Illustrator can't open an Illustration and the Offending operator is {eps_metadata_stream}, however, there is no context. Help?
At my office, we used Shutterstock to get images. Recently, we got a few images to use for the models of the badge, and I have edited mass them in Bridge so that they will have similar keywords, and naming conventions. Now however, when I try to open specific files, the error here:
I guess through the removal of key words and adding new ones, in bridge, I messed up the files.
I tried browsing through some forums, but I can't find my specific error, especially with there is no context list...
I use Bridge and Illustrator CC 2014. The files in question are all of the .eps files. They are all vectors downloaded off shutterstock, during a 30-day subscription.
At the office we use Windows 7 computers.
Can someone help me? As we've been puzzling over this one for a few days.
Lunalutra,
Often tried something first is to create a new document and the file > Place (PDF summary, if any, of the) a corrupt how much can be saved this way.
Here are some sites where you can see if it can save the actual file, and if possible, you can pay a subscription have done,
http://www.recoverytoolbox.com/buy_illustrator.html
http://www.Illustrator.fixtoolbox.com/
I remember, the first is for the victory and the second is for Mac, while the third should be both.
Here are a few pages on struggling with it yourself (you can search for this string in the error meesage when you get to it):
http://daxxter.WordPress.com/2009/04/16/how-to-recover-a-corrupted-Illustrator-AI-file/
http://helpx.Adobe.com/Illustrator/KB/troubleshoot-damaged-Illustrator-files.html
http://kb2.Adobe.com/CPS/500/cpsid_50032.html
http://kb2.Adobe.com/CPS/500/cpsid_50031.html
http://helpx.Adobe.com/Illustrator/KB/enable-content-recovery-mode-Illustrator.html
Tags: Illustrator
Similar Questions
-
I can't open up to manage the network connections for windows 7 there is no link for it
When I go on the Network Center share there is no link on the side to manage network connections and I need to open
Here are two shortcuts to network connections:
- Press the Windows key + R , type ncpa.cpl in the box, and then click OK .
- Click Start , type ncpa.cpl in the Start Search box and press enter .
-
VMPlayer newbie - switch back and forth between the host and the guest operating system
I am newbie to VMPlayer. I just installed VMPlayer 3.0.0 build-203739 on Red Hat Linux 5 (host). Then I created a VM comments Kubuntu (8.10). So far so good. In the VMPlayer window, I selected 'play Virtual Machine '. After this, the host operating system controls disappeared and I could see a taskbar on the top of my screen and I could also see Kubuntu startup (in an area of the small window in the center of the screen). The problem I'm running is that I'm not able to navigate outside of this area of the small window. I'm not even able to click/Select the taskbar of VMPlayer top of the screen. The mouse movement is limited to the area of the small window. How to and fro my host and the guest operating system? Is there a key combination? I finally had to stop my VM guest to return to the control of my host system. I guess it's a problem quite newbie that I am running. Any help would be greatly appreciated.
Hello, welcome to the forum
Host Windows to switch between comments and the OS (when you are in the guest operating system), you must use ctrl + alt.
According to this link , it's the same thing in Linux host too.
>Default VMware Player uses key combination Ctrl + Alt to jump out of the guest. Then CTRLAltdel is accessible via theAltInsert command. If you find this annoying, you can change the jump shortcut to CtrlAltshift by adding the following lines to your ~/.vmware/preferences:
> pref.hotkey.shift = "true".
> pref.hotkey.control = "true".
> pref.hotkey.alt = "true".
After your installation OS in the virtual machine, install "VMware Tools" on it so you will get better performance and some improvements (like moving your mouse out of guest to your host operating system operating system and Vice Versa, or be able to copy beyond host/guest, better resolution on reviews and...)
I hope it helps a bit.
-= If you have found this note/response useful, please consider awarding points to 'Correct' or 'useful ' = -.
-= If there is a mistake in my notes, please correct me! =-
-= Thank you =-
-
I want to add a new application to the list right click on file-> open with
and also reorder the list so my search app is first / top of the list.
I know that I can use open with-> other and select any application, but it takes too long I should use my intended application in this way several times a day.
Basically, I'm looking for a configurable way configure open with, something more to send to Windows.
Thank you very much for all the advice offered.
The operating system, not you, not control that open with the menu command.
-
Can I open a window in the native browser to an application and how?
Hello everyone,
I am currently on an application for the Playbook project and I am a bit stuck, I need to get the answers to these two questions:
-Can I open a window in the native application browser and if so, how?
-Can I I raise the bridge event to open an email in an application as it happens in a Web site after clicking on a link with a "mailto:" address and how?
Thank you in advance!
Kilian KLEIN.
NavigateToURL to use for both.
navigateToURL (new URLRequest ("http://google.com' "));
navigateToURL (new URLRequest ("mailto:[email protected]"));http://help.Adobe.com/en_US/FlashPlatform/reference/ActionScript/3/Flash/net/package.html
-
I can't open my trash and there are files I want to look at it before I empty the tray
original title: Recycle Bin and low taskbar...
I can't open my trash and there are files I want to look at it before I empty the tray. Help, please...
In addition, the fold of library file in the bottom task bar does not open. How can I get these files to appear?
Go into safe mode and see if basket opens fine.
If so, recover the files from the bin and start in normal mode.
Follow the steps from the link below to fix the trash (if it gets corrupted)
How to repair a trash corrupted in Windows 7 and Windows Vista
http://www.Winhelponline.com/blog/fix-corrupted-Recycle-Bin-Windows-7-Vista/Then run SFC scan:
How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
http://support.Microsoft.com/kb/929833Man is the only animal that laughs and cries; because it is the only animal that is struck by the difference between what things are and what they should be.
-
Video uploads to the creative cloud but can not open it? And wrote of zero byte
Video uploads to the creative cloud but can not open it? And wrote of zero byte
You download the file using file synchronization or the use of the active site CC to https://assets.adobe.com? Which shows Details Panel? It should show the size.
For example:
-
I just started to use a new version of Illustrator and the text I've created has a pink box behind, seems to be on the depth of the normal linespace, it is not visible in outline view, only in the preview. What is this and how do I get rid of him?
A pink box indicates that the font is not installed. This is a file that you have worked before, or is this a new file?
-
iMac can't open pages doc in the cloud
Now that I'm going to keep the ' 08 version of Pages, I can't open any docs on the iMac. I have to go to iCloud.com. error mess. said that I'm missing 'index. XML FILE '.
The index.xml file is an internal single pages ' 08 and ' 09, but excluded from all Pages v5 documents. Pages for iCloud generates Pages v5 compatible documents. When you try to open a document in Pages v5 incompatible in Pages ' 08, you get truthful dialog the index.xml file is missing.
Exit Pages ' 08 and then open that document in Pages for ICloud v5 Pages, or Pages v5.6.2 for Mac.
-
I can't open some programs and also when the computer start he says that gfxui has stopped working. What I have to do work?
Hi, Rosemary,
Do you know when this problem started? Try a system restore to a point in time BEFORE the problem started. If the first attempt fails, then try an earlier point or two. NOTE: You will need to re - install any software and updates that you have installed between now and the restore point, but you can use Windows Update for updates.
Without knowing your OS or the exact error message and everything Word to Word or the manufacturer, brand and model of your computer (especially the chipset), it is very difficult to provide you with clear instructions or recommendations; However, here is a link to another thread where someone had the same problem and there are two solutions (both different and both worth a try - if the first doesn't work, try the second): http://answers.microsoft.com/en-us/windows/forum/windows_7-performance/gfxui-has-stopped-working/e7f88c22-7c58-4fc2-9ae9-667556d0c4fc.
If this does not help, check out some of the alternative links on this problem in the following search: http://www.bing.com/search?q=gfxui%20has%20stopped%20working&PQ=gfxUI&SP=2&QS=AS&SK=AS1&sc=8-5&form=BB07SS&pc=BB07. If you want, you can refine the search to include more information, such as your operating system or suite of the message and the results could be more useful.
I hope this helps. If this isn't the case, post back with the above-mentioned information that would help as well as what you have tried and what happened when you did.
Good luck!
-
How can I open picture veiwer and windows fax
How can I open picture veiwer and windows fax
Hi Jazll,
You can any image right click and select open with... This will allow you to open the image in the Windows fax and picture viewer.
Windows fax and picture viewer is not a self-contained exe file, you are asked to call a dll file.
It follows the command line...
Rundll32.exe C:\WINDOWS\system32\shimgvw.dll,ImageView_Fullscreen
You can click on start-> run, type &-> rundll32.exe C:\WINDOWS\system32\shimgvw.dll,ImageView_Fullscreen-> ok.
If you are missing the open icon with you can try open file jpg by the following method:
Open my computer-> file types-> select jpg-> Advanced-> Double click on Open->-> tools-> Folder Options and paste-> rundll32.exe C:\WINDOWS\system32\shimgvw.dll,ImageView_Fullscreen %1-> in the application used to perform action-> Ok on all screens.
Now, when you click any jpg file, it will open Windows fax and picture viewer.
I hope this helps.
-
I received an email with pictures and the bos appeared Photo Gallery can't open this picture. The file format is not supported or you do not have the latest updates to the photo gallery. I am running Vista on a Toshiba laptop that I bought in July 2009. What I can do to update the Photo Gallery or something else to see the pictures. I tried to download Stuffit Expander, but which did not help.
Hello
Thank you for using the Microsoft Vista answers Forum.What is the file format of the images?
All the pictures have the same symptoms?
Disable the antivirus software on your computer and check if it works very well.
Make sure you have all updates for your version of Vista.
You can also try the new Windows Live Photo Gallery, as it has more features and should solve your problem.
http://get.live.com/Photogallery/overviewPlease let me know if this helps you.
Kind regards
Yama - Microsoft technical support. -
HELP-I can't open things such as the restoration of the system or the command prompt, etc without being asked to "choose the program you want to use to open this file"
so boringHello
Download and run the fixit tool from the link below and check if this solves the problem.
http://support.Microsoft.com/kb/950505
Kind regards
Afzal Taher
Microsoft technical support engineer -
Adobe *.pdf files can be opened in Internet Explorer, the default program can not be changed to acrobat reader in the properties or select 'Open with'. Cannot change the default program of Adobe in the file association list.
I have the latest version of Adobe (9.3.3).
Hello
Don't forget to log on as an ADMINISTRATOR
Use this utility to unassociate the. PDF and then re - associate with Adobe Acrobat Reader.
How Unassociate a Type of Extension file in Vista and a utility to help
http://www.Vistax64.com/tutorials/91920-unassociate-file-extention-type.htmlHow to set default Associations for a program under Vista
http://www.Vistax64.com/tutorials/83196-default-programs-program-default-associations.htmlHow to associate a file Extension with a program Type in Vistahttp://www.vistax64.com/tutorials/69758-default-programs.html
How to view and change an Extension of filename on Vista
http://www.Vistax64.com/tutorials/103171-file-name-extension.htmlRestore the Type Associations by default Vista file extensions
http://www.Vistax64.com/tutorials/233243-default-file-type-associations-restore.html
I hope this helps.Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
Hello world
I have back Windows 10 to Windows 7 Home Premium as suggested previously and it worked fine. Then knit as well as the sound function keys, but I now have a problem with the printer. I have a Toshiba Satellite.
I am trying to print and get the message "...". You must install a printer.
I reinstalled my Epson WF-2630, but when I try to add a printer in devices and printers, I receive the message "Windows can't open add printer." The local spooler service sprint does not work. Please restart the spooler or restart the machine.
Can someone help, please?
Thank you very much
WestAusShortie
Hello West,
Thanks for posting your question on the Microsoft community.
Thank you for details on the issue.
This problem may occur if the print spooler service is not running.
Please refer to the suggestions of John Rubdy replied on April 29, 2010 and check if that helps.
http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/Windows-cant-open-add-printer-the-local-print/41f98aad-3a9c-47A6-978b-7c20e3ce9e0bI hope this information helps.
Please let us know if you need more help.
Thank you
Maybe you are looking for
-
I lost safari that you can download. need for mac os 10.7.5
can someone tell me how get safari for my system OS 10.7.5 I've tried to get but ether new versions of safari and cant or first versions that cannot be used. such a thing easy, difficult.
-
Problems starting after installing memory
I just upgraded the memory on my iMac 27 "end 2010 exchanging modules of 2 x 2 MB for 4 x 4 mb. I bought the original Samsung memory to a Mac (Mac Speicher Shop in Germany) hardware store and follow the instructions to the letter. My mac started fine
-
For some reason any I can no longer trigger my desktop shortcuts. (right click or left click no longer work please can anyone help.) Thanks.blueboyjohng a lot
-
Anyone know what that CompatTelRunner.exe is/does?
Ask yourself what did CompatTelRunner.exe on my computer?
-
I don't have an option to create a folder
I have a HP Pavilion g6-1d21dx Notebook Pc and I don't have the ability to create a breifcase but all I want to do is to create a folder and the office create new folder does not work