If the output of multiple string string

Similar Questions

• I want to activate the outputs audio multiples to be active, so I don't have to wear my helmet all the time, or need to disconnect anything to the speakers.

  Pretty simple question really. I want to activate the outputs audio multiples to be active, so I don't have to wear my helmet all the time, or need to disconnect anything to the speakers. I checked the 'sound' thing in the Control Panel, but the enable option is not letting actually work. So if I want friends to hear my video games or something else, I turn on my speakers and they can hear it now.

  Thank you.
  Windows 7, 64 bit.

  Audio original tittle: multiple

  Windows does not support this. This is handled by the device drivers or hardware - if they don't support the outputs multiple, you can try the search for an alternative solution.

• Try to restore the output audio multiples

  Hello, just joined the community of Windows 7.  Installed the RC.  Having some sound issues.  I was already a Windows XP user and the sound automatically went out to several devices, such as speakers and headphones.  I now find in windows 7, its fate only to the device "by default".  How can I change this so audio output goes to several devices again.

  In addition, just in case this is related.  My system has the front and back of the microphone inputs.  I had always used the front microphone jack.  Right now, my system is only says he uses the rear Mic Jack.  I tried to in the spirit of taking precedence no chance.  No big deal, except that it's really bugging me that I can't do this.  Check the Bios and have played around with the system devices.

  Note that my current config has the output of the speaker to the rear, headset and microphone from the front.

  You can expect that the speakers, microphone and headphones work 'PlugNPlay' that you insert the plug. Mixer devices appear as the sounds occur. The first problem can be linked to the second and separate speaker/headphone may be a problem with your audio driver, but I expect to find a settting in the tab "speakers' Panel of------Sound control to determine single or double performance for audio output. The microphone records don't step forward is unlikely to be a problem with audio driver. If its edge, the chipset drivers will do. I would like to download the latest driver chipset on the desktop, and right click to "troubleshoot compatibility" and try the Vista Mode. Approach of Oct 22 GA version, I think you can see new drivers showing, probably on Windows Update.

  Messages rating helps other users

  Mark L. Ferguson MS - MVP

• JavaScript to display the output if multiple check boxes are selected

  Hello

  My PDF form has a number of questions about this, some of which are multiselect.

  for example

  Identify the colors of our company logo (there are three)

  Blue

  Red

  Green

  Orange

  Yellow

  Purple

  If they choose the good ones (blue, red and yellow), the script should display a 'Correct' output, if they look for something else, it should show incorrect. I have worked out how to do it for a collection of radio button, but may not know of check boxes.

  Any help would be greatly appreciated.

  Concerning

  I don't know, but see if it works for you: http://acroscript.net/pdf/demos/Adobe_Forums_1993380.pdf

• interpretation of TCP read the output string

  What is the right method to interpret the data from the TCP Read function? The output is a string of characters, which are obviously not hexadecimal values. How can I convert the string to a binary table or bytes?

  OK, time wild guess...

  The first four bytes are an indication for SYNCHRONIZATION

  The four bytes 0 4 0 0 is a 32-bit integer, GIS bytes less first. 1024

  Then you have 6 0 0 0, which could be another 32-bit integer, lsb first. 6

  Then your random data

  Rod.

• using the same indicator of string in different stacked sequences

  Hi guys, I want to use the same string in different sequences stacked indicator. I tried to plug the output of each string constant through the sequence on my indicator chain outside the block in the sequence, but then I get an error "wire connected to a tunnel not channeled. What is the best way to use the same indicator for all sequences?

  Hi JoVMo,

  You can just use a local Variable of this indicator within the sequence...

  

  Kind regards

  Nitz...

  (Kudos are always welcome)

• VISA read lose characters beyond the end of the output string

  Hello

  I wrote a VI to take a string of output data of an ardunio Uno and analysand. I use the vi read Visa to enter the output channel of the unit. In the end I will connect a device that actually gives the value in this type of format string: (#80212164,2289,2292,2296,2300,2328,2289,2297,2290,2300,2308,2292,2295,2298,2289,22,24,0 *).

  So after a large number of loops, the program starts to drop the last characters of the string that it generates. If the string of Visa Read output reads something like (#80212164,2289,2292,2296,2300,2328,2289,2297,2290,2300,2308,2292,2295,2298,2289,22,24,). The only way to solve this problem, once it has occurred must completely close labview (completely). Once I open again and start the program running, all is well in the world.

  Has anyone had this problem? I tried to debug it in different ways and the only weird symptom I have other Visa Read function lose a few characters of the string is the fact that by looking at the bytes to the Port after I read visa, is that she starts showing five bytes instead of zero.

  my last attempt at resolving this issue is attached.

  Note: The Ardunio outputs a string of this format every 2 seconds with the values being incrimental on a specified range. (80212164,2289,2292,2296,2300,2328,2289,2297,2290,2300,2308,2292,2295,2298,2289,22,24,0 # *)

  You can configure the * your character of termination if your Arduino does not send the carriage return or line feed.  Use the configure a Serial Port to ensure that your settings are correct.  You can also use this VI to increase your timeout so that you no longer need your waiting.

• Display the test using the output "string" indicator?

  Hi, I'm trying out the test to the indicator of string data as you can see below,

  but with 'For' the logic of loop that it is only the display last number, so if you run this, you'll see

  following output.

  Test #6

  If I move the concatenation of string outside of the loop block, you will see the result as below.

  Test #0123456

  However, I want to achieve more of output. Can someone suggest me a way to do it?

  By the way, I use the for loop.

  The output I want to display with the for loop

  Test #0

  1

  2

  3

  4

  5

  6

  Thank you

  

  Close but no cigar.

  You need concatenate the string using a shift register.

  

  This will be the output:

  

• Is there a function to adjust the length of a string to 8 multiple bytes?

  Hello

  I have a function to encrypt a password.

  FUNCTION encodeit (p_name IN VARCHAR2, p_password IN VARCHAR2) RETURN VARCHAR2
     IS
        l_password   VARCHAR2 (4000);
        l_salt       VARCHAR2 (4000) := 'hdjikndbbhitasuihfnnkqyhiplwmneuyndnloidj';
     BEGIN
        l_password :=
           UTL_RAW.cast_to_raw (
              DBMS_OBFUSCATION_TOOLKIT.md5 (
                 input_string => p_password ||
                                 SUBSTR (l_salt, 10, 13)||
                                 LOWER (p_name)||
                                 SUBSTR (l_salt, 4, 10)));
        RETURN l_password;
     END;
  

  I want to decrypt the password to send to users when they forget it.  I wrote this function:

  FUNCTION decodeit (p_name IN VARCHAR2, p_password in VARCHAR2) RETURN VARCHAR2 IS
      l_salt       VARCHAR2 (4000) := 'hdjikndbbhitasuihfnnkqyhiplwmneuyndnloidj';
      BEGIN
        RETURN DBMS_OBFUSCATION_TOOLKIT.desdecrypt(input_string =>  p_password ||
                                                                    SUBSTR (l_salt, 10, 13)||
                                                                    LOWER (p_name)||
                                                                    SUBSTR (l_salt, 4, 10),
                                                   key_string   => l_salt) ;
      END;
  

  The problem is that the DBMS_OBFUSCATION_TOOLKIT.desdecrypt function needs a multiple of the input string of 8 bytes. And p_name and p_password are not of fixed length. Is there a function to adjust the length of a string to 8 multiple bytes?

  Best regards.

  They used to work - could be almost ten years (I think version 9 - not tested yet)

  As you can see, you can 'encode' the number of characters, padded in order to set the right length of the decrypted string

  
  

  create or replace FUNCTION ' CRYPTIN "(p_str in varchar2) return varchar2 as". "

  l_data VARCHAR2 (255);

  function pad_DES (p_string in varchar2) return varchar2 is

  -platelets p_string with pad_chr containing the number of characters padded (1 to 8)

  -make the string length a multiple of 8 as required by decipher

  pad_length pls_integer;

  pad_char char: = chr (0);

  pad_chars varchar2 (8);

  Start

  pad_length: = 8 - mod (length (p_string), 8);

  pad_chars: = chr (pad_length);

  Return concat (p_string, rpad (pad_chars, pad_length, pad_chars));

  end;

  Start

  l_data: = pad_DES (p_str);

  dbms_obfuscation_toolkit. Decrypt (input_string-online l_data, key_string => 'MagicKey' encrypted_string-online l_data);

  return UTL_RAW. CAST_TO_RAW (l_data);

  end;

  create or replace FUNCTION ' CRYPTOUT "(p_str in varchar2) return varchar2 as". "

  l_data VARCHAR2 (255);

  function unpad_DES (p_string in varchar2) return varchar2 is

  -Removes from p_string upholstered characters (1 to 8)

  pad_length pls_integer;

  Start

  pad_length: = length (p_string);

  pad_length: = pad_length - ascii (substr(p_string,pad_length,1));

  Return substr(p_string,1,pad_length);

  end;

  Start

  l_data: = p_str;

  dbms_obfuscation_toolkit. DESDecrypt (input_string-online l_data, key_string => 'MagicKey', decrypted_string-online l_data);

  Return unpad_DES (l_data);

  end;

  Concerning

  Etbin

• delete the consecutive occurrence of string

  version: Oracle Database 11 g Enterprise Edition Release 11.2.0.3.0 - 64 bit Production
  
  Hi I want to do, remove the consecutive occurrence of string
  
  

  Example I/P: 'POWELL POWELL BRIAN K AND BONNIE POWELL JARRELL JARRELL'
  to O/P : 'POWELL BRIAN K AND BONNIE POWELL JARRELL'

  I tried the code below works fine, but I wanted to do this by using the Regexp or any other method better

  WITH T
         AS (    SELECT   LEVEL RN,
                          REGEXP_SUBSTR (
                             'POWELL POWELL BRIAN K AND BONNIE POWELL JARRELL JARRELL',
                             '[^ ]+',
                             1,
                             LEVEL
                          )
                             NAME
                   FROM   DUAL
             CONNECT BY   LEVEL <=
                             LENGTH(REGEXP_REPLACE (
                                       'POWELL POWELL BRIAN K AND BONNIE POWELL JARRELL JARRELL',
                                       '[^[:space:][:punct:]]*'
                                    ))
                             + 1)
  SELECT   LISTAGG (NAME, ' ') WITHIN GROUP (ORDER BY Rn) AS name
    FROM   (SELECT   RN, NAME, LEAD (NAME, 1, 0) OVER (ORDER BY RN) Lead_name
              FROM   T)
   WHERE   name != lead_name;
   

  Hello

  1006112 wrote:
  Hello
  The solution does not work for this channel.

  SELECT REGEXP_REPLACE ('ZHOU JIANCHUAN AND ESTABROOK- ZHOU DESIREE ','([^ ]+)( \1)+', '\1') Word1,
  regexp_replace('ZHOU JIANCHUAN AND ESTABROOK- ZHOU DESIREE', '(\w+)(\W+\1)+', '\1')Word1,
  regexp_replace('ZHOU JIANCHUAN AND ESTABROOK- ZHOU DESIREE', '(\w+\W+)\1+', '\1')Word3
  from dual ;
  
  SELECT REGEXP_REPLACE ('STATTELMAN J J JR AND MARGAR ','([^ ]+)( \1)+', '\1') Word1,
  regexp_replace('STATTELMAN J J JR AND MARGAR', '(\w+)(\W+\1)+', '\1')Word1,
  regexp_replace('STATTELMAN J J JR AND MARGAR', '(\w+\W+)\1+', '\1')Word3
  from dual  
  

  Your original solution looking better all the time! This problem is more complicated than I thought.
  It is probably more effective than CONNECT BY:

  SELECT    TRIM ( REGEXP_REPLACE ( REGEXP_REPLACE ( ' ' || REPLACE ( str
                                                               , ' '
                                            , '  '
                                            )
                                       || ' '
                                        , ' ([^ ]+)( +\1)+ '
                                  , ' \1'
                                 )
                      , ' +'
                      , ' '
                       )
              )     AS no_consecutive_dups
  FROM      table_x
  ORDER BY  str
  ;
  

  I tested it using this table:

  CREATE TABLE  table_x
  (   str     VARCHAR2 (80)
  );
  
  INSERT INTO  table_x (str) VALUES ('POWELL    POWELL BRIAN K AND BONNIE POWELL JARRELL JARRELL');
  INSERT INTO  table_x (str) VALUES ('ZHOU JIANCHUAN AND ESTABROOK- ZHOU DESIREE ');
  INSERT INTO  table_x (str) VALUES ('STATTELMAN J J JR AND MARGAR');
  INSERT INTO  table_x (str) VALUES ('DO DO SOL SOL LA LA SOL');
  

  Output:

  NO_CONSECUTIVE_DUPS
  --------------------------------------------------------------------------------
  DO SOL LA SOL
  POWELL BRIAN K AND BONNIE POWELL JARRELL
  STATTELMAN J JR AND MARGAR
  ZHOU JIANCHUAN AND ESTABROOK- ZHOU DESIREE
  

  It compresses the spaces; in other words, the original str can contain multiple consecutive spaces or spaces main and/or end, but the output will not.
  Here's how it works:
  The REGEXP_REPLACE at the heart of this solution search a sequence that begins and ends with a space. otherwise, he'll be fooled by things like "J J JR", where the "J" in "JR" could be confused with a 3rd 'J '. However, this means that a single space between two recurring motifs in 'DO DO GROUND GROUND' can only mark the end of "DOING" pattern or the Spiderbeam of the 'GROUND FLOOR' trend, but not both. The above query that bypasses by replacing all the spaces with 2 spaces, so space may mark the end of 'DOING' and the other may mark the beginning of "GROUND FLOOR".

• Sub - VI with the entry as a string og number

  At this small Subvi. I wonder if I could make it more flexible and be able to take the string and number as a value ('value dbl' market) entry.  Is there some sort of variable of variant type that could be used?

  

  Michael.Koppelgaard wrote:

  At this small Subvi. I wonder if I could make it more flexible and be able to take the string and number as a value ('value dbl' market) entry.  Is there some sort of variable of variant type that could be used?

  It is possible with the key to write OpenG (varying) _ogtk.vi. But the problem is that when you want to read this back, you need to know what type it is. If you write to a different section of the config file each with a specific type, the TI will work. With this solution, you must use the key to reading OpenG (varying) _ogtk.vi to read and convert the value to LV

  Another way is to use Get Type Information.vi of the Variant Data Type palette. The trick here is to convert double or string before saving it in the config file (wire structure dealing with the output type of the vi and do conversions in the case of type dbl and string). Here, too, you must use a different section, one for dbl for string. Here, you use the standard Read button live file configutaion palette.

  Ben64

• The search for exact strings (and the right formula)

  I am using FIND instruction to search multiple strings in a larger formula. The original formula that I do stand out is the following:

  = IF (ISNUMBER (FIND ('INC', A1)),' ', 'Y')

  Of course, this gives a Y if he finds some text in "". "" However, I have several channels for which I would check, and they need to be exact. That is to say when I search Inc. and Inc., I don't want Inc. to be counted. So, I tried the following formulas.

  = IF (ISNUMBER (FIND (OR("INC",inc"), A1)),' ', 'Y')

  = IF (SUM (COUNTIF (A1, "* INC. *","{* Inc. *}")),' ',' Y')

  The second works better, but it also counts Inc. as a football game. Any suggestions?

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• Advice on the use of APEX_JSON with a CLOB in the body as a string

  Hello all and thanks for any help in advance.

  I have the task of liaising with a 3rd party API via JSON to send information to our database.  First warning is the HOST for us is not and race so I have no way of properly this test until tomorrow, but I wanted to ask this question to try to overcome a potential problem.

  In the body of the JSON object, we must add a chunk of xml (already created/kept or can be created on the fly) and it must be validated on as a long string.  Now, this question is that the string can be up to 20000 characters long so when its processed is stored as a CLOB in the database (not made by me).

  Now my thoughts early to do this was to create a procedure allowing certain parameters get the relevant piece of data and xml stored as a CLOB.  Then and that's where I maybe need some tips, follow these steps.

  This host requires JSON in this format

  {

  'batchcode': 1234562,

  'XML string': 'THIS WILL BE a MASSIVE XML STRING',

  ""bounding ":" ",".

  "ID": "123456465",

  'field1 ':

  .

  .

  etc.

  }

  We currently have a few apex applications so I got a good look at the documentation and allows to generate the required using JSON:

  Thus to collect information of input parameters

  APEX_JSON. INITIALIZE_CLOB_OUTPUT;

  APEX_JSON. OPEN_OBJECT();

  APEX_JSON. WRITE ("batchcode," value from database");

  APEX_JSON. WRITE ("XML string ', our xml database that is stored as a CLOB string");

  APEX_JSON. WRITE (bounding "," value of database");

  APEX_JSON. WRITE ('ID', 'Value of database');

  .

  .

  .

  etc.

  APEX_JSON. CLOSE_OBJECT();

  Then validate using endpoint:

  APEX_WEB_SERVICE. () MAKE_REST_REQUEST

  p_url = > 'URL of the end point. "

  p_http_method = > 'MESSAGE ',.

  p_username = > API_USER,

  p_password = > API_KEY,.

  p_body = > apex_json.get_clob_output

  );

  Now assuming that my method is correct only the APEX_JSON. WRITING literally accept its entry as a type CLOB and he will be able to properly analyze or will it arrive at a mansion that will actually write the string itself?

  Edit I found that if I APEX_JSON. WRITE ("XML", "CLOB table column") that it exported the CLOB but not in the format I want.  This is due to the fact that my CLOB has characters like <>etc in II and the output is burning out in unicode, so for example <? XML version = "1.0" encoding = "UTF-8"? "> as stored in the object CLOB becomes \u003C?xml version=\"1.0\ ' encoding =------"UTF - 8\ '? \u003E\n in the output using APEX_JSON. To write.

  The only other way to do it, I think it is so divided in pieces as follows:

  SELECT ROWNUM as XML_PIECE_NO, TO_CHAR (SUBSTR (a.xmldoc, (ROWNUM-1) * 4000, 4000)) AS SECTION

  Of ast_xmldata one

  CONNECT (ROWNUM-1) * 4000 < = LENGTH (a.xmldoc)

  Then maybe concat in the JSON long xml string field.

  I hope I have explained what I want to do but if not please respond any help will be greatly appreciated.

  Concerning

  Post edited by: K4E

  EDIT I CAME FROM WITH a SOLUTION

  Post edited by: K4E - found solution 02/04/2016

  Thanks for the response of Christian, logical exit that way.

  Through some trial and error, I found a solution to my problem that seems effective enough without having to worry about unicode characters written.  There is seemingly a procedure without papers in the APEX_JSON package called apex_json.write_raw that does what it says.  All I had to do then was to use escape characters in my CLOB for things like "then I get a few good valid JSON in the format of the API, I work with love."

  Hope this helps someone else with the situation.

  K4E

• get the length of each string in a column

  Hi all

  Is there a way to get the length of each string in a column:

  for example:

  If the table contains lines like below:

  Select 'test test1 test31' col1 of double

  Union of all the

  Select 'sectest1 sectest234' double col1

  The output should be as below:

  col1

  ------------

  4 5 6

  8 10

  That is to say get the count of each separated from the chain of space in a column. Is this possible using regexpr_substr?

  Thanks in advance.

  Roy.

  Try the below

  SELECT LISTAGG(val1,' ') IN ONE GROUP)

  New_val ORDER BY lvl)

  Of

  (SELECT LENGTH (REGEXP_SUBSTR (col1,'[^] +', 1, LEVEL)) val1,)

  RN,

  LEVEL lvl

  Of

  (SELECT col1,

  ROWNUM rn

  Of

  (SELECT 'test test1 test31' col1 OF double)

  UNION ALL

  SELECT 'sectest1 sectest234' double col1

  )

  )

  CONNECT BY LEVEL<= regexp_count(col1,'="">

  AND PRIOR rn = rn

  AND PRIOR DBMS_RANDOM. VALUE IS NOT NULL

  )

  GROUP BY rn;

  OUTPUT:-

  =======

  col1

  ----

  4 5 6

  8 10

  Thank you

  Ann

• Convert the object to a string

  Hey guys - I'm beating my head against the wall on this workflow I have been working on for a week and I was wondering if anyone can point me in the right direction.  Trying to figure out how to take the entry (VC:VirtualMachine) for an item in the workflow and convert it to a string (hostNameOrIP) to be used for the next item in the same workflow.

  Here's a bit of context:

  The global workflow is the copy of the file to the workflow comments followed by run a workflow of SSH in command.  The copy of the file to the comments using a parameter such as VC:VirtualMachine; However, I like to wear this VM name in the next part of the workflow but the command run SSH wants to format as a string.  It sounds stupidly simple, but I am challenging my brain on it.   Joined logic available to the workflow - I wonder if I need a scriptable between the workflow task two elements / nested that performs the conversion or is it possible to have the first nested workflow, the name as a string of output and then use an output for an entry?

  Yes, you need to set a variable.  It could be an output of your workflow or a script task, as you say somewhere in your workflow.  If your vm is named to match the host name, you can use something like vmName var = vm.name;  If you want to use the real host name or ip address, you must enter the vm.guest.hostName or vm.guest.ipAddress.