Illustrator CC: Error loading the sample plugins

Similar Questions

• Cannot connect - error loading the database...

  Hello

  Since last night find it me impossible to log in on my Skype.

  He puts me "error loading the database. Skype." It is possible that another instance of Skype to use it.

  I have reinstalled Skype, restart my pc, close all programs that could use it.

  My husband get a leverage son skpe without pb so it comes well d a pb with my nickname... going to Word of the change back I. Despite all this, I still have the same message that appears! 1

  did anyone have the same pb? and how he made it?

  Please pour your help!

  Rrbonjour

  so I did well the manip: Task Manager, process shutdown Skype.

  then relaunch the application, but it gives me the same result...

  I made a new system more earlier but it's restore gives me the same result...

  I asked a third person open my account on another pc and ca works... so it just my pc, not a hacking, (already it reassures me!)

  My spouse does so well to open Skype with his nickname but I still nothing.

  Application rattachee a Skype name can she used Lun?

• "error loading the c:\ProgramFiles\CommonFiles\parentoLogic\UUS2\UUS.dll module is not found" I'm cluelss and generally ignore this message. Should I try hard or leave?

  Original title: error loading the c:\ProgramFiles\CommonFiles\parentoLogic\UUS2\UUS.dll module could not be found

  I'm cluelss and generally ignore this message. Should I try hard or leave?

  Thank you

  This link may be a little more useful:

  http://www.utilitysoftwarereviews.com/how-to-remove-ParetoLogic-uusdll-error-message/

• Receiver error message: "error loading the TCP MIB library" when you try to configure a network printer on Windows 7.

  I can't find the answer anywhere else online. I get the error message: "error loading the TCP MIB library" when you try to configure a network of Xerox on Windows 7 printer.

  Steps to follow:
  (1) install the drivers
  (2) add printer > local printer > create a new Port > Standard TCP/IP / IP address
  (3) error message

  Can test the printer.
  Others may use the printer at the same IP address.

  Any other suggestions?
  Thank you!
  Angie

  Can be caused by corrupted files win7 or third parties who have replaced the ones win7

  (for example, ntprint.dll, tcpmib.dll, mgmtapi.dll, smmpapi.dll)

  Maybe run scanow, the System File Checker

• Why CS5 won't load the samples?

  For the life of me, I can't understand why CS5 (7.0.4). Swatches (Mac OSX10.7.5) refuse to open in the drop down below in the swatch Panel, and even when I try "to open all documents" I get an error message saying that my file is either corrupt or something. I tried exporting to IDML and re-opening as a new document. Tried twice. Failed. Then, as a solution, has opened a new color and loaded with all the nuances (not coated) (by selecting in the colors window, and then hit OK). But ID see them as hundreds of spot like colours actually occupying the document, so declinging to perform certain functions of rendering.

  Why can I I have not simply open/load any file of swatch in an existing document? As a side note, extensions load into the application on opening of NOT wearing the 7.0.4 version number, but 7.0.0. Help?

  If you can collect the samples you want in a single file in Illustrator, you can save them as .ase. Put you find almost anywhere convenient, and then you can load in ID. As I mentioned, however, ID do not have more than 10 tones and warn you, if the memories are good, that it cannot restore the colors accurately on the screen.

• How to deploy the sample plugins

  Hello

  I am new to Oracle Enterprise Manager. I had the running configuration. Now, I want to deploy plugins available under samples. Can someone tell me the process of doing the same thing. Although there is a readme.txt file that has some instructions, I find that that the instructions are probably incomplete, he talks about the emcli that I had to download and install. Can someone help me generate and deploy the plugins in the OEM and to see how they work or direct me to the proper documentation.

  Finally I have successfully create archive of the plugin:

  Here are the steps I followed:

  • Log in as user oracle
  • Download the configuration-> extensibility CDIP-> Development Kit and unzip archive zip under the same user credentials
  • If it happens to be another user you will end up with the same questions as above (and you will have no clue about the similar error than me).
  • Set the JDK JAVA_HOME
  • Follow in the footsteps of files to copy as stated in the README file of the example that you want to run create_plugin on
  • Now, go to the bin of the CDIP directory and run the command

  . / empdk create_plugin-stage_dir /samples/plugins/HostSample/demo_hostsample/stage /-conn_desc : 1521: - repos_user sysman-repos_pwd - out_dir construction

  And the Archives of the INTERNET are created. Hope this helps for those who encounter similar problems.

• «RUNDLL error loading the C:\...» "at startup

  Start Up and as I get load of icons on the desktop: "RUNDLL error loading C:\Documents and Settings\Ralph\Local Settings\Application Data\compatCommsdlg\uniMainTask.dll the specified module is not found."

  I have XP SP3.  I understand that vaguely that a dll file has something to do with an application.  All programs loading and I seem to be able to use all the programs but I must first click 'OK' to the message acknowledgew to continue.  (1) what is the error?  (2) what program he claims? ((3) how do necessary file or, if not necessary, 4) how can I get rid of the error?

  Looking for errors like this by doing a search on Google for the name of the file.  Usually, they turn up without success.

  When a search in no hits or suspicious hits result, the answer is usually that the file in question is linked to the malicious software and your anti-malware application has deleted or quarantined file, but left to the Windows registry entry that tries to start the malicious software when you start your computer.

  In your case, there is no success for uniMainTask.dll, but the file name is not typical of the random letters used for malware, so it may indeed be a legitimate application-related.  However, you should treat it similarly.

  First of all, download, install, update and run full scans with two of these free analytical tools:

  MalwareBytes AntiMalware
  SUPERAntiSpyware

  Do not run the scans at the same time.  They can take some time, so start an and then go for a non computer chore for awhile.

  If the scans does not solve the problem (and they can't, because the actual malware file has already been processed), then download and run Autoruns.  Click on the "Connection" tab and look in the column 'Image path' for the dll named in your error message.  If it is not displayed in the connection tab, click the "all" tab and use the file > search tool.  A characteristic of the search of Autoruns tool is that you must move the selection under the element line "found" before you "Find Next."

  Once you find the line with the file in question, either "delete" or (if you want to be safer) uncheck the box.  The latter prevents the line running, but you can reactivate it later by removing the check mark.

  Look at the line Autoruns including uniMainTask.dll of clues about what application it can relate to. If it relates to a legitimate request, you may need to reinstall this application.

• 6259 analog integrated Output error with the sample clock

  I run into some problems outputing a sinusoid of analog output with my acquisition of data using the sampleclock aboard. At one point, I was able to get the vi works pretty good and repeatable. When revisited however, I started to see error that the driver could not provide the unit with the points quickly. I was running at 250 k 1 k sampling rate a tone to one, but it seems only to be able to get about 20 k, sampling frequency. This creates a pretty rough signal, expecially when the rate fell to 8 k. I produce only 1 second of data.

  See attached bmp. The I/O moved references aren't channels of tasks. Could be the problem? I'm a little frustrated because he has to be a very simple to create vi and I'm having all sorts of problems with it.

  Hi klessm1,

  I want to stress that the behavior you're seeing is atypical - under normal circumstances, DMA transfers must take place fast enough to keep the data in the FIFO embedded permanently until at least the max (2.86 MHz single channel) sampling rate.  After saying that the error you receive indicates that we get no data for the 6259 fast enough for some reason - there are a few options at this point, it should get you operational:

  Remove the need to transfer data to the device.  As Sarah suggested, you can do so by regenerating the on-board FIFO.  The FIFO output on the 6259 is 8 191 samples (shared between the channels), so if you build a periodic signal and this is a sufficient number of samples to characterize a period then this should be a viable option.

  Try using interrupts instead of DMA.  This may seem paradoxical since DMA is generally the fastest method of data transfer on our DAQ hardware, but something rings the Bell with the DMA transfer from your computer to the 6259.  I imagine that you will actually have a faster rate using interrupts if that is the case.

  You can configure the appliance to use only the quantity of memory onboard or interruptions using a channel property node DAQmx (Analog Output > General Properties > advanced > memory and data transfer)

  Implement a delay between the start of the task and the first sample.  If the problem is with the first DMA transfer latency (and not the total throughput on the PCI bus), then adding a delay before attempting to write the first sample should solve the problem.  Some motherboards have been found to have a latency higher than the others (so the question of Sarah #3).

  You can configure the delay with the property node Trigger DAQmx (start > more > Delay / delay units).  This applies even if you do not explicitly have a configured start trigger.

  I think the three above are good ideas to try depending on what you need exactly.  I would also check for updates to the BIOS available for your motherboard that could address the issue (but it would be something that the manufacturer would be more known).  I hope this help - made - know us how it goes!

  -John

• There was an error loading the library of license?

  Hi guru,.

  I received an error when I have provided a valid license to show the connection to the server.

  In the window 'Edit license', I have a valid license of entry, but got an error message saying «Error loading library license» (The original error message is in Chinese and I translated it into English, so I'm not sure that the words are exactly the same as in the English version).

  It looks like something wrong before that the login server check the licesen. If the license is really invalid, the error message should be as "the license is invalid" instead of «Error loading library license» I got the error "invalid license" before but never encountered the message "load error".

  Any suggestion? Thank you!

  It is to see the version 5.2

  I've corrected this error by reinstalling the connection to the server.

• Error installing the Eclipse plugin

  Hi, I am installing the Eclipse plugin for VMware Studio. First of all, I downloaded Eclipse 3.5 and when that does not work I downloaded 3.4, but I'm having the same problem with 3.4 I had with 3.5. I'm just following the instructions posted here:

  http://www.VMware.com/support/Developer/Studio/studio20/eclipse_plugin.html

  I managed to step 3, when I click on install in step 4, I get a warning:

  «Maybe the software you selected is not valid with your current installation.» You want to open the wizard in any case to review the selections? »

  I click Yes and a new window opens that says "cannot complete the request. See details»

  Details:

  Cannot complete the request.  See the details.

  Unsatisfied dependency: http://com.vmware.studio.eclipse.feature.group 2.0.0.1017 - 185256 requiredCapability: org.eclipse.equinox.p2.iu/org.eclipse.wst.xml_ui.feature.feature.group/0.0.0

  Unsatisfied dependency: http://com.vmware.studio.eclipse.feature.group 2.0.0.1017 - 185256 requiredCapability: org.eclipse.equinox.p2.iu/org.eclipse.wst.xml_ui.feature.feature.group/0.0.0

  No one knows what that is this dependence and how can I solve this problem?

  Thank you!!

  Make sure that the proxy server can be reached.

  After installation, restart your eclipse.

  I recommend try first on Eclipse 3.4

• my laptop does not start and gives me the error, load the required DLLs for kernal

  When I went to start my computer would not start and just says load needed DLLs for kernal and communicate with my support. I don't know what the problem is or how to fix it. It was working fine when I finally stopped him. any help is greatly appreciated

  Hello

  Method 1: Please follow the steps mentioned in the article mentioned below:
  Error Messages When you start your computer if Program Files of Windows are missing or damaged:
  http://support.Microsoft.com/kb/812450

  Method 2: How to perform an upgrade on the spot (reinstallation) of Windows XP:
  http://support.Microsoft.com/kb/978788
  Note: This could result in a loss of data on your computer; It is recommended that you back up all important data on the computer before performing this operation.

• ODI: Error loading the data of HFM: invalid dimension name

  Hello
  
  I am fairly new to ODI and I was wondering if any guru could help me overcome a question im facing. I try to load data from a csv file in HFM. I chose the good KM (LKM file SQL and SQL IKM to Hyperion Financial Management Data), with the Sunopsis Memory engine than the staging area.
  
  To facilitate the file csv has the exact structure as well as the dimensions of HFM applications and has been located in the interface, as shown below:
  
  Column of the source - target HFM column file
  
  -Scenario
  Year - year
  Display - display
  Entity - entity
  Value - value
  Account - account
  PIC - PIC
  CUSTOM1 - Custom1
  CUSTOM2 - Custom2
  Custom3 - Custom3
  Custom4 - Custom4
  -Period
  DataValue - Datavalue
  -Description (no column of the source, mapped as ")
  
  The csv file contains basic members only. I set the error log file path, and when running the interface I get an error. When I open the error log, I see the following messages:
  
  Line: 1, error: invalid dimension name
  ! Column_Order = C1_SCENARIO, C2_YEAR, C3_VIEW, C4_ENTITY, C5_VALUE, C6_ACCOUNT, C7_ICP, C8_CUSTOM1, C9_CUSTOM2, C10_CUSTOM3, C11_CUSTOM4, C12_PERIOD, C13_DATAVALUE

  C1_SCENARIO

  line: 3 error: a valid column order is not specified.
  Actual; 2007; YTD; 20043; < entity currency >; 13040; [ICP no]; [None]; 1000; [None]; [None]; Jan; 512000; » »
  > > > > > >
  
  
  
  I'm not sure how to solve, as it is based on the interface mapping match dimensions on a 1:1 basis. In addition, dimension in the target column names correspond to the dimension names of application of HFM (that this application has been deducted).
  
  Help, please!
  
  Thank you very much
  Jorge
  
  Published by: 993020 on March 11, 2013 05:06

  Dear Experts,

  ODI: 11.1.1.6.0
  HFM: 9.3.3

  I also met a similar error as OP.

  In my case, the error occurs when I use SUNOPSIS_MEMORY_ENGINE as the staging. If I simply change this staging to the Oracle schema, the Interface will load data successfully to HFM. So, I'm curious on what cause the SUNOPSIS cannot become the staging for the loading of HFM.

  This will show in the IKM SQL to the FM data log file:

  Load data started: 3/14/2013 13:41:11.
  Line: 1, Error: Invalid dimension name
  !Column_Order = C1_SCENARIO, C2_YEAR, C3_VIEW, C4_ENTITY, C5_VALUE, C6_ACCOUNT, C7_ICP, C8_PRODUCT, C9_CUSTOMERS, C10_CHANNEL, C11_UNITSFLOWS, C12_PERIOD, C13_DESCRIPTION
  
  

  C1_SCENARIO

  
  Line: 3, Error: A valid column order is not specified.
  Actual;2007;YTD;EastSales;;Sales;[ICP None];Comma_PDAs;Electronic_City;National_Accts;[None];February;;555
  >>>>>>
  
  Load data completed: 3/14/2013 13:41:11.
  

  It seems like the query generated is not picking up the Column Alias name, but this only happens if I use SUNOPSIS_MEMORY_ENGINE as the staging. With Oracle schema as staging, data load is successfully finished.

  This is the generated code from the KM

  Prepare for Loading (Using Oracle as Staging)

  from java.util import HashMap
  from java.lang import Boolean
  from java.lang import Integer
  from com.hyperion.odi.common import ODIConstants
  from com.hyperion.odi.hfm import ODIHFMConstants
  from com.hyperion.odi.connection import HypAppConnectionFactory
  
  # Target HFM connection properties
  clusterName   = "demo92"
  userName      = "admin"
  password      =  "<@=snpRef.getInfo("DEST_PASS") @>"
  application   = "COMMA"
  
  targetProps = HashMap()
  targetProps.put(ODIConstants.SERVER,clusterName)
  targetProps.put(ODIConstants.USER,userName)
  targetProps.put(ODIConstants.PASSWORD,password)
  targetProps.put(ODIConstants.APPLICATION_NAME,application)
  
  # Load options
  consolidateOnly    = 0
  importMode            = "Merge"
  accumulateWithinFile  = 0
  fileContainsShareData = 0
  consolidateAfterLoad  = 0
  consolidateParameters = ""
  logEnabled             = 1
  logFileName           = r"C:\Temp\ODI_HFM_Load.log"
  tableName             = r"HFMData"
  columnMap            = 'SCENARIO=Scenario , YEAR=Year , VIEW=View , ENTITY=Entity , VALUE=Value , ACCOUNT=Account , ICP=ICP , PRODUCT=Product , CUSTOMERS=Customers , CHANNEL=Channel , UNITSFLOWS=UnitsFlows , PERIOD=Period , DATAVALUE=DataValue , DESCRIPTION=Description '
  srcQuery= """select   C1_SCENARIO    "Scenario",C2_YEAR    "Year",C3_VIEW    "View",C4_ENTITY    "Entity",C5_VALUE    "Value",C6_ACCOUNT    "Account",C7_ICP    "ICP",C8_PRODUCT    "Product",C9_CUSTOMERS    "Customers",C10_CHANNEL    "Channel",C11_UNITSFLOWS    "UnitsFlows",C12_PERIOD    "Period",555    "DataValue",C13_DESCRIPTION    "Description" from ODI_TMP."C$_0HFMData"  where      (1=1)     """
  srcCx                    = odiRef.getJDBCConnection("SRC")
  srcQueryFetchSize=30
  
  loadOptions = HashMap()
  loadOptions.put(ODIHFMConstants.OPTIONS_NAME_IKMDATA_CONSOLIDATEONLY, Boolean(consolidateOnly))
  loadOptions.put(ODIHFMConstants.OPTIONS_NAME_IKMDATA_IMPORTMODE, importMode)
  loadOptions.put(ODIHFMConstants.OPTIONS_NAME_IKMDATA_ACCUMULATEWITHINFILE, Boolean(accumulateWithinFile))
  loadOptions.put(ODIHFMConstants.OPTIONS_NAME_IKMDATA_FILECONTAINSSHAREDATA, Boolean(fileContainsShareData))
  loadOptions.put(ODIHFMConstants.OPTIONS_NAME_IKMDATA_CONSOLIDATEAFTERLOAD, Boolean(consolidateAfterLoad))
  loadOptions.put(ODIHFMConstants.OPTIONS_NAME_IKMDATA_CONSOLIDATEPARAMS, consolidateParameters)
  loadOptions.put(ODIConstants.LOG_ENABLED, Boolean(logEnabled))
  loadOptions.put(ODIConstants.LOG_FILE_NAME, logFileName)
  loadOptions.put(ODIHFMConstants.OPTIONS_NAME_TABLENAME, tableName);
  loadOptions.put(ODIHFMConstants.OPTIONS_NAME_COLUMNMAP, columnMap);
  loadOptions.put(ODIHFMConstants.OPTIONS_NAME_SOURCECONNECTION, srcCx);
  loadOptions.put(ODIHFMConstants.OPTIONS_NAME_SOURCEQUERY, srcQuery);
  loadOptions.put(ODIHFMConstants.OPTIONS_NAME_SOURCEQUERYFETCHSIZE, Integer(srcQueryFetchSize));
  
  # Get the writer
  hfmWriter = HypAppConnectionFactory.getAppWriter(HypAppConnectionFactory.APP_HFM, targetProps);
  
  # Begin load
  hfmWriter.beginLoad(loadOptions)
  

  Prepare for loading (using SUNOPSIS as staging)

  from java.util import HashMap
  from java.lang import Boolean
  from java.lang import Integer
  from com.hyperion.odi.common import ODIConstants
  from com.hyperion.odi.hfm import ODIHFMConstants
  from com.hyperion.odi.connection import HypAppConnectionFactory
  
  # Target HFM connection properties
  clusterName   = "demo92"
  userName      = "admin"
  password      =  "<@=snpRef.getInfo("DEST_PASS") @>"
  application   = "COMMA"
  
  targetProps = HashMap()
  targetProps.put(ODIConstants.SERVER,clusterName)
  targetProps.put(ODIConstants.USER,userName)
  targetProps.put(ODIConstants.PASSWORD,password)
  targetProps.put(ODIConstants.APPLICATION_NAME,application)
  
  # Load options
  consolidateOnly    = 0
  importMode            = "Merge"
  accumulateWithinFile  = 0
  fileContainsShareData = 0
  consolidateAfterLoad  = 0
  consolidateParameters = ""
  logEnabled             = 1
  logFileName           = r"C:\Temp\ODI_HFM_Load.log"
  tableName             = r"HFMData"
  columnMap            = 'SCENARIO=Scenario , YEAR=Year , VIEW=View , ENTITY=Entity , VALUE=Value , ACCOUNT=Account , ICP=ICP , PRODUCT=Product , CUSTOMERS=Customers , CHANNEL=Channel , UNITSFLOWS=UnitsFlows , PERIOD=Period , DATAVALUE=DataValue , DESCRIPTION=Description '
  srcQuery= """select   C1_SCENARIO    "Scenario",C2_YEAR    "Year",C3_VIEW    "View",C4_ENTITY    "Entity",C5_VALUE    "Value",C6_ACCOUNT    "Account",C7_ICP    "ICP",C8_PRODUCT    "Product",C9_CUSTOMERS    "Customers",C10_CHANNEL    "Channel",C11_UNITSFLOWS    "UnitsFlows",C12_PERIOD    "Period",555    "DataValue",C13_DESCRIPTION    "Description" from "C$_0HFMData"  where      (1=1)     """
  srcCx                    = odiRef.getJDBCConnection("SRC")
  srcQueryFetchSize=30
  
  loadOptions = HashMap()
  loadOptions.put(ODIHFMConstants.OPTIONS_NAME_IKMDATA_CONSOLIDATEONLY, Boolean(consolidateOnly))
  loadOptions.put(ODIHFMConstants.OPTIONS_NAME_IKMDATA_IMPORTMODE, importMode)
  loadOptions.put(ODIHFMConstants.OPTIONS_NAME_IKMDATA_ACCUMULATEWITHINFILE, Boolean(accumulateWithinFile))
  loadOptions.put(ODIHFMConstants.OPTIONS_NAME_IKMDATA_FILECONTAINSSHAREDATA, Boolean(fileContainsShareData))
  loadOptions.put(ODIHFMConstants.OPTIONS_NAME_IKMDATA_CONSOLIDATEAFTERLOAD, Boolean(consolidateAfterLoad))
  loadOptions.put(ODIHFMConstants.OPTIONS_NAME_IKMDATA_CONSOLIDATEPARAMS, consolidateParameters)
  loadOptions.put(ODIConstants.LOG_ENABLED, Boolean(logEnabled))
  loadOptions.put(ODIConstants.LOG_FILE_NAME, logFileName)
  loadOptions.put(ODIHFMConstants.OPTIONS_NAME_TABLENAME, tableName);
  loadOptions.put(ODIHFMConstants.OPTIONS_NAME_COLUMNMAP, columnMap);
  loadOptions.put(ODIHFMConstants.OPTIONS_NAME_SOURCECONNECTION, srcCx);
  loadOptions.put(ODIHFMConstants.OPTIONS_NAME_SOURCEQUERY, srcQuery);
  loadOptions.put(ODIHFMConstants.OPTIONS_NAME_SOURCEQUERYFETCHSIZE, Integer(srcQueryFetchSize));
  
  # Get the writer
  hfmWriter = HypAppConnectionFactory.getAppWriter(HypAppConnectionFactory.APP_HFM, targetProps);
  
  # Begin load
  hfmWriter.beginLoad(loadOptions)
  

  If anyone can help on how to solve this?

  Thank you

  Published by: user10620897 on March 14, 2013 14:28

• 25.0.1(Linux, x 64) Firefox cannot load the flash plugins, how to just outside?

  I use fedora 18 x 64 in which 21 firefox is installed. I followed the instructions to install a flash player plugin.
  1. download adobe install_flash_player_11_linux.x86_64.tgz
  2 unzip it and get libflashplayer.so.
  3. copy libflashplayer.so in usr
  After these steps, I still not find flash in "tool/Addons.
  I also tried to copy libflashplayer.so to ~/.mozilla/plugins, still useless.
  Most of my addons of firefox is installed in the directory "~ /.mozilla/firefox/shtlbi8m.default".

  I have downloaded fireforx 25.01 (the original firefox is not uninstalled), this problem still exists.

  You have a 32-bit version or 64-bit Firefox?

  When you have a 32-bit version of Firefox then you need 32-bit versions of plugins and place ina place where Firefox can be found.

  • http://KB.mozillazine.org/Determining_plugin_directory_on_Linux
  • https://developer.Mozilla.org/en/Gecko_Plugin_API_Reference/plug-in_Basics#How_Gecko_finds_plug-ins

• RunDll error loading the specified Module could not be found (C:\Dan\AppData\Local\ngrfry.dll)

  Every time I restart my PC, I was above error... Then when I try and download the toolbar from Road runner, I get this (windows cannot access the specified device, path or file. You don't have permission from the appropriate permissions to access the item)

  C;\users\Dan\AppData\local\Temp\GLF391~1.exe

  Please, can someone help me with this... Thank you...

  Hello

  To remove the error message if still there after the controls above to malware.

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  Autoruns - free - see what programs are configured so that it starts automatically when
  your system boots and you connect. Autoruns also shows you the complete list of the registry
  and where applications can configure Auto-start for the files settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  I hope this helps.

• Error loading the external table

  I encounter an error.
  
  IAF.txt:
  
  "02T001427T04206"-1
  '478081' 12
  '131379' 200
  "158125"-100
  '152040'-800
  "151112"-4
  '481990'-5
  "150389"-300
  "481136" 3
  
  
  CREATE OR REPLACE DIRECTORY IAF_log_dir
  LIKE 'c:\dataformats\logs\IAF\log ';
  CREATE OR REPLACE DIRECTORY IAF_bad_dir
  LIKE 'c:\dataformats\logs\IAF\bad ';
  create table ext_IAF_table)
  item_no varchar2 (15).
  integer quantity
  )
  external organization
  (
  type oracle_loader
  default directory user_dir
  access settings
  (
  records delimited by newline
  FIELDS TERMINATED BY WHITESPACE EVENTUALLY SURROUNDED "" "
  BadFile IAF_bad_dir:'IAF%a_%p.bad'
  logfile IAF_log_dir:'IAF%a_%p.log'
  fields
  (
  item_no char (15),
  external quantity integer
  )
  )
  location ("IAF.txt")
  )
  reject limit unlimited;
  
  
  SQL > select * from ext_iaf_table;
  Select * from ext_iaf_table
  *
  ERROR on line 1:
  ORA-29913: error in executing ODCIEXTTABLEOPEN legend
  ORA-29400: data cartridge error
  KUP-00554: error occurred when parsing the access settings
  KUP-01005: syntax error: found "badfile": waiting for an of: "and in the column, (,»
  LTrim lrtrim, ldrtrim, lack, notrim, rtrim, reject.
  KUP-01007: line 3, column 1