Vertical lines flickering and the screen is not responding on my IPhone 6 more.

Similar Questions

• Satellite P30 - three vertical lines appeared on the screen

  I have a problem with the display on my p30 110 three vertical lines appeared on the screen, the pc has been scanned with three different antivirus programs and seems to be clean any suggestions would be helpful

  Hello

  These problems usually occur due to a malfunction of the equipment.
  But have you tried to update the graphics driver. If this isn't the case, so I recommend to do.
  The update may solve some problems.

  However, if vertical lines persists then you should ask Toshiba service for assistance.
  He must check the laptop.

• Arm, wrist and the screen does not light.

  I just wanted to give a few comments. When I walk, carry heavy bags and I want to watch the time I lift my arm to look at my Apple Watch and the screen does not light. Maybe its because the movement of the arm is subtle, since I am carrying heavy bags. I was wondering if that could be repaired since both times I tried it, annoyed me. Walk in a street busy NYC with my groceries, I would like to know something, briefly, on my watch as I walk with the duty to stop or to disembark the bags.

  Hello

  It is a community of support based on the user.

  To make sure that your comments and suggestion are presented to the attention of Apple, you can submit the following form (all comments are read by Apple):

  https://www.Apple.com/feedback/watch.html

• HP Envy 15 "touch screen power LED appears, but the fans does not and the screen does not light

  Hello!

  I'm a student in computer engineering at the University of Waterloo 1A, and I run a very serious problem with my HP Envy 15 "TouchSmart laptop computer running Windows 8.1. It is a problem that just started today, and I'd rather have a first support here before going to see the technical support Office sometimes tomorrow. It has to do with the screen and the fans where the Power LED lights in white, just as when the laptop works properly.

  (I have warranty on the laptop when it was purchased last June, except that if I find that I need to get a replacement, I'll lose all my work, I did on that since I started my semester.) It's so silly of me not to have all my work saved on a backup, because I have an external hard drive. Problem is, I've had too many problems in getting myself organized, I'm not being open-minded as I should, and worse, I'm not a balance between life and work at home.)

  Before I had my MATH 117 conference (Calculus 1 Engineering), I was in a nearby lab where my laptop was open and turned, works correctly. I've had NetBeans IDE running since I wanted to work on the second part of my current assignment of CS 137 (principles of programming). Because it was almost time for my presentation, I closed the laptop by simply moving the screen down on the keyboard, where it goes into mode 'sleep'. (Whenever I flip to the top of the screen, the laptop is supposed to return, and the sliding screen of Windows 8.1 connection will appear.)

  When I took my seat for reading, I wanted to spend a little time to work on my programming assignment. However, after the reversal of the screen to the top, instead of having the login screen appears, I encountered the problem: the power supply light is showing a white light, but I don't hear the fans between the ventilation openings on the left side of the laptop and the screen does not light. I tried to take the power for several seconds and once button at least 10 seconds, except that the power light continues to display on a white light. The Commission of the Wi - Fi light is not displayed.

  Whatever it is, I don't want to take out the battery because I have that on my last laptop, and it's from there that I couldn't turn to the former, a new market. If I leave the Envy laptop battery, it will short-circuit the connections between the battery and the computer, and so several components will FRY. For now, what I do let the laptop is to empty the load on the battery. Then, once I noticed that the power light does not project a white light, or plug in the AC adapter and try turning the laptop on the power button.

  It will take a little while for the circuit drain the load on my battery but...

  Anyway, please would you be kind enough to help me with this problem? I would really appreciate if you can give me several recommendations. Thank you!

  Hello @GregPDesWHP,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I read your post on how your laptop is not on, and I'd be happy to help you in this case!

  In order to restore the features of your computer once more, I recommend you follow the steps described in this document on the computer does not (Windows 8). If the problem persists after having exhausted all the steps in this document, I recommend you contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number.

  http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  I hope this helps!

  Concerning

• Blue vertical line appear on the screen of the series M Satellite

  I had a blue vertical line appear on my screen its about inch thick and is at - it start, can someone tell me if I can get rid of him? Thank you.

  Hello

  If this blue line is present from the first second after turning on the laptop that I presume it's because of the faulty graphics card. To be sure try to connect an external display to see the same thing will happen. If Yes, it is the evidence that this line occurs due to faulty hardware.

• My dell Inspiron 1150 windows xp password son has locked and the screen will not change, we do not know the password or have we not the reset disk, how can connect to reset password

  My dell Inspiron 1150 windows xp password son has locked and the screen displays the dell logo and says that I need the master password or administrator, my son can't remember and we do not have the reset disk, is it possible to get and reset the password or enter the system

  If you are using XP Home Edition, the built-in Administrator account probably doesn't have a defined password. You can start in safe mode, where this account will be selectable when connecting. It allows to connect and change the password of your normal connection.

  To start in safe mode, keep hitting F8 twice a second after turning on the PC until you get the start menu where safe mode is selectable by the up/down arrow keys, and then press ENTER.

  If you are using XP Professional, try to connect using the built-in Administrator account. You don't need to do it in safe mode (although you can if you wish). If your normal login screen is a display of the user symbol and hit ctrl-alt-del twice to get to login to text entry. Type administrator as the user name and try a blank password.

  See also http://support.microsoft.com/kb/321305

  Tricky

• just got a new lenovo y50 and the screen does not come

  Hello.. I had a y50 lenovo a day ago. I loaded and when I turned it on the custom screen shows something... it won't turn... Only the lights on the keyboard upwards
  Thank you

  thx for your help... .but I guessed it was a connection problem... so when I opened, I find that the cable between the motherboard and the screen was loose... then it worked, I saw the language and region settings

• Problem starting el capitan (sierra) - built-in keyboard and the mouse do not respond

  Hello

  I have a 2015 macbook pro (SSD 256, 16 GB of RAM last el capitan updated) with a wired problem.

  I use it mainly to a cinema monitor and I use wireless keyboard and mouse (office installation program), and of course as a stand-alone laptop when I'm not at my desk.

  When I put the laptop to sleep, everything works fine when I wake up.

  but, if I'm away from the office and I have to restart my laptop, here is the problem.

  The boot process is very very slow, there is no edge, and when I finally have the screen to unlock the safe, the keyboard and the touchpad do not react. Actually, that's not exactly true, they are so slow that they are unusable and get caught quickly, all gel. So I can't unlock and complete the boot. My laptop is unusable ;-(

  At this point, I get a message that if I forgot my password I just need to reboot by pressing the power button, and I'll be able to reset it.

  When I do this and aprΦs the dΘmarrage that more slowly than usual but ok, I get another screen with several options of problem solving. One of them is "keyboard not responding do not. When choosing this one, it asks if you want to remove safe. I tried and everything was back to normal.

  later, I delivered safe and I had the same problem again. I did the thing to be able to restart again and improved to sierra in the hope that it would disappear. However, the problem is still there.

  I thought I could try to restart my office to see if my keyboard and wireless mouse would still work. Indeed, even if responsiveness was not normal, I could unlock and fill the chest.

  I have the impression that my laptop always "believe" it is on my desk, linked to my screen (probably the reason why I don't hear the Bell) and to my wireless K & M.

  It's really annoying and I hope someone has a solution.

  Thank you very much

  best,

  Alex

  I'm having a similar problem with macOS Sierra which I didn't have with El Capitan.  I can possibly move the cursor on the power button and turn off (no), but I must be patient because the keyboard and trackpad are only for a fraction of a second, which only allows me to move the mouse slightly.  After he stop and start back up, everything is perfect until I tried another reboot, and then I'm back to the beginning.

  I tried to reinstall the operating system, reset the SMC, resetting the NVRAM, reboot in SafeMode... nothing worked so far.

• White vertical line appeared on the screen.

  A vertical white line appeared about 3 inches from the left hand side on my Dell Studio 1749.  It started about 1 mm wide, but increases in width and is now about 4 mm wide.  There is no problem on an external monitor when connected.

  Is this likely to be a problem with the Panel or a chip problem?

  Thank you.

  Yes, probably would have worked, but I just replaced the screen in the end.

  Thank you

  Ian

• My Macbook has big bumps and the screen does not close.  Can it be fixed?

  Previously, a fallen friend my 2013 non-retine Macbook Pro 13 inches on one floor wood to six feet in the air.  After the landing, my laptop proceeded to bounce back, and when I picked it up, he had a gargantuan tooth in the DVD player (see these images: http://imgur.com/a/CDg3R). I also noticed that the screen closes nor completely, even when I press on toward the bottom.  Y at - it repairs I can do?  Or is it better for me to buy a newer, more stylish mac?  What is the least expensive?  Thank you!

  Bend it back... with care. We could break it. Even if you do not, the result will be ugly... but it will be a character.

  Or is it better for me to buy a newer, more stylish mac?

  If you want to know whether it pays to pay Apple to fix it, the answer is that such a remedy will be almost certainly economically unjustified. I suggest Flex things up, so that you can continue to use it.

• Absent from the bar spots and the screen is not good

  Original title: move screen up

  How can I move the windows screen?   Can't see my bottom toolbar?  There is about 1/2 space black above the windows open or even the windows page.   I have also two windows superimposed in facebook.   I can't click on the rear window to get rid of it.   When you play games farmville, pioneer trail, etc.  I have to click on things about 1/4 inch to the right of the object.   At the top of the screen is about 1/2 inch on top and to the left.   How do I get this all to move to adapt to the screen?

  Any help would be appreciated.

  I got the problem fixed with the double screen to upgrade my Intel HD Graphics Family.

  I use windows 7 on a HP Pavilian laptop g6.
  The only problem I have now is that I connect the laptop to my gateway FPD2275W TFT LCD Moitor as its bigger and easier to see.   Now on this gateway monitor I have space black above the scree so unless I do my toolbar on the largest background I can hardly see it.  I used for the button on the side of the monitor auto fit my picture and it runs for about 2 seconds and then it lowers the screen again.  I have the resolution set on this 1680 X 1050 monitor, which is the recommended setting.   If I liked I receive frequency out of range.
  All this began after I clicked on the key in google and went on google chrome and it updated something.
  Those that this isn't a big problem is possible to raise the screen on the monitor so that it is using the entire screen and not to leave about 1/4 to 1/2 black space at the top?
  Thank you for your help.

• Windows 7 Ultimate lights up and the screen does not display on my screen

  The title says it all.

  Hi Brandon,.

  Thanks for posting your query in Microsoft Community.

  It is regrettable that the PC does not turn on and I'll be happy to answer your query. Let me ask you a few questions to help you accordingly.

  • What is the brand and model of the computer?
  • Remember to no particular change in the computer before the show?
  • When was the last time you were able to use the PC?
  • Do you have Windows 7 repair disc?
  • Do you have connected an external device to the computer (except keyboard and mouse)?
  • When you try to start, you are able to display the logo of the manufacturer?
  • You are able to start the computer in safe mode?

  There could be several reasons according to the questionnaire above for this issue, including hardware as well. Hardware and software configurations can vary considerably, there are several ways that you can take to solve problems that might prevent Windows to start (boot) correctly.

  I ask you to follow the steps described in the article below:

  What to do if Windows does not start correctly (information valid for Windows 7)

  Notes: Please, don't try installing and reinstalling Windows section from now.

  Important: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed after this date are deleted.

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

• HP Jet 8: HP flow 8 tablets. The screen is not responding after dong a reset.

  I'm trying to recover a Tablet HP flow 8 because the latest version of Windows 10 locked up the tablet.  The problem I have is when I start the Tablet either by using the power button or reset the sequence (the volume down and power on), I get a message «has requested a change of the TPM on this computer configuration...» "with a Yes or no option to proceed.  The question is when I press the screen to answer 'yes' or ' ' nothing - happens the screen is inadmissible.  I have attached a keyboard and mouse to the Tablet hoping I would be able to complete this option, but nothing happens.  I have attached a CD-ROM with a 8.1 to windows boot disk and nothing happens.  Basically, I'm stuck with the brick.

  Any suggestions or help would be greately appreciated.

  Kind regards

  Mike Perrotto

  Hello, you use an OTG adapter and a USB hub powered to fix the keyboard and the mouse, and it still does not accept your entry?  You could try just the adapter of the OTG and the only keyboard.  Otherwise, try to turn on while raising both the volume and volume keys together to reset the BIOS.  If this does not work, try to leave completely discharged battery to reset the CMOS.

• Retina, 15 inch, mid-2015 MacBook Pro number: flickering and the screen splitting

  Very happy user of a Macbook pro 2011, I thought about buying a new macbook pro 2015 15 ", 16 GB of ram, 512 GB of flash disk... I hope to have a new Mac, who suffer no lack of memory, and much faster.

  It's faster, for a week. Happy.

  Then, flicker from time to time, very fast, only 10 to 15 Hz strange flickering (turning slightly gray, at a frequency that really annoys the eyes).

  Then, split screen sequential, as in the video below.

  https://youtu.be/yC1qTuE4RTc

  (graphics card: AMD Radeon R9 M370X 2048 MB)

  Tomorrow the call Apple support... but what happens? I think to send to them and it wiped out? going to do a backup now.

  Same problem for me with exactly the same characteristics:

  https://www.YouTube.com/watch?v=oViKaiSVwlM&feature=youtu.be

  Look here:

  Macbook screen retina 2015 flashing

  For now, I guess that apple has no solutions to provide...

• My iphone screen has gone completely blank. I can still talk to Siri via activation of the voice and the phone still makes a noise when I plug it into the charger, but the screen does not respond.

  white screen

  Try a forced reboot. Hold the home button and power at the same time until you see the Apple logo. About 20 seconds or more.