Illustrator CC code blocks

Similar Questions

• code blocks fstream problem

  Hello, so I installed code blocks the 10.05 (until I got 12.11) and I tried to use the fstream library and this is what happened:can u help me?

  I deleted who ">" and he said the same thing.

• Code blocks doesn't work do not help me:)

  Hello, so I downloaded the blocks of code with the xcode and the command line, I disabled the code completion and keyboard shortcuts (btw, I have blocks of code 12.11) and when I try the default project in the terminal appears this thing:what is happening?

  It is not so much a question of Code::Blocks because it is a command line.  When you use the command line, spaces are used to delimit the parameters and options, but cite your file path or escape spaces in the name.

• Violation of timing when adding code blocks parallel to each other in a FPGA SCTL

  Hey guys!

  I have a problem with my code inside a SCTL of running on an FPGA VI and hoped someone could help me.

  I work with a 120 MS/s ADC and write the data to the FPGA block of memory in a 120 MHz SCTL. Since the data has to be 'mixed' there is also a code to get the correct address (by first example data at address 0, second to address 20, 40 and so on until 2000, then I start with 1, 21...).

  I have a second block of code that later, when writing is completed, reads in the block of memory to perform some calculations (a linear slope of the signal interpolation)

  The two parties are implemented using pipelining (I say this because I think it would be the first response of the community), while if I compile only one, everyone needs about 7 to 8 ns to run, which means that they meet the requirements to run in my 120 MHz SCTL (8.33 ns).

  But when two blocks of code are in the same field of clock (whether in ore SCTL in two SCTLs using the same clock) from the FPGA VI I get a timing violation, saying that the code in the SCTL needs 17 ns (logical and delay routing) to run. It is not also show me the critcal way, just the SCTL. Because the code runs at the same time, I don't see why the delay of logic should increase (to 12 ns). The only way 2 code blocks communicate with each other are the memory of block and some shift registers so the path of Combinatorics is not increased.

  I already checked whether the SubVIs (I use one per block of code to avoid the lack of clarity, but they are different) are the problem. If the code in the SubVIs implemented directly in the FPGA hand VI it does not change the delay of logic.

  50% of the registers and the lut FPGA are used, the DSP48s of 5% and 50% of RAM block, so I don't think that the problem is something like the compiler finds not enough free slices to create fast paths.

  The main problem is not that the delay of routing increases, but the delay of logic.

  Does anyone have an idea what could cause this huge increase by delay time?

  I use labview 2011 and 12.4 Xilinx.

  Try not to put memory read the node within a box structure. Instead, you can always read from a fixed address, say 0, when the data are not all ready. Reading a memory will not damage your data contrary to push from a FIFO. If your memory by reading the node is inside a case structure, there will be a mux when data is passed outside this business structure, which will increase the delay of logic.

  In addition, I also recommend that you do not use the loop of the index 'i', if you are running at high clock frequency. This counter is seen to be 32-bit, and you probably don't have a memory that deeply. LV FPGA is to have logic check inside the read node memory address range, so width incorrect address can still be important. You can implement instead of your counter code which the width of the tip is appropriate.

• How to display the drop-down list box in MS excel by using labview report generation toolkit? pleasepost code block diagram?

  How to display the drop-down list box in MS excel by using labview report generation toolkit? Please post the block diagram of the code so that I can able to generate from the drop-down list box in excel with the menu drop-down...

  Like this. (edition, use the reference forms instead of the reference to the worksheet)

  Ben64

  

• Button to run the code block.

  Hello.

  I want to execute a block of code with the push of a button, but I can't find the solution.

  My vi is attached. Any help is welcome.

  Thank you.

  Hello vakost;

  A few points:

  -L' mechanical action of your Boolean is ready to "lock when published. In other words, it will reset to False after having read once.

  -You have no calendar control software in your loop, it is what is known as a "greedy loop" and run as fast as it can possibly

  For this reason, your true case runs, but that one time when you release the button and the button will be reset to False until you see probably because the loop runs probably thousands of times per second. If you enable execution highlighting to slow down execution of the VI to something, that you observe, you should see the Boolean indicator lights briefly before you reset it.  You must always place a wait function inside your loop to slow things up to a reasonable speed, however.

  Some other tips:

  -You only required to place the indicator Boolean inside the structure of business if you want to update in two cases (that you use a value of property in the other node) - just place it outside of the structure and the value you want to set out the case of wire

  -You created a while loop without stop condition, and VI must be abandoned to stop it.  Generally, you'll want to give the user a stop button to get out of the VI, abandonment is almost never a good idea.

  Kind regards

  -You don't need really the case structure in this case, he could just wire the Boolean OK button directly to the indicator.  My impression is that it's just a conclusive example or experience in how cases structures work, however, it's probably fine.

  Hope that helps!

• hpsddObjSigned.code - block off

  I got recently my sleeve of film HP printer fuser unit repaired.  I have connected the printer to the same USB port on my computer with the same cable.  There is no communication.  HP has similar to the Fixit MS software.  However, I'm unable to use it.  Is the answer to the screen, "Windows has blocked this software because it cannot verify the Publisher hpsddObjsigned.code. I would like to know how to disable this block.  In addition, anyone have ideas on how to solve this problem?  Thank you.

  Hello

  • It happens only with this download?
  • Are you using Internet Explorer?

  Step 1: Add the site to the trusted zone, you have problems

  (a) open internet explore > go to the Tools menu, click Internet Options

  (b) click the Security tab and then click on Trusted Sites

  (c) click the Sites button. Add this website to the zone, enter the address of the Web Site, with that you are having problems, and then press the Add button.

  (d) click OK twice. Check if the problem persists.

  Important:-don't do that for sites Web whose content trust you 100%.

  Refer to http://windows.microsoft.com/en-US/windows-vista/Why-does-Internet-Explorer-block-some-ActiveX-controls

  Step 2: Temporarily disable user account control and check.

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-user-account-control-on-or-off

  Note: We do not recommend disable user account control. If you turn it off, you must reactivate as soon as possible.

  Diana

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• PowerState situation - problem with the code block - returns false, but seems real to list extended properties

  If this provision of the code (part of a script a lot bigger) seems to not work properly.  It returns false when it should return true.  Basically I want my script to verify that virtual machines are turned on by the admin of the script running.  There will be a break in case of failure and then press a button to try again.  Here is the block of code (which I have shared out in his own script to test).

  #Import the CSV
  $vmlist = Import-CSV d:\scripts\migration.csv
  
  #validate VMs are powered up on the new vCenter
  foreach ($item in $vmlist) {
    $vmname=$item.vmname
    $powerstate = (Get-VM $vmname).extensiondata.Guest.PowerState -eq "poweredOn"
    IF ($powerstate -eq $false) {
    write-host ""
    write-host "$vmname has failed to start, please confirm the VM is up.  Script will pause." -foreground Yellow
    write-host "Bring $vmname backonline then" -foreground Yellow
    Write-Host "Press any key to retry..." -foreground Yellow
    Write-Host ""
    $null = $Host.UI.RawUI.ReadKey('NoEcho,IncludeKeyDown')
    }
       ELSE {
    write-host ""
    write-host "$vmname is powered up, script will continue" -foreground green
    write-host ""
    }
  }
  

  To list extended properties, it returns the correct information:

  PowerCLI D:\scripts > Get - VM ATEST-VM002 | format-list *.

  PowerState: receiving

  When I run in the script with the extensiondata. Guest.Powerstat, it returns false.

  PowerCLI D:\scripts > .extensiondata (Get - VM ATEST-VM002). Guest.PowerState - eq "receptor".

  Fake

  What should we not

  . ExtensionData (get - VM $vmname). Runtime.PowerState - eq "receptor".

  But why look in the ExtensionData that same property is exposed as (Get - VM $vmname). PowerState

• Illustrator CC2015.2 blocked flash Panel extension loading

  Hi all

  I have a flash extension ZXP; When loading, Illustrator CC2015.2 (El Capitan) appears to be blocked forever and never my screens.

  Strangely, endearing XCODE Illustrator 2015.2 unlocks the Panel!

  Any idea?

  PS: I have no problem with my Panel on CC2015.1 on Yosemite 10.10.5 extension

  Thank you

  JM

  Was solved by moving the OS El Capitan of 10.11 in 10.11.2 (Dec 8).

• the trial of Adobe illustrator serial code

  where do you get you serial code to sign in your 30 day trial for adobe illustrator?

  There is no serial number required to use a trial version.  There should be an option to continue to use the trial.  You'll need one after the end of the trial period, and you get by buying the program.

• Updated - Setup of Illustrator error code U44M1P34

  Hi all!

  I tried to install the updates for Illustrator, but now I get the same error.

  "Adobe Illustrator CC update (version 17.1.0) x 64

  There was an error of installation of this update. Quit and try again later. "Error code: U44M1P34.

  I've uninstalled and reinstalled Illustrator twice, in the hope that this will solve the problem, but with not much luck.

  What can I do else? Please, any help would be welcome.

  Thank you!

  Hi PoppyBio,

  This error comes usually when you move the adobe folder to the other location on root drive and try to update the application. I suggest you to uninstall the application and delete all files from adobe. Restart your machine and install the application again and check for updates. It should work.

  Thank you!

  Florianne

• Illustrator - exit code: 7

  I was originally on a set of graphic software at my University, I have been the metriculated of.

  I bought student/teacher of CS5.5 licensing, the creative suite Master Collection.

  All updated very well except for Illustrator - I've been through telephone lines and chat lines and nothing has helped so far. I don't understand why) he's trying to install 5.1 from the drive, not to mention what this error (why is it setting up photoshop questions when he is Illustrator)?

  The absence of electronic tickets for more data, I come here looking for you techy people wise and competent help!

  Exit code: 7

  -------------------------------------- Summary --------------------------------------

  -1 fatal Error (s), 3 (s), 3 WARNING (s)

  WARNING: DW031: payload: Adobe XMP panels CS5 3.0.0.0 {6A2E619B-E4AC-433B-A648-D458CE543A96} has been updated and has been selected for repair. The {5C0FEBDA-5A0E-4FC8-91CB-229A4C1561E9} patch Adobe XMP panels CS5_3.1_AdobeXMPPanelsAll 3.1.0.0 are uninstalled now.

  WARNING: DW031: payload: camera profiles Installer 6.0.0.0 {3F023875-4A52-4605-9DB6-A88D4A813E8D} has been updated and has been selected for repair. The {A189C479-C7CD-4E08-8CCF-D999B68C0C71} patch camera profiles Installer_6.3_AdobeCameraRawProfile6.0All 6.3.0.0 are uninstalled now.

  WARNING: DW031: payload: Photoshop Camera Raw 6.0.0.0 {37AB3C65-E02C-4DCF-B0E0-4C2E253D8FA3} has been updated and has been selected for repair. The {FD58D99B-9927-4226-8E00-959A4F76BD89} patch Photoshop Camera Raw_6.3_AdobeCameraRaw6.0All 6.3.0.0 are uninstalled now.

  ERROR: DW020: found payload conflicts and mistakes:

  ERROR: DW020:-Adobe Photoshop CS5.1 Core depends on AdobeColorPhotoshop CS5.5 to be installed.

  ERROR: DW020:-Adobe Photoshop CS5.1 Core depends on AdobeColorVideoProfilesCS CS5.5 to be installed.

  FATAL: DW020: conflicts were found in the selected payloads. Stop the installation.

  -------------------------------------------------------------------------------------

  Errors ' Exit Code: 6, "" Exit Code: 7 ".

  Mylenium

• Where to put the code block that is used by several checkboxes in a form

  I'm new to Javascript, please go easy on me.

  I have a form with several boxes on it.      I have a block of javascript code that I want to run any time one of the check boxes on the form is enabled or disabled.

  I know that I can put javascript code in each box properties, but it seems that there should be an easier way to do it.

  Can I create one subroutine somewhere else and call it from javascript for each text box code?

  If I can create a subroutine and call from each text box, where should I put the subroutine?

  Help, please.      Example (s) would be great.

  Here's a good tutorial on the subject of the JavaScripts at the level of the document: http://acrobatusers.com/tutorials/js_document_scripts

• Activation code blocked

  I bought and activated Windows 7 Professional for more than a year. Recently I started having problems I did a re install. Now, I get the message that my key has been blocked by Microsoft.

  Have you tried to restart by phone?

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us
  ----------------------

• ColdFusion, builder2 not minimize (collapse) average good code block

  As for this masking of the code does not work correctly:

  <! DOCTYPE html >

  < html >

  < head >

  < meta http-equiv = "Content-Type" content = "text/html"; charset = "utf-8" / >

  < title >

  Untitled document

  < /title >

  < / head >

  < body >

  < div class = "body-content container" >

  < div class = "row position" >

  < div class = "col-md-12" > ""

  < h3 >

  Search by product

  < / h3 >

  < / div >

  < / div >

  < div id = "ProgressIndicator" >

  < div >

  < / div >

  <! - this will make the vertical alignment - >

  < img alt = "Loading"... "src="Images/loading.gif"/ >

  < / div >

  < div class = "row" >

  < div class = 'col-md-3 columnleft' >

  < div class = "row" >

  < div class = "col-md-12" >

  < h6 >

  RESULTS:

  < select id = "resultRange" >

  < option value = "100" >

  100

  < / option >

  < option value = "200" >

  200

  < / option >

  < option value = "500" >

  500

  < / option >

  < option value = "1000" >

  1000

  < / option >

  < option value = "2000" >

  2000

  < / option >

  < option value = "3000" >

  3000

  < / option >

  < option value = "4000" >

  4000

  < / option >

  < option value = "5000" >

  5000

  < / option >

  < / select >

  < / h6 >

  < / div >

  < / div >

  < / div >

  < / div >

  < / div >

  < / body >

  < / html >

  Furthermore, I have tried your code snippet. If you look at the screenshot below, the code correctly collapses.

  

  And it is not to collapse the code below that. If you close a parent tag, then the subtags will also close.

  Kind regards

  Anit Kumar