Illustrator CC accidents unless connected to specific Wi - Fi

Similar Questions

• HP Pavilion Notebook-15-p108tx: problem connecting with specific programs

  Hi, I had problems connecting with specific programs recently. I'm still able to communicate online through web browsers. Mozilla Firefox works fine, but Google Chrome still has some problems loading of specific pages or they don't load at all. The main programs I am having difficulties with are mainly games platform programs like Steam, Battle.net, and League of Legends, and I'm unable to go online or to connect to their servers.

  I never had no problem connecting like these last two years that I've owned my laptop, until recently. I think it was the 6th or 7th of may these problems started.

  I updated my drivers and was constantly check to download the most recent. I don't know if it's my internet provider, but I was also constantly check the State of the network to ensure that the services are very good.

  If anyone else has this problem and if there are any suggestions that you think could help solve this problem, it would be appreciated.

  Thank you

  Jasper

  Hi Jasper,.

  Thank you for the update. I think that your computer have a rootkit infection. Most of them were inside of the Chrome Extensions.

  Here's what you need to do.

  Open chrome

  Click on the Menu bar in the upper right

  Click more tools

  Click Extensions

  Please search for suspicious extensions that does not belong to the computer, especially ads. Once you identified, simply click the trash can icon then Chrome close then reopen it again to see if you can connect to your desired game. If this isn't the case, then proceed as follows.

  Manual removal of suspicious files (if you are uncomfortable with it. If this is not the case, then run System Restore from safe mode with command prompt)

  Manual removal (I miss the old days of MS virus removal )

  Go to RUN type %temp% , and then delete all folders by pressing SHIFT + DELETE

  Go to Control Panel and then locate all the apps that you think a form of ads

  Go to safe mode with network. Run Malwarebytes in that State

  Then run Tweaking tool to fix everything that has changed since your computer

  http://www.Tweaking.com/files/setups/Tweaking.com_windows_repair_aio_setup.exe

  If your not comfortable with the troubleshooting steps may perform the system restore on the day, it was working fine.

• 12 c grid/RAC - how to connect to specific instances - steps required?

  Hello

  I have a Setup RAC 4 knots and I want to be able to backup of all 4 nodes simultaneously. To do this, I want to connect explicitly to each instance of RMAN rather than connect to the DBSID. What is the way for me to do the same? I am not able to connect to specific instances of SQLplus/TNSPING as well as I think that IP SCAN is not able to resolve the SID of the DB, and not the instance ID. When I specify the connection string, there is no failure that it allocates channels automatically to instances (instances of 2 and 2 knots are inactive and do not participate in the backup).

  • -What are the steps I have to do to reach the bottom in order to connect to particular instances of SQLplus?
  • -Should NetCA what I use to set up TNS/Listener - database or a grid?
  • -Steps I need to take on all the nodes instead of a single node?

  Any help is welcome!

  RMAN > RUN {

  2 > ALLOCATE CHANNEL ch00 TYPE connect "sys/oracle@realdb_1" FORMAT DISK '\\192.168.2.11\test\DF_CH00_%U'

  3 > ALLOCATE CHANNEL ch01 TYPE connect "sys/oracle@realdb_2" FORMAT DISK '\\192.168.2.11\test\DF_CH01_%U'

  4 > ALLOCATE CHANNEL ch02 TYPE connect "sys/oracle@realdb_3" FORMAT DISK '\\192.168.2.11\test\DF_CH02_%U'

  5 > ALLOCATE CHANNEL ch03 TYPE connect "sys/oracle@realdb_4" FORMAT DISK '\\192.168.2.11\test\DF_CH03_%U'

  6 backup additional 0 database >

  7 > CHANNEL ch00;

  8 > CHANNEL ch01;

  9 > CHANNEL ch02;

  10 > CHANNEL ch03;

  11 > }

  RMAN-00571: ===========================================================

  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.

  RMAN-00571: ===========================================================

  RMAN-12001: could not Open channel ch00

  RMAN-10008: could not create channel context

  RMAN-10003: impossible to to connect to goal database

  ORA-12154: TNS: could not solve the connect the identifier specified

  Hello

  You defined individual entries for all instances of your tnsfiles.

  Please check your connection string got all the entries in realdb_1, realdb_2, realdb_3, realdb_4 that you do not service or name of SCAN.

  Thank you

  M

• ACS can run commands when connecting to specific users?

  I have a scenario where I want a command to execute at the time where a user connects in the device. ACS in the name of the user during the logon process?

  Cliff,

  We must use the RADIUS 'Auto Command' attribute

  Kind regards

  ~ JG

  Note the useful messages!

• Illustrator CS6 accidents

  problems for save files to illustrator CS6. Don't know what to do.

  anyone else having the same problem.

  Hello Gisele,.

  To add to what Monika said so far. You work with older existing files? Have you tried to reset the preferences? Here are some links that will help.

  If you create a new file and draw a simple shape. Then save the file to the desktop. Illustrator crash?
  I'm agree by checking the permissions of the files if you save to an external drive. Test with recording first to the local disk. Have you updated Illustrator?

  You have any 3rd party plugins installed, or have attached tablets? You use a view double screen?

  https://helpx.Adobe.com/Illustrator/using/setting-preferences.html

  https://helpx.Adobe.com/Illustrator/KB/troubleshoot-damaged-Illustrator-files.html

  Scott

• How to connect a specific error in IOM

  Greetings!
  
  I'm trying to implement a logging mechanism to IOM, using log4J.
  
  So far, I can connect without problems in an oracle database.
  
  What I need, right now, is the ability of adapters error logging. For example, I log an event before update, produce something like this in my journal of database: ' Login: xpto; "." So far so good.
  
  However, sometimes I got an error while trying to import a user to IOM. For example:
  
  + [XELLERATE. SERVER], class/method: tcUSR/validateUserManager error: the specified Manager causes cycles. +
  + [XELLERATE. SERVER], class/method: tcUSR/eventPreUpdate error: the User Manager is not valid. +
  + [XELLERATE. SERVER], class/method: tcDataObj/save Error: Failed + data update
  
  I want to record this information in my journal:
  
  -connection
  -operating status
  -error (if there is one)
  
  Where should I put my recorder to get this kind of information?
  
  In advance, it is not just enough to redirect the output to the database log, because we want to be able to aggregate all information about a user in a single register, for example: login: xpto; company: cia1; name: Xpto Smith; job: Manager; status: ok or xpto; company: cia1; name: Xpto Smith; job: Manager; status: class/method : tcUSR/validateUserManager error: the specified Manager causes cycles.
  
  Could someone help me? If there is a paper, article or showing it similar topics in how to connect to the IOM of the art, I'd appreciate it also.
  
  in the event that I couldn't express my problem very well, I'll be happy to add information; as you can see it, I have mastered enough English to write well. ;-)
  
  Thanks in advance,
  
  Trimagister

  IOM is delivered with STANDARD logging functions.

  public static Logger logger = Logger.getLogger ("OIMCUSTOM. RECORDER');
  Logger.Debug ("PRINT THIS LINE");

  You can use these lines in your custom code.

  You should configure these loggers to IOM.

  download.oracle.com/docs/cd/B31337_01/doc.901b31119.pdf

  Search for "allowing logging.

• Since this morning, when I try to attach a file, T-bird 24.4.0 accidents unless I log on XP as an administrator.

  I tried several times to attach a file to a message and every time T-bird crashes. I tried to run T-bird as an administrator and when I did I could attach files.

  All of a sudden this afternoon we started work. Go figure.

  Thank you very much for your answers.

  Richard

• Illustrator CS5 has more options available specific tools (area of framing, etc..)

  Yesterday, I was able to use the drop down menu tool options for the selections, including the magnetic lasso tool, the polygonol lasso tool, all the selection tools of text scrolling and fast (as in photoshop) selection tool that I use for several months now, still today, all these tools have disappeared. Instead I don't have the magic wand and lasso tool. No one touched my computer since yesterday, I have reset my workspace, toolbars, I checked the keyboard shortcuts window and these tools are no longer an option. I have reset my screen resolution. Nothing. Perhaps my system has been updated automatically? If so, that is the worst update since the tools I used (especially the marquee tool) are no longer available, and instead of this, I have two that I've never used that have features limited (as opposed to yesterday). I tried to make the chat support online, to which I was redirected to the telephone line. From there on, I was told that I would get any support. Help, please. I NEED MY SELECTION TOOL.

  magnetic lasso, lasso... tool polygonol tool? ! never existed in illy. only the lasso tool... ?

• T connection

  Today,.

  Illustrator is unable to connect two lines without creating a form?  As in a T or a departure from the line and being redirected to a form.

  Y at - it a plugin for that?  Freehand allow?

  JPD

  I'm not really. You can not do using alignment guides / smart? If you are referring to IA nopt allowing anchor to pin point to specific other paths so that they update when you change the paths, then Yes, it is not possible. otehrwise I see no problem here. Even in other programs, this requires working with special graphic tools to keep the noodles / connectors 'life '.

  Mylenium

• Bluetooth wireless connection

  MacBookPro OSX El Capitan; Version 10.11. Retina display - MacBookPro connects to the printer HP C6150 help electrician with no problems. not then attempt to use the bluetooth connection.

  To a printer wireless connection works using old MacBook. Bluetooth connects to the mouse and works very well.

  Select the Bluetooth device-

  The computer icon shows - not connected

  Apple mouse - connected

  Hello analyst.1,

  Thank you for using communities of Apple Support.

  I understand that you can print from your MacBook Pro to your HP using Ethernet and wireless printer, but not via Bluetooth. I know how it is important to ensure that you can connect to your printer via Bluetooth. I'll be more than happy to help you with this.

  Use OS X El Capitan: Add or remove a printerand make sure you have the latest version of the software installed and printer connection instructions, specifically, this section:

  Add a Bluetooth printer

  1. Update your software: choose the Apple menu > App Store, click updates, and then install the listed software updates. Even if no updates appear, this ensures that OS X has the latest information on printing software you can download from Apple. If you don't do this, you see a message that software is not available when you connect your printer.

     If you have a printer AirPrint, you have no need to check the software updates.

  2. Prepare your printer: use the instructions that came with your printer to unpack the printer, install the ink or toner and add paper. Turn on the printer and make sure it is not the display of errors.

  3. Connect your printer: follow the instructions that came with your printer to make sure it is ready to connect through Bluetooth. You must also make sure to activate Bluetooth and set up the printer Bluetooth as a new device.

  After connecting your printer, if you see a message prompting you to download new software, be sure to download and install it. OS X will automatically use AirPrint if your printer supports.

  Have a great day!

• 2012R2 server unable to RDP when it is specified to specific computers

  Have spent hours looking through these forums and so far nothing I've found seems to solve my specific problem. 2012R2 server running as a DC with RDG installed services. Trying to configure a connection to the Office Manager, so she can remote in home and connect to its specific desktop. Connection is configured to be secured through the gateway desktop Services remotely, everything installed and configured on the server. I use only a question.

  In the applet Active Directory users & computers, all user accounts are set up to allow the connection to specific computers, including that of the head of office. (She was allowed to connect on one of the three computers in his office). When she attempts a home RDP connection, the connection is successful only if his account is configured to allow connection to all computers. When I put it to connect to specific computers, there is the RDP fails with "your computer cannot connect to the remote computer because an error has occurred on the remote computer that you want to connect".

  Now, thinking that since I was specifying specific computers to user accounts, I added the server on his own as one of the computers she has allowed to open a session, thinking that authorization was needed for it to connect to the remote gateway. However, that made no difference. Still got the same error.

  So, what should I do to allow this account to connect remotely over the Internet, without allowing this account to log on all computers? I'm puzzled.

  Try asking in the Windows Server forum:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• I can not connect my printer to the new laptop. main computer ___my's upstairs

  I can't connect to my printer which is on the floor with my main computer.

  Here is a tutorial on how to set up a home network (including a wireless)-click on additional links for more information that may be helpful:http://windows.microsoft.com/en-US/windows-vista/Setting-up-a-home-network.

  Here is an article on troubleshooting network connections wireless (with links):http://windows.microsoft.com/en-US/windows-vista/Troubleshoot-network-connection-problems.

  This is a long article by Microsoft on the file and printer sharing which will probably provide information that will help solve your problem:http://technet.microsoft.com/en-us/library/bb727037.aspx.

  I hope this helps.  If no, please provide further information on exactly what problem you are having, what messages you have found (the word EXACT text), exactly how you try to configure the connection (which specific procedure you follow), the printer said after the connection attempt is made (if you even get here), these two computers operating systems (including versions) , the manufacturer, the brand and the model of the printer and any other information you think might help us help you.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Tunnel to establish an SSL connection inside a SSL connection

  I have an application that establishes a SSL30Connection with a web proxy server. This connection is opened using the ConnectionFactory. To enable HTTPS through proxy web, trying to create an SSL connection to a website (for example google.com) that uses the proxy server of SSL connection as its "subConnection" (see javadocs for SSL30Connection). When I try to do, I find myself with an EOFException or a ConnectionClosedException.

  I am aware of the workaround described here and have tried to use it, but still, the SSL connection to the remote server does not.

  Does anyone know if this kind of functionality is supported by the BB? Is there a 3rd party API that could achieve this?

  I open a topic in the RIM developer Issue Tracker as well:

  https://www.BlackBerry.com/jira/browse/JAVAAPI-2179

  Thank you.

  It turns out that several things went wrong.

  (1) the proxy has been close the connection after I read the response HTTP CONNECT. The fix for this consisted of two parts:

  ++ By adding a "Proxy-Connection: keep-alive" header.

  + Changing the way I read the answer. Before, I read the inputStream in 256 b pieces until Ihit-1. I changed it to simply read until I touched a line return character as the CONNECTION response is onlyone linelong.

  After you make these changes, I was able to make a socket: / / connection to the proxy and then do a ssl: / / to the remote server with the proxy as subConnection of ssl connection. However, when I tried to do a ssl: / / connection to the server, I always got the EOFException at the opening of the ssl: / / connection to the remote server. Then, like Santa himself immersed in to give me a Christmas gift at the beginning... I remembered that I had met problems with ssl: / / connections before; specifically, to write data to an ssl: / / OutputStream of connection REQUIRES a call to OutputStream.flush (). If you don't flush, data is never written (or the buffer is really big... anyway, adding that a function flush() suits). Remember this problem led me to the last part of the solution to this problem.

  (2) I wrapped the proxy ssl connection and its already open input and output stream in a class that looks like this:

  public class ProxyStreamConnectionWrapper implements StreamConnection {
  
      private StreamConnection stream;
      private DataInputStream inputStream;
      private DataOutputStream outputStream;
  
      public ProxyStreamConnectionWrapper(StreamConnection stream, DataInputStream dataInputStream, DataOutputStream dataOutputStream) {
  
          this.stream = stream;
          this.inputStream = dataInputStream;
          this.outputStream = dataOutputStream;
      }
  
      public DataInputStream openDataInputStream() throws IOException {
  
          return inputStream;
      }
  
      public InputStream openInputStream() throws IOException {
  
          return inputStream;
      }
  
      public void close() throws IOException {
  
          stream.close();
      }
  
      public DataOutputStream openDataOutputStream() throws IOException {
  
          return new DataOutputStream( openOutputStream() );
      }
  
      public OutputStream openOutputStream() throws IOException {
  
          return new OutputStream() {
  
              public void write( byte[] b, int off, int len ) throws IOException {
  
                  outputStream.write( b, off, len );
                  outputStream.flush();
              }
  
              public void write( byte[] b ) throws IOException {
  
                  outputStream.write( b );
                  outputStream.flush();
              }
  
              public void write( int b ) throws IOException {
  
                  outputStream.write( b );
                  outputStream.flush();
              }
          };
  }
  

  I got the idea of this wrapper from a previous post I already linked to above. The solution is in the openOutputStream() method. Adding the function flush() after each write the ssl handshake forces given the connection to the remote server ssl proxy server offline.

  Merry Christmas!

• How can I change my connection Wireless to cable?

  Hello

  I bought a new PC, and during the installation, I accidentally clicked 'connect wireless' instead of being wired. At least once a day, my wireless connection "resets", which would normally not be a problem if I just surf on the ' net, but I play video games online, and it disconnects me from the game server. Sometimes, it becomes very annoying.

  I don't know where to go on my computer to change the settings for wireless for hard cable. I am currently connected to the router via a cable as well, but it always shows that I'm connected wireless.

  Can anyone help? Thanks in advance.

  Hello

  These should help:

  Wireless Network - connect to or disconnect in Windows 8
  http://www.eightforums.com/tutorials/37737-wireless-network-connect-disconnect-Windows-8-a.html

  How to enable or disable the Wi - Fi Windows 8 and 8.1
  http://www.eightforums.com/tutorials/41506-Wi-Fi-turn-off-Windows-8-a.html

  How to enable or disable a NIC (NIC) in Windows
  http://www.eightforums.com/tutorials/37681-network-adapter-NIC-enable-disable-Windows.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• I want to know what I need to look at when buying a router for 50 concurrent users, 1 server connection information

  Original title: router Question.

  Hi all

  not sure if this is the right place to post but I was looking for some information about routers. specifically, I want to know what I need to look at when buying a router for 50 concurrent users, 1 server connection information. specifications, etc.

  Thanks :)

  Some routers will define a limited number of simultaneous connections. Domestic routers rarely do because the assumption is that the environment will not include such a high number.

  Ideally in a commercial environment you would separate on the hardware connection since the hardware firewall. It depends on the type of connection (ADSL?).