Qosmio F10 begins with lines on the screen then goes black

Similar Questions

• Qosmio G15: Green vertical lines on the screen

  All started an ordinary day, when I was playing music on my iTunes.
  All of a sudden my screen went black and the music stopped, but my power button is always blue. Since then, whenever I try to start it, it goes on the Qosmio screen and Windows XP screen and plays the startup sound, but there all those green vertical lines on the screen. And then it goes black and tsays in this way.

  I was able to use Windows VGA (whatever that means) with lines all over the screen, but I am not able to start normally. Does anyone have any suggestions or have had the same problem? Please help me!
  I have a Toshiba G15 Windows XP Media Center, but am not able to use it normally.

  -Alexis

  Hello

  You can enter operating system in SafeMode using F8 t the beginning upward?

• Qosmio G10 has vertical lines on the screen

  I have a G10 which I use for the last 15 months since I bought it.
  However, there are now 4 vertical lines on the screen, 2 Purple (magenta?), 1 yellow and 1 cyan. Other than these lines there are no other problems, it never fell down or something like that.

  The lines are still there, they do not change in any way and are always in the same place. They appear on the screen at first power up, before the Qosmio logo lights up.

  They have not all appear at the same time, they all appeared individually in the past two months. I've seen the last of them disappear briefly, then stay on.

  I guess that my screen is dying slowly, I guess to be an expensive item.

  Any advice thrown my way would be greatly appreciated!

  I took a picture of the screen you will find at:

  http://www.imagebucket.NET/images/lldata/displaylines.jpg

  Note: the photo was taken with Media Player full screen on a black image, just to clearly show the lines)

  Hello

  I suggest you connect an external display to check if it's a graphics card or a display problem. If cela pipes appears also on the external screen then it could also be a problem with the graphics card.
  If these lines do not appear on the external display while the display of the laptop has a malfunction.
  However, this does not change your situation. I recommend you contact the Toshiba ASP to solve this problem.

• Qosmio F10-124 - pixelated, flicks in white screen, then returns to normal

  It seems that graphics hardware has failed on a pc bought in April 2005.

  This took place in stages, starting from the time when I received
  (1) an automatic download of windows updates and
  (2) and upgrade Adobe.
  In Sept 07. Don't know if it is at all related to dysfunction of screen.
  The screen is best worked intermittently, with only access is possible using the external VGA port.

  The latest display drivers Toshiba for the ADM operating system do not fix the problem.

  In the last two days pixilation occurred in various parts of the screen to the external monitor, while the laptop was just empty, until that day that the external display display my work very well. Sometimes the laptop screen deflected in life and the pixilation has recently become more widespread. Occurrences of the task force for computer laptop screen were random.

  I need to have the screen settings, such as the external monitor is a mirror of the laptop to do anything on the laptop screen.

  Restart the PC has no effect.

  Most recent symptoms are that the external display shows that the operating system has started, but there is an alignment problem causing a model to appear on the screen, and it's 'ghost '? with several iterations of all events of the screen on the entire width of the screen output. The laptop screen does not at all at the moment.

  Someone has ideas, what could have caused it, or how to fix this?

  The graphics card chip bad seems to work. Your question describes it really looks like a defect in the chip
  But please note that this is only my personal hypothesis and if you want to be 100% sure what s wrong then you will need to contact the service provider in your country for a detailed audit.

  In the worst cases, the motherboard needs to be replaced because the GPU chip is mounted on the motherboard and cannot be deleted.

• When I install FSX SP2, the box of the menu showing the plan chosen and also in the game, the graphics are all messed up (black, black with lines on the screen and so on) do not know what to do? I need help.

  I have FSX Deluxe. When I installed FSX SP1, it was all fine, but when I installed FSX SP2 graphics were messed up. So I uninstalled FSX SP2 and tried again, and it was the same thing. So I uninstalled FSX all together and reinstalled fresh and put on FSX SP1, it was going well until I put FSX SP2, the same thing happened again, messed up graphics.

  So I uninstalled FSX SP2 and updated my drivers graphic and tried again and the same thing happened.

  I need help please.
  Thank you

  Hi Mmarshall_1993,

  Welcome to the Microsoft Answers site.

  We would like to get a better understanding of this issue, so we can better help not only you but other users with similar problems.

  (a) what operating system do you use?

  Method 1:

  Adjust display settings

  Many recent Microsoft games require a card video and monitor that can run a resolution of at least 800 x 600 in color (16 bit). Set the resolution of Windows display on 800 x 600 in color (16 bit), and then test the game. To do this, follow these steps:

  1. in Windows XP, click Start, point to settings and then click Control Panel.
  In Windows Vista, click on start to reduce this includes personalization thtype in the Search box and then click on personalization in the programs list.

  2. in Windows XP, double-click display.
  In Windows Vista, click display settings.

  3. click on the settings tab.

  4. move the slider of the desktop area or screen area slider to 800 x 600 pixel definition.

  5. in the Color Palette box or in the color box, click colors (16 bit).

  6. click OK and then click OK again.

  7. click Yes to accept the setting.

  Method 2:

  Adjust graphics hardware acceleration

  To adjust graphics hardware acceleration, use the method described for the operating system that you use:

  ·         Windows Vista

  1. click on start to reduce this includes this ima, type personalization in the Start Search box, and then click personalization in the list of programs .

  2. click on display settings.

  3. click on Advanced settings.

  4. click the Troubleshooting tab, and then click change settings.

  Reduce this includes this imIf that you are prompted for an administrator password or a confirmation, type the password or click on allow.

  5. move the notches on both Hardware Acceleration slider to the left of full (the parameter disable the accelerations of cursor and bitmap ).

  6. click OK and then click restart now.

  7. once the computer has restarted, test the game.

  ·         Microsoft Windows 2000 or Windows XP

  1. click on Start, point to settings and then click Control Panel.

  2. double-click on display.

  3. on the settings tab, click Advanced.

  4. click on the Troubleshooting tab.

  5. move the notches on both Hardware Acceleration slider to the left of full (the turn off all cursor and advanced drawing accelerations setting).

  6. click OK and then click OK again.

  7. test the game.

  Method 3:

  Check or turn on Direct 3D

  To check or turn on Windows XP Direct3D acceleration, follow these steps:

  1. click on Start, click run, type dxdiag , and then click OK.

  2. on the display tab, verify that all DirectX features are enabled. If all the features are disabled, click enable next to the feature.
  Note If some DirectX features are unavailable, verify that your video card meets the minimum requirements.

  For more information, follow the below mentioned articles.

  How to resolve display issues in Microsoft games

  http://support.Microsoft.com/kb/263039

  The Flight Simulator X game display flickers and are damaged on a Windows Vista-based computer that is connected to multiple monitors

  http://support.Microsoft.com/kb/933590

  Hope this information is useful.

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• 60 HP G Series notebook PC: need help with Hp 60 G screen flickers to black then returns if repositioned screen?

  First the 8.1 update stinks.  This operating system doesn't do well with a laptop no touchscreen.  The system will not wake up after the cover is closed. I have to restart with a difficult start.  Also when I tap the screen suddenly goes black vibration and movement of the laptop itself. If I set the screen before and behind the screen back to normal. I think it's only a matter of time before this constant back and forth of movement to loosen the screen completely and more severe the wires that connect the Panel to the keyboard.  ORRRRRRRRRRRRR I'll just throw the frustration!

  Help someone!

  Katyana_89

  Your windows just install the latest graphics drivers...
  As for the screen.
  You have a defective vga cable that probably needs to be replaced

• Qosmio G10 begins with vertical lines on the screen

  Hello, can anyone help?

  When I try to start my sign qosmio G10 comes on with vertical lines on the screen. And the screen goes black and I can only hear the fan.
  In VGA mode, it begins upward, but always with the lines on the screen.
  Is there something wrong with the video card? In my view, that there are more people with this problem.
  Toshiba offered little help?

  I'm 'out out of warranty '. I need to by a new complete motherboard or y at - it another option? Replace the video card?

  Hello

  Its a shame about the warranty because you ask the service partner Toshiba for the verification of the laptop and this procedure would be free. You know, the warranty would cover the audit of the laptop.

  But I would say the external display connection and then you can check if the same vertical lines appear on the external display.
  If you see the lines on the second monitor, then I guess it could be something wrong with the graphics card or motherboard.

  I think that this procedure is the best way to find out what could be the problem, but anyway, I think you should ask a technician for assistance if you want to solve this problem.

  PS: Have you tried to reinstall or update the graphics driver? I think you should do it but I don't know if it will help you, but you know Mr. try is free ;)

  One of my friends had a similar problem with the vertical lines on other mobile manufacturing, and it was a WLan cable which was responsible for the strange lines on the screen.

• Qosmio F10: vertical lines on the screen

  I use a Qosmio F10 with a nVIDIA 128 MB graphics card. Recently while I was running a graphics-based application on, my screen started showing me wire colors on the screen. I was able to start the game once more, but found the same problem exist.

  On reboot, the system showed the vertical white lines on the screen to start qosmio, ' *' on the lines of the bios password screen and green on the Windows XP loading screen. I was not able to start Windows. Thinking it would be a problem of S/W, I formatted.

  The problem persists and I can not load Windows XP.
  Can someone tell me what the problem with my laptop?

  Hello

  This sound like a hardware malfunction and I guess it could be something wrong with the graphics card or motherboard :(

  But the vertical lines appear on the external screen? If so, then it must be a matter of Council.
  In this case, you have a lot of possibilities. In my opinion, ask the guy to service for the control of the laptop. The technicians of the service in your country partner could run diagnostics tests and will give you more details about the failure.

  Good luck

• Qosmio G30 - white lines on the screen and BSOD

  1. I have a Qosmio G30
  2 operating system Windows XP MCE
  and I have problem "white lines on the screen ' when windows start to load after that I got the"blue screen of death"and restart the computer.
  I try to get back, but unfortunately came with the laptop recovery CD doesn't seem to work...

  Whenever I finished to recover I have "windows loading files" and once this is done, it shows me the so-called "blue screen of death"...

  Hello

  I m afraid. I have bad news for you ;(
  I think you ve you have a problem with the hardware in my eyes, there might be something wrong with the GPU chip.
  The white lines on the screen could be related to a faulty graphics card and get the BSOD error due to a hardware malfunction or software serious questions

  I m sure that the recovery CD does not contain software problems and therefore only the fault of hardware could be the reason for the lines on the screen and the BSOD.

  In my opinion, you should contact the ASP in your country for assistance if all goes well you guarantee is valid.

  Good luck

• HDMI output on Qosmio G40 - horizontal line on the screen

  I connect my Qosmio G40 to an 46F86BDX of Samsung LCD via HDMI. On all my films, when there is a shift, I see a horizontal line on the screen. Sometimes is in the middle of the screen, sometimes lower.

  I tried my pc with another TV and a different cable, but the same problem. Someone knows the same thing?

  Thanx

  Hello

  > On all my films, when there is a shift, I see a horizontal line on the screen.

  If I understand issue you this horizontal line appears ONLY on and external TV and ONLY if there is some faster movements of the pic.

  If so, then I think it has nothing to do with G40 Notepad.
  I have read that those issues could be related to the new TVs LCD then to watch movies in high definition.

  I think you should read a few tests and reports on similar issues on LCD TVs

  See you soon

• Blue vertical line on the screen of the Qosmio G20

  A few minutes ago, I was surfing the web and from nowhere share an apperead to the blue vertical line on the screen.
  A blue vertical line near the middle of the screen and crosses the screen all the up toward the bottom.

  If I'm looking at a white background, the line is undetectable, but if it is colored, it comes right thru.

  Please don't tell me they are dead... hoooo pixels... I am now, life away from any toshiba repair shop and I get a guarantee...
  I think that I bought 3 years ago. Need urgent help

  Hey Susana

  I wouldn't say it s a lack of dead pixel, but to me, it looks like a more serious problem.
  It looks like a malfunction of the graphics card. But to be sure, you should try to connect the external monitor to the computer and check if the same vertical line will appear on the second screen.

  If you're going to see the same line on the external monitor, then I assume that the question of the vertical blue line might be linked to the GPU fault.
  This could be the case value because the chip graphic card cannot be replaced. You need to replace the whole motherboard :(

  So, as you see it s not easy to solve this problem and I really recommend to contact a technician who has more experience with these laptop problems.

  Good luck

• When we turn on my wife's ipad, a box of red line begins to jump around the screen, and then a pale red stripe moves back on the screen. Any ideas on how to stop it? Thank you

  When we turn on my wife's ipad, a box of red line begins to jump around the screen, and then a pale red stripe moves back on the screen. Any ideas on how to stop it? Thank you

  The standard specifies:

  -Reset the device iOS. Nothing will be lost

  Device iOS Reset: Hold down the On / Off button and the Home button at the same time for to

  ten seconds, until the Apple logo appears.

  -Reset all settings

  Go to settings > general > Reset and tap reset all settings.

  All your preferences and settings are reset. Information (such as your contacts and calendars) and media (such as songs and videos) are not affected.

  -Restore from backup. See:

  Restore your device from an iCloud or iTunes backup - Apple Support

  -Restore factory settings/new iOS device.

  If still problem, make an appointment at an Apple store Genius Bar because it appears that you have a hardware problem.

  Shop Apple Store - Genius Bar

• Pavilion g7-1310us with horizontal lines on the screen

  G7-1310us Pavilion began to have horizontal lines on the screen one day ago. laptop is 8 months old. White lines on the screen. restart does not help. resolution 1600 x 900 of Intel(r) hd graphics family refresh rate 60 graphics 1 696 MB memory driver (20110809)

  If you see these lines in the BIOS and start-up also, this must be a hardware problem with LCD or may be damage also. Please contact HP support for warranty support as appropriate.

  Please contact HP support.
  Please visit http://www.HP.com/cposupport/Loc/ > select the country in the left hand bottom side (USA is selected by default) > on the next page, on the right side, click on the 'connect with HP' icon, you must have e-mail HP options or call HP.

  It will be useful.

• Hi, I just got a second generation ipod nano, and whenever I have unplug the charger a line crosses the screen. Help, please

  Hi, I just bought a used second generation ipod nano and whenever I have unplug the charger a line crosses the screen and I can't do anything with the ipod. Help, please.

  When you do a Reset (reboot) on the iPod

  Learn how to reset your iPod - Apple Support  (see iPod with a click wheel)

  do you see this line on the screen when the Apple logo?  If you do, it is probably a hardware problem.  If the line is not there at the start, but returns after the iPod starts, you can do a restore of the iPod using iTunes.  This d erases the IPO, reinstall its software and sets it to the default settings.

  Use iTunes on your Mac or PC to restore your iPhone, iPad or iPod settings - Apple Support

  If the problem persists after the restore, the cause is likely to be hardware problem.

• Qosmio F10: How do I reinstall the OS from the recovery CD

  Hi all

  I anticipate a full spring clean reinstallation of my Qosmio F10.
  I have all the CDs.
  Any advice on this frightening surgery would be welcome.
  Furthermore, what happened to reactivate Windows. I read that, as it has already been saved once, it might be difficult to rectivate it.

  Thank you in advance.

  Hello

  Recovery delivered image allows simply and fast installation of the software. After the installation of recovery, you don't need to make a record.

  1. simply insert the recovery disc into the CD/DVD-ROM drive.
  2. turn on your PC while keeping the 'C' key.
  3. follow the instructions that appear on the screen.

  All that s!