iMac with flickering of the screen crash

Similar Questions

• Everytime I open Firefox 29.0.1 I get the screen crash report why

  Everytime I open Firefox 29.0.1 I Get the screen crash report I want to restore the tabs, as far as I know that Firefox crashed. This started after I upgraded to Ver 29.0.1

  Rather than do a uninstall complete, you can try this:

  Create a new Firefox profile

  A new profile will be your plugins installed by system (for example, Flash) and extensions (e.g., security suite toolbars), but no themes, other extensions or other customizations. It should also have databases of completely fresh settings and cool a cache folder.

  Out of Firefox and start in the profile using Start Manager > Search box (or run):

  firefox.exe -P
  

  Any time want to switch profiles, exit Firefox and return to this dialog box.

  Click on the button create a profile. I recommend using the default location suggested, in other words, do not click the button to choose a different folder. Then launch Firefox in the new profile that you have created.

  If you browse around, exit, reboot, etc, the problem continues?

  When you return to the Profile Manager to return to your normal profile, you might be tempted to use the button to delete the profile. It's a little too easy to accidentally delete your 'real' profile, so I recommend you to resist the temptation. If you don't want to clean up later, I suggest to make a backup of all your profiles first in case something go wrong.

• Reinstall the Windows XP with SP3 causes flickering on the screen

  Hello

  I recently reinstalled Windows XP SP 3 on my laptop. After installation, I started to notice that the screen flashes when I try to move or down in windows Explorer or even browsers. I thought that it could be linked to the frequency of the screen refresh.

  I noticed that refresh is set to "default to the setting material" and it gives me no option to change to 60 htz.

  can someone help me figure this out?

  
  

  You probably need to update driver for video (monitor) card. Or simply you need set the appropriate (through software coming with driver) discount rate.

  Optional: You can also customize some parameters of performance (uncheck the display contents of windows slides & lala).

• Using an iMac with BootCamp as a screen of a Windows computer?

  Hey everybody,

  I was wondering if it is possible to use an iMac with BootCamp installed as a screen for a Windows laptop. If so, is there something I should know about the complexity of this solution and its sensitivity to errors etc. ?

  Or, assuming that it does not work, does anyone know alternatives (Parallels very probably wouldn't be enough in my case)?

  Thank you

  target display mode only works with the Mac and only in osx

  You can try to search for solutions as air display of avertron he should leave a device act as wireless for another device monitor

  I want to make my iPad works as a monitor, it works in OS X and windows

• Flickering of the screen, screen goes black at the beginning to the top or re boot

  I have a problem with the screen flickering at first upward. (Computer Toshiba satellite laptop) I start the computer and once windows starts to load I immediately encounter a flickering (somewhat like a light bulb which is about to release) the screen flashes and then goes to black... I have so stop and keep trying to re-start. After 25 + times it finally it loads correctly. This may take 20 to 30 minutes each time it happens... which is usually every morning when I get up and turn on your computer! I searched on the web and see many other people having the same problem, but have not yet found a solution.

  There have only been a time it happened when I wasn't initially upwards... regularly, he was initially upwards... once my login screen happens, I get my password and the programs loading - I have no flicker. Can someone please tell me what is the problem and how to fix it? I limited the computer knows how... step by step instructions would be greatly appreciated.

  Hello

  Maybe something at the start is the origin of the problem, but you might need a real computer store (no leeks
  and bed at BestBuy or a BigBox store) or Support from Toshiba and you can view their known forums
  questions.

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  Autoruns - free - see what programs are configured to startup automatically when your system boots and you
  opening of session. Autoruns also shows you the full list of registry and file locations where applications can configure auto-
  start the settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  =========================================

  Also do to the General corruption of cleaning and repair/replace damaged/missing system files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Check for any errors in the log, however run CheckDisk anyway.

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ---------------------------------------------------------------------------

  Toshiba - Forums
  http://laptopforums.Toshiba.com/

  Toshiba - Contacts
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contact

  Toshiba - drivers - access your model
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

  Toshiba - Support
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Shake/flickering of the screen.

  Since I bought my new computer, the screen flickers or shakes annoyingly. It happens only if I'm only on my desk, nothing doing, but if I start using Google Chrome for example, the screen begins to blink a lot, it becomes even more intense if I watch a video.

  Luckily I found a temporary solution for this: let my computer go on screen saver. The screen stops flashing for as long I have my power supply of the computer on (even if I put it on sleep), but if I shut down or restart my computer, I have to wait again, screen saver to correct flicker.

  Have to wait for my computer go to the screensaver really bothers me whenever I turn it on even if I put the screen saver timeout for only 1 minute.

  I'm suspecting that it is caused by my graphics card, but not quite sure. I tried with another monitor, but it still happens, so it's not caused by my monitor.

  I have Windows 7 with ATI Sapphire Radeon HD 6870. My monitor is LG IPS225.

  Is this a known problem and is there a solution permanent for this?

  EDIT: My screen is off, do not go on the screen saver.

  Control Panel-> hardware and sound-> power-> Settings.This of Plan Options change are where I change the timer to 1 min when I turned on my computer and then change again to where I normally keep it's 10 min.

  First, turn off and unplug all cables from your PC.  Hold the button for 7 seconds.  Open the PC.  Remove the video card and reinsert it firmly.  Make sure that the cables that connecting now are correctly connected.  While you're there, you can do the same "re-Assisi" of all the plug-ins including caps and memory, hard drive controller plugs, etc.

  This could be a driver problem.  There may be an update to the driver.  Try to roll back the previous driver if it is available.

  Manager devices, right click on the ATI device, choose Properties, and then choose restore.  It is also possible that there is a newer driver available on the ATI site, which solves this problem.

  I believe that the most likely cause is your videocard itself.  Check to see if it still under warranty.  It could very well be.

  Moreover, the screen save time-out is definable.  You can even go to this place and click a button to enter this mode temporarily.

• Windows 7 laptop: occasional, power flickering of the screen

  Starting yesterday (31/07/2012), my laptop has a flicker of frankly boring and occasional screen. At first, it was just the refresh rate being turned down to 40 hertz, for some strange reason. However, it is now at 60 hertz, can go no higher and still has the annoying flicker of 40 hertz.

  When the blinking begins, it is not really noticeable, especially when the display shows a blank page or something, but it is much more sensitive when I flip to something that consists of darker colors or more lines. Twinkle isn't the white flashing screen, it's really more like someone decided to throw switch rage of light with every odd row of the rear lights.
  What is more, it's twinkle isn't always there. Sometimes, the functions of the screen perfectly, other times, I opened it and it flashes.
  The laptop is a Latitude E6410. The card is a NVIDIA NVS 3100 M. I recently installed a driver for Quadro performance from their site since my laptop had difficult games (1 fps isn't good!).
  So, really, the main question is "do I have to install another update, or do I have to get the repaired screen?".
  Thank you for your time.
  Note: whenever the flickering starts, I shut down the computer, and then open it again. After typing my password and log back in, it seems to have difficulty remembering what resolution she was worth, doing whatever it is on the screen a little bigger than what it is supposed to be for a little while.

  I turned my computer on the high performance setting, and oddly enough, Twinkle stopped (it has been in this position for a few days, flicker-free).

  I think it could have also been caused by the inability of my computer cool itself properly, a problem that I am temporarily fixing with a bag of ice and a case of pencils to tilt the computer up a little bit. The permanent solution is coming Tuesday in the form of an additional fan.
  Thank you, you all for taking your time to help me with this problem. Have a good morning, day or night (whatever it is there where you are).

• Toshiba KIRA-102 with dust inside the screen

  Hello

  Big disapointement! It's my 4th Toshiba (first back in 1997... and still works!)
  My Satellite M30X with 10 years (ok) and my Tecra R840 with 3 years works 24 hours a day from the last August :-)

  The las one... a 102 Kira bought las November!
  Never had this problem: a task of dust about an inch or two the upper of the screen... but inside the screen!

  Now what?
  It's really annoying because it's the perfect... Toshiba advertising ultrabook!

  Paulo

  Hello

  To be honest, I never read on the problems of dust inside the display area.
  However, the mentioned absence looks like hardware related issue with material in question must be reported to the Toshiba authorized service provider in your country.

  In my opinion you should talk to the ASP guys on this problem of dust and probably they will replace the display panel

  On this page you will find all the Toshiba ASP available worldwide:
  http://www.Toshiba.EU/innovation/generic/ASP_SUPPORT/

• Qosmio F10 begins with lines on the screen then goes black

  If anyone can help.

  I have a F10
  When I start it, I start with a line pattern funny on the screen that turns into dirrerant models.
  Then after it starts, it becomes black.
  Runns fan and the drive lights work as is it running.

  I can't get into safe mode and it starts properly and the screen does not black.

  This started with the mires funny when I move something one day and when I did a funny little slider occurred.

  Help, please

  Dave

  + I have more information. It will start and run in VGA mode. If I cange to the mode of the display screen is black.
  Could this be a display driver problem.

  If so where can I download a.

• Vertical lines flickering and the screen is not responding on my IPhone 6 more.

  My iPhone 6 Plus continues to have strange flickering gray/white vertical lines which slide down from the top of the screen on a regular basis, it does stop when I hit him in the back really hard and sometimes my iPhone screen does not, I would not be able to click on all of the apps I want and sometimes the phone would open up another application.

  Another thing is that when I pressed on the top of the screen of my iPhone, I see these white lines that are similar to there is water in which I think he does. My AppleCare expired recently and I'm afraid to go to a phone shop for repair because I don't have any knowledge about how much it will cost.

  Please help me.

  Visit an Apple Retail Store or Apple authorized service provider to check the phone. If you're lucky, the screen must be replaced if there is more internal damage, the device might have to replace:

  Pricing of the service repair screen

  Repair and replacement costs depend on your iPhone and your AppleCare products cover model. Apple runs a diagnostic test to determine if your iPhone has suffered additional damage. If she has, or if she needs more repairs, you may have to pay out-of-warranty service. Accidental damage is not covered by the Apple one-year limited warranty.

  Model	Screen repair cost
  iPhone 6	$109
  iPhone iPhone 6s 6 Plus, iPhone 5 s, iPhone 5, iPhone 5	$129
  iPhone 6 sec more	$149

  In addition, a $6.95 shipping charges if necessary. Fees are in US Dollars and exclude tax. The price is for the service through Apple. The final service charge we charge will be determined during testing. Pricing and terms vary for the service by an Apple authorized service provider.

  Out of warranty repair service

  If your repair is not covered by Apple limited one-year AppleCare warranty + or AppleCare Protection Plan, your iPhone may be eligible for out-of-warranty service. For example, the liquid damage is not covered by the warranty, but may be eligible for out-of-warranty service. Some damage is not eligible, for example, if your device has been broken into several pieces. See the terms of repair of Apple and Conditions for more details.
  Read the terms of Apple repair

  Model	Out-of-warranty service fee	Battery service *
  iPhone 6 s more, iPhone 6 Plus	$329	$79 * available only if battery Apple diagnostic test failure
  iPhone iPhone 6s 6	$299
  iPhone 5, iPhone 5, iPhone 5	$269
  iPhone 4S	$199
  iPhone 4, iPhone 3GS, iPhone 3G	$149

  In addition, a $6.95 shipping charges if necessary. Fees are in US Dollars and exclude tax. The price is for the service through Apple. The final service charge we charge will be determined during the tests and may be less than the costs of service above. Pricing and terms vary for the service by an Apple authorized service provider.

  Off-warranty price varies for Apple accessories such as adapters and cases for Apple iPhone. For more information, contact your operator, Apple or an Apple authorized service provider.

  copied from answer Service Center - iPhone

• XPS One 2710 flickering of the screen

  My XPS One 2710 has worked great for over a year. This week, it began to falter on exactly half of the screen on the right side. The Twinkle is quite violent and makes this unusable side. I have updated all drivers and made diagnoses who have shown no failures. My BIOS is A09. I think that it is suitable for a machine running Windows 7. Any ideas?

  Thanks for posting.  A friend asked me to take a look at its XPS 2710, and it was indeed the problem.  The symptoms were exactly as described in the previous posts.  I took off the lid in plastic and metal and blew out an industrial fan at the rear of the machine to test.  The machine is stable for two hours, which was much longer while it lasted usually.  Satisfied with my tests, I got creative with my Dremel:

  

  Using a model of fan 140mm, a spare R2 from fractal, a 140mm fan Grill and fan 3 pin USB converter I cut a hole in the lid plastic and mounted equipment (the Converter 3 pin is necessary because playing with the CPU and GPU fan headers will cause the BIOS to start a fan speed error).  Then I reassembled the entire thing without the metal under protection.  Three hours of DURATION and no problem.  Before spazzing would begin after about 20 minutes.  $30 in parts to repair a $2,000 machine.  Not bad.  Thank you once again, everybody who posted!

• Shaking furiously / flickering of the screen

  Hello everyone

  My HP laptop that I bought a year came with a vista installed.

  Occasionally, for no reason, all of the screen just started to shake like crazy. Request that never I'm working, be it IE, MS office, or simply the view of the office, every thing shakes and then stops after a few moments. Before it was casual but now occurs quite frequently. I wonder what could be the problem - hardware/vista?

  Please, can someone advise?

  Thank you
  Rehan

  Hello

  Check the HP site for a video driver updated (not the manufacturer of videocard like HP them often changes for their laptops). Download the latest version and install it after you have uninstalled the game current and rebooted (configuration/program Panel and features).

  If the problem persists, you may have a hardware problem, IE: welding/loose wiring or component misseated. If it is less than 1 year, contact HP support to protect your warranty. Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

• How to create view with tabs using the screens?

  Hello friends,

  I am aware of the view by using Manager tabs. I want to create the view tab by using the display instead of Manager.

  What is someone is aware of this kind of stuff?

  Thank you

  Salvi Alexander

  and what made features screen offer Manager does not offer?
  I've set up a couple of tabs, but it would be difficult to do with several screens.

  the advantage of using managers, is that you have a single control bar. If you use multiple screens each would need an instance of the command bar, you have to take care that they all display the same status and management of the screen would be difficult.

• Key challenges of chroma with areas of the screen no green images

  Hi all

  I have a small studio space, so when I have green screen, I always try to do shots I can't answer very well. The most recent example are these shots of my subject by behind. I move the camera more near the end of shooting.

  As you can see in these images, I captured content beyond the borders of the green screen.

  

  And I'm zooming, so before the end of shooting, it is looking like this:

  

  No matter what I try (rotation of the pen, mask, Matt track tool) I can not understand how to deal with this photo. Roto pen doesn't let me keep green all about my topic. What I'm trying to expand the selection (roto border isn't clean - it is the cut in the edges all around):

  

  .. .unhelpfully expands my selection completely to the edge of the screen. If I just disregard his right shoulder by millimeters, I get this:

  

  This sequence is of course far from ideal, but I can't understand this. I spent hours trying different things without success.

  All I'm trying to do is capture my subject with a bit of the green screen still around it, so I can remove that in a later step and have the images of the intact object with a transparent background.

  If I'm following Matt up, the selected area becomes my background, instead of being always about me. It is a task in the form of subject from my background, lol.

  Can anyone here feel sorry for this newb and guide me through what an expert can perform to process these images and crop the area of non-green screen images?

  Thank you

  Bill

  Approach quite wrong. Before composing the images and inside the demo clip away anything outside the green screen using a mask base. Then try to extract a specific string based on the green (effects of use layers or the old base, Keylight not masking effects!) and refine the result using other effects, then apply it as a cache.

  Mylenium

• Problems with Photoshop CS5 - the screen turns black

  In the last days I had serious problems with my Photoshop CS5. It works on a MacBook Pro, Mac OS X 10.6.8

  While a simple example using the stamp tool or by increasing the size of the canvas of my screen suddenly goes black and I have to restart my laptop. This had been past about 7 times consecutively a few days that the screen would go black after a few minutes of working on the photo. This has never happened before, so I am quiet worried...

  Interestingly, when I'm working on InDesign CS5 and Illustrator CS5 no such thing happens, it is only on Photoshop.

  What should I do? Help!

  Hello

  Greetings!

  Go to preferences and uncheck the enable OpenGL GPU settings running.

  Restart photoshop and try again.

  In addition, it seems to be a broken video driver or the number of the monitor.

  Concerning

  Jitendra