Unable to opena a port through Windows Firewall in Windows 7 Home Premium

Similar Questions

• How to open a port that is closed? Have Vista Home premium 64-bit

  I get this message when you try to get to oracle - OEM
  "Ip_address here" is not set up to establish a connection on port "5500" with this computer. The ip address is the address of the local host - all on a single pc.

  It was woprking then I changed my security/antivirus software and the port is closed.  I uninstalled the new software and the port is always closed.

  Hi Ames66,

  It happens more often because the firewall blocks the program and to allow that program to communicate through the firewall, you can usually do that by selecting the program on the Exceptions tab in Windows Firewall.

  If you have Windows Firewall on your computer, follow the steps in this link:

  Allow a program to communicate through Windows Firewall

  http://Windows.Microsoft.com/en-us/Windows-Vista/allow-a-program-to-communicate-through-Windows-Firewall

  Open a port in Windows Firewall

  http://Windows.Microsoft.com/en-us/Windows-Vista/open-a-port-in-Windows-Firewall

  If you use a third party firewall manually give exception to the program.

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Shredder64.msi installer, either deleted or defective & not available to open new software. Windows 7 Home Premium

  Since July, Shredder Windows Installer fails to open new software and gives the msg of error indicating the component you are trying to use is on a network resource that is unavailable. "Try again or search under different file or car, etc.  Very frustrating and annoying.

  I am running Windows 7 Home Premium and have sought to the old version, which I believe was back in June, before 2011

  Disposer installation program has been damaged deleted o.  I also tried to download for free, but no luck.  I downloaded "installation programs," which were inefficient and apparently do not serve the same purpose to open the software.    I would like to restore the system, but do not go back to 2011, which is year bought the laptop.

  Advice or assistance appreciated!

  JudyB_729

  You're welcome, Judy.

  At any time, if you encounter error messages when you try the steps, please take note of the full error message and let us know.

• Unable to start boot corrupted files Windows Vista Home premium

  Hello all recently I got my hands on an old Toshiba laptop Satellite I'm supposed to have attachment to a friend, however, she doesn't remember the password for the laptop so I searched for ways to circumvent the password and delete it however, I ran into a major problem, according to the wiki site , how you put in a family of Windows Vista installation disc premium, you select your country and all that say before you install is a repair of your computer, but I can't so I thought well maybe if I hit install that it will recognize that there are already Windows Vista on the computer however to my dismay that it did not so I canceled the installation but now the computer does not even boot into Vista at all he'll just do Startup Repair whenever whenever it starts "Windows loading files" I already tried several things the bootrec command using command prompt without success, I tried to restore the master boot record by using the command-line without success either, here are the details as seen from the Startup Repair tool: signature of the problem GREATER TOMBENT AUTO there is also one that says corrupt boot configuration data and who says fix partition table I look it up online that I mean who is the code which is the ID of locale 1033 I looked up the exact problem this forum and he said if there is the disconnect a USB connected the problem with that is there is no USB device connected. To clarify what I said earlier about wiki, how what I tried to do initially was put in the trunk of installation disk from the CD in the environment of the installation, then click on repair your computer so that I could use CMD to reset the password online, I have seen that you can change the keys to self-retaining pull up of CMD by modifying the ease of access button but I thought that it would be easier because I don't have to understand how to fix the ease of access button after I did. So now I am at a loss as to what I could do next to important things to note that this computer doesn't have system restore points stored on it so it is not an option if you do not understand something please let me know and thank you for your suggestions. PS I will try a disk check, now that I think of it.

  Hello all I was able to restore the computer back in working order without password, I did however have download and burn a copy of Vista Home premium at my discretion. But I use the product key legally reactivate Windows Vista Home premium but I have to say that the search for the driver for this laptop has not been easy, especially the pilot Wi - Fi that I had to go

  burn it to a disk, and then install the software in this way. I really don't know not how I got the display driver correct because I downloaded the driver two booster and then the next minute it was display driver just because I checked on the user manual on Toshiba.com and it was the correct an Intel 3000 graphics thank you all so much for your help and I hope this helps someone else :-)

• Unable to access drive c on Windows 7 Home Premium

  I can't access my c drive, it says NTFS. I know a lot of wats. I use genuine windows 7 Home premium.
  thnx.

  Hello MohiniPande,

  File system NTFS (New Technology) is a file system that supports the disk hard sizes up to 256 TB.

  NTFS is the file system main used in Microsoft Windows 7, Windows Vista, Windows XP, Windows 2000 and Windows NT operating systems.

  When you format your hard drive for Windows 7, it has been formatted with NTFS. It is normal that you see.

  However, you should access your C:\drive.
  Go to disk, right click and select Properties.
  Then go to the Security tab.
  You should see:
  Authenticated users
  System
  Directors

  You see your user name?

  Did you run the SFC/scannow as suggested Hula_Baloo?
  It found errors?

  Please answer back with an update on your question.

  Marilyn

• Cannot open Disk Defragmenter in Windows 7 Home Premium

  I can't defragment in my pc with Win7 Home Premium. Win7 defragment automatically, but sometimes I also want to defragment myself. Thank you.

  The drive Windows explorer, computer, C:\, right click, properties, tools, Defrag.

  Defrag is going in the background during idle time anyway.

• Impossible to open a port on Windows 7

  I have a mobile application that needs me to open the port 23424 on my system. I forward the port in my router and helped him. Then, I opened the port in the Windows Firewall. The app would not work. I put my system in DMZ, still no connection. I then unplugged the two firewalls, and again, I could not access the port.

  I checked on www.canyouseeme.org. and it reports "error: I could not see your service to the 76.xxx.xxx.xx on the port (23424) reason: Connection Refused" I then tried a new router, open port, the same thing. I can't understand what is blocking or refuses the connection. No matter what I do, something is obstacle in this regard.

  I have Time Warner cable and talked with them and we checked that their router is not active and acting as a bridge to my router. All other services are working properly, I can't just open this port.

  I use Windows 7 Home Premium, Microsoft Security Essentials antivirus software and a router Belkin N750.

  What Miss me? Thank you.

  You only need to run a firewall and not more than one firewall on your computer...

  PortQry message means that your problem probably is on the router, since you can connect with PortQry to this port from another PC on your LAN.

  I would check with the router manufacturers support site to help port forwarding...

• Why can't I open files nave through Windows Explorer 7

  I have the latest version of nikon view nx Windows 7 Home premium.  NEF files open through the view nx but I can not windows 7 to associate files with view nx so nave so cannot open files with nx view through Explorer.  He used to work in windows vista.

  Click right a NAVE in windows Explorer, and then open with. You may need to browse
  for NX. Select it, and then click the check mark to always use this program.
   
  On Friday, July 16, 2010 20:01:24 + 0000, dave61 wrote:
   
  > I have the latest version of nikon view nx Windows 7 Home premium.  NEF files open through the view nx but I can not windows 7 to associate files with view nx so nave so cannot open files with nx view through Explorer.  He used to work in windows vista.
   

  Barb Bowman

  http://www.digitalmediaphile.com

• Unable to activate Windows 7 Home Premium.

  OT: Activation problem.

  I am trying to activate Windows 7 Home Premium (it is a box, the retail copy) does not. I reinstalled Windows twice before and had no problems with the same product key. What can I do to activate it?

  Best regards

  More that likely the issue of activation is due to the fact that you previously (twice) installed and activated Windows. This time, Windows thinks that the key is used. Try to activate by phone.

  How to activate Windows 7 or Vista manually (activate by phone)
  http://support.Microsoft.com/kb/950929/en-us

  1) click Start and in the search for box type: slui.exe 4
  (2) press the ENTER"" key.
  (3) to select your "country" you are in the drop-down list.
  (4) choose the option "activate phone".
  (5) stay on the phone * do not select/press any option * and wait for a person to help you.
  (6) explain your problem clearly to the support person.
  (7) the person must give you a confirmation ID, copy it down on paper,
  (8) check that the ID is correct in reading the support person.
  (9) to enter the ID number, then click 'Next' to complete the activation process.

  Activation and registration of a Microsoft product
  http://support.Microsoft.com/?kbid=326851
  Windows activation: (888) 571-2048
  (888) 725-1047 or 800-936-5700

  What's the relationship between activation and genuine Windows?
  http://Windows.Microsoft.com/en-in/Windows7/what-s-the-relationship-between-activation-and-genuine-Windows

  What is the validation, and how does it work?
  Windows 7: http://windows.microsoft.com/en-us/windows/help/genuine/what-is-validation?os=win7
  Vista: http://windows.microsoft.com/en-us/windows/help/genuine/what-is-validation?os=winvista

  Authentic Microsoft software program privacy statement
  What data is collected?
  http://Windows.Microsoft.com/en-us/Windows/genuine/privacy-statement

  -Product key of letters and numbers-

  Not confused the letter B with the number 8, the letter Q with the letter O.
  the letter G and the number 6.

  A, E, I, O and u are not used.

  ----------------------------  Alternatives -------------------------------------

  To enable the use of the phone

  1. open Activation of Windows by clicking on the Start button, right click on computer, clicking Properties.
  then by clicking on activate Windows now. ?

  2. click on show me other ways to activate.

  3 type your Windows 7 product key, and then click Next.

  4. click on use the automated telephone and then click Next.
  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  5. click on the location nearest you from the drop-down list, and then click Next.

  6. call one of the available phone numbers listed. An automated system will guide you through the activation process.

  7. When prompted, enter the installation ID that is listed on your screen in your phone keypad.

  8 Note the confirmation ID the phone system gives you.

  9. under the terms of step 3, type the confirmation ID in the space provided, click Next, and then follow the instructions.

  10. If the activation is not successful, stay on the line to be transferred to a product activation agent who can help you.

  How to contact a Microsoft Product Activation Center by phone
  http://support.Microsoft.com/kb/950929

  Activation and registration of a Microsoft product
  http://support.Microsoft.com/?kbid=326851
  Windows activation: (888) 571-2048
  (888) 725-1047 or 800-936-5700

  Microsoft Activation centers worldwide telephone numbers:
  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
  (This site is for activating Volume License, but if you call, they will help you)

  The phone number is not working:
  Microsoft Worldwide contacts: http://www.microsoft.com/worldwide/default.aspx

  Register Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/help/register
  Register Windows 7 and you automatically receive a series of three welcome to Windows e-mails
  filled with tips, creative tips and other information to you help get the most out of Windows 7.
  You also get a subscription to the monthly newsletter of Windows Explorer,
  where you will find other tips and tricks, as well as special offers.

  Learn about Activation:
  http://TechNet.Microsoft.com/en-us/library/ff793423.aspx

  J W Stuart: http://www.pagestart.com

• How do I reinstall window Vista Home premium as I am unable to do recovery disk

  How to reinstall window Vista Home premium as I am unable to do recovery disk. When I run the PCRestore file in the Tools directory, it gives error when starting to make the bet into shape. It gives to tools/dp.sc access denied error. I buy the Dell laptop in 2008 and the company has not sent any CD of Vista window with laptop

  Hello

  With a machine Dell to reinstall Vista, you press F8 at startup.

  CTRL + F11 is to reinstall XP.

  See you soon.

• I have a laptop Toshiba Satellite L305-S5894 with Windows Vista Home Premium installed (32 bit). Unable to get a backup to a flash drive. Error: 0 x 81000029

  Original title: I have a laptop Toshiba Satellite L305-S5894 with Windows Vista Home Premium installed (32 bit).  Unable to get a backup to a flash drive.

  After back back, very many updates of windows, my computer is full of problems and it is not representative of the restore points far enough back to correct.  I want really to save my data and programs for flash drive (s) and then go for a full recovery of the system (return to factory).  When you try to do the backup on a 4 GB USB key I get an error including 0 x 81000029.  I have seen posted answers to this.  Everything is included to aid Vista disk from the window which was not included when I bought my computer. Any help would be appreciated.

  Hello

  The following article should be useful. To use system recovery options, you have Vista installation disc. OEM (Original Equipment Manufacturer) repeatedly will install on the computer Windows recovery environment. To cross check if it is installed, try the following steps.

  1 start the computer and press the F8 key continuously to get advanced boot menu options.
  2. on the menu advanced startup options, check if the Startup Repair tool is in the list.
  3. If so, select it and press ENTER.
  4. If not, then you should organize a Vista installation disc.

  You may receive error messages when you try to perform a backup operation on a Windows Vista-based computer
  http://support.Microsoft.com/kb/950167

• The "fax" interface opens when I press print. Windows 7 Home premium - HP jet Office 6313,

  I had to install an update/fix for this printer (HP Office jet all-in-One 6313) my first installation of Windows 7 Home Premium on my computer (about 3 years ago). This does not all questions (I had a few problems scanning) but the solutions found to get. I recently downloaded the whole package from HP for Windows 7 again in the hope that all such issues would be resolved but havn't got round to install (mostly because I don't know if I should remove the previous first etc.?), but the presence of the new version stopped me to send the impression by opening the "fax" printer interface when I press 'print '. Any ideas - I see I'm not the only one. Thanks Charlie

  Hello Charlie, and welcome to the Forums of HP!

  I see that you are having problems printing.  I would like to help.

  I would say uninstalling the software of the printer.

  Once it is uninstalled, I suggest you put your system in clean boot mode in the configuration of Microsoft.  You can do this by following this document: How to perform a clean boot in Windows.

  Once the computer is in clean boot mode, I would suggest to reinstall the HP printer install wizard for Windows.

  Good luck and please let me know the results of your troubleshooting operations. Thanks for posting on the HP Forums!

• Windows 7 Home Premium 32-bit OS is unable to complete the installation.

  Windows 7 Home Premium 32-bit OS is unable to complete the installation.

  I have a Dell Inspiron 530 of 2007 which came with Vista and has been updated 2 years later at 7 w. I had to reinstall 7 W... 3 or 4 times since 2010. I guess that my machine can't handle W7 very well.
   
  My current problem started with a BSOD problem. After trying some suggestions Internet on how to solve this BSOD problem that did not work, including repair of Windows, I did a data back up mode without failure and then decide to reinstall Windows 7 from the MS CD. My level of understanding is limited, but as noted, I've done this before with success. What I didn't understand is there seems to be another unsolved problem which does not allow the complete reinstallation of windows.
   
  I did a clean install, then a formatting and in both cases, W7 could not complete the installation. It progresses to the final stage of "complete installation" and then there is a second error message 1 that I can't read... "" a problem has been detected... close... "."  It seems to be a reboot loop.
   
  I have since read that the original BSOD problem and the 'detected problem' could also well be linked to the display driver. And this driver it must be disabled before performing a Windows installation. But I'm not able to access Safe Mode or the control panel to turn it off. If this driver is the problem, is there another way to turn it off?
   
  Or are there any other suggestions on how to complete the installation of the operating system?
   
  Thank you.

  I see that you have posted on the Dell desktop Forums and Robert (rdunnill) gave you a suggestion. He is the expert forum on upgrade/repair of equipment in Dell desktop computers:

  http://en.community.Dell.com/support-forums/desktop/f/3515/t/19632098

• When I open gpedit.msc on my computer which is Windows 7 Home Premium, it said THAT MMC could not create the snap-in any1 can help me?

  "When I open gpedit.msc it says MMC could not create snap-in and iam at a lost at what to do is there another way of " "" to disable caching of thumbnails in the hidden thumbs.db files " without using gpedit.msc so so I would like to know, but if it is not a way could some1 please help me with gpedit.msc because it repeat MMC could not create snap-in whenever I open it y at - it a way to fix it?

  
  

  Hello

  Gpedit.msc is not available in Windows 7 Home premium.

  It is available in the Enterprise and Ultimate editions of Windows 7 Enterprise.

  If you want to disable caching of thumbnails, you can access the registry editor and go to changing the location according to the value

  HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced\DisableThumbnailCache

  Set it to 1 to disable the cache

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information on how to to back up and restore the registry,

• SP2 is unable to download after failure of computer with windows vista home premium

  My computer crashed and I restarted after the DELL factory settings is a Windows Vista Home Premium but I can't seem to download the SP2 so that I can get IE9. I have SP1, but when I try to download the SP2 it tells me to get SP1.

  Please do not mark a reply as the answer unless it responds to your question.

  It is what is in my previous answer to check what level of Service Pack you have installed.

  «Click Start > right click on computer > left click on properties > see if you have Vista 32 bit or Vista 64 bit installed.»

  It will also tell you which SP you have installed. »

  What does it there?