo system restore by pressing the next button.
7 undo the last system restore
Your computer should now work correctly again.
With the help of the restoration of the system in the Windows recovery environment
Manual creation of Restore Points
As mentioned previously, it is also possible to create manual restore depending on points. Some popular designs to create manual restore points are when you have your computer configured perfectly and I would save the State in case of problems in the future. To create a manual restore point, you must follow these steps:
- Click the Start button to open your Start Menu. The Start button looks like this:
- Click on the control panel menu option.
- Click the option menu system and Maintenance.
- Click on the system menu option.
- Click on the System Protection in the list on the left.
You will now be at the System Protection tab in the system control panel. This tab allows you to enable and disable the system restore as well as making the new manual restore points.
8. the System Protection tab
To create a manual restore point, you must click on the button create. When you press this button a prompt asking you to give a title to this manual restore point.
9. Enter the manual restore point title
Type a title for the manual restore point and press the button create. Vista will now create a restore point manually and once finished, post a notice that it was created successfully.
10. Manual restore point has been created
Now that you have finished doing the manual restore point, you can close the system window.
This should solve your problem.
Let us know if these steps solve your problem. I hope the information is useful.
Kind regards
Anthony
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
the upgrade to vista 64-bit for windows 7 64 bit.
I recently bought a pack of conversion from microsoft for windows 7 64 bit.
It downloaded as files from the BOX and im extremely frustrated, I can't do anything with these files. I assumed it would be a simple download and upgrade to vista 64-bit for windows 7 64 bit and have tried everything available to me.
Please help someone
You can download the .iso file correct 64-bit instead:
The format of the box is the old version. -
My Windows Vista allow not even put it in my contract. I raised this issue with Microsoft here: http://answers.microsoft.com/en-us/windows/forum/windows_vista-windows_update/windows-authorization-failed/1eb76641-c316-4cee-b9f2-07822b2ca07d?page=1&tm=1331999060993#footer but have not yet followed the suggestions of the last answer. My windows is unauthorized. But with many errors that occur on the computer, some hardware (RAM) and other software, I thought that it would be better to simply upgrade to Windows 7. But before I'm ready to do a permanent upgrade, I need to know if a version of Windows Vista will be able to upgrade to Windows 7. A licensed version of Windows Vista was purchased by us, and a licensed version of Windows 7 will be bought when you're ready to upgrade. Is this possible? Or Windows Vista must first be authenticated?
EDIT: upgrade is also done if all goes well to avoid having to go through the whole process to fix my problem with windows authentication as described in the last post on the link above.Hello
You must set your original problem.
Please meet Christmas Paton and PA bear.
You need a legal active Vista operating system update since.
See you soon.
-
Upgrade in an incorrect language window
I am trying to upgrade Windows Vista Home Premium. When I click on the UPGRADE button then it will display a window in Turkish. I need the window in English. Can you please help?
Thank you!!
Hello
- You bought a Turkish version of upgrade CD?
- How you are trying to upgrade? (To CD using, every time that the update)
- What version you are trying to upgrade? Is - this Windows 7?
Make sure you have the operating system to install a correct language.
You can visit these links and check:
http://Windows.Microsoft.com/en-us/Windows-Vista/products/anytime-upgrade
http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-get-additional-language-files
Response so that we can better help you.
-
Microsoft told me I can improve my Vista Home Premium to the Enterprise version of Windows7, but it will be a "clean install" (install uninstall complete.). Should I wait for problems if my computer will not upgrade to Vista Service Pack 2? (I tried all kinds of solutions Microsoft FixIt and Disc Check).
Hello
1 have. what troubleshooting measures you tried?
2. do you get any error code or error message by updating to service pack 2?
If you can not upgrade to Service Pack 2 for Vista which should not cause concerns to a clean install of Windows 7 and you should be able to do well.
I suggest that you run Upgrade Advisor before you start the installation of Windows 7.
Windows 7 Upgrade Advisor:
http://Windows.Microsoft.com/en-us/Windows/downloads/Upgrade-Advisor
And also bring to the top of the data before you start the installation of Windows.
Back up your files: http://windows.microsoft.com/en-US/windows-vista/Back-up-your-files
For more information, see the following Microsoft.
http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-and-restore-frequently-asked-questions
http://Windows.Microsoft.com/en-us/Windows7/installing-and-reinstalling-Windows-7
Hope the information is useful.
Maybe you are looking for
-
Using W7 Ultimate + SP1.21 of Firefox Drowning is not installed even though I have been informed that after Firefox restart it will be installed.Advice please? Thank youColin
-
Factory reset after re-installation of windows with a different key
Hi all I bought a laptop HP dv7-7264ez, with 8 pre-installed windows ENVY. After installing linux and messed with the boot settings, I need to re - install windows. Because I had not burned an iso of Windows 8 or extracted from my windows product key
-
SHAREit worked before, but since the last update of what YOGA can not find every laptop
Hello I used SHAREit twice with good results (may 2015) I tried to use it in early August and earlier, n the YOGA 2 1380 pro cannot find the laptop more although they are 20 cm from each other. Version of Windows is different from Android. I already
-
'Create page vew' in another document, both documents are open
In Adobe Acrobat 9 Pro, I want to create a link in the document 1 page view display a passage in 2, but after I created the link to the page, when you click on closing the document 1 link (the same thing happens in 10 Pro).This does not happen when I
-
How can I add my subscription to this computer rather than my other?